2007 Nissan Murano Roof Rack by Inno
Roof Rack Includes:
Inno Square Crossbars - Steel - Black - 54" Long - Qty 2
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet
Part Numbers: INB137,INSUT,INK312
This item qualifies for Free Shipping
Inno Square Crossbars - Steel - Black - 54" Long - Qty 2
part number: INB137
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
- Square crossbars let you build a roof rack for your vehicle
- Pair with Inno feet and custom fit kit to create a complete roof rack
- Standard square bars provide exceptional load support
- Clamp-on carriers and accessories conveniently wrap around bars
- Elastomer coating helps to prevent rust and cushion your load
- Endcaps keep out dirt and water
- Hardened steel construction is strong and durable
- Black color
Specs:
- Quantity: 2 crossbars
- Weight capacity: 220
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 54" long x 7/8" tall x 1-1/4" wide
- Limited lifetime warranty
IN-B137 Inno Standard Square Steel Load Bars - 54" Long - Black
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4
part number: INSUT
These durable, pivoting feet help you mount 2 Inno square crossbars to your vehicle's naked roof. Torque-control knob prevents overtighting. Locks and keys included. Tool-free installation.
Features:
- 4 Feet let you mount Inno square crossbars on your vehicle's naked roof
- Pair with 2 crossbars and a custom fit kit (sold separately) to create a complete roof rack
- Bases pivot to ensure crossbars are level on your roof
- Locking torque knobs secure system to your roof
- 2 Keys included
- Durable, weather-resistant AES plastic construction
- Tool-free installation and removal - no drilling required
- Torque knobs prevent over- and under-tightening
- Black color
Specs:
- Stay height: 3-7/8"
- Weight capacity: 132 lbs
- Always observe your vehicle's maximum roof load capacity
- Limited lifetime warranty
IN-SUT Inno Roof Rack Stays for Bare Roofs - Black - Qty 4
Replaces Inno INSU-K5
Item # INSUT
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet
part number: INK312
These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.
Features:
- Custom-fit clamps and pads let you install Inno roof rack feet on your vehicle with a naked roof
- Works with XS200, XS250, or INSU-K5 feet
- Pairs with 4 feet and 2 crossbars to create a complete roof rack
- Clamps are designed specifically to fit the curves of your doorjambs
- Mount to roof rack feet with bolts
- Molded pads are custom designed to fit the contours of your roof
- Protect your roof surface from scratches and abrasions
- Press onto the bottoms of your roof rack feet
Specs:
- Quantity: 4 clamps and pads
- Limited lifetime warranty
K312 Inno Fit Kit Hooks for Flush, Through, and INSU-K5 Stays
Item # INK312
Video of Inno Square Crossbars - Steel - Black - 54" Long - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Inno Roof Rack Installation - 2018 Chevrolet Traverse
Hi everyone. It's Evangeline, right here at etrailer. And today, we'll be taking a look at our Inno Roof Rack System with the Inno Square Crossbars, the Inno Feet for Square Crossbars, and the Custom Fit Inno Fit Kit on our 2018 Chevrolet Traverse. So, this is the Square Roof Rack System from Inno. You have different options for your Chevrolet Traverse. You could get Aero Crossbars, which are that more modern crossbars, or you could get these Square Crossbars.
Some reasons you might like them, is maybe you have older accessories that can only fit around square crossbars, or if you want something lighter, or if you want more overhang and have the ability to do so, you can with square crossbars. You do get an overhang of 2 1/4 inches of overhang from the tower to the endcap. So, this will determine, if you do have other accessories, let's say kayak carriers that require a little bit more overhang, you can very easily upgrade to longer crossbars if needed. The crossbars themselves have a weight capacity of 220 pounds, which is very impressive. But remember, you are limited by whichever is lower of the weight capacities, be it your crossbars, your towers, or your actual roof weight capacity.
In our case here, our Inno Feet for Square Crossbars has a weight capacity of 132 pounds. So, that's kinda being pretty much a limiting factor. Now, this is a lockable system. Meaning once you have these keys, you could just put them right into your towers, and this allows you to loosen or tighten down your towers and just help deter theft of your roof rack. While the Traverse can have raised side rails, or it might also not have raised side rails, in our case here, this is a naked roof, so we do have this custom-fit kit for our roof.
