Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic, Elite, or Liberty Trailer Brake Controllers
Part Numbers: RED24FR,RED49FR
Retail:$210.89
Our Price: $182.50
You Save: $28.39
This item qualifies for Free Shipping
In Stock
Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
part number: RED24FR
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight behind the dash. Control your braking power with the turn of a dial, with manual override right at your fingertips.
Features:
- Brake controller activates trailer brakes in proportion to your vehicle's braking
- Automatically adjusts trailer's braking based on deceleration of tow vehicle
- Dash-mounted knob keeps your vehicle interior looking sleek while giving you easy access to the brake controller
- Lets you adjust braking power with the turn of a dial
- Gives you a manual override at your fingertips
- Offers simple diagnostics with colored LED alerts
- Main unit mounts out of sight behind the dash in any position, direction, and angle
- No more banging your knee on a bulky controller
- No interference with airbags or other vehicle accessories
- Universal wiring harness (RED69FR - sold separately) or vehicle-specific adapter (sold separately) required for installation
- Meets or exceeds both UNECE R21 and FMVSS 201 regulations for sustainability and safety
- Made in Australia
Specs:
- Application: trailers with up to 2 axles (4 brake assemblies)
- Compatible with electric or electric-over-hydraulic trailer brakes
- Main unit dimensions: 4" long x 3-3/8" wide x 1-1/8" tall
- Control knob dimensions: 1-7/8" long x 9/16" wide x 3/4" tall
- Length without dial: 1-1/4"
- Output voltage range: 9V - 16V
- Output current rating: 18 amps continuous
- Maximum charging voltage: 12V DC
- 2-Year warranty
Tow-Pro Liberty Operation
The dash-mounted knob puts control of your trailer's brakes at your fingertips. In addition to offering fast, simple power adjustment and an easily accessible manual override, it has colored LED signals that let you know what the brake controller is doing at a glance.
When you are calibrating the brake controller for the first time, the LED lights will signal your progress. To finish setting up the device, you will need to drive your vehicle in a low-traffic area and brake 20 times or so to let the unit learn its orientation and the direction of travel. If your trailer is connected, the LED light will flash green/blue as it processes the information. If there is no trailer connected, the unit will still calibrate, just without the knob lighting up. The knob will stay blue longer as the calibration process gets closer to being done. When the display turns solid blue, initial calibration is complete. The unit will remain calibrated for the next time that you tow. If recalibration is required, it will happen automatically and without LED indication.
Once the brake controller is activated, you can use the knob to set the maximum amount of power that will be applied to your trailer's brakes. Typically, this power is only readjusted when you experience changing road conditions or if you switch over from a heavy, loaded trailer to a much lighter, empty trailer, or vice versa. To get more power to your brakes, rotate the knob clockwise toward 10. To decrease the power output, rotate it counterclockwise toward 0.
When you apply the tow vehicle's brakes, the knob will change from blue to red to signal that the trailer brakes are being activated. The higher the braking power output, the deeper the red that you will see.
The Tow-Pro Liberty keeps the manual override within easy reach, great for stopping sway or controlling your trailer's momentum in emergencies. To engage the manual override, just press the control knob. This will activate the trailer's brakes and brake lights without you having to apply the brakes on your tow vehicle, perfect for limiting trailer movement while you're cruising.
Simple, Out-of-the-Way Installation
Unlike most proportional controllers on the market, the Tow-Pro Liberty has almost no mounting restrictions. It comes in 2 pieces - the main unit and the control knob. Because the only part that you need to be able to access is the control knob, the main unit can be mounted out of sight and out of the way. You don't have to worry about dinging your knee on a bulky brake controller or interfering with your vehicle's lower airbags.
The dash-mounted control knob can be installed in any convenient spot that's easy for you to see and access. This can be a blank switch panel, an open spot on your center console, or wherever there's space on your dashboard. You can pick up a universal mounting panel (331-TPSI-001 - sold separately) for a clean, from-the-factory look. Custom-fit panels are available for certain vehicles as well. Before you do any drilling, be sure there's room behind the dash for the entire knob to install, including the part you don't see!
