bing tracking image

2004 Acura TL Roof Rack by Rhino Rack

Roof Rack Includes:

Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 49" Long - Qty 2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof

Part Numbers: RRVA126S-2,RRRLKVA,DK067

This item qualifies for Free Shipping

In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me

Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 49" Long - Qty 2
part number: RRVA126S-2

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included.


  • Sleek, low-profile crossbars let you build an aftermarket roof rack for your vehicle
    • Rhino-Rack legs and custom fit kit create a complete roof rack
  • Slim, elliptical crossbar shape helps to create an extremely aerodynamic system
  • Full-length bars extend past roof rack legs to maximize space for carriers and accessories
  • Top channels let you add channel-mounted carriers and accessories
    • Clamp-on accessories mount conveniently around bars
  • Rubberized Vortex strips in top channels dramatically reduce drag and wind noise
    • Keep dirt and grime out of crossbars
    • Provide cushioning and slip resistance for your cargo
  • Bottom channels allow easy installation to Rhino-Rack roof rack legs
    • Rulers in channels help to center crossbar on your roof
  • Lightweight, structural-grade anodized aluminum bars are rustproof
    • Internal H-shaped extrusion provides exceptional bar strength
  • Plastic lock cores with universal keys deter theft of channel-mounted accessories
    • Can be upgraded to all-metal locks (RRVA-LEC4 - sold separately) for added security
  • Matte silver finish


  • Quantity: 2 crossbars
  • Weight capacity: 165 lbs
  • Dimensions: 49" long x 3-1/8" wide x 1-3/16" tall
  • Limited lifetime warranty

Rhino-Rack Vortex Aero crossbar

These low-profile, aerodynamic Vortex Aero crossbars let you build a stylish aftermarket roof rack from scratch. The crossbars require 4 Rhino-Rack legs (manufactured in 2014 or later) and a custom fit kit to mount it to your roof. Each bar extends past the roof rack legs to maximize the space for mounting carriers and accessories. Rubberized Vortex strips in each crossbar's top channel disrupt airflow for a quiet ride, and the bars are constructed of aluminum so they won't rust. The crossbars also include Secure Core endcaps with plastic locks to help deter theft of channel-mounted accessories.

Aerodynamic Design

Vortex Aero noise-reducing top channel strips

The rubberized Vortex strips in the top channel of each crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbars cut through the air with minimal drag - even at highway speeds.

Strong, Durable Construction

Vortex Aero crossbar H-shaped extrusion

The Vortex Aero crossbars are made of structural-grade anodized aluminum with H-shaped internal extrusions. These extrusions strengthen the bars without adding a significant amount of weight. And the aluminum bars won't rust so you can leave them on your roof year-round.

No-Hassle Installation

Rhino-Rack Vortex Aero bottom channel ruler

Each crossbar has a channel in the bottom for mounting to Rhino-Rack roof rack legs (sold separately). Each end of the channel includes a rubber ruler to help you center the bar on your roof. Simply use the numbers and hash marks on the rulers to ensure the legs are spaced properly in the channel.

Channel-Mounted and Clamp-On Accessories

Rhino-Rack Vortex Aero crossbar top-channel strips

Each Vortex Aero crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channels come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channels capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.

You can also attach most clamp-on accessories to the bars, and the Vortex strips provide shock-absorbing, no-slip cushions for any accessories that rest on them.

Built-In Security

Rhino-Rack Vortex Aero Secure Core locking endcaps

Each crossbar includes 2 Secure Core locking endcaps made of durable polypropylene. These endcaps lock with a universal tubular key. The polypropylene locks secure the endcaps to the crossbars and help to secure channel-mounted accessories to the crossbars. For maximum security, you can upgrade to endcaps with all-metal lock cores (RRVA-LEC4 - sold separately).

VA126S Rhino Rack Vortex Aero Aluminum Cross Bars - Silver - 49" Long - Qty 2

Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
part number: RRRLKVA

Durable nylon legs with built-in locks help mount Vortex Aero crossbars to your vehicle's naked roof or fixed mounting points. Leg bases pivot to level bars on your roof. Pair with 2 crossbars and fit kit to create complete roof rack.


  • 4 Legs help to mount Rhino-Rack Vortex Aero crossbars to your vehicle's naked roof or fixed mounting points
    • Pair with 2 crossbars and a custom fit kit to create a complete roof rack
  • Leg bases pivot to ensure the crossbars are level on your roof
  • Locks secure system to your roof
  • UV-stabilized, glass-reinforced nylon is durable and weather resistant
  • Allen key included to ensure legs are securely mounted to your roof
  • Limited lifetime warranty

RLKVA Rhino Rack 2500 Series Legs for Vortex Aero Cross Bars - Qty 4


Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
part number: DK067

This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.


