Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers
Part Numbers: RED24FR,331-TPH-010
Retail:$219.94
Our Price: $182.50
You Save: $37.44
This item qualifies for Free Shipping
In Stock
Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
part number: RED24FR
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight behind the dash. Control your braking power with the turn of a dial, with manual override right at your fingertips.
Features:
- Brake controller activates trailer brakes in proportion to your vehicle's braking
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- Dash-mounted knob keeps your vehicle interior looking sleek while giving you easy access to the brake controller
- Lets you adjust braking power with the turn of a dial
- Gives you a manual override at your fingertips
- Offers simple diagnostics with colored LED alerts
- Main unit mounts out of sight behind the dash in any position, direction, and angle
- No more banging your knee on a bulky controller
- No interference with airbags or other vehicle accessories
- Universal wiring harness (RED69FR - sold separately) or vehicle-specific adapter (sold separately) required for installation
- Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety
- Made in Australia
Specs:
- Application: trailers with up to 2 axles (4 brake assemblies)
- Compatible with electric or electric-over-hydraulic trailer brakes
- Main unit dimensions: 4" long x 3-3/8" wide x 1-1/8" tall
- Control knob dimensions: 1-7/8" long x 9/16" wide x 3/4" tall
- Length without dial: 1-1/4"
- Output voltage range: 9V - 16V
- Output current rating: 18 amps continuous
- Maximum charging voltage: 12V DC
- 2-Year warranty
Tow-Pro Liberty Operation
The dash-mounted knob puts control of your trailer's brakes at your fingertips. In addition to offering fast, simple power adjustment and an easily accessible manual override, it has colored LED signals that let you know what the brake controller is doing at a glance.
When you are calibrating the brake controller for the first time, the LED lights will signal your progress. To finish setting up the device, you will need to drive your vehicle in a low-traffic area and brake 20 times or so to let the unit learn its orientation and the direction of travel. If your trailer is connected, the LED light will flash green/blue as it processes the information. If there is no trailer connected, the unit will still calibrate, just without the knob lighting up. The knob will stay blue longer as the calibration process gets closer to being done. When the display turns solid blue, initial calibration is complete. The unit will remain calibrated for the next time that you tow. If recalibration is required, it will happen automatically and without LED indication.
Once the brake controller is activated, you can use the knob to set the maximum amount of power that will be applied to your trailer's brakes. Typically, this power is only readjusted when you experience changing road conditions or if you switch over from a heavy, loaded trailer to a much lighter, empty trailer, or vice versa. To get more power to your brakes, rotate the knob clockwise toward 10. To decrease the power output, rotate it counterclockwise toward 0.
When you apply the tow vehicle's brakes, the knob will change from blue to red to signal that the trailer brakes are being activated. The higher the braking power output, the deeper the red that you will see.
The Tow-Pro Liberty keeps the manual override within easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just press the control knob. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Simple, Out-of-the-Way Installation
Unlike most proportional controllers on the market, the Tow-Pro Liberty has almost no mounting restrictions. It comes in 2 pieces - the main unit and the control knob. Because the only part that you need to be able to access is the control knob, the main unit can be mounted out of sight and out of the way. You don't have to worry about dinging your knee on a bulky brake controller or interfering with your vehicle's lower airbags.
The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and access. This can be a blank switch panel, an open spot on your center console, or wherever there's space on your dashboard. You can pick up a universal mounting panel (331-TPSI-001 - sold separately) for a clean, from-the-factory look. Custom-fit panels are available for certain vehicles as well. Before you do any drilling, be sure there's room behind the dash for the entire knob to install, including the part you don't see!
Once you've decided where you want to put the control knob, you'll need to find a good place to install the main unit. Your only restriction is the 3' plug-in cable that has to be able to reach between both the main unit and the control knob. Securely mount the box using screws, double-sided tape, or zip-ties (not included). A mounting kit (RE67FR - sold separately) is also available for the Tow-Pro Liberty. Do not zip-tie the box to wiring or cables that can shift as you drive.
A vehicle-specific wiring harness is available for most newer trucks and SUVs. One end of the custom adapter plugs into your vehicle, and the other end either plugs directly into the controller or will splice to the wiring harness - no need to hardwire to your vehicle. If a custom brake control wiring adapter is not available for your vehicle, you will need a universal wiring harness (RED69FR - sold separately). A 30-amp circuit breaker kit (331-CBK30-EB - sold separately) may also be required for installation.
