Detail K2 Snowplow for 2" Hitches - 84" Wide x 22" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8422,C31086
Retail:$2,319.95
Our Price: $2,071.90
You Save: $248.05
This item qualifies for Free Truck Freight Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meDetail K2 Snowplow for 2" Hitches - 84" Wide x 22" Tall
part number: K2AVAL8422
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric winch raises and lowers plow with sturdy, nylon strap
- 2.4 GHz Wireless remote control allows you to operate the plow from the comfort of your vehicle
- In-cab switch serves as a reliable backup to the remote control
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 84" wide x 22" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Winch lift capacity: 3,000 lbs
- Weight: 283 lbs
- 1-Year limited warranty
The Detail K2 snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled electric winch. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
The plow comes with a wireless remote that allows you to stay warm and out of the elements while still effectively controlling the plow. The remote operates on a 2.4 GHz frequency, allowing it to quickly send signals to the winch without experiencing delays. And because it's wireless, you won't have to run wires through your dash. Nor will you have to leave your window cracked open in the middle of a snow storm just so that you can run a wired remote into your cab. You will be glad to have it on those cold winter days.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using the wireless remote control. If you prefer, you can also install the included in-cab toggle switch to control the plow. The winch uses a durable strap, which is much quieter than a chain, to raise and lower the plow.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8422 Detail K2 Hitch Mount Snow Plow - 84" Wide x 22" Tall Blade
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31086
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in the USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 350 lbs
- Gross trailer weight: 3,500 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter:5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31086 Curt Front-Mount Trailer Hitch Receiver
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Detail K2 Snowplow for 2" Hitches - 84" Wide x 22" Tall - K2AVAL8422
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31086
Average Customer Rating: 4.8 out of 5 stars (62 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Glen 12/10/2021
2003 Chevrolet Silverado 1500
Decent plow for the price.
I installed this DK2 Avalanche on a 2003 GMC Yukon 1500 with a Curt front receiver hitch 31302. If you have a side mount battery, you may need battery bolt extenders (Battery Doctor #30400) to make life easier. That said, the ring terminal connectors on the winch control box will be too small. Get ones that will fit the 3/8 inch stud and 12-10 AWG wire to replace the stock ones.
Manufacturer instructions are not very helpful, but Graz's Garage has a great install video on YouTube. He installed his on a 2020 Chevy Colorado Z71. You can always count on a gearhead from Detroit. eTrailer is awesome at responding to concerns, too, and I'm glad I bought this product from them.
by: Dan10/04/2023
Jeep Wrangler
Fits perfect and works just as I needed it to. I use it for my SnowSport plow set-up on a 2022 Gladiator Sport Max Tow. I’ve been using front receivers for this same plow for the last 24 years. It’s been used on 5 different trucks and this front receiver mount plow is the BEST.
*** When installing on a Gladiator(possibly the Wrangler as well), the front plastic trim below the bumper needs to be cut for receiver clearance. I wanted a tight and “factory looking” install, so I took my time with a vibrating cutter and very sharp utility knife. After trying to put it back in place, the hole is not just square, it’s shaped more like. “T”. I suggest you make small adjustments/cuts as you go forward. It may take several times fitting and cutting to get it right and tight, but in the end it does look like it came that way from JEEP. On the Max Tow package, there is also a metal skid plate that does not get reinstalled. Unfortunately that piece is where the back of the plastic fascia mounts. I ended up securing it with some long heavy-duty zip-ties and it’s worked well for a year now. Just an FYI for those installing the same receiver on their same vehicle.
by: Warren 04/18/2024
Product shipped and received on time. I'm very happy with the packaging. Hardware was included with instructions to install the hitches I purchased.
by: Steve Miller01/13/2021
My plow was delivered quickly. It took a bit longer to assemble than I thought it would, but it seems pretty heavy duty and looks and works great for my 600' long driveway. It's much better and quicker than plowing with my 4 wheeler and warmer too.
by: Donald02/02/2021
Installed real easy. Cuttingbthe plastic rock guard was the hardest part.
by: Terri12/21/2023
It's a great plow.works good the winch is a little slow and the remote is slow to respond but all in all it does what I need it to do.
by: KP-CL06/20/2021
2021 Jeep Gladiator
Opened the box and instructions were bad, OK you added the video the video when is OK. The parts seen of matching OK (not 100% verifying the list of parts and qualities). Shipping way odd and for a e-shipping no thing over a week, then boom you are shipping and here (odd). It is raining now - - so no installing a hitch in the driveway today...