  • Custom fit kit lets you mount 4 Rhino-Rack 2500 series legs on your vehicle with a naked roof
  • Padded, metal clamps provide secure grip on your door jambs
    • Bolt onto leg assemblies and tighten for secure fit
    • Protect door jambs from scratches and abrasions
    • Powder coated for durability and rust resistance
  • Molded-rubber pads are custom designed to fit the contours of your roof
    • Clip onto the bottoms of your roof rack legs
    • Protect your roof from scratches and abrasions


  • Quantity: 4 clamps and 4 pads
  • Limited lifetime warranty

DK067 Custom DK Fit Kit for Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof

Item # DK067

Customer Satisfaction Score:

Customer Reviews

Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 49" Long - Qty 2 - RRVA126S-2

Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 - RRRLKVA

Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof - DK067

Average Customer Rating:  4.7 out of 5 stars   (6687 Customer Reviews)

Aerodynamic, aluminum crossbars let you build an aftermarket roof rack for your vehicle. Full-length bars provide plenty of space for carriers and accessories. Vortex strips in C-channels reduce wind noise. Theft-deterring plastic locks included. Durable nylon legs with built-in locks help mount Vortex Aero crossbars to your vehicle's naked roof or fixed mounting points. Leg bases pivot to level bars on your roof. Pair with 2 crossbars and fit kit to create complete roof rack. This custom fit kit lets you mount 4 Rhino-Rack 2500 legs to your vehicle with a naked roof. Clamps mount to legs with bolts. Includes 4 clamps and 4 pads.

by: Rich08/26/2022

Look how nice my crossbars look? I ordered these and paid extra for expedited shipping so that I could have them to put a luggage carrier on my roof. The legs for the crossbars never showed up and the crossbars came late as well. I ran out and got a trailer hitch basket for extra storage. Tack on an extra $[XX] in addition to the extra $$ for fast shipping and I'm $[XX] into these crossbars that I couldn't use for their intended purpose. I called early enough that the company could have overnighted the legs but they just kept blaming UPS. Very disappointed.

Thank you for letting us know about this. I have already sent your information along to our customer service team to make sure they reach out to you about this.
Brooke M - 09/12/2022

by: Lee10/01/2022

The rack was easy to install and after some adjustment, it holds well to the roof. It is well made and strong. It holds my light rack on very well at high speeds and hard cornering. Conclusion, its a great rack for a vehicle that doesn't have factory rack mounts. Installation will go easier with a friend to help.

by: Ross05/06/2022
Lexus IS 250

This roof rack works great! At first I was skeptical about putting a rack on my IS250, but it couldn't have turned out better. Paired with the Yakima Highroad, I can easily transport my bikes around without worrying about anything coming loose while driving. The installation instructions for the legs and bars are pretty straightforward. Takes about 30-45 minutes total to install.

by: Charles05/11/2022

The Rhino system works great the way it is. I'm going camping next week and took the two bars out of the closet and right onto the car. No adjustments were needed. The feet fell right into the roof line where I initially set it up. All I had to do was clamp it down. Last weekend I had the basket up there with two fully loaded RTIC coolers probably pushing 150 pounds with no problems. For this trip I have my Yakima easy load bike racks on the roof. They clamped right onto the Rhino bars and they're in a much better position for loading and unloading than my last truck.

I'm very happy with the product and not expecting anything else. Thanks for following up.

by: Bill01/24/2021
Ram 2500

I purchased Rhino-Rack Vortex Aero Crossbars with Rhino-Rack 2500 Series Legs (RRRLKVA) and Fit Kit (DK284) for my 2020 Honda CR-V EX Hybrid. The rack was easy to assemble and took about an hour. The only tool not supplied that you need is a sharp knife or scissors to cut the rubber strips to length. Once assembled, the installation took about 30 minutes, making sure to measure accurately for placement. I used blue painter's tape to initially mark the locations. I then placed the white marking arrows (supplied) to align with the marks on the tape. I then removed the tape, placed the racks aligned with the arrows, and tightened the clamps.

This product seems well made and engineered (I'm a retired mechanical engineer). Kudos to Rhino-Rack and to etrailer for selling it.

I used my rack to transport two Kayaks to Baxter State Park in Maine, a trip of over 3 hours, a combination of highway, rural roads and dirt roads. The rack performed well. Worth the purchase.
Bill - 01/25/2022

by: Mary05/17/2022
Toyota Camry

I bought this last yr to haul my kayaks on my Toyota camry. Being 5'2", getting them on top of my SUV was next to impossible for me and my daughters. Since then, I have traveled from Michigan, all the way to the west coast with two 13' ft kayaks. These racks have been absolutely perfect in every aspect. I mounted them myself, and checked them regularly to see if they needed adjusted. Not once did they loosen or move. They with stood Traveling with speed limits reaching 80 mph on I84, along with the windy weather on our cross-country trip. My car moved around from the high winds, and the racks stayed put. These racks have by far reached and surpassed every expectation I had when purchasing them. I would not recommend another. Only thing I would recommend is showing installation for both front and back bars, since the measurements are slightly different for both. As I had to figure this out my self, after watching the installation video. Thank you Rhino for providing such a high quality product.

by: Mindy06/28/2022

Indeed they were the wrong parts in the box marked demo on them.
The new parts came and I was able to
Put it on my car with no problem!!

Thank you for listening to me and helping me problem solve. It looks great on my car and I'm ready to load the kayaks now!!