Once you've decided where you want to put the control knob, you'll need to find a good place to install the main unit. Your only restriction is the 3' plug-in cable that has to be able to reach between both the main unit and the control knob. Securely mount the box using screws, double-sided tape, or zip-ties (not included). A mounting kit (RE67FR - sold separately) is also available for the Tow-Pro Liberty. Do not zip-tie the box to wiring or cables that can shift as you drive.
A vehicle-specific wiring harness is available for most newer trucks and SUVs. One end of the custom adapter plugs into your vehicle, and the other end either plugs directly into the controller or will splice to the wiring harness - no need to hardwire to your vehicle. If a custom brake control wiring adapter is not available for your vehicle, you will need a universal wiring harness (RED69FR - sold separately). A 30-amp circuit breaker kit (331-CBK30-EB - sold separately) may also be required for installation.
For assistance in properly wiring the Tow-Pro Liberty, please refer to the diagrams below:
Installation Accessories
See etrailer.com's exclusive 7- and 4-way brake-control installation kit (ETBC7 - sold separately) if you don't already have a 7-way plug at the back of your vehicle.
Proportional Braking
The Redarc Tow-Pro Liberty Brake Controller comes equipped with proportional braking to give you the best towing experience. Proportional braking means that your trailer brakes mimic your tow vehicle's brakes. If you slam on the brakes in your vehicle, your trailer brakes will activate with the same intensity; if you brake lightly, your trailer brakes lightly too. The trailer's braking is in proportion to your vehicle's braking. This saves wear and tear on the tires and the brakes on both your vehicle and trailer.
The Tow-Pro Liberty uses an internal 3-axis accelerometer to sense how your vehicle is braking so it can send the right amount of braking power to your trailer. It measures the inertia of your tow vehicle and activates the trailer's brakes to slow at the same rate. The result is uniform braking across your towing setup. No push-pull action - just smooth, proportional braking every time.
EBRH-ACCNA Redarc Tow-Pro Liberty Trailer Brake Controller - Dash Mounted Knob - Hidden - Proportional Brake Controller
Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic, Elite, or Liberty Trailer Brake Controllers
part number: RED49FR
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.
Features:
- Wiring adapter eases installation of your Redarc Tow-Pro Classic, Elite, or Liberty electric brake controller
- Custom connector end plugs into the port beneath your vehicle's dash
- Other end plugs into your Tow-Pro electric brake controller
- Some wire splicing required for Tow-Pro Classic
- Made in the USA
- 2-Year warranty
TPH-021 Redarc Wiring Harness for Tow Pro Electric Brake Controllers - Plug and Play
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional - RED24FR
Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic, Elite, or Liberty Trailer Brake Controllers - RED49FR
Average Customer Rating: 4.8 out of 5 stars (1849 Customer Reviews)
Mount the control knob of this proportional brake controller on your dash for a factory look, and install the main unit out of sight behind the dash. Control your braking power with the turn of a dial, with manual override right at your fingertips. Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.by: Charles04/24/2023
The hardest part was getting the zip ties tightened around the module without completely removing the trim under the steering wheel. I chose near the shifter for my location so it’s easy to reach but still out of the way.
by: Gary02/27/2023
Works great! No more readjusting between hi way and Campground driving. Looks great. Straight forward instruction for installation.
by: Reuben07/24/2022
This thing is so much better than the old controller I used to use. I like that it lets the break off after you stop moving even if you have your foot on the petal. Smooth breaking response all together. Plus, I was able to install the knob in an unused switch blank in my 2020 Pilot. You do have to be a little crafty to get it to fit there but it is possible.
by: Bobby Q07/25/2022
I was surprised how nice this brake controller is - clean install with the unit up under the dash. I installed the knob in one of the 'blanks' in the dash for a really clean look. No banging knees on older-style controllers under the dash. Thanks!
by: Jerry04/10/2024
Being new to towing a larger trailer requires research. After doing a lot of it, both through user reviews and manufacturer websites, we landed on the Rearc Liberty Brake Controller for our Tacoma. We have just over 1000 miles towing with this unit. It has performed extremely well. Towing for us includes city, highway, mountains, and even off-road to access our mountain home. Installation was straight forward and the ability to install the controller in virtually any position is an added bonus. I was able to install the dash knob in a blank panel giving the Tacoma a factory appearance, and controller located under drivers seat. I installed this unit on a non tow package Tacoma, so wiring was a bit intimidating at first. But using etrailer’s web site as a reference had everything operational in a couple afternoons. Great product so far and we look for years of use. Highly recommend.