Kp-cl
6/21/2022
The hitch worked OK, even if the instructions were not so good. My hitch for the home snow plow worked OK for the winter.
Jenny N.
6/24/2022
I recommend taking a look at the video ins tall that we have on a 2008 Jeep JL wrange to get an idea if how it installs.
by: Will 11/12/2022
Plow seems to be of good quality, wont know till I actually use it, how good it is. Seems sturdy enough to do the job, assembly was very straight forward.
My only complaint is etrailer left me dangling for a month with no updates on my order status, even after chatting with one of their customer service people.
I ended up contacting DK2 to get a ship date.
by: Charles08/16/2020
All was great. Good quality product. Install instructions for cutting the front pan were incorrect. The hitch design appears to have changed from the instructions provided. A much different cut-out was required making many installs and removals. The 3 X 5" cut-out in the instructions is incorrect.
Charles S.
8/17/2021
Great, but installation was a bit more challenging then identified
by: Larry 02/28/2020
Excellent. The receiver is of great quality and fitment was perfect. The installation video was a very nice resource allowing installation preparation and because of this I completed the receiver install in a little less than 30 minutes. This is the third Curt receiver I have purchased from etrailer and each time I have had the same exceptional experience with the product and etrailer.
by: Carl 09/21/2023
Jeep
It will be so nice to have the Jeep with us. But it didn’t take the 90 minutes but most of the day to put it on
by: Michael 12/22/2022
2023 Jeep Wrangler
Very easy install. Videos were great help. I like the idea of fish springs, I didn't need them, but tried it out, works great. Quality unit, made in USA.
Shipping very quick, follow up emails. Great outfit to deal with. I'll be contacting soon about purchasing a snowplow with them.
by: Peter 10/25/2021
Easy install. I have my winch attached to it and it works great. Much cheaper than getting a new bumper with integral winch.
by: Thomas 11/02/2019
1995 Ford F-250 and F-350
Haven't had to use it yet but arrived when expected and easy to assemble and looks very easy to use. Would definitely recommend buying from etrailer.com
by: Donald 07/06/2023
Not hard to install at all, the hard part was getting the plastic clamps back into the air dam. LOL
by: David05/08/2019
2018JeepJL Wrangler Unlimited
This was one of the easiest installs / modifications ever. The install was pretty loose and forgiving when put into place but it tightened up nicely. I was a little worried about cutting the front fascia after seeing a couple of reviews where others has omitted it, but that too was actually really easy to do with a sharp razor knife. Everything was completed in just 45 minutes during my lunch hour in the parking lot at work!
by: Michael 08/14/2023
Quick delivery. Perfect fit. Easy install. Thanks.
by: Michael 04/14/2021
i received exactly what i ordered and actually a day earlier than expected. This was my first order with etrailer and will 100% order from them again.
Thank you for your excellent service!
by: Phillip 06/03/2020
A little fiddly to install for one person, when I added a helper everything went smoothly.
Also, if you're going to put the lower plastic tray back on the car, you'll find that the tray will need to be test fitted a few times to get the fitment of the push rivets correct. The slot you'll end up cutting isn't going to be a rectangle but more of a "T" slot. This is to account for the stiffing flange of the hitch.
Overall, a very stout and well built product.
by: Salty Girl06/28/2021
Excellent purchase, easy to install and great quality. We added an extension bracket and a 6-rod rack + cooler bumper mount - it's a game changer!
by: 03/05/2021
Easy to install, built well. You will have to cut the plastic shield under the Jeep.
by: Paul02/20/2019
2000 Ford Ranger
Shipped in a short amount of time, call company and received help and a phone call back as promised, great job.
by: Paul 02/04/2020
easy to do business with.
the videos that pertain exactly to my vehicle make installation a synch
super company!