Kalie is a gal that sent me some return labels so I'm going to put that on the box and send it back to you guys!

by: David 09/20/2022
Buick Enclave

Rhino rack crossbars restrict moon roof operations when installed (will only open half way) on a '18 buik enclave. Not a deal breaker but something we were not aware of at purchase when researching available options for our make and model. Crossbars fit and work as expected and I do like the lower profile look over the factor sourced options I see on road

by: Angela09/16/2022

Worked great for our 12 ft kayaks. No issues after 16,000 mile trip with high speeds, adverse weather, and high crosswinds.

by: Bryan11/06/2021

I have a Toyota Prius C and I love how it looks with the Rhino Rack roof rack :D Here in Los Ángeles California I see so many cars with roof rack and I decided to buy one for my car and it looks Beautiful, it gives Style and I can not wait to put my bike and my Surfboard on it :D Thank You etrailer :D

by: Andrew08/03/2022

Seamless installation. The instructions were well thought out and easy to follow. A year after installation the contact points are solid as when first installed. The rack system matches the truck and gives it a great look.

by: JP07/19/2021

Love it, fast shipping, works great and looks awesome on my car!

After a year, the rack is still in very top shape, easy to remove for the winter since I use is only for Kayaks in the summer, easy reinstall. One thing that barely need to be mentioned, some the noise is created on the side tips when driving moderately *cough* *cough*, but it is to be expected since it doesnt serve for aerodynamic :
JP - 07/31/2022

by: Accruzin02/08/2021

Right on kit for the roof racks

its still holding up. put some ceramic coating to keep a new look and protect it from the weather.
Accruzin - 02/19/2022

by: Lisa09/20/2021

Choosing a system for transporting my new (to me, they're actually used) kayaks was TOUGH. I love my little 2017 Honda Fit, and I knew I would love my new kayaks when I got them. I don't want anything bad to happen to either! Also, my car is small and the kayaks are fairly large, comparatively. I've strapped a lot of things to a lot of vehicles, but this is going to be a long term relationship, so I wanted to get it right the first time.

I've been researching and reading reviews for months, but I got confirmation that the kayaks were ready for pickup, so I needed to make a decision! I ultimately pulled the trigger on the Rhino-Rack Vortex Aero Crossbars with the 2500 Series Legs and Custom DK Fit Kit for my naked roof car and the Rhino-Rack Nautic Stack Kayak Carrier w/ Tie-Downs.

I placed my order on 09/15/21 at 6 PM. The estimated delivery date was 09/23/21, which made me a little sad. I really wanted to pick up my boats on Sunday, 09/19/21, but I figured I'd waited THIS long, I could probably handle waiting another week. I was very pleasantly surprised to receive an email at 8 PM the same evening notifying me that my order had shipped. AND, even better, the UPS tracking was showing delivery on 09/18/21 by 7PM! I was beyond excited, but didn't get my hopes up because shipping has been pretty hit or miss since well before the start of the COVID-19 pandemic. However, UPS delivered my package just before noon on Saturday, which was amazing!

I got everything unpacked and reviewed to ensure that I had all I would need to assemble the system - check. Nothing missing, which is always an auspicious start. Then I started reading the instructions - UGH. This is (so far) the ONLY thing I have to complain about. I have put together furniture that had clearer instructions. I probably should have gone to Google to find a [online] video, but I powered through with the instructions provided. Since I've never put together or used a roof rack before, I didn't really know what the final outcome should look like, so that made interpreting the instructions very difficult - the pictures were not super clear, and the accompanying text did not improve the situation. Now that I know what it looks like assembled, I get it, but at the time it was rough. I estimated it took me about 2 hours to get the rack assembled and secured to my car, and towards the end my fiancé arrived and helped me to realize that the foot pads were not properly attached to the feet, which made a huge difference! The kayak carrier was much easier to install, taking maybe 15 additional minutes.

The foot pads rest in the groove on the edge of the roof, I assume over the frame of the car. There's absolutely no flex in the roof where the feet sit. The hook part of the clamp rests against the metal of the car, under the rubber seal, so I don't foresee any potential issues with the seal as a result of the rack. The doors close as normal, and the rack has no movement whatsoever once tightened down. I've now used it as a handle to pull myself up towards the roof a few times (I'm about 190 lbs), and I feel totally confident that it's not going anywhere. I now have ideas about how to use the rack to haul around the larger stuff that won't fit INSIDE my car (which isn't much - I HIGHLY recommend this car!).

So, the big question - how'd it go with the kayaks?

In short - perfection! I was slightly concerned about the boats overhanging the front or back of my car, as they're 12.5 ft long and my car is just over 13 ft long. Eeeeek! I needn't have worried. They fit like a dream, and even without bow or stern tie downs were very secure during our trip home. We took local roads instead of the highway because we didn't tie down the bow and stern, so we probably didn't go over 40 ish MPH, but I saw absolutely no lift (I can see the ends of the boats out of the front windshield). I will be using those tie downs in the future, and anticipate no issues with highway speeds under those conditions.