Now, the downside to that is you are limited to a very specific spot on your vehicle to place those towers, which gives you a crossbar spread of 26 inches from this point to that point. And that will be the crossbar spread that you will have to use with whatever accessory you have on there. I am five two, and as you can see, it's kind of a reach to get onto the top of our Chevrolet Traverse, which may be something worth considering with getting more or less overhang. Another thing I recommend adding to your repertoire is maybe you should take a look at the Moki doorstep, which hooks right into your door and gives you a little extra height, which may be useful as you have a roof box, a roof basket, or let's say you're strapping down a kayak. Now, let's talk about roof clearance.
So, first is the clearance from the lower crossbar to the top of your roof. That's gonna be the clearance for your clamps, or if you have skis and snowboards, you wanna see if there's enough space for your bindings before they hit your roof. So, measuring from the roof to the crossbar, it's at about 3 1/4 inches. As for the roof height this adds to your vehicle, it sits at about 4 1/4 inches. The crossbar itself is made of steel, but it is coated with this rubberized material, which is gonna help with scuffs and scratches, but also keeps this system on the lighter side as it's on your booth, but while maintaining its great weight capacity. So, my personal thoughts about our Inno Roof Rack here on our Traverse, is I do like the Aero Style Crossbars, simply because I like to use the more modern accessories that utilize the T-track channels, and things like that. But, I do understand that others still have accessories that work best with the square design on your more traditional crossbars. Also, they do sit a little bit more low profile, and they're on the easier side to throw on, compared to the Aero Crossbars from Inno. So, you have your pros, you have your cons. I personally recommend upgrading to the aero system if you can, but if you need that extra overhang, this is still a good system that will work on your Traverse. So, the install process is kind of involved, but that's what this video is for, right Because, we wanna make sure that you get the correct rear crossbar and the front crossbars in the correct places. You're gonna have three sets of things, which is gonna be your fit kit, and those have different foot pads with different numbers. Then you have your towers, and these are gonna be what's holding your crossbars up in place. And finally, you have your square crossbars. So, first we're gonna set up the fit kit with the tower. Notice how your fit kit has a number underneath the foot pad. So this is four two seven, and that's gonna go on your front crossbar. And then you're gonna have another set, which is four one nine, and those go on the rear crossbars. Since I already installed the rear crossbar, we can install the front crossbar together. So, get your foot pad and just pop it into the tower itself. Once those foot pads are set up and secure, you're then going to set up the fit hooks. So, you may have a lock on the end of your tower, kinda like what I have here, so that has to be unthreaded first. Once that's out, you also have this lock, and that's gonna go to the side as you place your hook in, kinda fit that into place, and then get this lined up as well. And do the same thing on the other tower. With your towers now set up, you can then attach the towers to your crossbar. So, notice where this lock is. If you push that lock down, you can see how the bracket on the top of your tower goes down as well. So, get that lined up and just push that down, because that's gonna be what you'll use to attach your crossbar. Once you have that push down enough, it should slide right onto that crossbar. Now do the same on the other side, and then you can take some measurements. So, you're gonna measure the stay interior dimensions. And what that means, is measuring from one crossbar tower to the other crossbar tower. You're gonna get a specific length. That length is going to be inside your instructions. It's gonna be different for your front and your rear. So for your rear crossbar, which is this, it's going to be 47 1/4 inches long. To also make sure that your towers are in the right spots, Inno gives you the halfway mark instructions as well. So for your rear crossbar, it's gonna be from the center of the crossbar, there should be a marker on your crossbar, all the way to the end of the stay. It's going to be 23 5/8 inches to that point. So measure it and then address it accordingly. And now that we have our tower set to exactly where we want them to be, the next step is to put it onto our vehicle, but first let's take some measurements. So, you're gonna install your towers at a very specific point on your Chevrolet Traverse. So, for your rear tower it's going to be from the seam of your door, 21 3/4 inches to the center bolt of your tower. And then for your front crossbar, it's gonna be four inches from that seam towards the front of your vehicle. So, I have my friend, Tom, here, who's gonna help me out. We're gonna bring this up and over our vehicle, being very careful as we open the door, and then place it four inches away from that door seam. So, once you determined that it is four inches from that front seam, you're gonna then going to lift this hook up, and tighten this bolt down. It's a good amount of thread, so just keep going until it fully secures. Once you feel like you've gotten it tightened enough down, push this in, and then twist the lock to secure it. So, since that hook is custom-fit for your vehicle, once you do have it tightened down, don't be afraid to just slam your door on it, because it fits right in there. Don't forget to put the rubber endcaps onto your square crossbars. And once all four of those are in place, that's it for the install. And that was a look right here at our Inno Square Roof Rack system, here on our 2018 Chevrolet Traverse. My name is Evangeline, and I hope you enjoyed the journey..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Inno Square Crossbars - Steel - Black - 54" Long - Qty 2 - INB137
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 - INSUT
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet - INK312
Average Customer Rating: 4.7 out of 5 stars (1054 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars. These durable, pivoting feet help you mount 2 Inno square crossbars to your vehicle's naked roof. Torque-control knob prevents overtighting. Locks and keys included. Tool-free installation. These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.by: Linda S07/20/2021
2015 Ford Explorer
This product exceeded my expectations!! Fit my 2014 Explorer with no issues. Extremely easy to install- took about 15 minutes, these crossbars are sturdy and fit perfectly in the INNO feet that secure to the roof rails- I will be hauling 2 paddle boards and have no doubts that they will travel well. I recommend this product !!