For assistance in properly wiring the Tow-Pro Liberty, please refer to the diagrams below:
Installation Accessories
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
Proportional Braking
The Redarc Tow-Pro Liberty Brake Controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Tow-Pro Liberty uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
EBRH-ACCNA Redarc Tow-Pro Liberty Trailer Brake Controller - Dash Mounted Knob - Hidden - Proportional Brake Controller
Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers
part number: 331-TPH-010
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your Redarc Tow-Pro Classic (331-EBRHV2), Elite (331-EBRH-ACCV2), or Liberty (RED24FR) electric brake controller
- Custom connector end plugs into the port beneath your vehicle's dash
- Other end plugs into your Tow-Pro electric brake controller
- Some wire splicing required for Tow-Pro Classic (331-EBRHV2)
- 2-Year warranty
TPH-010 Redarc Wiring Harness for Tow Pro Electric Brake Controllers - Plug and Play
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional - RED24FR
Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers - 331-TPH-010
Average Customer Rating: 4.8 out of 5 stars (1765 Customer Reviews)
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight behind the dash. Control your braking power with the turn of a dial, with manual override right at your fingertips. Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.by: Charles04/24/2023
The hardest part was getting the zip ties tightened around the module without completely removing the trim under the steering wheel. I chose near the shifter for my location so it’s easy to reach but still out of the way.
by: Gary02/27/2023
Works great! No more readjusting between hi way and Campground driving. Looks great. Straight forward instruction for installation.
by: Reuben07/24/2022
This thing is so much better than the old controller I used to use. I like that it lets the break off after you stop moving even if you have your foot on the petal. Smooth breaking response all together. Plus, I was able to install the knob in an unused switch blank in my 2020 Pilot. You do have to be a little crafty to get it to fit there but it is possible.
by: Bobby Q07/25/2022
I was surprised how nice this brake controller is - clean install with the unit up under the dash. I installed the knob in one of the 'blanks' in the dash for a really clean look. No banging knees on older-style controllers under the dash. Thanks!
by: Jerry04/10/2024
Being new to towing a larger trailer requires research. After doing a lot of it, both through user reviews and manufacturer websites, we landed on the Rearc Liberty Brake Controller for our Tacoma. We have just over 1000 miles towing with this unit. It has performed extremely well. Towing for us includes city, highway, mountains, and even off-road to access our mountain home. Installation was straight forward and the ability to install the controller in virtually any position is an added bonus. I was able to install the dash knob in a blank panel giving the Tacoma a factory appearance, and controller located under drivers seat. I installed this unit on a non tow package Tacoma, so wiring was a bit intimidating at first. But using etrailer’s web site as a reference had everything operational in a couple afternoons. Great product so far and we look for years of use. Highly recommend.
by: Brad02/25/2024
Installed this in my 4runner that I use to haul several thousand pounds of metal boxes on an aluminum heavy variant tilt deck trailer. Install was fast and easy, the main unit is small and is easily tucked up under the dash. I drilled one small hole and placed the small lighted selector (small blue light) on the key side of the steering wheel area (see pics) and looks like it came factory from the truck. Its sasy to adjust and robust enough that it wont move settings on its own, even in rough off road conditions that a 2WD vehicle cant go. Ive had other controllers in the past but am super happy that I had lucked out and found this proportional one from Redrac with the dash knob.
by: Mike05/06/2023
The controller looks and works great. The colors are very easy to see what the controller is doing. No led colors are displayed when there is not a trailer plug in, so it almost disappears on the dash.
Reason I only gave 4 stars out of 5, like others said, the universal harness should have come with it like it does with the Elite. My truck is older so I needed the universal harness. You should only have to buy one if it is a direct plug and play for newer trucks.
by: Dean W04/20/2023
Very clean option for a proportional trailer brake controller. Nothing to knock your knees on and easy to access for extra braking as I mounted it in the dash of my E350.
by: Thomas08/05/2023
2018 Kia Sorento
This review includes the following items: Item #RED69FR - Wiring Harness, 30A Breaker kit and Item # ETBC7 Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat and Item #RED24FR Controller. I wanted to be sure I had everything. A local place Custom Coach on Pulaski Hwy, Baltimore did a fantastic job on the install, Sorry I can't remember the techs name. I have a 2018 Kia Sorento SX V6, AWD with 4 pin Tow Pkg. car rated for 5k/500# load. Trailer is a 2022 Palomino Real Lite RL-186. I've logged 2 trips so far 1 to NYS mostly highway and to Cass, West Virginia area. The controller adapted quickly, I went to a '5' to a '4' setting even in the mountains it was smooth no jerking. The one picture shows installation ubder the dash totally out of the way. It works great!
