bing tracking image

SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Part Numbers: SB324-172,C31071

Our Price: $3,102.50
Snow Plow
This item qualifies for Free Truck Freight Shipping

In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me



SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall
part number: SB324-172

Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab.

Features:

  • Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
  • Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
  • Electric actuator raises and lowers plow smoothly and consistently
    • Internal clutch prevents damage caused by attempting to under- or overextend the actuator
    • Simple, chain-lifting design has fewer moving parts than a winch
  • In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
    • Includes a wireless remote control as an alternative to the toggle switch
  • Adjustable, 5-position blade can be manually angled left, right, and straight ahead
    • Manual release handle is easily accessible from front or back of plow
  • Terrain-adjustable design for efficient plowing with less tripping
    • Rocking blade pivots up to 6" to allow maneuvering over uneven terrain
    • Trip springs and eyebolts are angled so blade rests on ground at correct angle
  • Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
    • Poly scraper blade attachment (SB324-069 - sold separately) allows you to plow over grass or decorative pavement without worry of damage
  • Skid shoes let you adjust plow height to prevent blade from digging into the ground
  • Strong rubber deflector allows for better visibility by directing snow away from your windshield
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Rugged and durable, all-steel construction
  • Black powder coat finish provides corrosion resistance
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver
  • ISO certification ensures consistent, quality manufacturing
  • Assembly required
  • Made in Canada


Specs:

  • Application: 2" x 2" front-mounted trailer hitch receiver
  • Blade dimensions: 84" wide x 22" tall
  • Height adjustment: 9"
  • 5 Blade angles:
    • Left 11 degrees
    • Left 22 degrees
    • Straight ahead
    • Right 11 degrees
    • Right 22 degrees
  • Distance from bumper: 39"
  • Actuator lift capacity: 1,000 lbs
  • Weight: 380 lbs
  • 1-Year limited warranty


Note: Due to the size of this item it ships via truck freight.


The SnowBear Proshovel conveniently slides into your vehicle's front-mounted trailer hitch for easy, convenient mounting. Smoothly and easily raise and lower the plow from the comfort of your cab with the remote-controlled electric actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping. Being just 39" away from the bumper, the Proshovel snowplow has a compact yet strong and sturdy design.


Simple, Hitch-Mounted Installation

HITCH MOUNTING

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


To install the Proshovel snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, 11 degrees to the left or to the right, or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Proshovel.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Smooth, Controlled Lifting with Electric Actuator

ACTUATOR

The electric actuator on this plow allows you to lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. To raise the plow, activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. Having fewer moving parts than a typical winch makes this setup less complicated and less likely to break down than other plow lifting and lowering devices. There is also an internal clutch system that prevents damage to the actuator should you try to raise the blade too high or lower it too low.


Add-On Accessories

SnowBear offers a plethora of helpful accessories to make plowing even safer and easier. Along with the available accessories to enhance your snowplowing experience, many parts of the SnowBear Proshovel snowplow are available separately, so you can replace worn-out pieces without having to replace the whole plow.


LIGHT KIT

The off-road halogen light kit (SB324-127) may be necessary if your plow blocks your vehicle's headlights. This kit will light up the way when you're plowing at night or in the early morning. The light kit mounts directly to your plow frame and offers increased visibility when plowing in dark conditions. The 2 bright halogen lights make it easier for you to see where you are going and for others to see you.


CASTER KIT

With the caster kit (SB324-126), it will be a breeze to move and store the Proshovel snowplow when it's not in use. These wheels mount directly behind the blade and they can be easily folded down for use and up for storage. In addition, these wheels will not weigh the plow down.


DROP KIT

The drop extension kit (SB324-128) allows you to use your SnowBear snowplow on your lifted vehicle. With 6" of drop, this bolt-on kit ensures that the plow makes proper contact with the ground. Its sturdy steel construction is just as strong and durable as the plow itself.


POLYBLADE

If you are worried about causing damage to your lawn or pathway, the poly scraper attachment (SB324-069) is perfect for replacing the harsh, steel scraper on the Proshovel. The polymer construction is strong enough to still help plow efficiently, but gentle enough to not hurt your lawn or pathway.