Comments
Love this product -they still look brand new after a year - stored them over the winter and they are so easy to put on and take off. I am ready for paddle boarding.
Linda S - 07/21/2022by: Alberto11/22/2022
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
by: Brett09/20/2022
Awesome rack for the money!! I’m sure there are better racks, but wind noise is low and it’s solid.
by: John07/01/2022
2014 Ford Escape
Rack works great with my 2014 escape carrying a heavy 14 ft old Town and a 10ft kayak. Service is great, was missing 2 endcaps called them up and they sent them out next day.
by: James06/06/2022
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
by: James06/06/2022
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
by: David05/10/2019
2016 Ford Focus
The kit etrailer put together contained all the parts I needed. It took a little figuring to determine how to put it together, but in total only about 30 minutes from box opening to mounting. Now that it is all sized and spaced, it should be much quicker to remount in the future.
I installed it on a 2016 Ford Focus hatchback. I am planning to carry a Thule Cascade 1700 XT rooftop carrier.
So far it looks good. The price was excellent. While driving, it has a bit of an humming noise, but it is not loud or annoying. I like that it has a full set of keys.
All told, it seems like a good product at a reasonable price point.
Comments
After 1 year, I am quite happy with my roof rack. I have used it for many cross-country trips, camping trips, and one move. It continues to perform well. I am glad I bought it. I have made marks with a dark red marker on the door frames to mark where to align the clamps. You cant see them without a bright light at the right angle, but they make alignment fast and easy. Now I can rig the bars and carrier in about 20 minutes, and be certain everything is in the right spot.
David M - 05/11/2020by: H. B.08/21/2017
2014 Ford Flex
First and foremost… YES! I would recommend this product to anyone, so def. read further. Price wise… well below what the more known name brands wanted for a similar setup. Product is well made , but if I had to point out one defect… the rubber shoe the rests between the factory roof bar and the inno feet detaches easily during install (see photo). I will figure out how to securely attatch it when I remove it, because (IMO) it's not one of those units that remains on perminantly.
Comments
Still satisfied… good buy… definitely recommend.
H. B - 08/21/2018by: Kevin 07/13/2022
Bars are solid - durable and strong with straight forward installation instructions. Only knock is that they are extremely noisy, especially at higher speeds.
etrailer made it easy to find the right product for my car, had fast delivery, fair prices, and good customer service.
by: Jessica07/07/2021
Just finished installing on my 2021 Toyota Tacoma. Do not waste your time with the cheap paper tape measure that’s my only negative complaint.. other than that the price was right and it looks great! I had to wait a couple months for back order parts but we’ll worth the wait! I have not driven with it yet so I’m assuming there will be wind noise but I’m used to that with having a Jeep renegade as my last vehicle with the cross bars. I’m excited to haul my kayaks!
by: Hunter02/26/2022
Rack detached from my roof on the highway at about 70mph, taking my cargo container with it. Luckily, no one was behind me as it would have very easily caused an accident. Customer service was terrible and didn’t accept a return. Damaged the contents of the cargo container.Do not buy this product or from this company as they will not help.
Comments
There are a lot of factors involved when installing and using a roof rack. For the 2018 Ford Focus Sedan the roof rack capacity is 120 pounds although you would want to also check that the manual says for the vehicle. Before tightening anything down you will want to look at the instructions to find the proper spread between the bars and also the feet. Once that is down you will take the included Allen tool and tighten down the bolt. Next you will install the fit kit which will have you start with the foot pad. The foot pad will line up with the holes at the bottom of the foot. These will push into place and are numbered so that the right pad lines up with the right foot. To install the clamp you will remove the screw from the outside and loosely tighten it up to hold the clamp into place. The next step is to measure from the center of the doorjamb you will get the measurement to the center of the bar. You will find this in your instructions. Repeat on the other side. Then you will take the tightening tool and snug it up against the door. You will do this on the passenger side as well. Then you will go back and forth from drivers to passenger side giving about five or six turns each time until its completely tightened down. When it makes the clicking sound you will know its completely tied down. You do not want to over tighten it.