by: James02/15/2023
Install was quick and easy. The only thing that gave me grief was that darn "Trailer Brake Warning Fault" message that kept displaying on my message information display on dash. After troubleshooting for several days and calling etrailer for assistance with no solution, I tried calling Redarc with the included state-side tech support. The number puts you in touch with an Ausie down under so you have to adjust your call with thier time zone. Turns out, and VERY IMPORTANT,if you are replacing an OEM Trailer Brake Controller already installed in truck. The TBC Controller Brake Module has to be deactivated to make the fault go away. Truck still think it has a TBC and is looking for it. I used Forscan software to deactivated it through the OBDII port.
I love the features of the RedArc Tow Pro Liberty and its ease of use..
by: John03/27/2023
Toyota 4Runner
Installation went just like the video. I needed a break controller on my 4Runner, but didn't like the look or placement of a "stranded" break controller. Redarc Tow-Pro fit and look, or lack of look that I was Looking for. On my 4Runner I did move the factory switch placements around so the searing wheel didn't block my view of the break controler.
by: Sandra04/10/2023
2018 Toyota Highlander
Relatively easy install. I think it would be good if you would update the kit to include a 1 amp diode and instructions to install it. This is to prevent backfeed of electric current from brake controller which causes error issues on the 2018 Toyota Highlander.
by: HotToddy03/18/2023
2023 Hyundai Palisade
I haven't had the opportunity to install this brake controller yet, but so far I like what I see. Especially the small profile of the controller and the dash knob. I bought this to tow a 17' Casita travel trailer. I am just waiting on the 7-pin tow harness from Hyundai before I can put it all together. The instructions indicate that all of the connections are plug and play, so I anticipate a pretty straightforward install.
by: C White05/02/2023
Great product, shipped fast and I could not be happier with the "from the factory" appearance of the installation. I painted the embossed letters in the switch mounting plate so it would match the other switches. The brake controller works well and it really looks great.
by: James 05/18/2024
After much research I opted for this Redarc brake controller, the ability to tuck away the main box for cleaner appearance and incorporate the contoller switch to a factory lnstall look. The longest process of install was simply deciding where best to mount box and control switch to personal liking.
After a couple short trips to allow the unit to calibrate per our trailer, we were on the road for the season of camping. A year later and hooking up for a first outing, we notice the unit does a quick recalibration, wasn’t expected, so for this reason only I give four star. Aside from that it works beautifully and responsively to braking controls to our RV unit.
by: Dick03/08/2023
2004 Dodge Ram Pickup
Works great and is out of the way. Just find a place under the dash that is secure and bolt or plastic wire tie it in. I had to buy the universal wiring harness also so I could wire it to my 7 pole. You would think it would come with one but I’m guessing there are many types of wiring for each vehicle manufacturer.
by: Gary04/12/2023
Toyota Highlander
Simple to install. Worked smoothly and is as aggressive as you need. No more knee banger. Unit installed easily out of sight. Control is easy to access on the dash. The Adapter for the blank switch cover is a must for a clean installation on the Toyota Highlander.
by: Francis 05/14/2024
Ford Explorer
We just completed a 1200 mile journey with the Redarc Tow-Pro Liberty Brake controller in a 23 Explorer pulling a 5000 lb Travel Trailer. No Interstate roads on this trip, from Florida to northern Ohio through the mountains of Tennessee and Kentucky on secondary roads. The Redarc performed flawlessly.
by: Tom03/07/2023
I love this brake controller. I put it in my brand new 2023 Silverado 1500. It looks factory the way I installed it. No big bulky controller hanging under the dash. Would highly recommend.
by: JDen03/21/2024
I installed this over a year ago in my Honda Pilot. The video was the perfect help. It worked like a charm and like so clean and professional. I could not be happier.
by: Robert03/20/2024
Install took about an hour and a half. I have big hands that didn't play well with the room under the dash. The controller didn't go into setup mode until I hooked up the trailer and drove around. Other than that so far so good.
by: John M.06/03/2023
etrailer is an excellent e-commerce store that has great products and fantastic employees that are always willing to help. The photos and videos are super helpful.