25
62
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Comparing the Detail K2 Avalanche and Detail K2 Rampage II Snowplows for a Dodge Dakota
- For a 2000-2004 Dodge Dakota 4x4, I recommend the Detail K2 Avalanche Snowplow part # K2AVAL8422 with the Curt Front Mount Trailer Hitch Receiver part # 31080 over the Detail K2 Rampage II Snowplow with the Custom Mounting Brackets for Detail K2 Snowplows part # K284134 for two reasons.
The first reason is that the Detail K2 Avalanche has a has a much higher winch capacity of 3,000 lbs than the Detail K2 Rampage II which is only rated at 1,500 lbs. The higher rated the winch, the longer
view full answer... - How Tight Should Blade Stiffeners Be on Detail K2 Snowplow for 2" Hitches
- I spoke to Detail K2 about the blade stiffeners on the Detail K2 Snowplow for 2" Hitches part # K2AVAL8422 and they informed me that they don't need to have a lot of pressure applied, they should simply be snugged up and then turned an additional rotation or so for support.
view full answer... - Will Detail K2 Snowplow for 2 Hitches Fit Lifted Truck
- All of the snowplows from Detail K2, including the part #K2AVAL8422 you are looking at, require that the height of the front hitch mount receiver be 13" - 18" from the ground to the bottom of the receiver opening. As long as the front hitch on your K1500 meets that criteria you're good to go!
view full answer... - Recommended Snowplow and Front-Mounted Hitch for 1994 Ford Ranger
- For your 1994 Ford Ranger I recommend the Detail K2 Avalanche Snowplow # K2AVAL8422 which fits in the Curt Front-Mounted Hitch # C31063 (please keep in mind this hitch will not fit Ranger's with a front cross-member or 2WD models built in Canada).
The K2 Avalanche # K2AVAL8422 has a blade which can adjust to be angled to the left or right as well as straight ahead and gets raised or lowered with an electric winch that is operated via remote control so you do not have to leave the cab
view full answer... - Correct Front Mounted Receiver for 2005 Chevy Silverado
- The # K2AVAL8422 K2 plow attaches to the vehicle using a standard front mounted hitch.
The hitch you need will depend on whether your Silverado is a 1500 or a 1500 HD model. The easy way to differentiate between the two is the hubs. The 1500 has 6 bolt hubs while the 1500HD has 8 bolt hubs.
If you have the 1500 model, I'd recommend the Curt # 31302. If you have the 1500HD model, use the Curt
# 31108.
I've linked to installation videos for both hitches mentioned above.
view full answer... - What is the Receiver Height Requirement for a Detail K2 Snow Plow
- I spoke with my contact at Detail K2 who said that the height of the front hitch receiver on your 2005 Jeep Wrangler needs to be within the range of 13" - 18" which is measured to the bottom of the receiver opening. This is the case for all of their plows, including the Avalanche # K2AVAL8422 that you referenced.
view full answer... - Does Blade Stiffener Have to be Connected for Safe Usage of Detail K2 Hitch Mount Snowplow
- Good question! The blade stiffeners that come with the Detail K2 Snowplow # K2AVAL8422 don't necessarily have to be used. I reached out to my contact at Detail K2 who said that the only time that those stiffeners really need to be used is if you will be pushing a lot of heavy snow. Otherwise you'll be just fine using it on your 2003 GMC Yukon XL without those connected.
The reason why you're having trouble is because those will connect if the receiver is the same height as the crosstube,
view full answer... - How to Add Lights to a Detail K2 Snowplow for 2" Hitches
- In order to add lights to the Detail K2 Snowplow for 2" Hitches part # K2AVAL8422 you'll need a light kit like the Halogen High/Low Beam Light Kit with Turn Signals for Detail K2 Snowplows part # K281488LB2. The light kit comes with lights, brackets, and pigtails. The pigtails will be tied into the factory headlights but you'll indeed need to add relays so you don't overdraw the factory headlight circuits.