Obviously, only time will tell how everything holds up/works out, but at this stage, I am extremely pleased with my decision and am looking forward to many kayaking adventures to come! I only have one picture at this point, but may take a few more and add them so anyone else considering a similar setup knows what they'll be getting.

by: Jared05/03/2022

This rack is a great product and has worked great for the kayaks I hauled across the country over the last year. Only things I can complain about is the extra wind noise with them on, and the lack of strap anchors. Otherwise, has worked great for me.

by: Kalani09/10/2022

Product is well an sturdy I would recommend. However for shipping the sent me what looked like a return had measurement pieces cut in half already I took pieces from the other an made it work, shipping was on time. Would be a 5 star if didn't look like the gave me a return one

Thank you for bringing this to our attention. I have already sent your information to our customer service team and they will be in touch with you soon.
-- Etrailer Expert Brooke M - 09/27/2022

by: Holly05/19/2022
Ram 2500

I am very pleassed with our rhino rack serieus 2500 roof rack. It is very sturdy. We also like the idea that it is removeable and very easy to take on and off. We bought 2 sets of Malone J Pro 2 Kayak Carriers from another company that were suppose to fit with the rhino rack but the bolts were too short. Just a warning if you were planning to get those to go with the rhino rack. We were able to contact Malone and they sent us longer bolts so they should fit now.

by: Robert05/30/2022
2018 Ram 2500

I purchased the complete 2500 Series system which included the crossbars, legs and fit kit for my 2018 Honda Fit so I could transport my kayak.. They were well packaged and their quality is quite evident. I did struggle a little following the assembly instructions but with some patience and watching a video it went well. Two items to be aware of. The front and rear leg clamps are of different lengths with the longer clamps going on the rear crossbar. The other issue was positioning the crossbars. After following the measurements for attaching the legs to the crossbars it was quite clear that the measurement for the rear crossbar was wrong. Placing the legs as instructed didn't allow the rear crossbars to be the 29 17/32 inches from the front crossbar but required me to move it back to 31 1/2 inches. There is a very faint whistle while driving around 30 to 35 mph but it's not annoying. I was so pleased with the fit and finish I went ahead and purchased the Rhino Rack S-loader to make it easier for me to lift my kayak onto the crossbars. I would definitely recommend both items.

by: Aaron05/22/2022

The Locking mechanazm is metal but the sides/part is all plastic... if someone wants to snap it off they can easly.

You upgrade to locking end caps that are all metal part # RRVA-LEC4.
-- Etrailer Expert Jenny N - 05/24/2022
You upgrade to locking end caps that are all metal part # RRVA-LEC4
Rhino-Rack Locking Endcaps for Vortex Aero Crossbars - Metal Cores - Qty 4
-- Etrailer Expert Jenny N - 05/24/2022

by: Maureen05/24/2021

This rack has served me well during the past year. Easy to mount and great for kayak racks in the summer snd ski racks in the winter.

Maureen - 05/24/2022

by: Mark08/19/2019's videos and additional customer support made the purchase of a Rhino Rack system from them for our 2010 Malibu a no brainer. The rack fit the car perfectly, and with the videos and clear instructions that came with the kit, I got it installed on the car with only one misstep. The instructions came the the measurements in centimeters and inches. I didn't have a metric tape measure, and ended up messing up converting fractions to decimal.
My Daughter is going to college 500 miles away and is moving into an unfurnished apartment and needed to pick up some small furniture that wouldn't fit in her Malibu. She purchased several items from Facebook Marketplace and was able to transport a twin bed and mattress, a medium sized desk and some dining room chairs (in several trips) with no problems.
The only thing I can think of to improve the installation would be to have the Inches measurements in decimal or to include an inexpensive metric tape.

Still rock solid after a year. Very happy with the Rack. My daughter has used it from time to time over the past year when something wont fit in her car, and shes had no problems with it at all.
Mark - 08/20/2020

by: Dan 03/11/2018

Bought this rack to carry canoe, etc. while towing our camper. Installation is easy with one person so long as you take your time to get the original setup meticulously correct. If you're planning to put it on only occasionally when you're using it, it's 10 to 15 minutes for one person to install once the original setup is done and the clamp points marked with the little unobtrusive stickers they send with the kit. Originally planned to put it on only when using because we only really need it a couple times a year (we just throw the canoe in the back for local trips). Looks good enough we might leave it on all the time. Even thought I didn't know I needed it until I was already at the store, it certainly came in handy bringing home a 10 foot long 2x8 on a rainy day when I needed to keep the bed cover closed. etrailer's service was prompt and flawless as always.