-- 
Jenny N - 03/04/2022by: Chris D.10/20/2021
Perfect fit for my '22 Kia Sportage. Works great, took a kayak trip out on the lake 10 minutes after installing. Initial setup was simple and easy. Once all the components are configured and you're familiar with setup, all future removals and re-installs will be a breeze, won't take more than 5-10 minutes to install or remove.
by: David03/04/2019
They look good the only problem is that the brackets that grip the rail are too straight so that the pads do not meet the roof and they bend the crossbar
Comments
Per your photo, I can see you have the vehicle specific clips attached to holes in the roof rail. The clips are meant to install at the tops of the door jambs. Once correctly installed, everything should fit great for you.
-- Mike L - 07/25/2019by: Hunter02/26/2022
Rack detached from my roof on the highway at about 70mph, taking my cargo container with it. Luckily, no one was behind me as it would have very easily caused an accident. Customer service was terrible and didn’t accept a return. Damaged the contents of the cargo container.Do not buy this product or from this company as they will not help.
Comments
There are a lot of factors involved when installing and using a roof rack. For the 2018 Ford Focus Sedan the roof rack capacity is 120 pounds although you would want to also check that the manual says for the vehicle. Before tightening anything down you will want to look at the instructions to find the proper spread between the bars and also the feet. Once that is down you will take the included Allen tool and tighten down the bolt. Next you will install the fit kit which will have you start with the foot pad. The foot pad will line up with the holes at the bottom of the foot. These will push into place and are numbered so that the right pad lines up with the right foot. To install the clamp you will remove the screw from the outside and loosely tighten it up to hold the clamp into place. The next step is to measure from the center of the doorjamb you will get the measurement to the center of the bar. You will find this in your instructions. Repeat on the other side. Then you will take the tightening tool and snug it up against the door. You will do this on the passenger side as well. Then you will go back and forth from drivers to passenger side giving about five or six turns each time until its completely tightened down. When it makes the clicking sound you will know its completely tied down. You do not want to over tighten it.
-- Jenny N - 03/04/2022by: Kevin 07/13/2022
Square foot kit is durable and secure. Only knock is that they are extremely noisy, especially at higher speeds.
etrailer made it easy to find the right product for my car, had fast delivery, fair prices, and good customer service.
by: Lynn07/21/2021
Easy to install. I’m happy with the product. Shipping took agile but worth it! I added kayak racks and now I’m able to enjoy my life a little more.
by: Lisa07/23/2020
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
by: Zachary07/03/2022
Super versatile and nice looking. After a year, the rubber coating has been damaged in a few spots, but that's entirely understandable, as I have frequently used these bars to transport my 17 ft aluminum canoe. These square bars are sort of loud, and seem to affect the fuel mileage of my Prius by a little bit. I would probably buy the more aerodynamic ones if I had to buy them over again.
by: Sean D06/01/2019
Waited till I put the new rack to work before review. Used it the first time today and it worked Great. Seems like a very durable rack system. Love that everything is rubber coated so it doesnt scratch the paint on your car. Installing instructions where a little confusing but found YouTube videos from etrailer on how to install exact rack system.
by: Taylor05/19/2022
Kia Sportage
These racks are great, I did a ton of research to find something that would work for me since I didn’t have roof rails on my Kia Sportage. There are a lot of small pieces so installation was a little intimidating but it went smoothly. I’m not planning on using them for a ton of weight and more for looks. I’m not sure how they’d hold up as functional racks.
by: David08/12/2018
2017 Chevrolet Cruze
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
by: Bradley07/16/2020
2003 Toyota Tacoma
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
by: Grace07/22/2020
Great product so far! Just installed the roof rack on my 2015 Ford Fusion and everything was straight forward. I’m excited to use it while kayaking and traveling!
by: Chad K.03/07/2021
Perfect Fitment for my 2012 Ford Escape, etrailer.com's fitment guide was spot on.
by: Ben05/05/2019
I did the research for a while looking at many different brands for a good quality crossbar at the right price. I came across this one a Japanese brand. As I read more about the brand it has been popular in Japan. I know Japanese product are top quality.