Unfortunately, we don't have a plug-in relay harness for this so you'll need
view full answer... - Recommended Light Kit for K2 Detail Snow Plow
- K2 recommends that their # K281488LB2 Halogen High/Low Beam Light Kit with Turn Signals be used with their # K2AVAL8422 Avalanche snowplow. The kit includes the wiring harness, brackets and all necessary installation hardware.
I've linked to a product demonstration video featuring the light kit.
view full answer... - Can K2 Detail Avalanche K2AVAL8422 Be Swapped Between 2002 Toyota Tundra and Ford F-350
- The # K2AVAL8422 plow itself isn't vehicle specific, you can install it on any SUV or light truck that has a front hitch available for it.
To install the # K2AVAL8422 on your 2002 Toyota Tundra, you'll need a front mount hitch like # 31180. You will be able to used the plow on both trucks, but unless you want to move all the wiring each time, you'll need an additional winch control box # K2WCB and wireless remote # EWX004-CAD for the second vehicle.
If you'd care to reply with the
view full answer... - Differences Between Detail K2 and Detail K2 Elite Snow Plows For a 2003 Toyota Tacoma
- Yes, the difference between the Detail K2 Snowplow # K2AVAL8422 and Detail K2 Elite Snowplow # K2AVAL8422ELT is the Elite has the electric actuator over the winch. The Elite also uses a chain connection to the blade while the basic K2 has a strap that is more likely to become damaged. The electric actuator is superior to the winch. It operates faster, smoother and it has a built in clutch that will protect against damage that a winch would cause. The actuator won't be able to lift the blade
view full answer... - Detail K2 Snowplow for 2" Hitches K2AVAL8422. Will This Work On A Lifted Truck?
- In order to use the Detail K2 Snowplow # K2AVAL8422, your front hitch must be between 13"-18" from the ground, when measured from the bottom of the receiver opening to the ground.
We installed the Curt front hitch # C31018 on a 2012 F250 where everything was stock, and the front hitch was at about 15-1/2". So with a 6" lift and big tires, this snow plow would likely not be effective. You can always measure your hitch to be sure, but your lifted truck will likely not be able to be used
view full answer... - Snow Plow and Mount Recommendation for 1994 Jeep Wrangler 4WD
- I'd recommend going with a plow mount for your vehicle over a hitch style mount. On some hitch mount setups we've seen the hitch not be as durable as the mounts that mount to the frame and are specifically for plows so that's what I feel is the better solution.
The Detail K2 Storm Plow part # K2AVAL8422 that you referenced is a great choice, and then for mounts custom fit to your 1994 Jeep Wrangler we have the part # K284115 which would work great.
view full answer... - Can I Use the DK2 Snow Plow # K2AVAL8422 with a 9-Inch Ground Clearance on My 2016 Toyota Tacoma?
- I reached out to my contact at DK2, and he confirmed that you will have enough room to install and operate the Detail K2 Snowplow for 2" Hitches # K2AVAL8422 on your 2016 Toyota Tacoma with a 9-inch ground clearance. As far as the assembly, the snow plow does require assembly upon arrival.
view full answer... - Front Hitch Confirmed to Fit a 2022 Jeep Wrangler Unlimited
- We do. The Curt Front Mount Trailer Hitch Receiver # C31086 is a confirmed fit for the 2022 Jeep Wrangler Unlimited. This hitch is made in the USA and has a bolt-on, no-drill installation.
view full answer... - Front Mounted Hitch Receiver for 2020 Jeep Gladiator
- The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31086 is a confirmed fit for a 2020-2021 Jeep Gladiator. I just confirmed the fit with the manufacturer it will install in the same way as shown in our video of the Wrangler I've attached.
view full answer... - Front Hitch Recommendation for 2020 Jeep Wrangler for Use with Snow Plow
- Curt is the front hitch manufacturer that our snow plow manufacturers recommend with their kits so for your 2020 Jeep Wrangler you'd want the Curt # C31086 and you'd be set. This would work great with a hitch mounted plow setup like the # SB324-080.
view full answer... - Can I Install a Front Hitch on a 2024 Jeep Wrangler 4xe?