After a year, still works perfectly. No problems with clamp slippage or anything else over time.
Dan - 03/11/2019

by: Edward04/20/2022
Pontiac Trans Sport Van

This rack (including these legs) is the best arrangement for taking our bikes camping with our fifth wheel camper we could have imagined. After trying bike racks on the back of our camper and inside our camper, this rack finally is a safe way to transport our bikes with us. It secures the bikes using the tires and no more damage to bikes. It took a few times to figure out a way to get the bikes on the roof easily. I built a small 15" by 72" temporary platform for the front of the bed to stand on that can be easily slid under the hitch when not in use. WE LOVE THIS RACK.

by: Colby P.03/21/2018
2017 Pontiac Trans Sport Van

The racks fit perfectly! They are a great fit to my car. They don’t interfere with the sunroof’s operation. I assembled it on my own with no difficulty. It was easy to assemble. The directions it provides to you are easy to follow. The only down side was getting the plastic pieces to lock on the ends of the bars. Other than that they are great and they look great on my car! I plan to use them to transport kayaks! They are very sturdy and very trust worthy for transporting a couple of kayaks. I recommend these racks to anyone who has a 2016 or 2017 Nissan Altima!

This rack has been great! I have had no problems with it.
Colby P - 06/03/2019

by: Mark05/08/2022
Ford F-250 Super Duty

I was really looking forward to this rack as I'll be running my roof tent on it. Unfortunately it came damaged, since the damage was limited to the end caps I went ahead and mounted it.
The rack itself looks slick, comes with little measuring sticks to make sure you install it straight the first time, comes with all the tools required.
So thats about it for good stuff.
Wind noise , to give you an idea how bad it is I have this on a old f250 with a bad muffler and 33in mud tires and its still almost intolerable! It's like they put it in a wind tunnel and tuned for as much noise as possible.
I also ordered a roof bag at the same time , I wasn't expecting much from it . It's a bag with a zipper and straps. Sadly the hardware is junk and I snapped a buckle with some light tensioning.
Customer service
Initial service was as good or better than expected. Things went downhill when the damage was reported. I told the rep I was only at a US address for the next 10days and if the replacement was going to take longer than that would they ship it to Canada?
The answer was no, they won't ship it to Canada (talking about a couple pieces of plastic you could stick in the mail for $2.00). They then proceeded to slowplay the authorisation for the replacement parts and shipped them the day I told them was my last day to receive them.
So to sum it all up I am the happy owner of one of the loudest racks on the planet that looks sketchy due to the shipping damage. A roof pack that will probably end up at the dump after one extended trip.
Not likely to be a repeat customer!

Show More Reviews

Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?

  • Rhino Rack Vortex Aero Roof Rack System For Naked Roof Of a 2022 Toyota RAV4 LE
  • Yes, the Rhino-Rack Vortex Aero Crossbars # RRVA126S-2, Rhino-Rack 2500 Series Legs # RRRLKVA and Fit Kit # RR27QP are confirmed to fit your 2022 Toyota RAV4 LE without roof rails. We also have the Crossbars # RRVA126B-2 in black if you feel they look better than silver.
    view full answer...

  • Will the Rhino-Rack Vortex Aero Crossbars # RRVA126S-2 Roof Rack Fit a 2022 Toyota RAV4?
  • Yes! The following parts are definitely a fit for your 2022 Toyota RAV4 LE with a naked roof: - Rhino-Rack 49" Vortex Aero Crossbars # RRVA126S-2 - 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # RR27QP With this roof rack, you receive 165 pounds of maximum weight capacity. As with all roof racks, we advise you to consult with your Toyota owner's manual to make sure your roof can accommodate the weight you wish to transport.
    view full answer...

  • Rhino-Rack Roof Rack Fit on 2022 Subaru Forester Wilderness With Raised Side Rails
  • Yes, there is a Rhino-Rack roof rack that fits your 2022 Subaru Forester Wilderness with raised side rails, and I verified for you that the correct parts for your Subaru are the following: - Rhino-Rack Vortex Aero Crossbars - Silver # RRVA126S-2 or Black # RRVA126B-2 - Rhino-Rack SX Series Legs for Vortex Aero Crossbars # RRSX100 The crossbars and legs are the only parts you need for your Forester for the complete rack, and you made a really nice choice with this system. The reason
    view full answer...

  • Roof Rack For 2022 Subaru Forester Wilderness That Allows Sunroof to Open
  • We do have a roof rack that will fit the raised side rails of your 2022 Subaru Forester Wilderness and allow the sunroof to open without any interference whatsoever; the rack is from Rhino-Rack and made up of the following parts: - Rhino-Rack Vortex Aero Crossbars - Silver # RRVA126S-2 or Black # RRVA126B-2 - Rhino-Rack SX Series Legs # RRSX100 When we test fit this rack on a Forester we found there was about 3 inches of space from the roof to the bottom of the crossbars, which
    view full answer...

  • Roof Rack Fit on 2018 Toyota Highlander Limited Platinum With Bare Roof
  • We have exactly what you need to add a roof rack to your 2018 Toyota Highlander Limited Platinum with a naked roof. The rack that will fit which is the best option for your Highlander is from Rhino-Rack. I really like this rack because it is easily the best value; the quality of the Rhino-Rack roof rack system is the same (or higher) than similar brands, but comes at a better price point. Adding a Rhino-Rack roof rack to your Highlander gives you a durable, quiet roof rack, but without
    view full answer...