The crossbar, the footing and keys are made with high quality material. Instruction was very clear. Installation took about 10-15 minutes. I love that no tool required to do the install. No wind noise that I can hear at low speed. Have not tested at high speed yet. Overall, highly recommended to anyone looking for a crossbar from a great less polular brand but half the price of other more popular brand.
25
781
Show More Reviews Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
- Will Inno Roof Rack for 2016 Kia Optima Allow Water to Leak in to Vehicle
- The door clamp style of roof racks like the Inno part # INB137, # INSUT, and # INK685 do not allow water to leak into the vehicle. If you check out the picture I attached you can see that the clamp actually fits above the door seal.
view full answer... - Weight Capacity For The Inno Square Bar Roof Rack System For My 2019 Kia Sportage
- The Inno Square Bar System # INB137 # INSUT # INK686 you will have 132 lbs of dynamic weight capacity. That is the amount of weight you can have on the roof rack system while driving. Plenty of weight for a cargo basket like this one # Y07138.
view full answer... - Inno Roof Rack and J-Style Kayak Carrier for 2019 Honda Civic Hatcback
- The Inno square bar roof rack part numbers # INB137, # INSUT, and # INK684 is a great roof rack for your 2019 Honda Civic hatchback with a naked roof to carry kayaks. It's a higher quality square bar rack at a much better price than similar quality racks so it's best value as well. Then for a j-style kayak carrier that would fit this rack well and is padded the Thule Hull a Port # TH834 would be an awesome choice.
view full answer... - Replacement Square Bar Solution for Older Thule Square Bar Roof Rack
- The older style of Thule square bars are no longer made but I do have a solution for you. The Inno square crossbars are the exact same dimensions and will fit your Thule feet so you'd want the # INB137 for a set that is 54 inches long.
The new Thule square bars attach to the feet with a track on the bottom side of the bars instead of the feet grabbing around the bars.
view full answer... - Square Crossbars Compatible with Older Thule Crossroad 450 Feet
- The old Thule Crossroad 450 Feet were compatible with the Thule square crossbars that were a whole all the way around. The new Thule SquareBars have a slit in the bottom so they only fit the standard Thule feet and aren't compatible with the older 450 feet so we need to look to a different manufacturer.
We have actually found that the Inno Square Crossbars have the same dimensions as the older Thule crossbars so they will be compatible with the older Thule feet like what you have. I
view full answer... - Which Roof Rack And Kayak Carrier Should I Use On 2012 Kia Optima With Sunroof
- Yep! The Inno Roof rack you were looking at that uses part numbers # INB137, # INSUT, and # INK607 are indeed confirmed to fit your 2012 Kia Optima with the sunroof. Now, most roof rack manufacturers state that you should not operate the sunroof when a roof rack is installed as this could cause damage. However, some racks do allow enough clearance for the sunroof to slide open or even vent open.
This system typically offers about 3-1/2" of clearance between the bottom of the crossbar
view full answer... - Do the Inno Square Crossbars fit the Thule Pass Through Foot Packs
- Yes the Inno Square Crossbars part # INB137 are the same 7/8" tall and 1 1/4" wide as what the original Thule Square bars were. They will work with the older Thule Foot Packs for square bars like part # TH450. As you know they are a pass through style bar so you have the option of using any length cross bar you would like.
I generally stay inside the vehicle mirrors because it gives you a good reference point of how wide they are on the rooftop.
view full answer... - Roof Rack that Fits 2014 Mazda 3 and 2014 Subaru Legacy
- The best option we have would be a roof rack that is mostly the same that fits your 2008 Mazda 3 and 2014 Subaru Legacy but with different fit kits since the roofs are different. So what you'd want is the Inno Square Roof Rack part # INB137, # INSUT, and # INK851 for the 2014 Subaru Legacy and then use just the different fit kit # INK794 to fit the bars and feet to your Mazda 3.
view full answer... - Roof Rack Recommendation for Carrying a Kayak- 2019 Ford Escape with Bare Roof
- I'd highly recommend an Inno rack system for your vehicle. Inno provides a super-high quality product without the higher price tag seen with other brands that might be more universally well known. High value and top quality.
Given the fact that you expressed an interest in transporting a kayak, using a through-bar system makes it easier for one person to get the kayak up on the vehicle roof. Pick up one end, place against the crossbar where it extends past the roof rack foot, then you
view full answer... - Recommended Roof Rack and Kayak Carrier for 2018 Honda Civic 2 Door
- For your 2018 Honda Civic 2 Door with a bare roof I recommend the Inno Aero Bar Roof Rack because it will provide you with the quietest rack available for your vehicle. This system consists of # INXB130-2 for the two 51 inch Aero Crossbars, # INXS250 for the Inno Through Feet, and # INK683 for the Custom Fit Kit. In addition to reducing noise during travel, the aero-style bars also offer a really sleek appearance and plenty of capacity to support your 2 kayaks.
