TorkLift Camper Tie-Downs - Custom Frame Mount - Front
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Part Numbers: TLD2106,TLD3109
Our Price: $945.23
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
part number: TLD2106
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing camper's weight evenly and lowering its center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 front tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
D2106 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
part number: TLD3109
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remove the arms and you'll hardly know the brackets are there
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Uses pre-existing holes in the frame - little to no drilling required
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
D3109 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Replaces D3108
Item # TLD3109
Video of TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Torklift Custom Frame-Mounted Camper Tie-Downs Installation - 2004 Dodge Ram Pickup
Today on this 2004 Dodge Ram Pickup 3500 Series Quad Cab, were going to install part number TLD3109. This is a TorkLift Camper Tie Downs. This tie downs are installed in the back of the bumper. To get our vehicle ready, we went ahead and sprayed it down with some Penetrant to help loosen up the bolts. What well need to do is go ahead and remove our bolts. Now were looking at the passenger side and this will be identical for our driver side as well.
Youve got a variety of bolts we have to uninstall, these locations and these two as well. Our tie down bracket is going to up in this place and this will be stuffed back on top of it. Now what we can do is actually just leave these as loose as possible and let this rotate out of the way as well too. We dont want to take them completely off. To loosen these fasteners up, were using the 15 mm socket. Well use the same socket on these two bolts.
These two bolts will require a 21 mm socket. On the other side is a handle nut. Lets go ahead and slide our bracket into place and then well install the hardware that comes with the kit right here. Well push that from the inside to the outside and then on the threads on the inside here, well install a flat washer, a lock washer and a nut. At this point, were going to leave this loose and were going to reinstall the original hardware. On this side, were going to start from the top and work our way down. With all our hardware loosely installed, well go ahead and tighten it down and then torque them down as per instructions.
Now to tighten these fasteners down, Ill need a 3-1/4 inch socket and a wrench. With all the bolts tightened down and torqued for our passenger side and basically were going to repeat all this on our driver side. With the tie down receiver in place and tightened down, well go ahead and install the bit insert. Well just go ahead and slide it in. You have a couple of adjustments for your tie downs. In this case, well just go ahead and just push it all the way in for storage and install the lock pin or snap pin.
That will finish it for the TorkLift Custom Frame Mounted Camper Tie Downs for the back of our truck part number TLD3109 on our 2004 Dodge Ram Pickup 3500 Series Quad Cab. .
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Front - TLD2106
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLD3109
Average Customer Rating: 4.7 out of 5 stars (3130 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: James02/02/2024
The drivers rear didn't get built correctly. the hole to put the tie done is missing. I had to drill a hole into the tie down so I could use it. Didn't notice the problem until I went to put the camper on my pickup. The other three are fine.
by: Craig03/25/2022
Forklift tie downs are manufactured to exact fit to existing manufactured frame rail holes. They lined up perfectly and after 6000 miles with camper on board have stayed secure. The only downside, (this is relative to when and ware you use you camper) they will corrode when driving through snow covered roads that have been treated with sand and/or salt. I use an oil based product to protect them corroding.
by: Russell04/13/2021
Easy install, very effective way to keep the camper were it's supposed to be. Just bought a new truck and ordered another set for it. As long as I have a bed mounted camper I will be using this tie down system.
by: Jerry12/15/2018
On my 2017 Ram 2500 HD, were easier to install than the front ones because you don't have to put that bolt inside the frame. There is a standoff for a wire on each side that had to be removed, and will need to be secured with a cable tie or something (see attached picture). I had to remove my Trekstep from the driver's side, but I knew I would have to do that, so no big deal. Again, these are very sturdy, thus very heavy, and lighter aluminum tie downs might be considered to reduce weight.
by: Chris 09/02/2022
This products is well made. The transaction was easy and the product arrived as expected. I've been using this product for a year and I have no complaints. It has held up well and does what it was designed to do.
Comments
After two winters on the road, this product shows no sign of wear. Im happy with my purchase.
Chris - 09/03/2023by: JOE08/17/2020
The rear mount arrived this morning, and I immediately went to installation,,,the only thing that could have made things easier would be, if I had a more powerful air wrench to take the bolts out,,,lol.
Looks great! The quality of your product is impressive! And, to think the dealer wanted to charge me $200 to put them on.