324-172 Snow Bear Pro Shovel Snow Plow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall



Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31071

Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

  • Front-mount hitch provides attachment point for hitch-mounted accessories
    • Winch, spare tire carrier, snowplow, cargo carrier and more
    • No more blindly backing trailer in - just hook it up and drive it forward
  • Custom fit is designed specifically for your vehicle
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over steel resists corrosion
  • Sturdy, square-tube design
  • Assembled in the USA


Specs:

  • Line pull: 9,000 lbs
  • Vertical load: 500 lbs
  • Gross trailer weight: 5,000 lbs
  • Receiver opening: 2" x 2"
  • Pin hole diameter: 5/8"
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



31071 Curt Front-Mount Trailer Hitch Receiver

Item # C31071





Customer Reviews

SnowBear Proshovel Snowplow for 2" Hitches - Electric Actuator - 84" Wide x 22" Tall - SB324-172

Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31071

Average Customer Rating:  4.8 out of 5 stars   (110 Customer Reviews)

Hitch-mounted snowplow makes short work of your snowy driveway or parking lot. Pivoting, 5-position blade glides over uneven ground. Long-lasting actuator with internal clutch lets you operate plow from your warm cab. Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

by: Christopher04/20/2022

The hitch was well-made, and installing it was very easy. However, the design of the hitch is somewhat perplexing. The hitch receiver hangs about 3 inches lower than it needs to, which reduces the ground clearance on the front of the truck significantly. See attached photos. The hitch will work until I find something better, That restores the front ground clearance

Christopher

4/21/2023

Great, except for the reduced front clearance as indicated in my review



by: Bob05/25/2022
2019 Chevrolet Silverado 3500

Well so far so good. It was a little difficult trying to do it by myself, got most of it done and then had to go to a autobody shop down the road to tighten up the 4 bolts.

Bob

5/26/2023

It worked out great! We traveled to Key West from New England with only a couple of problems. Watch out for dips in the road, curbstones, large tree roots.



by: Mark12/27/2018

Overall it's a good light duty plow, works like it's supposed to, clears the snow with no problems. Originally purchased the plow with the hitch receiver mount, But the plow stuck out quite a bit in my opinion plus there was to much wobble. So I converted to the 2 point mount which brought the plow in closer and a lot less wobble.
There was an issue with the actuator, it would work intermittently when lowering the plow but Snow Bear covered it under warranty and sent me a new one.
My only gripe is that only after 3 months of Winter use, the whole plow was showing a lot of surface rust and the paint was peeling.



by: Fernando Zapata11/29/2023

The hitch is mounted on our 2018 GMC 2500hd. We use it to transport our bikes. We choose not to mount items on our tv rear bumper.



by: John02/24/2019
2016 Chevrolet Silverado 2500

This front hitch carrier has been a life saver for us. I reviewed all the bike mounting options I could find for our truck camper and decided that mounting the bikes on a front receiver hitch was the way to go. The customer service at the front end was excellent. I needed to be sure that the position of the hitch receiver would allow a) enough ground clearance, b) that the bikes would not be touching the front grill of the truck, c) that the bikes would not be sitting up so high that the view of the driver would be obstructed and d) that I would actually be able to do the install myself. Well, the customer service gal on the phone was very helpful and took a lot of time to research and answer all my questions and I felt confident that I was getting the right item. I was able to install the receiver in less than 2 hours with the help of my neighbor. The instructions were clear and the install went fairly smoothly. The end result is an excellent product that is very strong and durable and holds our bike rack perfectly. We have logged over 5000 miles since installing it last spring and I could not be happier with how things have worked out!



by: Mark01/02/2019

Overall it is a good setup, does the job it's suppose to. Had one problem with the actuator intermittently working when lowering the plow, but was replaced under warranty.
Originally purchased to use in a front mounted hitch receiver, but switched to the two point hookup which brought the plow in closer to the vehicle and made it a little more stable.
My only problem was after 3 months of winter use, paint was peeling and a lot of surface rust showing.



by: Peter08/18/2018
2017 GMC Sierra 3500

Had the front hitch in use for about a year. No issues...supports a front "cooler" rack that I modified and added a bike roack to the front of that...it performs the way it should....easy install...great produt...happy all around



by: James 10/05/2022
2017 GMC Sierra 2500

Hitch fit perfect on my truck and the video was on point for installation. I had the hitch installed in 45 minutes and it looks great.

James

10/6/2023

Product works as described, I use it for my winch and use with my fishing rack on the beach.

Etrailer Expert

Mike L.