I have attached a short
view full answer... - What are the Dimensions of the Thule Square Bars
- I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like # INB137.
view full answer... - Roof Rack, Kayak Carrier and Paddleboard Carrier Recommendation for 2011 Ford Edge with Naked Roof
- Do you have crossbars on your roof already that run from left to right? Or what does you roof look like now? I can see what would be best option from there.
view full answer... - Roof Rack for a 2017 Honda Civic LX Coupe
- The 2017 Honda Civic LX Coupe doesn't have a lot of fits available for it, but Inno makes a pretty solid range of fits for your vehicle.
I recommend their aero bar kit, consisting of:
Inno Aero Crossbars, 42 inches, Black, part # INXB108-2
Inno Flush Feet for Aero Crossbars, part # INXS200
Custom Fit Kit for Inno Racks, part # INK683
The shape plus the C-Channels let you use a variety of accessories and cargo solutions.
I recommend verifying the roof capacity of your vehicle
view full answer... - Roof Rack Recommendation for a 2003 Chevy Astro Van
- I wish we had a solution that I could provide for you, but all of the roof racks we offer are designed to fit 2003 Astro van's with raised roof rails. Are you sure you have a totally naked roof?
Most likely you have a roof that has raised side rails and would need the Inno Roof Rack that consists of part numbers # INB137 and # INFR.
view full answer... - Roof Rack Options for 2011 Hyundai Tucson with Panoramic Sunroof
- We offer a number of roof racks for the 2011 Hyundai Tucson with panoramic sunroof. The racks that are compatible with your exact version of the vehicle will depend on its roof style.
The link provided will take you to our fitguide page for Tucson roof racks and at the top of the page you can select the type of roof on your vehicle (either a naked roof with no sort of hardware or a roof with raised side rails). This will allow you to see compatible roof racks. Systems are available from
view full answer... - Cost Effective Way to Carry Two Kayaks on the Roof of a 2003 Toyota Avalon
- For a roof rack confirmed to fit your 2003 Toyota Avalon SLE I recommend the Inno Square Crossbar Roof Rack System which is composed of part # INB137, part # INSUT, and part # INK202. This is an excellent cost effective system for you. It has square crossbars as the title states that will accept a wide range of different rooftop carriers. The bars have a 140 lb weight capacity though you will need to check the roofs weight capacity before use.
The best way to carry two kayaks on the
view full answer... - Recommended Roof Rack Confirmed To Fit A 2014 Ford Fusion
- The SportRack Semi-Custom Roof Rack SR1010 is not a confirmed fit for your 2014 Ford Fusion, so because it isn't a fit, installation instructions will not help with your vehicle.
For a confirmed fit roof rack, I recommend the Inno Roof Rack which consists of Inno Square Crossbars # INB137, Inno Feet for Square Crossbars # INSUT and Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK860.
view full answer... - 2016 Honda Civic Coupe Roof Rack Recommendation
- A two door vehicle is considered a coupe whereas a 4 door is a sedan. Since you have a 2 door vehicle that means you have a coupe which we do have roof rack fits for.
The INNO Square Bar Roof rack part # INB137, # INSUT, and # INK683 is a confirmed fit for your vehicle and would work well.
view full answer... - Recommendation for Cost Efficient Roof Rack on 2015 Honda Civic 2-Door
- For your 2015 Honda Civic, I recommend the Inno Square Bar Roof Rack. This system will include # INB137 for the two 54 inch Square Crossbars, # INSUT for the Feet and # INK642 for the Custom Fit Kit. This is the most cost efficient roof rack that is confirmed to fit the 2-door model of your vehicle. This is a very nice, sturdy system with elastomer coating to resist corrosion and the crossbars will be compatible with most roof accessories.
I have attached a demonstration video along
view full answer... - Roof Rack For 2019 Kia Sportage With Naked Roof
- The Inno Square Crossbars - Steel - Black - 54" # INB137, Feet # INSUT, and Fit Kit # INK686 that you referenced is confirmed to fit your 2019 Kia Sportage if it has the naked roof without roof rails. I attached a link to our return policy that you can check out. If parts are missing or the products do not fit as intended, our customer service team will certainly handle the issue.
view full answer... - What Roof Rack do You Recommend for My 2018 Chevy Volt?
