Part Numbers: SB324-172,C31008
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.
Features:
Specs:
Note: Due to the size of this item it ships via truck freight.
The SnowBear Proshovel conveniently slides into your vehicle's front-mounted trailer hitch for easy, convenient mounting. Smoothly and easily raise and lower the plow from the comfort of your cab with the remote-controlled electric actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping. Being just 39" away from the bumper, the Proshovel snowplow has a compact yet strong and sturdy design.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the Proshovel snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, 11 degrees to the left or to the right, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Proshovel.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Smooth, Controlled Lifting with Electric Actuator
The electric actuator on this plow allows you to lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. To raise the plow, activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. Having fewer moving parts than a typical winch makes this setup less complicated and less likely to break down than other plow lifting and lowering devices. There is also an internal clutch system that prevents damage to the actuator should you try to raise the blade too high or lower it too low.
Add-On Accessories
SnowBear offers a plethora of helpful accessories to make plowing even safer and easier. Along with the available accessories to enhance your snowplowing experience, many parts of the SnowBear Proshovel snowplow are available separately, so you can replace worn-out pieces without having to replace the whole plow.
The off-road halogen light kit (SB324-127) may be necessary if your plow blocks your vehicle's headlights. This kit will light up the way when you're plowing at night or in the early morning. The light kit mounts directly to your plow frame and offers increased visibility when plowing in dark conditions. The 2 bright halogen lights make it easier for you to see where you are going and for others to see you.
With the caster kit (SB324-126), it will be a breeze to move and store the Proshovel snowplow when it's not in use. These wheels mount directly behind the blade and they can be easily folded down for use and up for storage. In addition, these wheels will not weigh the plow down.
The drop extension kit (SB324-128) allows you to use your SnowBear snowplow on your lifted vehicle. With 6" of drop, this bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.
If you are worried about causing damage to your lawn or pathway, the poly scraper attachment (SB324-069) is perfect for replacing the harsh, steel scraper on the Proshovel. The polymer construction is strong enough to still help plow efficiently, but gentle enough to not hurt your lawn or pathway.
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.9 out of 5 stars (38 Customer Reviews)
Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Overall it's a good light duty plow, works like it's supposed to, clears the snow with no problems. Originally purchased the plow with the hitch receiver mount, But the plow stuck out quite a bit in my opinion plus there was to much wobble. So I converted to the 2 point mount which brought the plow in closer and a lot less wobble.
There was an issue with the actuator, it would work intermittently when lowering the plow but Snow Bear covered it under warranty and sent me a new one.
My only gripe is that only after 3 months of Winter use, the whole plow was showing a lot of surface rust and the paint was peeling.
Overall it is a good setup, does the job it's suppose to. Had one problem with the actuator intermittently working when lowering the plow, but was replaced under warranty.
Originally purchased to use in a front mounted hitch receiver, but switched to the two point hookup which brought the plow in closer to the vehicle and made it a little more stable.
My only problem was after 3 months of winter use, paint was peeling and a lot of surface rust showing.
Works good with my snow plows.
I just had a chance to finally get it mounted to my truck. The fit is perfect. I have never had any issues with anything that I’ve ever gotten from etrailer.
This is the second front hitch I have purchased from etrailer. As with the first, this was a well built, solid product. It fit my older 2009 Ford Super Duty perfectly. The only thing that was incorrect was in the instructions it called out the tools needed. But the actual sockets needed were larger than called for. Not a big deal, but something to correct moving forward. I mounted the hitch myself in about 45 minutes. Most of that time was getting set up and going looking for the larger sockets. I used a roll around jack, as I did with the first hitch, to lift it into place and be able to move it around. Works well. Everything was A+. Sorry I have no pictures. But it looks great.
Solid build, perfect fit, nice function ality.
Bolted right on our F450SD with out having to remove anything.
Cruising J.
12/8/2021
Great
This is the second "Curt" front hitch that I have purchased. I have not had the opportunity to mount it yet, but the instructions appear to be complete and easy to follow. It arrived UPS ground in about 5 days.
Daveh
1/22/2016
Installation was easy, even for 70yr old bod! Works great, bought it to mount a winch, have also used it to move trailers around the yard.