- Yes, you can so long as your 2024 Jeep Wrangler 4xe is not a Rubicon. The Curt Front Hitch item # C31086 is custom fit and bolts to your Jeep with included hardware. It has a 2" receiver that gives you a 3,500 lbs towing capacity and a 350 lbs vertical load limit/tongue weight.
view full answer... - Is there a Front Mount Hitch for a 2024 Ford E-450?
- No, Erich I am really sorry but we do not. I checked with our vendors and Curt, Torklift, and Draw-Tite do not have anything available either. Additionally, I went back a few years and saw that we have never had a custom fit from mount hitch available for the E-450s.
The only solution I have to offer for you is to use either the Weld-On Receiver item # E17 or the Combo Bar 12" item # E-11 and speak to a local fabricator in your area about having a front hitch custom build for your vehicle.
view full answer... - 2021 Jeep Gladiator Front Trailer Hitch Receiver Compatibility With Blackhorse Bull Bar
- I am and almost 100% certain that you will not be able to use the Curt Front Mount Trailer Hitch Receiver # C31086 with your Blackhorese bull bar. We do not now or have previously ever carried the Blackhorse products to be able to test fit them with the Curt receiver.
From what I can tell by the images of the Blackhorse it will block the use of the Curt receiver. And I may be mistaken but you appear to have a Rubicon or Mojave Trim from your picture which the Curt receiver is not going
view full answer... - Wiring SnowBear Personal Snowplow on 2018 Jeep JL Wrangler
- Your existing SnowBear Personal Snowplow # SB324-081 is also confirmed to fit your new 2018 Jeep JL Wrangler and it will work great. The wiring to the vehicle battery will be the same as it was on your 2013 model Wrangler. I have attached the manufacturer's winch wiring diagram that you can also use for reference.
The Curt Front Mount Hitch # C31086 that you had installed on your 2013 Jeep Wrangler will also mount to your 2018 JL Wrangler. For a new set of hardware you can use the Replacement
view full answer... - Does Curt Front Hitch # C31086 Fit 2018 Jeep Wrangler JL Rubicon with Winch
- Curt has confirmed for us that the front hitch part # C31086 that you referenced fits all models of the 2018 Jeep JL Wrangler including the Rubicon that has the factory winch.
view full answer... - Does Curt Front Hitch C31086 Fit 2021 Jeep Wrangler Rubicon
- You can install the Curt front hitch # C31086 on your 2021 Jeep Wrangler Rubicon but you will have to modify the heat shield like you mentioned. The Draw Tite part # 65079 is also a fit and requires less modification though so it would be what I would recommend.
view full answer... - Can A Front Mount Hitch Be Installed On A 2021 Jeep Wrangler Unlimited With A Blue Ox Base Plate?
- Depending on what you were planning on using the front hitch for, I may have an alternate solution available, but as the Curt Front Mount Hitch # C31086 will install in the same place and sit in the same place as the Blue Ox Base Plate # BX1139 on your 2021 Jeep Wrangler Unlimited, you will not be able to have both attached at the same time, unfortunately. I was hoping I could find a work around for you, but both options will be competing for the exact same space. I checked with the Draw-Tite
view full answer... - Recommended Front Mount Hitch for a 2023 Jeep Gladiator
- To add a front hitch to your 2023 Jeep Gladiator, I recommend the Curt Front Mount Trailer Hitch item # C31086. This hitch is custom fit and bolts to your Jeep with included hardware.
Please note that this hitch will not fit the Rubicon and Mojave sub-models.
This front hitch has a 350 lbs capacity for mounting accessories and a 3,500 lbs gross trailer weight. The 2" x 2" receiver sticks out just below your license plate and does not affect your ground clearance.