by: Brad02/25/2024
Installed this in my 4runner that I use to haul several thousand pounds of metal boxes on an aluminum heavy variant tilt deck trailer. Install was fast and easy, the main unit is small and is easily tucked up under the dash. I drilled one small hole and placed the small lighted selector (small blue light) on the key side of the steering wheel area (see pics) and looks like it came factory from the truck. Its sasy to adjust and robust enough that it wont move settings on its own, even in rough off road conditions that a 2WD vehicle cant go. Ive had other controllers in the past but am super happy that I had lucked out and found this proportional one from Redrac with the dash knob.
by: Mike05/06/2023
The controller looks and works great. The colors are very easy to see what the controller is doing. No led colors are displayed when there is not a trailer plug in, so it almost disappears on the dash.
Reason I only gave 4 stars out of 5, like others said, the universal harness should have come with it like it does with the Elite. My truck is older so I needed the universal harness. You should only have to buy one if it is a direct plug and play for newer trucks.
by: Dean W04/20/2023
Very clean option for a proportional trailer brake controller. Nothing to knock your knees on and easy to access for extra braking as I mounted it in the dash of my E350.
by: Thomas08/05/2023
2018 Kia Sorento
This review includes the following items: Item #RED69FR - Wiring Harness, 30A Breaker kit and Item # ETBC7 Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat and Item #RED24FR Controller. I wanted to be sure I had everything. A local place Custom Coach on Pulaski Hwy, Baltimore did a fantastic job on the install, Sorry I can't remember the techs name. I have a 2018 Kia Sorento SX V6, AWD with 4 pin Tow Pkg. car rated for 5k/500# load. Trailer is a 2022 Palomino Real Lite RL-186. I've logged 2 trips so far 1 to NYS mostly highway and to Cass, West Virginia area. The controller adapted quickly, I went to a '5' to a '4' setting even in the mountains it was smooth no jerking. The one picture shows installation ubder the dash totally out of the way. It works great!
by: James02/15/2023
Install was quick and easy. The only thing that gave me grief was that darn "Trailer Brake Warning Fault" message that kept displaying on my message information display on dash. After troubleshooting for several days and calling etrailer for assistance with no solution, I tried calling Redarc with the included state-side tech support. The number puts you in touch with an Ausie down under so you have to adjust your call with thier time zone. Turns out, and VERY IMPORTANT,if you are replacing an OEM Trailer Brake Controller already installed in truck. The TBC Controller Brake Module has to be deactivated to make the fault go away. Truck still think it has a TBC and is looking for it. I used Forscan software to deactivated it through the OBDII port.
I love the features of the RedArc Tow Pro Liberty and its ease of use..
by: HotToddy03/18/2023
2023 Hyundai Palisade
I haven't had the opportunity to install this brake controller yet, but so far I like what I see. Especially the small profile of the controller and the dash knob. I bought this to tow a 17' Casita travel trailer. I am just waiting on the 7-pin tow harness from Hyundai before I can put it all together. The instructions indicate that all of the connections are plug and play, so I anticipate a pretty straightforward install.
by: John03/27/2023
Toyota 4Runner
Installation went just like the video. I needed a break controller on my 4Runner, but didn't like the look or placement of a "stranded" break controller. Redarc Tow-Pro fit and look, or lack of look that I was Looking for. On my 4Runner I did move the factory switch placements around so the searing wheel didn't block my view of the break controler.
by: Sandra04/10/2023
2018 Toyota Highlander
Relatively easy install. I think it would be good if you would update the kit to include a 1 amp diode and instructions to install it. This is to prevent backfeed of electric current from brake controller which causes error issues on the 2018 Toyota Highlander.
by: C White05/02/2023
Great product, shipped fast and I could not be happier with the "from the factory" appearance of the installation. I painted the embossed letters in the switch mounting plate so it would match the other switches. The brake controller works well and it really looks great.