  • Rhino-Rack Vortex Aero Crossbars on 2020 Jeep Grand Cherokee Limited 4x4
  • Good choice on the Rhino-Rack Vortex Aero Crossbars. The full-length bars provide plenty of space for carriers and accessories and the vortex strips in C-channels reduce wind noise. Please see the link below for the all needed items for mounting to your 2020 Jeep Grand Cherokee with factory installed rails. This includes the Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 49" Long - Qty 2, # RRVA126S-2. The RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting
    view full answer...

  • Recommended Roof Rack For 2016 Honda CR-V With Factory Flush Mount Rails
  • It sounds like you have the flush mount rails or fixed mounting points in the 2016 Honda CR-V so for that you would want Rhino Rack bars part # RRVA126S-2, fit kit part # RRRCP33-BK and RCL Legs part # RRRCL4 to fit the fixed mounting points. I have attached a photo of what the fixed mounting points look like on a Honda CR-V please let me know if that is not what you have and I can recommend another roof rack for you. I have also attached an installation video for your reference. You could
    view full answer...

  • Which Crossbars Do I Need To Install A Rhino-Rack Batwing Awning On 2020 Hyundai Santa Fe?
  • The Rhino-Rack Batwing awnings just need crossbars that extend past the roof rack legs; there is no minimum overhang according to Rhino-Rack. The Rhino-Rack Vortex Aero Crossbars Silver - 49" # RRVA126S-2 would be just fine for installing a Batwing awning onto your 2020 Hyundai Sante Fe as the crossbars do indeed hang over the legs. After installing the roof rack, you can continue with the installation of a Batwing Awning. Here are your options: -Rhino-Rack Batwing Compact Awning Passenger's
    view full answer...

  • Parts Needed To Install Rhino-Rack Roof Rack System On 2017 Jeep Grand Cherokee With Flush Rails
  • You are correct! You need the Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 49" Long - Qty 2 # RRVA126S-2 along with the RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points - Qty 4 # RRRCL4 but there is one more thing you need and that is the Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs - Fixed Mounting Points # RRRCP27-BK. Depending on what you plan on doing with your new roof rack, here are some suggestions to products I
    view full answer...

  • Dimensions of Top Channel in Rhino Rack Vortex Aero Crossbars, for 2015 Toyota Sienna
  • I was able to go to our test fit bays and use a digital dial caliper to measure the top channel on the Rhino Rack Vortex Aero Crossbars # RRVA126S-2, that with the SX Series Legs # RRSX100 are confirmed to fit your 2015 Toyota Sienna with factory raised side rails. The top T-channel measures 0.25 inches deep x 0.86 inches wide inside the channel. The top of the channel measures 0.43 inches wide. I have attached a diagram showing these measurements for you.
    view full answer...

  • Is 165 lbs The Capacity of Rhino-Rack Roof Rack or of 2015 Chevy Malibu
  • The 165 lb weight limit is the capacity of the Rhino-Rack roof rack that fits your 2015 Chevy Malibu, and not of the vehicle itself. I was also unable to find this capacity, but there's no reason at all Chevy shouldn't be able to tell you this as they manufacture the vehicle so I recommend contacting them again and insisting on an answer one way or another. They may say that the capacity is whatever the roof rack can handle, and I cannot imagine you would have any issues with the weight
    view full answer...

  • Will Rhino-Rack Roof Rack Fit 2018 Toyota 4Runner with Raised Side Rails
  • Based on the stock photo you sent, it sounds like you are looking for a roof rack that will work on a 2018 Toyota 4Runner with raised side rails that run front to back. There is a great option from Rhino-Rack though not using the specific part you asked about. Instead, you will need the following parts: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 (Black) or # RRVA126S-2 (Silver) - Rhino-Rack SX Series Legs # RRSX100 This roof rack uses aerodynamic bars that have rubber vortex
    view full answer...

  • Roof Rack And Cargo Box Recommendations For 2014 Volkswagen Passat
  • The roof rack designed to fit your 2014 Volkswagen Passat has three numbers because some of the components are used in roof rack systems for other vehicles. one or two of the components can be used for several different models. The Rhino Rack system you referenced features the Vortex Aero crossbars part # RRVA126B-2, the 2500 series leg kit, part # RRRLKVA, and the custom pads and clamps, part # DK323. I have attached a link to a product review for this roof rack system you can check
    view full answer...

  • Aero Roof Rack for 2016 Honda Odyssey with Naked Roof
  • For your 2016 Honda Odyssey with bare roof I do have a black aero-type bar roof rack system that I can recommend without hesitation, the Rhino-Rack Vortex Aero system. This rack consists of 49-inch black aero bars that will generate less wind noise than all other shapes, and the rack offers a 165-lb total weight capacity. The complete system consists of parts # RRVA126B-2, # RRQMVA10, # RRRTV168 and # RRRLT600. If you decide you prefer silver bars then you can simply substitute the part
    view full answer...

  • Rhino Rack Cross Bars That Fit A 2021 Toyota Rav4 With Flush Mounted Rails
  • The Rhino-Rack Vortex Aero Crossbars # RRVA126S-2 will work with your 2021 Toyota Rav4, however, you're also going to need: - The Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs # RR42SV. And - The RCH Legs for Rhino-Rack Crossbars and Pioneer Platforms # RRRCH4. These bars measure 49" long, 3-1/8" wide, 1-3/16" tall, and have a maximum weight capacity of 165-lbs.
    view full answer...