I have linked
view full answer... - Does the Curt C31086 Front Hitch Fit a 2023 Jeep Wrangler Rubicon?
- No, it does not but I have one that does. For your 2023 Jeep Wrangler Rubicon you will want the Draw-Tite Front Mount Trailer Hitch item # 65079. This front hitch is custom fit and bolts to your Jeep with included hardware.
The Draw-Tite Front Mount Trailer Hitch item # 65079 is confirmed to fit all models of the 2023 Wrangler including the Rubicon. It has a 2" receiver which boasts a vertical load limit of 500 lbs and a maximum towing capacity of 5,000 lbs.
I have linked an installation
view full answer... - Front Mount Hitch Needed for a 2018 Jeep JL Wrangler Unlimited
- We have both the Curt # C31086 and the Draw-Tite # 65079 which are confirmed to fit a 2018 Jeep JL Wrangler as long as it has the standard factory bumper. I am unsure what comes on the Sahara but if you have the standard bumper you are good to go!
The Curt has a line pull rating of 9,000 lbs and a vertical load rating of 350 lbs. The Draw-Tite option has the same line pull rating but the vertical load rating is 500 lbs instead.
Installation details are linked for both front mount
view full answer... - Front Hitch Custom Fit on 2018 Jeep Wrangler Unlimited JL Rubicon
- I reached out to my tech contact at Curt and he said the Curt Front Mount Trailer Hitch Receiver # C31086 has been test fit on your specific Rubicon model and it is a confirmed fit. You will need to remove the steel skid shield permanently for this installation.
view full answer... - Do You Have a Front Mount Hitch for a 2024 Jeep Wrangler?
- Yes, we do so long as your 2024 Jeep Wrangler is not the Rubicon model. It is the Draw-Tite Front Hitch item # 65079. This hitch is custom fit and bolts to your Jeep with included hardware. It has a 2" receiver with a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight.
I have linked an installation video below so you can see how to get this hitch set up.
view full answer... - Will the Curt Front Hitch C31086 Fit a 2024 Jeep Wrangler 4xe?
- Yes, it will! The Curt Front Hitch item # C31086 has been confirmed to fit the 2024 Jeep Wrangler 4xe. This front mounted hitch attaches to your Jeep with included hardware and does not require drilling. It has a 2" receiver, with a 500 lbs maximum tongue weight, and a 5,000 lbs towing capacity.
I have linked an installation video below to help you get it set up.
view full answer... - Recommended Front Mount Hitch for a 2023 Jeep Wrangler 4xe
- Yes, it does so long as you don't have a Rubicon. The Curt Front Mount Trailer Hitch item # C31086 is confirmed to fit the 2023 Jeep Wrangler 4xe. This front mounted hitch is custom fit and bolts to your Jeep with included hardware.
I have linked an installation video below that will show you how to get it set up.
view full answer... - Front Hitch and Wiring Kit for Winch for 2021 Jeep Wrangler Unlimited
- The Curt hitch part # C31086 is probably the most unobtrusive front hitch that fits your 2021 Jeep Wrangler Unlimited.
For a 4 foot wiring kit the part # BDW20305 would work great too.
view full answer... - Recommended Front Receiver for a 2024 Jeep Wrangler
- Yes there is - check out the Curt Front Mount Trailer Hitch Receiver # C31086. This hitch is custom to fit your Wrangler, has a max vertical load limit of 350 lbs and a max line pull limit of 9,000 lbs.
view full answer... - Does this Front Mount Hitch Fit a 2020 Jeep Gladiator?
- Yes, it does. The Curt Front Mount Hitch item # C31086 is confirmed to fit the 2020 Jeep Gladiator. It fits all models except for the Mojave and Rubicon.
view full answer...
Info for these parts were:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Ronnie R
Test Fit:
Shane H
Video by:
Jacob H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeep JL Wrangler Unlimited Accessories
Product Experts Available Now!
Call 1-800-940-8924
Donald C.
2/3/2022
Wonderful