10/19/2023

@James Awesome, we're glad to hear that your # C31071 Curt hitch is doing the job for you!


by: Craig03/07/2021

High quality hitch. Great install instructions. Not hard to install but you will need two people. May be possible with one person with truck on a lift.



by: Ian09/19/2023
2018 Chevrolet Silverado 2500

Very easy front reciever install, I was able to do it by myself with a hydralic floor jack. And no bumper modifications needed



by: David 08/13/2022

It took me a little more than an hour to install the mount. It was a little tight but I used a come a long to pull it into alignment.

David

8/14/2023

Works great, fit well, easy to install, and allows me to place my ev-bikes in the front of the truck when traveling.



by: J. Michael05/01/2024
2015 GMC Sierra 3500

Came a day early now to install looks good can't wait to see how it fits



by: Tracy05/03/2018
2016 GMC Sierra 3500

I really like the front hitch. I use it to haul kayaks when I'm towing my fifth wheel.
My only complaint is that it significantly decreases my front end clearance. I now tend to hit ground while going through dips.
Other than that, it's been great.



by: Calvin P.01/02/2015
2015 Chevrolet Silverado 3500

The Curt Front Mount Hitch is a great addition to any working man's truck. The fit is so tight that I had to bend the side frame tabs out a little bit to get it mounted. Once in place it mounted exactly as described.



by: Tahoe Kevin01/24/2019
2018 Ford Transit Connect

Installed on a 2018 Chevy 3500HD (diesel)

Product
arrived as scheduled in a shipping box that was damaged in transit. Upon inspection of the contents, it was determined everything was fine and all installation parts were securely attached to the hitch. It's understandable that a cardboard box with a 35 pound steel frame will get some damage in handling.

Installation: Absolutely watch the video online, it is extremely helpful! I jacked up the front of my truck about 6 inches and set jack stands in place on the jacking blocks behind front wheel wells. I also removed the plastic debris guard (4-15mm bolts) for easier access to the mounting points. I must say, the threaded pull wires are a wonderful addition that made the installation flawless! Take your time and follow the enclosed instructions (and video) and it should take you about 30-45 minutes. I am an average mechanic at best and this was a really easy install!

Be aware that adding the hitch up front will require you be careful with parking curbs, however I think the hitch is stout enough to insure it will destroy a concrete curb. Probably best to avoid testing that theory.

I test mounted a motorcycle carrier on the from of the truck and loaded up a KTM 690 Duke. (315 lbs) Virtually no sag in the front suspension and to bike should ride well with proper pads & tie-downs. Makes for an interesting hood ornament ;)

All in all, a great product and vendor. You can buy with confidence.

Tahoe K.

1/25/2020

Stout Hitch



by: Ryan 05/24/2020
2015 Ram 3500

Overall quality looking hitch. The side-flanges were not wide enough to fit around my ‘16 Sierra 3500 frame which was extremely difficult to install, especially with the fish-wire. Had to use a floor jack to push the hitch into place and remove the skid plate and thankfully there was an access hole in the frame where the flange-bolt goes. Did not want to cut a hole behind the license plate so this was the only option and would buy again if needed but the flanges should be 1/16th to an 1/8 of an inch wider.

Ryan

5/25/2021

Had to remove, to low to the ground and kept hitting everything.

Sierra K.

5/27/2021

Thank you for your review. On a 3500 Sierra the top of the receiver tube opening to level ground should be 9 3/ 4".


by: Chuck03/11/2022

etrailer needs to package their hitches better... I have received 2 of them and both boxes they were shipped in were just about destroyed! They were full of holes and tape covering up holes! Please package them better!!

Etrailer Expert

Jenny N.

3/22/2022

I will have our Customer Service team reach out to you.



by: Steve 05/31/2023

Shipping box was trashed, all attaching parts were very well protected and nothing was lost. Installation was exactly as the video explained with no issues. Haven't used it yet.



by: Scott 06/01/2023

Have not opened the box yet, but am hoping for a perfect fit. Excellent communication on my order and delivery status…5-Star rating on customer service



by: Bob S.12/01/2014
2015 Chevrolet Silverado 3500

Very well built, relatively easy to ins tall.



by: Dave T.01/02/2019
2018 Ram 2500

I searched far and wide for a front hitch for my 2018 GMC 2500 HD Denali, most will not fit the Denali for some reason. This one did so with no trimming of the air dam, it's a perfect fit and only took about 45 minutes to install by myself. This will be the second truck I've owned with a front hitch and it seems like a necessity at this point, they're great for bicycle racks, winches, kayak racks, you name it!



by: Ronald T06/03/2022

Mounted the hitch yesterday. Trying to get time to assemble the balance. And I retired???? Oh, golf today.