by: Kenneth07/18/2021
Expedited shipping was super fast with no problems. I installed the unit myself and it was fairly simple. I recommend getting the exact fitting wire harness (huge time saver) and I’d recommend getting and exact fit knock out to install the dial in. (Another big time saver). I drilled a hole in my own blank or knock out thingy and I’m pleased with it but it took a little time. I’ve got a 2010 Honda Pilot. Funny thing, after rushing to install the brake controller, our trailer had to go in for repairs before we even completed the transaction. It will be another month before I actually use the brake controller.
by: William Scott04/14/2024
Easy to install and works perfectly. I tow a 4200 lbs travel trailer with a Ford Explorer. On my longest trip from Northern New York to The Southern tip of Florida and back, the brake controller gave us flawless performance. During the January to May trip, I encountered various weather and terrain. I purchased a second one for my daughter who owns a similar rig.
by: Pierre04/02/2024
Honda Pilot
The website is easy to navigate and the information provided extremely useful to make an educated choice. The product fits my Honda pilot nicely.
The client service is over the top, I appreciated the immediate call back to check and confirm my order.
25
1713
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- Will the Redarc Tow-Pro Liberty Brake Controller Work With a Hydrastar Actuator
- Yes, the Redarc Tow-Pro Liberty Brake Controller part # RED24FR is compatible with electric over hydraulic surge brake actuators such as the ones from Hydrastar. It works with all Hydrastar actuators.
view full answer... - Redarc Brake Controller Harness For 2013 Toyota Tacoma
- With use for the 2013 Toyota Tacoma with tow package, it is recommended to use the Tekonsha Custom Wiring Adapter for Toyota Part # 3040-P, with the adapter # 331-TPH-017 to plug into the controller.
With these two wired together, this will give you the plug and play installation you are looking for when using the Redarc Tow-Pro Liberty Part # RED24FR.
view full answer... - How Easy Is It To Install Redarc Liberty RED24FR In A 2015 Honda Pilot?
- I would be happy to help, but we do not have an install video of the # RED24FR in a 2015 Honda Pilot like yours.
The difficulty of installing the Redarc Liberty Trailer Brake Controller # RED24FR in your 2015 Honda Pilot will be dependent on if you have the factory tow package or not.
If you have the factory tow package then all you will need to do is drill a hole to mount the control knob, and use the Plug In Wiring Adapter # RED59FR to plug into the factory trailer brake controller
view full answer... - How To Install Redarc Tow-Pro Liberty Brake Controller On 1996 GMC C/K Series 1500
- It sounds like you might be looking to install the Redarc Tow-Pro Liberty Brake Controller part # RED24FR on a 1996 GMC C/K Series 1500. If so, the Redarc Tow-Pro Liberty Brake Controller is an excellent choice with minimal dash space required. The main components are all behind the scenes. In order to install this on a C/K Series 1500 you'd simply need the Universal Installation Kit for Trailer Brake Controller part # ETBC7. It will require an existing 4-way like the T-One Vehicle Wiring
view full answer... - Parts Needed to Install Redarc Tow-Pro Liberty in a 2004 GMC Yukon
- Yes. You can install a Redarc Liberty # RED44FR on your 2004 GMC Yukon when you use the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controller # RED69FR and Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - GM # 3015-S. This will give you a plug and play installation of the Liberty; you'll just need to splice the wired ends together with the butt connectors included with the Tekonsha # 3015-S harness.
I've linked some review videos of these parts
view full answer... - Brake Controller Recommendation for 2015 Volkswagen Touareg
- For what you described wanting I would recommend the Redarc Tow Pro Liberty part # RED24FR with universal harness part # RED69FR. This controller isn't the most expensive option but it's what I would consider the best in terms of performance, reliability, and it's only option that would only require mounting a small knob on the dash of your vehicle unlike a standard controller.
view full answer... - Recommended Trailer Brake Controller For a 2024 Toyota Tundra
- I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR for your 2024 Toyota Tundra. This will easily connect to your factory wiring with the Plug N Play Wiring # RED49FR making for a simple installation. You can also use the Mounting Panel # RED48FR to install the control knob to your dash.
view full answer... - Redarc Tow-Pro Liberty Mounting Hole Dimensions for 2020 Forest River Sunseeker Motorhome
- Thanks for reaching out!
The control knob for the Redarc Tow-Pro Liberty # RED24FR requires both a 1/8" and a 3/8" hole to be drilled one above the other as you can see in the attached photo. The centers of these holes should be 0.3" apart so overall you're looking at an area about 3/8" wide x 9/16" tall minimum.