This is the 3rd hitch I have ordered from etrailer.com. First one was for my second daughter's new 2022 Honda, 2nd one was for my 2018 Subaru Forester and this one is for for my 3rd daughter's Ford F-350 Super Duty. etrailer.com has what I need, fast and easy to order, delivered to my front door and it fits every time. -Wally-
Fast delivery. Fits perfect. Great comp any.
Heavy Duty and well made. Fairly difficult install because of such tight clearances on the trucks frame members, but I installed it myself in about an hour.
The Curt receiver hitch is good quality but if your doing the install yourself from the driveway or garage floor, two floor jacks would be very helpful as the receiver hitch needs to be "snaked" in around the truck structure. The front receiver hitch will give us options for carrying various types of hitch attachments. Thanks e-trailer.
Ended up using this front receiver way more than I initially expected. Now it’s possible to one person back up my boat into garage...safely. Very easy to install and seems to be high quality. No complaints.
Flanagan
11/11/2020
Still working great. Not sure if it is in the description, but this hitch fits chassis cabs trucks, e.g. my truck is a F450 Chassis Cab.
Fit just right, it would be nice if there was a wider version that allowed me to keep my front axle protectors on. Doesn't stick out ridiculously far, leaving just enough room in front of the air damper for the pin hole.
the Curt front receiver for the 2010 F-250 is an exact fit- and it arrived in good time. I got the Curt rear receiver from etrailer a couple of years ago and it has worked well.
Now I can carry on both front and back. The video provided was a great help.
On my F-250 4x4 the installation went smoother than expected, working on my back with the truck sitting on the floor. The front end of the frame rails is up inside the bumper assembly, so it's rather tight space to work in, but the entire job took only about an hour. I did NOT have to trim the air dam.
The carrier slid right into place using a floor jack, and it was easy to align the front bolts. Once they were in place the floor jack could be removed. Fishing the rear bolts is a little tricky, but it went surprisingly well once I straightened-out the coiled fish-wire (leaving the bend about 2" from the end, which pops through the hole once it reaches it). To prevent losing the bolts inside the frame I pulled just a portion of the bolt-coils off the bolts' threads and got the nuts started before pulling-off the rest. This results in stretching-out and ruining the bolt-coils on the fish-wires. Curt anticipated this, however, and provided one for each side. That kind of thoughtfulness (and the slight extra cost of providing the second fish-wire) is what distinguishes excellence from merely good-enough.
Perfect fit on our 2008 f350. Installation took less than an hour with two people. As usual good shopping experience with etrailer.
Jay
7/10/2021
After a year the hitch has been very useful in unanticipated ways. Attaching a cargo rack nc we have a kayak rack attached to rear hitch. Hitch still looks new and no rust after first winter. Recommend product and etrailer.com.
Good hitch for the price, I use it for a front cargo carrier for surf fishing, but I'm confident I could pull stuff with it. This fits my 2008 F350. Install wasn't too bad but this thing is heavy, easier with two people.
fairly easy to install but 2 people suggested
very sturdy
If you install a load basket in the receiver, be sure to attach something that helps you remember its there so you dont bump the car in front of you. I used a fiberglass rod I could see from the cab
I was very impressed about the quality and fitment of this product. The price was excellent, the shipping time was excellent, and the condition of the product received was also excellent. Of course it said it would take 20 minutes to install, but the reality was more like an hour taking my time and not wanting to damage anything. But still, under an hour was good. Everything went as planned out in the instructions. Overall, I am very please with the product and how it looks on my truck. Keep up the great products you sell!
Installing this is a two person job, a little difficult by yourself. Other then that it is made of good quality and heavy duty.
Received product on time and installed in about 2 hours. Thanks Etrailer.
Fast shipping! This receiver is fully welded and very heavy! I’m impressed with the thick wall square tubing.
Steve
1/6/2024
Use the hitch constantly for both winching and moving stuff around the place...great performance after a year of trying to break it!
Fight like a glove
Dennis H.
11/10/2019
Use it for my Myers snow plow. Works great
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ford F-250 Super Duty Accessories
Stephen
6/16/2021
Works great. Used many times with moving trailers and a stump grinder. Much easier to line up when pushing the item in front. Also mounted carrier to mount garden sprayer and drove the fence line inside my AC truck instead of on an ATV or lawn tractor.