by: Gary04/12/2023
Toyota Highlander
Simple to install. Worked smoothly and is as aggressive as you need. No more knee banger. Unit installed easily out of sight. Control is easy to access on the dash. The Adapter for the blank switch cover is a must for a clean installation on the Toyota Highlander.
by: Dick03/08/2023
2004 Dodge Ram Pickup
Works great and is out of the way. Just find a place under the dash that is secure and bolt or plastic wire tie it in. I had to buy the universal wiring harness also so I could wire it to my 7 pole. You would think it would come with one but I’m guessing there are many types of wiring for each vehicle manufacturer.
by: Tom03/07/2023
I love this brake controller. I put it in my brand new 2023 Silverado 1500. It looks factory the way I installed it. No big bulky controller hanging under the dash. Would highly recommend.
by: Kenneth07/18/2021
Expedited shipping was super fast with no problems. I installed the unit myself and it was fairly simple. I recommend getting the exact fitting wire harness (huge time saver) and I’d recommend getting and exact fit knock out to install the dial in. (Another big time saver). I drilled a hole in my own blank or knock out thingy and I’m pleased with it but it took a little time. I’ve got a 2010 Honda Pilot. Funny thing, after rushing to install the brake controller, our trailer had to go in for repairs before we even completed the transaction. It will be another month before I actually use the brake controller.
by: Robert03/20/2024
Install took about an hour and a half. I have big hands that didn't play well with the room under the dash. The controller didn't go into setup mode until I hooked up the trailer and drove around. Other than that so far so good.
by: John M.06/03/2023
etrailer is an excellent e-commerce store that has great products and fantastic employees that are always willing to help. The photos and videos are super helpful.
by: JDen03/21/2024
I installed this over a year ago in my Honda Pilot. The video was the perfect help. It worked like a charm and like so clean and professional. I could not be happier.
by: Keith07/15/2023
2019 Jeep Grand Cherokee
Like the way the main unit is hidden from view. The control knob looks original equipment. Found a place just in front of the gear lever to mount the main unit. Using one original screw and one self tapping. I mounted the control dial adjacent to it. Easy to see and very close to where my right hand rests on the steering wheel. I docked one star because I had to lengthen the 'plug and play' harness by six inches.
by: Butch11/28/2022
2017 Honda Ridgeline
The Redarc controller was very easy to install in my 2017 Honda Ridgeline truck. In fact, it was so easy that I wasn't certain that I had installed it correctly because it didn't light up to acknowledge that it was indeed working. After reviewing the instructions, again, I realized that it was noted that there may not be any lights acknowledging proper install when a trailer wasn't attached but it would go through the setup procedure. When I went to pickup my new tractor and trailer, it lit up and worked like a charm.
by: Jeff11/07/2023
Clean install. I really like these Redarc controllers. 2021 Nissan NV 3500 Passenger. etrailer kit with controller and wiring adaptor was just the thing. Under dash drill access for mounting the module isn’t ideal, but doable. Great kit and great price. Looks great
by: Pierre04/02/2024
Honda Pilot
The website is easy to navigate and the information provided extremely useful to make an educated choice. The product fits my Honda pilot nicely.
The client service is over the top, I appreciated the immediate call back to check and confirm my order.
25
1769
Show More Reviews Ask the Experts about this Trailer Brake Controller
Do you have a question about this Trailer Brake Controller?
- Parts Needed to Install Redarc Tow Pro Liberty in 2010 Toyota Tundra
- The Redarc Tow Pro Liberty part # RED24FR is a fit for your 2010 Toyota Tundra and would work great in your 2010 Toyota Tundra. You'd just need two install harnesses part # 3040-P and # 331-TPH-017 then you'd be set.
view full answer... - Parts Needed To Install Redarc Tow-Pro Liberty RED24FR In 2021 Ram 1500 Big Horn
- To install the Redarc Tow-Pro Liberty # RED24FR in your 2021 Ram 1500 Big Horn you will need the Plug-in Adapter # 331-TPH-020.
The # 331-TPH-020 will plug in to the factory trailer brake controller port underneath the dash of your truck and then into the Liberty # RED24FR. This will be the only wiring connection you will need to make.