It sounds like your 2020 Forest River Sunseeker Motorhome has the tow package wiring so you'll be able to install the Tow-Pro Liberty using the wiring harness adapters #
view full answer... - Recommended Brake Controller for a 2022 Toyota Tacoma TRD
- The Redarc Tow-Pro Liberty Brake Controller item # RED24FR will work great with your Tacoma TRD. It is a proportional brake controller that responds based on your Toyota's deceleration. The harder you brake the stronger it engages your trailer brakes.
The 3-Axis accelerometer measures deceleration in all directions for precise braking and smooth stopping action. It can be mounted at any angle and will still accurately sense the deceleration of your Tacoma.
To complete the installation
view full answer... - Why Isn't My Brake Controller Lighting Up When In Use
- If you are having trouble with your Redarc controller # RED24FR you need to first check the fuse that powers the brake controller. If you check the owner's manual it will let you know where the fuse is located at. You can also make sure that all of the pins on the receiving connector are all connecting with the controller itself. Sometimes the pins in the harness can get damaged or bent to the point where you would need to get a replacement adapter another option is to check that all the
view full answer... - Parts to Install Redarc Tow-Pro Elite Brake Controller in 2015 Jeep Grand Cherokee w/ No Tow Package
- If your 2015 Grand Cherokee doesn't have the factory 7-way, it won't be prewired for a brake controller, so you'd need to do a hardwire installation. It's not the end of the world, the install procedure isn't too difficult.
You'll need the Redarc Tow Pro Elite controller, part # RED24FR, our Brake Controller Install kit, part # ETBC7 and a # 118727 trailer wiring harness.
You'd begin by installing the # 118727 which would tap into the tailigiht circuits of your Grand Cherokee so
view full answer... - Redarc Tow-Pro Liberty Brake Controller for 2018 2WD GMC Canyon
- Yes, I do agree with your choice it sounds like you have done your research. The Redarc Tow-Pro Liberty Brake Controller item # RED24FR is a great brake controller and would work well for your application. It is a proportional brake controller that works with electric or electric over hydraulic brakes. You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED69FR for your 2018 GMC Canyon. The main unit of the brake controller is able to be mounted
view full answer... - Compatibility of Redarc Tow-Pro Liberty Brake Controller with Factory Plug on 2006 Ford F-250
- The Redarc Tow-Pro Liberty Brake Controller # RED24FR will work with your 2006 Ford F-250. It will need the both the Wiring Harness for Redarc Tow-Pro Liberty Trailer Brake Controllers # RED69FR and the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail # 3065-S to plug into your factory plug. These wiring harnesses will connect to each other so both are required.
Because your vehicle has the factory brake controller and wiring connection, no additional parts are
view full answer... - Does Redarc Tow-Pro Liberty LED Only Flash When Trailer is Connected
- Good question, and a trailer does need to be connected in order for the LEDs to be on when using the Redarc Tow-Pro Liberty Brake Controller # RED24FR.
If a trailer is not connected and you press the manual override of the Liberty # RED24FR, the LED will just flash blue, but go out again, which means the controller does have power.
view full answer... - Can The Redarc Tow-Pro Liberty RED24FR Be Installed On A 2019 Ford Ranger W/ Curt 7-way Connector?
- You can absolutely install the Redarc Tow-Pro Liberty # RED24FR in your 2019 Ford Ranger that has the Curt 7-way Connector Harness # C56431 installed, you will just need the universal wiring harness # RED69FR.
While Ford did not run a trailer brake controller port for installing a trailer brake controller like some other vehicles have, they did run the four wires you need. These will be located underneath the dash near the driver side wheel well and will be bundled together.
Inside
view full answer... - Parts Needed to Install Redarc Tow-Pro Liberty Brake Controller on 2021 Jeep Grand Cherokee
- If your Grand Cherokee has the factory 7-way at the back bumper, it'll be prewired for a brake controller. You'll need the # TK93VR wiring harness and the # 331-TPH-017 adapter. The # TK93VR harness will plug into the factory connector located under the dash to the left of the steering column, above where the driver's left knee would be. The # 331-TPH-017 adapter plugs into the harness, the other end plugs into the controller.
If your Grand Cherokee does NOT have the factory 7-way, you'll
view full answer... - Troubleshooting Difficulty Calibrating The Redarc Tow-Pro Liberty
- We have never encountered a case of a 4Runner needing a diode in order to use the Redarc Tow-Pro Liberty # RED24FR. If you suspect voltage is low you could always go in and test with a volt meter.
