Part Numbers: SB324-081,C31023
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.
Features:
Specs:
Note: Due to the size of this item it ships via truck freight.
This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31023 Curt Front Mount Trailer Hitch Receiver
Average Customer Rating: 4.9 out of 5 stars (83 Customer Reviews)
Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Delivery was super fast, instructions and instructional video was excellent. Installed my new part in less than 40 minutes
Install went perfectly. It all bolted up just how the instructions said it would. The hardest part was navigating your tools in the tight spaces. Having the deep sockets as suggested is definitely worth it. I was also able to utilize a cordless impact wrench and it helped a ton. This will work great for our bike rack.
Great front receiver hitch for my Chevy Silverado 2500 HD. Everything fit using OE bolts and nuts. Only the plastic trim had to be cut out to fit receiver. I had dealer do it, but would have done it myself when I was younger. etrailer is easy to order from and has good customer service.
This thing went on our 2013 Silverado 1ton truck without a problem. It did take two of us to hold it in
Place to get the first bolt back in but other than that it’s been flawless
Great product! Super easy to install! This makes my winch twice as versatile. Thanks for a design that leaves the tow hooks in the truck!
Overall, my experience with etrailer was good. There was an initial delay in shipping, but once I talked to someone, everything went well. The help page was invaluable. The biggest help was the installation video. While there are slight differences between the 2011 GMC and the 2013, the process was the same. I am very pleased with the product and the support. Picture attached.
Richard B.
7/8/2014
After a year, I am still extremely pleased with the hitch. It is solid and provides the solution I needed.
Better than a snowblower!! Made very well, had it put together and mounted in a couple hours. Used it for two small snowfalls and it worked as expected. Great customer service from etrailer!
Perfect fit for my 2012 GMC 3500. Directions are excellent. It is a tight work space for some of the bolts. I've carried a bike rack with 130 lbs of ebikes for 600 miles so far and no problems.
Great product...I carry bicycles on the front of truck while towing a camper. Can also carry a cargo basket or winch on the front. Love it!
Mitch E.
1/15/2021
Best thing for carrying bikes on front of truck!
Excellent fit & function delivered in a reasonable amount of time. Although this shot is at our current campground in NJ, the hitch will be used to park my boat in its hard-to-get-to parking spot. Great job, Etrailer!
Tomw2034
1/23/2018
The hitch has worked out just fine for a variety of uses. I have always been impressed by all the _towing_ related articles purchased from etrailer.
Great product, easy to install. Had to cut the air-dam but no other alterations needed. It is a little low but no more so than the front of the truck air dam.
Owen W.
5/2/2018
I use a motorcycle carrier on the front for my 125 scooter while pulling my fifth wheel. It is very secure and the finish has held up fine. I would recommend this purchase.
Installed this hitch this morning 10/06/19. Was going to wait for help as arthritis in hands makes turn wrenches a chore but was bored so went ahead anyhow. This is my second front hitch install , first one on 2018 F-150. Today’s install on 2014 duramax 2500. Today’s install was super simple , used floor jack to hold hitch up in position, you need to remove four bolts on each side , I did try air tools on the 21mm bolts but not powerful enough so used small piece of copper pipe over wrench handle for leverage to loosen, air tools were able to loosen the six 18mm bolts , took me about an hour and a half by myself. The fit of the hitch was absolutely perfect! Had to cut a small piece of the air dam at bottom of bumper, used a hacksaw, very easy. The quality and coating on the hitch is top notch.
I watched the attachment on how to install and video was spot on. The hitch is very well made. I'll enjoy this for years to come. Thank you
I bought a Snow bear personal plow and a separate Curt receiver hitch for the front of my 2012 F250.. after speaking with Erica W. several times due to blunders on my part, all was perfect. Quick delivery, price was right, items are super rugged. The stock photos don't do justice. My plow came in at 350 pounds without the receiver hitch. It's not a cheap toy plow. Get one, they'll fit nearly anything! Thanks Erica!!
As always, delivery was quick. Hitch was easy to install and works nice. We do a lot of camping and since very few of the travel trailer manufacturers recommend a trailer hitch (some will tell you it voids your warranty), we can carry our bikes up front with this hitch.
Gerard B.
4/14/2018
Excellent! As with every product i have purchased thru etrailer.
Great product. Easy install.
Super easy, DIY!!! Best price around, delivered in 2 days for free! Would definitely look at etrailer again for any camping/ hauling / trailer needs !
Fit and finish is great and installation was fairly simple with the right tools.
I ordered a front hitch mount for our RV. Product is very heavy duty and priced right! I ordered on a Friday afternoon and had my part by Tuesday, very impressed. Will surely use this company in the future.
C.
9/25/2021
The hitch mount has worked great. Knowing it was machined for pick up trucks, I had no problem installing on a Freightliner chassis. Had to drill a few holes and fabricated a additional brace out of some angle iron for added piece of mind. I have no concerns about the sturdiness and integrity when using this mount.
Installed on my 2012 Silverado 2500HD and it fit perfectly and was very easy to install. Cut my lower cowling to allow the hitch to protrude and it looks awesome! Very glad I purchased your product and would highly recommend to everyone!!
Ed C.
8/6/2020
Still Rocking!I have used this many times and it is still a great product!
very sturdy product; installation was straight forward exactly as instructions indicated. I had planned to haul motorcycle on this front mount hitch with a carrier meant for a rear receive hitch. While i have not done so yet (lighting issues i need to resolve), this receiver will do the job. I also plan on picking up a receiver mount for a winch which could come in handy. Shipping was fast from etrailer. Overall great product and great service! I got just what I expected from the description.
It was pretty easy to put on it would have been a lot easier if it was not bent on one end when I received it but there is nothing we can't fix around here
Exact fit. Took less than 30 minutes to install in my shop and used all of the factory attaching hardware. If your truck is equipped with the second lower plastic deflector, approximately 3" long, you'll need to trim a 2 3/4" square out dead center for the tube to clear. I've installed several RV accessories over the years and I want to thank you for taking the time to get the fit correct. Time is money and your product is spot on. I would recommend this to anyone looking to install a hitch to the front of their truck for a bike rack or to make moving a trailer around in a crowded yard a breeze.
Perfect fit on my 2014 Sierra 2500HD Denali. Removed the air dam and it bolted right up. I use it for a front rack to haul a canoe with my 5th wheel camper and it suits my purposes perfectly. You do lose some front approach angle with the receiver hanging down up front, but if you don't do a lot of off road travel you wouldn't notice any difference.
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bill M.
3/15/2022
Love it. It is secure and discrete and is great for a bike rack. Be cautious of what you hang up front, bikes or other types of racks might disrupt airflow into the radiator, which was expected, just keep an eye on temperature. The bolt up was secure and relatively easy.