I included videos of the products mentioned for you to take a look at.
view full answer... - Parts Needed to Install Redarc RED24FR Tow-Pro Liberty Brake Controller on 2009 Dodge Ram
- I'd be happy to help you with that.
Because your truck is already equipped with the factory 7-way, all you'll need is the # RED24FR Redarc Tow-Pro Liberty, the # RED69FR pigtail and a # 3020-S Dodge-specific harness. The harness would wire to the pigtail, color for color which would plug into the factory connector located atop or next to the white box on the firewall behind the e-brake pedal as shown in the linked video and the provided photo.
The control knob for the controller
view full answer... - Wiring Needed To Install A Redarc Tow-Pro Liberty Brake Controller On a 2008 Dodge Ram 3500
- The Redarc Tow-Pro Liberty Brake Controller # RED24FR does not include any wiring for connecting to your vehicle as you have found out already.
The Redarc Universal Wiring Harness # RED69FR (TPH-025) that you found will plug into the Tow-Pro Liberty controller and allow you to wire it to your 2008 Dodge Ram 3500.
If your Ram came with either the factory installed 4-way or 7-way harness you can use the Tekonsha Custom Wiring Adapter # 3020-S to plug into the factory port underneath
view full answer... - What Wire Should The Red Wire From Redarc Brake Controller Connect on 2022 Toyota Sienna?
- When we installed the Redarc Tow-Pro Liberty Brake Controller # RED24FR on a 2022 Toyota Sienna in our shop we determined the blue wire coming out of the brake switch to be the correct wire to connect to the red wire for the Wiring Harness # RED69FR. I have included this install video below which you can see at the 15:05 time mark in the video. I do recommend using a Test Light # PTW2993 to verify this is the correct wire on your Sienna as well.
view full answer... - Troubleshooting 3020 Brake Controller Only Sending 5V on Output Wire
- It sounds like you've done everything right when it comes to troubleshooting your brake controller. If you have the gain cranked up all the way and you're still only seeing that 5V coming through the output of the controller then that tells me there is something internal going on with the controller and it needs to be replaced. If it has a lifetime warranty I recommend taking advantage of that, otherwise we have a variety of options to choose from.
For a replacement controller I highly
view full answer... - How To Remove Control Dial From Redarc Tow-Pro Liberty Brake Controller
- The control knob on the Redarc Tow-Pro Liberty Brake Controller part # RED24FR is held in place with friction. The initial install of the control knob will need to be done with the dial set to 0 but if you mess up you can simply pull the knob off and retry. Removing the head a few times won't be an issue but if you do this persistently it could lead to a loss of friction and loose fit.
view full answer... - Which Harness to Install a Redarc Tow Pro Liberty in a 2021 Ford Ranger
- Yes. In order to install the Redarc Tow Pro Liberty # RED24FR on your 2021 Ford Ranger you'll want to use the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED69FR. This harness will allow you to hard wire in a Redarc controller on your Ranger.
view full answer... - Where To Connect Red Wire Of Redarc Tow-Pro Liberty To 2016 Kia Sorento W/ Adaptive Cruise Control
- I would be happy to help!
You are correct that on vehicles like your 2016 Kia Sorento you will not want to get the brake light signal directly from the stop light switch. Picking up the signal there will only activate the trailer brakes when you press the brake pedal, and not when the adaptive cruise control you have applies the brakes.
Instead to install the Redarc Tow-Pro Liberty # RED24FR you were looking at you will need to route the red wire to the 3rd brake light of your Sorento
view full answer... - Should There Be a Light On the Redarc Tow-Pro Liberty Brake Controller While Driving Without Trailer
- In regards to the Redarc Tow-Pro Liberty Brake Controller part # # RED24FR, the unit should not be illuminated while driving without a trailer. If you press the button while a trailer is not attached you should see a breathing blue light and that simply indicates the controller is in sleep mode. This is further explained in the manual so please give this a look over.