  • Roof Rack Recommendation for 2018 Jeep Cherokee with Raised Rails
  • For your 2018 Jeep Cherokee with raised rails the Rhino Rack roof rack part numbers # RRVA126S-2 and # RRSX100 would be a great fit and option. It also will work great with your Rhino Rack snowboard/ski carrier as well. I really like the Rhino Rack roof rack and ski carrier options as you end up with a higher quality setup at a lower price than the similar racks.
    view full answer...

  • Recommended Roof Rack For 2019 Honda Odyssey With Naked Roof
  • In order to mount your Thule Cargo Box on the nakef roof of your 2019 Honda Odyssey you will need a crossbar setup. The best crossbar setup for your vehicle is the Rhino-Rack Vortex Aero Crossbars # RRVA126S-2. This is a 49" long low-profile crossbar with a weight capacity of 165lbs. It has a top channel / track to mount accessories and also has built-in locking endcaps to secure your track-mounted accessories. With this crossbar you will also need Legs # RRRLT600, Leg Spacers # RRQMVA10,
    view full answer...

  • Does Rhino Rack Vortex Rack Fit a 2016 Kia Sorento with Sunroof and Side Rails
  • For your 2017 Kia Sorento the Rhino Rack # RRVA126B-2 and # RRSX023 is a confirmed fit. It will also allow the sunroof to open since the bars will be high enough not to interfere. I pulled up pictures of your vehicle with the sunroof open and it does not stick up hardly at all. You should note that with the roof rack installed there will be quite a bit of wind noise with the sunroof open.
    view full answer...

  • Does Rhino-Rack Square Bar Roof Rack Fit 2018 Toyota Prius With Bare Roof
  • Good question, and the Rhino-Rack does indeed fit your 2018 Toyota Prius with a bare roof, and the parts you would need are the following: - Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # DK467 The Rhino-Rack option is a smart choice for a roof rack because their products are high quality but at a better price point then other name brands, which means you are getting the best overall value for a rack on your Prius.
    view full answer...

  • What Rhino-Rack Vortex Crossbar Roof Rack Setup Fits My 2022 Toyota RAV4 with Naked Roof?
  • We have the parts you need! It looks like you were looking at the Black Rhino-Rack Vortex Aero Crossbars # RRVA126B-2. If this is what you want for your 2022 Toyota RAV4 with a naked roof, you need the following additional parts: - Rhino-Rack 2500 Series Legs # RRRLKVA - Custom DK Fit Kit # RR27QP With this setup, you receive the benefits of an extremely aerodynamic crossbar system that leads to a quieter ride and greater fuel efficiency. The Custom DK Fit Kit secures to your RAV4's
    view full answer...

  • Rhino Rack Roof Rack for a 2017 Ram 3500
  • The Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars item # RRRLKVA are confirmed to fit your 2017 Ram 3500. They will allow you to mount the Rhino-Rack Vortex Aero Crossbars item # RRVA150B-2 on your naked roof. The dynamic weight limit on your Ram 3500's roof is 165 lbs. This is how much weight you can put on the roof of your truck while it is moving.
    view full answer...

  • What Parts do I Need to Install the Rino Rack Vortex on My 2013 Nissan Rogue S with a Naked Roof?
  • In order to install the Rhino-Rack Vortex Aero Roof Rack on your 2013 Nissan Rogue with a naked roof, you will need these parts: # RRVA126B-2, # RRRLKVA, and #DK146 I attached a review of this Rack on a 2013 Nissan Rogue for you.
    view full answer...

  • Best Economically Priced Roof Rack that Fits 2015 Toyota Tacoma Double Cab
  • For your 2015 Toyota Tacoma double cab the Rhino Rack square bar rack part # RRVA137B-2, # RRRLKVA and # DK174 is a really great rack that's a higher quality rack but also great priced. It is our lowest priced option as well.
    view full answer...

  • Installing Rhino Rack Vortex Aero Cross bars for a Hullavator on a 2020 Chevy Colorado
  • You won't cut the item # RRVA150B-2 59" crossbars at all because you need the extra length to use the Hullavator item # TH898. You will need to cut the measuring strips in accordance to the new location the 59" bars will be mounted not the 49" because the cuts will be to far inside the longer legs. It has to extend at least 4" past where your standard bars would for the Hullavator's lift assist function to work properly. I looked at the instructions and there is no 32" measurement. What
    view full answer...

  • Roof Rack Recommendation to Carry Kayak on 2012 Honda Accord Coupe
  • There are a couple of great roof racks for your 2012 Honda Accord coupe, though you will need to use one that mounts to a bare roof as there are not custom installation options. Roof racks that attach to your bare roof mostly use clamps and have rubber pads that protect your car's finish. If you did not want to use a rack that clamps there is an option for you, the SeaSucker Monkey Bars Roof Rack # 298-SX6000B. This rack uses vacuum cups that securely attach them to your Accord's roof
    view full answer...

