"Definately I will order from here again if I need anything. Not only was the service fantasic, the price was over welmed dirt cheap compared to so many others on the internet. The order was very professionally packaged and delv'd. I love this place. Definately I will be a returning customer."
Hey Ty, what size hitch do you have and how much of an extension do you need? The Curt extension part #C45048 that you referenced fits a 2-1/2 inch hitch and provides a 24 to 36 inch extension.
For a jack that is similar and has a bolt-on installation I recommend the Trailer Valet JXS Trailer Jack w/ Footplate #TV64FR. This is a sidewind swivel jack with a 5,000 lb support capacity that fits a frame up to 4-3/4" tall x 3-3/4"…
Hello Greg, thanks for reaching out. Yes, the Trailer Valet JXS Drill Powered Drop Leg Trailer Jack w/ Footplate #TV36FR will indeed fit a 6-1/2" tall 4" wide I-beam frame. The bracket will fit frames up to 6-1/2" tall and 6" wide…
Hey Matt, since you have a slight grade I would instead recommend the Trailer Valet 5X part #STC-V211 over the #ORJW1SU. The #ORJW1SU requires releasing tension in the crank that turns the wheel every time you go to crank the wheel further so I would…
There is no weight rating for the Mounting Bracket, part #TV-0002. It is designed to replace the bracket for the Trailer Valet Trailer Jack, part #STC-V211. The Trailer valet has a weight capacity of 500 lbs. You may be able to install a different…
The mounting bracket for the #TV34FR is actually identical to the bracket on the #TV64FR that you were looking at. The holes are 1" apart on center vertically, and 5-1/2" apart horizontally. I have attached a picture for your reference.
When using the Trailer Valet with a tandem axle trailer it is recommended to use the Trailer Valet Trailer Wheel Dollies #TV56FR under the rear wheels. The dollies will provide you with much better turning radius, as the tires will try and bind up…
Hey Michael, thanks for reaching out about the Trailer Valet MV PRO Trailer Dolly #TV96FR! Yes, you will place your electric drill in one mode for forward motion and in reverse mode for backward motion. Trailer Valet tried to make it as simple and…
Hey Scott, great to hear from you! The Trailer Valet JXS Drill Powered Drop Leg Trailer Jack w/ Footplate #TV36FR will fit trailer frames up to 6-1/2" tall x 6" wide so it will fit perfectly for your application!
The Trailer Valet XL part #TVXL25 that you referenced can handle small inclines pretty well as long as the ground is paved or concrete. If it's gravel or grass I wouldn't recommend what you are trying to do. In the demo video I attached you…
Hi Dale, Good catch, and I checked directly with EcoHitch for you and found the EcoHitch Stealth Trailer Hitch Receiver #306-X7201 has a 4,000 lb towing capacity and 400 lb tongue weight capacity.
Hi Emily, Before buying anything you'll want to verify that both the Pilot and the trailer hitch installed on it are rated for use with a weight distribution hitch (WDH). From what I can see Honda does not recommend it because it can shift the…
What our customers are saying:
"Definately I will order from here again if I need anything. Not only was the service fantasic, the price was over welmed dirt cheap compared to so many others on the internet. The order was very professionally packaged and delv'd. I love this place. Definately I will be a returning customer."