- I have a roof rack solution for you. Unfortunately, it looks like Rhino-Rack not only discontinued your 2500 series roof rack for your 2012 Chevy Volt, but they also do not make any roof rack models that fit a 2018 Chevy Volt.
With that being said, the only alternative is to purchase a new roof rack. For that route, I recommend the following parts for your 2018 Volt:
- Inno Square Crossbars - Steel - Black - 50" Long # INB127
- Inno Feet for Square Crossbars - Naked Roofs - Black
view full answer... - Inno Roof Rack Fit on 2019 Chevy Volt With Naked Roof For Carrying a Kayak
- Yes, there is an Inno roof rack that fits your 2019 Chevy Volt with a naked roof that will allow you to carry a kayak. The roof rack you were referring to is made up of three parts - the bars, feet, and fit kit. The correct parts for your '19 Volt are the following:
- Inno Square Crossbars # INB127
- Inno Feet for Square Crossbars # INSUT
- Custom Fit Kit # INK688
Then for the easiest loading of your kayak on the roof rack, I recommend a J-style carrier, which will allow you
view full answer... - Can Inno Mounting Feet Work with Older Thule Square Bars on 2017 Chevy Volt
- If you have the older style Thule square bars (without a channel on the underside of the bars) then they are indeed compatible with the Inno Feet # INSUT. The older Thule square bars and the Inno Square Bars # INB127 feature matching dimensions of 7/8 inch tall and 1-1/4 inches wide.
Since you already have compatible crossbars you can just get the Inno Feet # INSUT and the Custom Fit Kit # INK688 (which is what actually secures to the vehicle's roof) for your 2017 Chevy Volt.
view full answer... - Inno Square Roof Rack Part Numbers that Fit 2019 Toyota RAV4
- Inno has a square bar roof rack that fits your 2019 Toyota RAV4 with the part numbers # INB117 for the square bars and part # INXP for the feet of the rack and then for the fit kit part # IN33FR. Since you have square bars already you'd just need the feet and the fit kit.
view full answer... - Would Excessive Speed Cause Inno Roof Rack of 2016 Toyota Prius to Fly Off
- The Inno roof racks like the part numbers # INB127, # INSUT, and # INK486 are very well made and would easily handle the speeds your 2016 Toyota Prius would be going on the highway. There isn't a speed limit for this rack but we do recommend not exceeding the speed limit.
view full answer... - Recommended Roof Rack to Fit a 2011 Scion XB
- We carry a few different roof rack systems the will work on your 2011 Scion xB.
I recommend the Rhino-Rack Vortex Aero Rack System, # RRVA137B-2 Vortex Aero Bars, # RRRLKVA 2500 Series Legs, and # DK152 Fit Kit. The Vortex crossbars are a more aerodynamic bar that will cut down on wind drag and noise. The bars are constructed of lightweight aluminum and provide a low-profile and sleek design.
All the racks listed can carry up to two kayak. However, consulting your owner's manual
view full answer... - Inno Roof Rack for a 2009 Dodge Caliber SXT
- The Inno Roof Rack that will fit on your 2009 Dodge Caliber SXT, with no existing rails or crossbars, will include the 50 inch Inno Square Crossbars, part # INB127, the Inno Feet for Square Crossbars, part # INSUT, and the Custom Fit Kit, part # INK555.
The Inno Feet, part # INSU-K5 come with the locking hand knobs and includes 2 keys as well.
view full answer... - How to Fit Older Thule Square Crossbars on a 2015 Toyota Corolla Sedan Naked Roof
- Thanks for reaching out!
To utilize your older Thule square crossbars on your 2015 Toyota Corolla Sedan you'll need to use the Inno Feet # INSUT and their Fit Kit # INK306.
The new Thule square crossbars have the slots on the bottom so they mount to different legs whereas the Inno square bars have the same design and dimensions as the older Thule square crossbars which is why these feet are compatible with your Thule bars.
view full answer... - Will The Inno Feet For Square Crossbars Work With My Older Thule SquareBars On My 2019 Ford F-250?
- The Inno Feet for Square Crossbars # INSUT that you mentioned will not fit your 2019 Ford F-250, unfortunately, however I have another solution for you.
If your SquareBars are the Evo bars, then you can use the:
-Evo Clamp Feet for Thule Crossbars # TH710501, with the,
-Fit Kit for Thule Evo Clamp Roof Rack Feet # TH29TX.