  • Roof Rack Recommendation for 2016 BMW X3 and Cargo Box That Works With It and Other Vehicles
  • Let's start with the roof rack, and the one your husband will need depends on if the 2016 BMW X3 has a naked roof or if it has rails on the sides that run front to back. For a naked roof, I recommend the Rhino Rack 2500, which consists of the Fit Kit # DK295, Legs # RRRLKVA, and Vortex Aero Crossbars # RRVA126B-2. This rack will clamp onto the roof of the BMW and comes with locks to secure the rack to your roof. The best part of this rack are the aero crossbars, which will dramatically
    view full answer...

  • Does Rhino Rack Roof Rack for 2017 Honda Fit fit Outside of Roof Rail Channel
  • We had the chance to install the Rhino Rack roof rack you have # RRVA118B-2, # RRRLKVA, and # DK438 on a very similar 2016 Honda Fit and we found that the feet fit to the inside of the channel you mentioned. Check out the picture I attached to see this. Also check out the install video that details the entire process and will help you figure out where the measurement discrepancy is coming from.
    view full answer...

  • Can Yakima SkyBox Attach to Top of Rhino Rack Pioneer Platform Cargo Tray with Accessory Bars
  • Yes, the Rhino Rack Pioneer Platform Accessory bars part # RR43120B that you referenced will allow you to install the Yakima SkyBox 12 part # Y07334 that you are interested in! I attached a picture that shows a cargo box attached to these bars for you to check out as well.
    view full answer...

  • Lost Keys For Rhino Rack Roof Rack
  • No big deal. There is a number on the locking core. All you need to do is get replacement keys for that specific number! This set is key number 062 # RRRK062-2. There are a bunch of other numbers on our site to chose from.
    view full answer...

  • Vortex Crossbar Strip Measurements for Rhino-Rack Roof Rack on 2013 Mazda 3 Hatchback
  • It sounds like you are trying to find out the needed strip length for both sides of the Rhino-Rack Vortex Crossbars # RRVA118S-2 on your 2013 Mazda 3 Hatchback, which are used in conjunction with the 2500 Series Legs # RRRLKVA and the Custom DK Fit Kit # DK289. I reached out to my contact at Rhino Rack and she said for your Mazda 3 Hatchback the front crossbar strip length should be 18.1 centimeters and the rear crossbar strip should be 16.8 centimeters. She said that the instructions
    view full answer...

  • Will the Rhino Rack Vortex Aero System Fit a 2018 Honda Fit with Sun Roof
  • Yes, the Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars part # RRRLKVA will fit your 2018 Honda Fit with a sun roof. However, Rhino-Rack does not recommend opening the sun roof with the rack installed. In order to complete your roof rack setup you will also need the Rhino-Rack Vortex Aero Crossbars part # RRVA118B-2 and the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs part # DK438. The above system will provide you with a quality, well made roof rack that has
    view full answer...

  • Rack System for 2006 Honda Ridgeline
  • The Yakima OverHaul HD uprights you referenced will not fit a 2006 Honda Ridgeline, and while there are roof racks that fit your '06 Ridgeline, there are unfortunately no ladder racks that fit this truck. There is a quality option for a roof rack, and I recommend checking out an option from Rhino-Rack because these have the same quality as the name brands like Yakima or Thule while being a more cost-effective option. For a 2006 Ridgeline with a naked roof you will need the Rhino-Rack
    view full answer...

  • Thule Accessories Compatibility with Rhino-Rack Roof Rack Systems
  • Thule square bar accessories will often adapt to work with the Rhino-Rack Aero Bar Crossbars # RRVA118B-2, 2500 Series Legs # RRRLKVA, and Custom DK Fit Kit # DK399 without issue. This roof rack is a confirmed fit for your 2014 Chevy Sonic. If you go to the Aero style bars, I recommend # RRRS615 which is a confirmed fit for your vehicle. Thule accessories have many aero mounts and slot mount hardware for different accessory fits. If you let me know the accessories, I can help if additional
    view full answer...

  • Does Rhino Rack Fit Kit for 2007 Acura TL Have Replacement Pads
  • I can certainly understand wanting to use everything you have, but the pads themselves are not available as replacements from Rhino-Rack, so you will need to get the entire fit kit, which you correctly identified as Custom DK Fit Kit # DK067. The good is, I can confirm that all the parts you currently have and mentioned will work on your 2007 Acura TL, the Rhino-Rack Vortex Aero Crossbars # RRVA126S-2 and Rhino-Rack 2500 Series Legs # RRRLKVA. So you do only need the Fit Kit and you
    view full answer...

Rhino Rack Accessories

Fit to this rack on your 2004 Acura TL

Info for these parts were:

Employee Tyler C
Written by:
Tyler C
Employee DeAnne T
Updated by:
DeAnne T
Employee Wilson B
Updated by:
Wilson B
Employee Daron K
Updated by:
Daron K
Employee Alex H
Updated by:
Alex H
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video by:
Chris R
Employee David F
Test Fit:
David F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Acura TL Accessories