Ronald T.

6/4/2023

Works great. I have used it twice to take my Kayak to the Sierras. Works well with my truck while pulling a Grand Design 5th wheel



by: D Scott W09/14/2015
2015 GMC Sierra

The Curt hitch assembly arrived in excellent condition. As usual, George did a fantastic job of getting my order to me very promptly. The installation went perfectly and exactly as shown in the video on the etrailer.com website. The front hitch fit was perfect on my 2015 GMC Sierra.

D W.

9/13/2016

Ive driven thousands of miles with my bicycle rack attached to the Curt front receiver. The Curt front receiver has performed perfectly. The best thing is I didnt have to cut or alter my truck to install it.



by: Tom D06/21/2019

We added this hitch to the front of our GMC Sierra 1 ton and carry 2 ruckus motorcycles with us camping. This is a 500 lb. load upfront and carries wonderfully. It does hang low under the front bumper, so you will hit the curb if you park straight in. It will also hit a steep driveway. A lift kit for the truck is a possible cure but we carry a large camper and would be top heavy. We would buy this product again in a heartbeat as it is well constructed and easy to install in minutes.

Tom D.

6/24/2020

Still love it, but rough roads are a no go without lifting our truck. There are many asphalt marks from Jasper to Yellowstone.



by: Stevethetreeman03/12/2023

Received order a couple days earlier than expected which was great. Quality looking product and installation looks well thought out. Completely satisfied but will update after I install. If necessary.


25
110
Show More Reviews

Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?


  • Will SnowBear Proshovel Snowplow Work on 22 inch Tall Front Hitch
  • Actually SnowBear does not list a max height range for their snow plows like the part # SB324-172 that you referenced. A 22 inch hitch height like what you have would not be a problem at all for this plow!
    view full answer...

  • Plow Recommendation for 2003 Chevy Silverado with Front Hitch for Plowing Gravel Driveway
  • For a plow that is confirmed to fit the front hitch of your 2003 Chevy Silverado 2500HD I recommend the SnowBear Proshovel Snowplow # SB324-172. It measures 84 inches wide by 22 inches tall which means it will take a wide section of snow with each pass and is a taller size which allows for a better plowing angle. This also comes with skid shoes that you can adjust so that you can plow gravel well. Since plowing gravel can be challenging to do without scooping up gravel you will need to
    view full answer...

  • Front Hitch for 2012 Ram 2500 for Use with SnowBear Proshovel
  • Snow plows that attach to the vehicle by a front hitch like the SnowBear Proshovel # SB324-172 need to have the hitch opening lower than the hitches that fit through the front bumper of your 2012 Ram 2500 like the Draw Tite # 65063 that you mentioned. You'd instead want a lower hanging front hitch with the # 65057.
    view full answer...

  • Front Hitch Receivers Available for 2015 GMC Sierra 3500 Denali
  • The one front-mount hitch available for your 2015 GMC Sierra 3500 Denali is the Curt model # C31071. This offers no-drill installation and the linked video will show you the process and final appearance. There is a Draw-Tite hitch offered # 65078 but this is not a fit for the Denali. If you plan to use a heavy front-mount accessory such as a plow or cargo carrier you might consider a front-axle suspension kit like a set of rubber jounce springs such as # SSF-202-47. This no-drill
    view full answer...

  • Installing Curt Front Mount Trailer Hitch Receiver on 2017 GMC Sierra 3500 Denali
  • The Curt Front Mount Trailer Hitch Receiver # C31071 referenced in your question is confirmed to fit your 2017 GMC Sierra 3500 Denali. The hitch will use existing holes in the truck's frame to eliminate the need for any frame drilling during installation. The installation also does not require any modification to the front airdam and Curt estimates an installation time of just around 50 minutes (or 25 minutes for a professional). I have attached the complete installation instructions
    view full answer...

