"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."
Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…
Appreciate the photo, and there is a way to add a platform rack to your 2020 Chevy Suburban, but not the LockNLoad; instead, what you'd need is one from Rhino-Rack, which is the following part number: - Rhino-Rack Pioneer Platform Rack with…
The Titan Replacement Master Cylinder Assembly #T4395100 is a direct replacement for Model 60 and Aero 7500 drum brake actuators. I measured this item and put the dimensions on the included photo. Overall assembled height including the filler cap is…
Thanks for the pictures! It looks like you have a TCIC 23361 master cylinder. The Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators item #T4395100 is the replacement for it. However, this is a drum brake master…
The DICO 189 you referenced is the older version of the Titan 60. You will want to replace the master cylinder with the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100. I've attached a video…
The Titan 60ZX7000 brake actuator is a Model 60 actuator, and you do have the correct part for a replacement master cylinder: - Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 So this will work…
There is a full replacement master cylinder that also includes the filler cap, orifice fitting, and hardware. The correct part for your Model 60 with drum brakes is the following: - Replacement Master Cylinder Assembly #T4395100
The replacement master cylinder #T4395100 does come with the snap ring, spring, seals all behind the boot. I made a video showing what it looks like with the boot off.
I spoke with my technical contact at Titan and showed him the photo that you sent in of your actuator. My contact confirmed that you actuator is a Model 60. The right replacement master cylinder for you will depend on what kind of brakes the actuator…
We don't know exactly what bearings you would need for your trailer but I can tell you how to determine that information. You will want to take your hub off of your trailer and remove both the bearings, there will be a number stamped on them that…
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."