If you were going to ask for a transmission cooler recommendation for a 2019 Jeep Grand Cherokee then I would recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit part #D13502 which is going to be the perfect size. The Flex-a-lite…
When comparing the Flex-a-lite Transmission Cooler #FLX400117 to the similar Derale Series 8000 Transmission Cooler #D13502, there are very few differences between them. Both have an aluminum construction, include all hardware needed, and are…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
The Class of transmission cooler you use will depend more on where you can mount it. The most efficient place is in front of the AC condenser. You could then use a Class I cooler, like #D12901. If mounted behind the condenser, I would go with a Class…
For a transmission cooler that would work well on your 2005 Acura MDX the Derale part #D13503 would be an excellent choice. Since this is a larger cooler at 11" Wide x 8-3/4" tall x 7/8" deep it would work great for if you wanted to…
When comparing the Draw-Tite Ultra Frame Trailer Hitch Receiver - Class IV, part #41929, to the Curt Trailer Hitch Receiver - Class IV, part #14361, they are similar, but the new version of the Draw-Tite #41929 is rated higher. The Draw-Tite Class IV…
The Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #41929 will sit 9 inches from the bottom of the vehicle frame rails to the top of the receiver tube. This will work well with the ranch hand bumper you have and…
I'd be more than happy to help out! The Flex-a-lite Transmission Cooler #FLX400117 has mounting holes that measure 6-1/4" across and then 2-3/4", 2-7/8", and 2-3/4" side to side as you can see in the attached photo. The…
When it comes to choosing a transmission cooler, you would ideally choose the largest cooler that will fit in the available space. Since the recommended spot to install the cooler is directly behind the grill in front of the radiator, you'll need…
I measured this jack, Item #TJBB-2001-B, in our warehouse. It measures 15-3/4 inches from the footplate to the top of the outer tube. It measures 17-1/2 inches from the footplate to the top of the jack when the handle is folded in. I've attached…
I went out to the warehouse and pulled an etrailer trailer jack #TJBB-2001-B. From the center of the mount to the bottom when retracted is approximately 11 inches.
Using a lift is certainly the most convenient way to go, but is not absolutely necessary. When I installed the hitch on my van, I did not need to raise the vehicle at all. Having the vehicle on jack stands or ramps would make your installation easier…
What our customers are saying:
"very easy to shop"