These will only work with the Evo style crossbars with the bottom channel, however if you don't have the bottom channel then you have the older style of bars
view full answer... - Parts Needed to Install Older Thule Square Crossbars on 2019 Chevy Volt
- Since the Inno crossbars are the same dimensions as the older Thule crossbars like what you have you can use the Inno feet # INSUT and Inno fit kit part # INK688 to install your current Thule bars on your roof.
view full answer... - Roof Rack for Old Thule Square Crossbars on 2022 Ford Maverick
- Thank you for all of the information! Since you're wanting to use your older Thule square crossbars you will need to use the Inno legs and fit kit as Thule updated their roof rack system a few years ago and their newer legs don't work with the older square bars. The Inno square bars have the same dimensions as the older Thule bars though which is why their kits are compatible.
As of right now (January 2022) the only roof rack fit listed that fits this criteria is for the 2022 Ford Maverick.
view full answer... - Can I Use Thule SquareBars From Another Vehicle On My 2017 Volkswagen Passat?
- You will need to use an Inno product for the old bars to fit. The new feet and bar style uses a channel to mount and the old ones wrap around the bar. Luckily the Inno bars are the same size so you can use the Inno Feet # INSUT this custom fit kit # INK591 This kit is designed to fit your 2017 Volkswagen Passat!
I've included a video of the installation on a 2014 Passat. Pretty straight forward but be sure to watch the video before you attempt the install.
view full answer... - Cheapest Roof Rack For 2020 Toyota Prius
- Yep, it sure is; the least-expensive roof rack for your 2020 Toyota Prius is indeed the Inno square bar roof rack. The exact parts that fit your '20 Prius are the following:
- Inno Square Crossbars # INB127
- Inno Feet for Square Crossbars - Naked Roofs # INSUT
- Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK486
view full answer... - Best Roof Racks for a 2005 Toyota Celica
- There are a few roof rack options for your 2005 Toyota Celica.
First we have an Inno roof rack using the following parts:
Bars # INB117
Feet # INSUT
Short roof adapter # INJK
Custom fit kit # INK165
Next we have a semi-custom SportRack roof rack using the following parts:
Semi-custom rack # SR1008
Short roof adapter # SR1116
And we have a SeaSucker option that use incredibly strong vacuum cups # 298-SX6000B.
Out of these options the SportRack cost the least but isn't
view full answer... - What to do Since Replacement Pad for Thule 480 Foot on 2010 Honda Insight is Discontinued
- The Pad for your Thule Traverse Foot TH75222479002 is no longer available. Thule has discontinued the kit for your vehicle and no replacement is available for that roof rack, so you unfortunately will need to upgrade. If you want a similar system compatible with your Thule square bars, I recommend the Inno feet # INSUT and fit kit # INK727 as a custom fit for your vehicle.
I've also linked the page to other options if you want a completely new roof rack.
view full answer... - Recommended Roof Rack For 2011 Infinity G37 4 Door With Square Bars
- For your 2011 Infinity G37, there are no longer Thule options available to utilize the old square load bar as they have completely changed even their square bar style. If you have the old style Thule square load bars, then I recommend the Inno feet # INSUT and fit kit # INK872. This will give you a complete roof rack for your 2011 Infinity G37 sedan.
If you instead want to move to the newer Thule options available, I recommend the Thule WingBar Evo Crossbars - Aluminum - Black - 53"
view full answer... - Longer Roof Rack Recommendation for 2015 Nissan Rogue with Naked Roof
- For a longer crossbar roof rack confirmed to fit your 2015 Nissan Rogue we do have a great solution. You'd need to start with the # INSUT for the feet and part # INK466 for the fit kit.
Then for the longer crossbars we have the # INB165 which are 65 inch long crossbars that will fit. You do want to be careful no too go too long with the crossbars as can be an issue pulling into garages etc. Typically the guideline is to not exceed the width of the mirror housings.
view full answer... - Can Older Style Thule Square Bars Fit 2007 Volkswagen Rabbit
- Thule did change their square crossbars in the way you mentioned by adding a channel to the bottom of the bars so that they attach to the feet via that instead of by wrapping around them with the foot. So while I have a solution for you...what that means is that you wouldn't be able to use your current bars with the newer foot design.
What you can do is use the Inno feet part # INSUT with the fit kit part # INK852 which is a fit for your 2007 Volkswagen Rabbit since the Inno square bars
view full answer...
Inno Accessories
Fit to this rack on your 2007 Nissan Murano
Info for these parts were:
Written by:
Tyler C
Updated by:
Lisa S
Updated by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.