The Redarc Encapsulated Power Diode # RED34FR is generally only needed on vehicles with certain advanced safety systems like the Adaptive Cruise Control, Assisted Emergency Braking and Autonomous Emergency Braking. Since you are using the plug-and-play pigtail # RED49FR you should not need
view full answer... - Correct Wiring Harness for Redarc Tow-Pro Liberty Installation on 2023 Toyota Tacoma
- There is a custom wiring harness you can use to install the Redarc Tow-Pro Liberty # RED24FR on your 2023 Tacoma. What you need is the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED99FR. This will plug into the port underneath your dash for an easy installation.
view full answer... - Recommended Brake Controller to 2024 Nissan Frontier With Tow Package
- For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will be visible. The knob controls the braking power and acts as the manual override. It also uses colored LED lights for diagnostics. The # RED39FR wiring harness will plug into the port under the dash you referenced for a plug and play installation.
view full answer... - Recommended Brake Controller for a 2007 Toyota Tacoma
- The best brake controller for your 2007 Toyota Tacoma is the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. This is a proportional brake controller that will activate your trailer's brakes when your Tacoma decelerates or stops. It has a unique installation method where the only visible portion of the controller is the nickel sized control knob. The main unit can be mounted in any position underneath or below your dash.
If your Tacoma has the factory tow package then you will
view full answer... - Troubleshooting Redarc Tow-Pro Liberty Trailer Brake Controller Not Calibrating On 2017 GMC Yukon XL
- The Redarc Tow-Pro Liberty Brake Controller # RED24FR will not always calibrate unless it has a trailer connected. It seems to vary based on the vehicle as not all the trailer systems will work when a trailer is not connected to the 7-way on your 2017 GMC Yukon XL.
Since you tested the controller by pushing the button you know that it does have power going to the unit, and a good ground. Pushing on the brake is what will begin the calibration process when you have a trailer connected.
view full answer... - Recommended Brake Controller and Plug In Adapter for a 2019 GMC Yukon XL w/ the Factory Tow Package
- The best brake controller for your Yukon XL is going to be the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. This is a proportional brake controller that activates your trailer's brakes when your Yukon decelerates.
The reason the Tow-Pro Liberty is the best option is because of its unique installation method where the only visible portion is the control knob that's about the size of a nickel. The main unit is hidden away inside your dash to be completely out of the way and
view full answer... - Redarc Tow-Pro Liberty Brake Controller Installation on my 2015 Chevy Silverado 1500
- The Redarc Plug-and-Play Wiring Harness for Tow-Pro Trailer Brake Controllers part # 331-TPH-010 will plug into the area behind the large black panel located behind your emergency brake pedal. The cover is removed and the harness plugs into the upper left side of the panel. The harness is then ran straight up and the cover is replaced. From there you are ready to mount your Redarc Tow-Pro Liberty Brake Controller part # RED24FR.
Check out the linked video. While it is not on this specific
view full answer... - Lights Illuminated on Redarc Tow-Pro Elite Trailer Brake Controller When Not Connected to Trailer
- To best verify your installation of the Redarc Tow-Pro Elite Trailer Brake Controller, # RED44FR I suggest that you connect to your trailer and ops check if the brakes engage. You will not see an indicator light illuminated until connected. While calibrating it will flash green/blue. It will be red when brakes are applied and green in user-controlled braking mode.
view full answer... - Recommended Brake Controller and Wiring for 2021 Jeep Grand Cherokee
- I do have a recommendation for you but we do not have a Redarc brake controller available for your 2021 Jeep Grand Cherokee. However, the similarly designed Curt Spectrum Trailer Brake Controller, # C51170 is great option and its installation is made easier using the Curt Custom Wiring Adapter for Trailer Brake Controllers, # C51446. The Curt # C51170 is a proportional brake controller installs anywhere in your cab and at any orientation. The push-button rotary control knob mounts on
view full answer... - Recommended Redarc Brake Controller and Wiring for 2020 Jeep Grand Cherokee
- We have what is needed for your 2020 Jeep Grand Cherokee to make for an easy install. I recommend the Redarc Tow Pro Liberty, # RED24FR with the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controller, # RED77FR. The custom connector end plugs into the port beneath your vehicle's dash and the other end plugs into your Tow-Pro electric brake controller.
view full answer...
Info for these parts were:
Edited by:
Lindsey S
Video by:
Joshua S
Video by:
Jacob T
Video by:
Chris R
Video by:
Michael B
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Bradley B
Updated by:
Wilson B
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.