view full answer... - Redarc Plug and Play Brake Controller Adapter for a 2021 Audi Q7
- Since your 2021 Audi Q7 has the factory tow package you do have a brake controller port but Redarc didn't make a specific plug and play adapter for it. There is a work around that will let you install your Redarc Tow Pro Liberty item # RED24FR or Elite item # RED44FR without having to cut or splice wires. You can use the following two adapters connected together instead of having to hardwire:
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item # TK22FR
Redarc Tow-Pro Wiring
view full answer... - Recommended Trailer Brake Controller For a 2020 Honda Ridgeline
- I recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR for your 2020 Honda Ridgeline. This brake controller will mount behind the dash with only the control knob visible on the dash. You can easily make adjustments as well as manually override the brakes using control knob. As this controller is proportional it will automatically adjust the braking force sent to the trailer based on how hard you brake inside your Ridgeline.
The Plug-and-Play Wiring Harness # RED59FR will
view full answer... - Does 2022 Ram 1500 Need to be Programmed to Work with Redarc Tow-Pro Liberty Brake Controller
- The Redarc Tow-Pro Liberty Brake Controller # RED24FR will fit to the connector on your 2022 Ram 1500 by using the Wiring Adapter # 331-TPH-020. As long as you aren't replacing an OEM controller you'll be able to just plug this into your truck and be good to go without getting anything programmed or flashed by a dealer!
Attached is an installation video of this kit on a 2016 Ram truck for you to check out.
view full answer... - Brake Controller Recommendation for 2022 Hyundai Santa Cruz Premium with 4-Way
- Hey Karen, so your 2022 Hyundai Santa Cruz Premium does have the tow package based on what you have mentioned. So what you need to convert your 4-way to a 7-way and install a brake controller as easily as possible is the Curt 7-way kit part # C68JR which installs without requiring any extensive wiring.
Then for a brake controller I really like the Redarc Tow Pro Liberty part number # RED52VR which gives you a proportional brake controller that only puts a small knob on the vehicle dash.
view full answer... - Brake Controller Recommendation for 2005 Toyota Tundra SR5
- Hey Deanna, the brake controller I recommend for your 2005 Toyota Tundra is the Redarc Tow Pro Liberty part # RED24FR as it only puts a small knob on the dash of your truck and uses an inertia sensor to determine how hard you are hitting the brakes for applying the trailer brakes. To wire it to your truck all you need is the correct install harness which is part # RED49FR.
view full answer... - Adding 7-Way And Brake Controller To A 2024 Toyota Tundra Without Factory Tow Package
- Hello Robert, we can definitely help set you up with a 7-pin plug and brake controller for your 2024 Toyota Tundra SR Without the tow package. You can use the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT along with the Universal Install Kit # ETBC7. This will include all of the components needed to wire the 7-way, including all of the necessary wires for a brake controller.
For the Brake controller I recommend the Redarc Tow-Pro Liberty # RED52VR. mainly because it is easy
view full answer... - Plug & Play Wiring Harness For Installing Redarc Tow Pro Liberty Brake Controller on 2023 4Runner
- Yes, the Wiring Harness # RED49FR will allow you to connect the Redarc Tow-Pro Liberty Brake Controller # RED24FR directly to the factory connector on your 2023 Toyota 4Runner. I recommend combining this with the Mounting Panel # 331-TPSI-002 for a clean factory appearance.
view full answer... - Plug-and-Play Wiring Harness for a Redarc Tow-Pro Liberty Brake Controller in a 2022 Toyota Tacoma
- The correct harness to use the Redarc Tow-Pro Liberty Brake Controller # RED24FR in your 2022 Toyota Tacoma is the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED99FR.
view full answer... - Parts Needed to Install Redarc Tow-Pro Liberty Brake Controller on 2021 Jeep Grand Cherokee
- If your Grand Cherokee has the factory 7-way at the back bumper, it'll be prewired for a brake controller. You'll need the # TK93VR wiring harness and the # 331-TPH-017 adapter. The # TK93VR harness will plug into the factory connector located under the dash to the left of the steering column, above where the driver's left knee would be. The # 331-TPH-017 adapter plugs into the harness, the other end plugs into the controller.