  • Does the Curt Front Hitch C31071 Fit a 2019 Chevy Silverado 2500 Diesel?
  • Yes, it does. I checked with Curt and the Curt Front Mount Trailer Hitch item # C31071 does fit the 2019 Chevy Silverado 2500 diesel trucks. This front hitch is custom fit and bolts to your truck with included hardware. I have linked an installation video below to help you get it set up.
    view full answer...

  • Front Mount Trailer Hitch Receiver for a 2015 GMC Sierra 2500 SLE that Does Not Require Trimming
  • You should not have to trim the front fascia on your 2015 GMC Sierra 2500 SLE to install the Curt front mount receiver # C31071. I have included a link to the installation instructions that do not mention any trimming required. I have also included a link to a video showing the receiver being installed on a 2015 3500 series and you can see no trimming is required.
    view full answer...

  • Will Curt Hitch # C31071 Fit 2016 GMC Sierra 2500 Denali
  • I spoke with my contact over at Curt and he said that front mount receiver # C31071 will fit your 2016 GMC Sierra 2500 Denali. The air dam may need to be trimmed for the hitch to fit.
    view full answer...

  • Wiring for Electric Winch at the Front and Rear of a 2015 Chevy Silverado 3500 Duramax
  • First, you are going to need a couple sets of quick disconnects such as # BDW20133. You will need enough 2 to 4 gauge wire to reach from the front of the truck to the batteries and from the rear of the truck to the batteries. Another option is to get a couple of winch wiring kits, # BDW20207. The winch power and ground wires will attach to one disconnect and the wiring to the batteries will attach to the mating quick disconnect. Diesel trucks normally have 2 batteries so the isolator
    view full answer...

  • Front Mount Hitch Receiver for a 2015 GMC Sierra 2500 Denali
  • I spoke with my contact over at Curt and he said that front mount receiver # C31071 will fit your 2015 GMC Sierra 2500 Denali. The air dam may need to be trimmed for the hitch to fit. We haven't had anyone complain about the ground clearance but the receiver will be under the front fascia so it is possible that it could make contact with the ground at severe enough inclines. The Draw-Tite hitch, # 65068, will not fit because the receiver is mounted higher up on the cross member compared
    view full answer...

  • Solution for Front Mount Hitch Hitting Pavement on 2015 GMC Sierra 3500
  • We do have a couple front-mount trailer hitches available that are confirmed to fit your sister's 2015 GMC Sierra 3500. When we installed the Curt Front Mount Hitch # C31071 on this model Sierra, which is the model I recommend, we measured a distance of 9-3/4 inches from the ground to the top of the receiver. I am not sure how this compares to the hitch currently installed on the truck, but you can take a quick measurement to see if it will provide a positive change in ground clearance.
    view full answer...

  • Curt Front Hitch for a 2016 Chevy Silverado 2500HD
  • For your 2016 Chevy Silverado 2500HD we have the Curt front hitch part # C31071 that is a confirmed fit. I attached an install video for you to check out as well.
    view full answer...

  • Will Curt Front Mount Receiver # C31071 Fit a 2015 GMC Sierra 2500 Denali
  • I spoke with my contact over at Curt and he said that front mount receiver # C31071 will fit your 2015 GMC Sierra 2500 Denali. The air dam may need to be trimmed for the hitch to fit. Since this hitch fits lower than the Draw-Tite model there won't be extensive trimming required, just the possibility of some trimming of the air dam.
    view full answer...

  • Weight Capacity of Curt # C31071 Front Mounted Receiver for 2015 GMC Sierra 2500
  • The Curt Front Mounted Receiver Hitch, part # C31071 has a 500 lb vertical line pull, so it can handle a vertical load of 500 lbs. Not only will you need to consider the weight of the bike in that 500 lb figure, you'll also need to consider the weight of the carrier you're using. My concern about using a motorcycle carrier on the front of a vehicle is that it can obstruct some of the airflow to the radiator, or could block some of he drivers vision and interfere with the headlights. If
    view full answer...

  • Will Curt Front Mounted Hitch for 2015 GMC Sierra 3500 Crew Cab Work With Rhino-Rack Load Assist
  • You can absolutely use all the parts you mentioned for your 2015 GMC Sierra 3500 Crew Cab in order to carry your kayak. The front-mounted hitch and Rhino-Rack T-Load Hitch Mounted Load Assist will be the perfect option for you, and you can get the T-Load with and roof rack to ensure your kayak doesn't scratch up your roof. The exact parts you need for your '15 GMC Sierra 3500 Crew Cab are the following: - Curt Front Mount Trailer Hitch Receiver # C31071 - Rhino-Rack T-Load Hitch
    view full answer...

  • Weight Compatibility of Motorcycle Carrier with Front-Mount Hitch on 2015 GMC Sierra 2500HD
  • The front-mount Curt hitch that fits your 2015 GMC Sierra 2500HD 4X4 is part # C31071 and this has a 500-lb vertical load limit. This means the combined weight of your 290-lb Yamaha motorcycle plus the weight of the chosen hitch-mount carrier together cannot exceed the hitch rating. The etrailer Motorcycle Carrier # e98873 weighs about 58-lbs and will allow your total weight load to remain well within the hitch capacity. It is important to keep in mind that a front-of-vehicle cargo load
    view full answer...

  • Ground Clearance of Curt Front Hitch Installed on 2018 Chevy Silverado 3500
  • When the Curt front hitch part # C31071 is installed on your 2018 Chevy Silverado 3500HD the ground clearance will be 7-7/8 inches.
    view full answer...

  • Which Front Hitch Fits 2018 Chevy Silverado 3500
  • We have confirmation from Curt that the front hitch part # C31071 fits your 2018 Chevy Silverado 3500 and we've also had the chance to test fit this hitch on a 2018 model just like yours so we know it fits as well. See attached install video.
    view full answer...

  • How to Haul Bikes On A 2017 GMC Sierra 2500 With Pull Behind Trailer
  • Yes, The Curt Front Mount Trailer Hitch Receiver part # C31071 is a direct fit for your 2017 GMC Sierra 2500 and absolutely, the front mount trailer hitch is completely safe as long as you are in accordance with the hitch and vehicle manufacturer's load and weight ratings. The vertical load rating for this hitch is 500 lbs. For a front mount hitch bike rack carrier I recommend the Swagman Original part # S64152-2. The Swagman Original is a heavy duty steel bike rack capable of carrying
    view full answer...

  • Recommended Front Mount Hitch for 2016 GMC Sierra 3500 Denali
  • The Curt Front Mount Trailer Hitch Receiver # C31071 referenced in your question is confirmed to fit your 2016 GMC Sierra 3500 Denali model. We have verified this with Curt. When installing the hitch you may just need to do some minor trimming of the air dam so that the hitch fits properly. I have attached the complete written installation instructions that you can also take a look at.
    view full answer...

  • Can Front Hitch and Plow Be Used on Front of 2016 Chevy Silverado 2500
  • I really wish I could say yes, but plow mounts and front hitches occupy the same area on the front frame of a vehicle so they can't normally be installed at the same time. Only option would be to install the front hitch and go with a plow that mounts in a hitch if you really need both. The K2 # K2AVAL8219 would work well with the Curt Front Hitch part # C31071 which is a confirmed fit for your 2016 Chevy Silverado 2500.
    view full answer...

  • Best Front Mount Hitch for a 2015 GMC Sierra 2500HD Denali
  • I recommend using the Curt Front Mount Trailer Hitch Receiver # C31071 for your 2015 GMC Sierra 2500HD Denali. The receiver for this hitch sits right below your bumper so you don't have to trim any fascia on your truck - it's a pretty simple bolt-on installation! Attached is an installation of this hitch on a 2015 GMC Sierra 3500 for you to check out. If you let me know what you plan on using the front hitch for I can make an additional recommendation if it's necessary.
    view full answer...

  • Alternate Installation Method for Installing Curt Hitch # C31071 on 2015 Silverado 3500
  • Thanks for letting us know how the install of the Curt Hitch part # C31071 went on your 2015 Chevy Silverado 3500. Sometimes hitches can get slightly bent in shipping which can cause the clearances to be tighter than intended. I am not 100% that is what happened in your situation but it is possible. Either way I am glad you got it figured out and installed. As long as you get all of the bolts installed and torqued to the specs in the installation instructions the way you get everything
    view full answer...

Info for these parts were:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Written by:
Laura H
Employee Dustin K
Video by:
Dustin K
Employee Jonathan Y
Video by:
Jonathan Y
Employee Michael B
Video by:
Michael B
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Shane H
Test Fit:
Shane H
Employee Robert C
Test Fit:
Robert C
Employee David F
Test Fit:
David F
Employee Bradley B
Test Fit:
Bradley B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


GMC Sierra 2500 Accessories