If your Grand Cherokee does NOT have the factory 7-way, you'll
view full answer... - Plug and Play 7-Way Trailer Connector Installation for 2022 Honda Pilot
- I'd be happy to help with that. You'll need the Tekonsha # 118286 7-way harness which is a plug and play install as shown in the linked video. If your trailer doesn't have brakes, simply install the harness as shown, and you'll be good to go.
If your trailer has electric brakes, you'll also need to install a brake controller to actuate them. The Redarc Tow-Pro Liberty, part # RED24FR would be a great choice. The controller itself mounts under the dash out of sight, and everything is
view full answer... - Can The 2022 Toyota 4Runner Factory Pigtail Be Used When Installing A Redarc Controller?
- The only differences between the factory pigtail and the Redarc Pigtail # RED49FR (Redarc part number TPH-021) will indeed be the external ground and a diode pre-installed on the red wire. There were a few issues with brake controller wiring in the past and this was the quick and easy fix for the issue. As there is a diode included in the pigtail, you will need to add one to get the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR working properly. And just as a side note, I really
view full answer... - Parts Needed to Install Redarc Tow Pro Liberty in 2016 Toyota 4Runner Trail
- The three items you mentioned are all that's needed to install the Redarc Tow Pro Liberty part # RED24FR in your 2016 Toyota 4Runner with the tow package:
# RED24FR
# 331-TPSI-002
# RED49FR
view full answer... - What Plug-N-Play Harness and Mounting Panel will Fit My 2021 Toyota 4Runner?
- The correct plug-n-play adapter you need is the Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic or Elite Trailer Brake Controllers # RED49FR. This adapter is compatible with your 2021 Toyota 4Runner and the Tow-Pro Elite Brake Controller # RED44FR. As far as the mounting panel, the one compatible with your vehicle is the # 331-TPSI-002.
view full answer... - Wiring Harness And Brake Controller Recommendation For 2022 Toyota 4Runner
- If you have a factory tow package you will need the following items to pair with your Redarc Tow-Pro Liberty Brake Controller - Proportional, part # RED24FR. The Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic or Elite Trailer Brake Controllers, part # RED49FR, plugs into your Tow Pro Liberty and your 2022 Toyota 4-Runner.
Next you will need the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob, part # 331-TPSI-002.
I have included product description
view full answer... - Brake Controller Port For Redarc Harness on 2014 Toyota Tundra
- Hi Mark; appreciate the purchase and there is but I can also go ahead and show you where the brake controller port is on your 2014 Toyota Tundra to connect the Redarc Plug-and-Play Wiring Harness # RED49FR.
Hopefully showing this photo will be easier and if you take a look you can see the white connector for the plug. It's exactly where you mentioned - behind the kick panel on the driver's side - so I'm confident you have found it based on what you described.
view full answer... - Parts Needed When Installing a RedArc Brake Controller on a 2021 Toyota 4Runner
- Whether you are using the user controlled mode (manual mode) or the proportional mode on the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR there is no need for a diode. The only other thing you would need to install the RedArc Tow-Pro Eilte would be the Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic or Elite Trailer Brake Controllers # RED49FR (if you have the tow package, I am assuming you have the tow package due to the product linked being the tow package harness)
view full answer... - Brake Controller Wiring Adapter for a 2022 Toyota 4Runner and Redarc Tow Pro Elite
- Yes, there is an adapter for you. The Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic or Elite Trailer Brake Controllers # RED49FR is what you are looking for. Plug one end of the adapter into your Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR and plug the other end in beneath your Toyota 4Runner's dash.
view full answer... - Plug-In Wiring Adapter For Redarc Liberty Brake Controller For 2016 Toyota 4Runner w/ Tow Package
- By "currently wired" I do assume that means your 2016 Toyota 4Runner has the factory tow package, and the plug-in adapter is all that you will need to install the Liberty brake controller; the correct part numbers for the controller and adapter for your 4Runner are the following:
- Redarc Tow-Pro Liberty Brake Controller # RED24FR
- Plug-and-Play Wiring Harness # RED49FR
view full answer...
Info for these parts were:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Dustin K
Updated by:
Wilson B
Video by:
Jonathan Y
Video by:
Thomas T
Test Fit:
Conner L
Written by:
Kristina F
Installed by:
Michael B
Installed by:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.