I see these as a permanent attachments to my truck,
by: Jerry08/04/2023
Love the TorkLift Tie-Downs! They are rugged and make loading and unloading much easier than my old basic Tie-Downs.
by: Wilk06/27/2021
Seem like a solid well built product. A bit of a pain to install and the instructions could have been more clear and the manual put together better but overall satisfied.
by: Cameron 07/08/2021
Easy to install and super secure! Made my Lance 1020 feel like its part of my truck. Highly recommended for the juggernaut class truck campers. I’ll never go back to the stake pocket style or bed mount tie downs again.
Comments
1 year later, Im still very pleased. Ive gotten many positive comments from people that didnt know they existed and, after talking to me, plan on upgrading themselves.
Cameron - 07/13/2022by: Earl M05/20/2017
TorkLift frame mounted tie downs, Torklift Fast Gun tie downs - AWESOME! Arrived Thursday as promised, picked the new Cirrus camper this morning. Installed the frame mounted tie downs - front and back - 1hour 45 minutes. Thank you etrailer!
by: jello09/04/2022
The TorkLift frame mounted tiedowns for my truck bed camper mounted perfectly on my 2016 RAM 3500. They are holding my camper on very securely and will be tucked away nicely when I remove the camper for Winter. I plan on making a footstep to slide into the receivers then, so I have much easier access to my high truck bed when I use it to haul firewood. The only suggestion I have is that we cleaned up the punched out pin hole edges with a file, inside the receivers. The sharp ridges would have scratched the hold down assemblies a bit when inserted into the receivers. Maybe an opportunity for a manufacturing process improvement there?
by: Bob 04/11/2024
Very stable easy to set up system
by: Eric A.06/29/2017
These camper tie downs have been fantastic! They were easy to install and have made securing my camper a breeze. I really like how easy it is to pull the tie down portion of the brackets out when you aren't carrying the camper. In my opinion this is the only way to secure a truck camper.
Comments
They were great. I ended up getting a different truck and bought another Torklift setup for the new truck. I couldn’t imagine using anything else for securing a truck camper.
Eric A - 07/02/2018by: Gaylen04/19/2024
Good service, haven't checked the packaging but everything looks OK from the outside.
by: Lawrence 09/17/2023
Perfect fit, Talked to Will on the phone and h got me the right set-up for my 2015 Dodge Ram 3500. Thanks Will.
by: Charles06/20/2023
The only Truck Camper tie down devices that I will ever use.
by: Clifford 03/20/2024
Easy to install whole job front and rear just under 3 hours
by: Nick 02/22/2024
They still work great after a year : )
by: Bruce 10/31/2019
These are very well made. They installed easily and fit perfectly. My only concern is that the tie down/turnbuckle attachment hole is slotted and looks potentially weak as a result. I don't know that it's weak, it just looks like making it without the slot would be a lot stronger.
Comments
After a year, these have worked out very well. The slotted holes I was concerned about have not been a problem.
Bruce - 11/04/2020by: Michael 08/18/2023
Great camper mount. Easy install, fit and finish is awesome
by: Rodney 04/03/2024
Very pleased.easy install
by: Kelly 04/11/2021
I am really happy with tork lift rear tie downs on my 2004 3509 Dodge Ram dually. They have worked out good for me. I did have to move my rear camper tie downs so the tie down rods would clear the fenders but overall I am very happy with the tie downs.
by: Mike12/05/2021
Great tiedowns, easy to install. Both slide in section of the tiedowns had areas where either the shipping caused issues or they had been used, not sure. Some of the powder coat areas were scratched up to bare metal. Other than that, they are nice and out of the way when not being used.
Comments
I will have our customer service team reach out to you. I also recommend touching up the tie downs with a rust resistant paint prior to installation.
-- 
Jenny N - 12/06/2021Rust Prevention
![Rust Prevention]()
by: John08/18/2020
Easy instal works great with our Ram 3500. Paired with torklift fastguns makes attaching camper quick and easy, and secure.
25
2410
Show More Reviews Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
- Will The Tork Lift Frame Mount Camper Tie Downs Fit A 2005 Dodge Ram 1500
- We have TorkLift camper tie downs available for your 2005 Dodge Ram 1500, but part # 39346 was designed for the 2500 and 3500 models and has been recently discontinued.
To determine which TorkLift camper tie downs are correct for your truck, I will need a little more information about your truck. If you can provide me with the following information, I would be happy to find the correct tie downs for you.
Bed length?
2WD or 4WD?
Factory trailer hitch, aftermarket hitch or no hitch?
I
view full answer... - Recommended TorkLift Custom Camper Tie-Downs for 2004 Dodge Ram 1500
- The TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2106 referenced in your question are confirmed to fit your 2004 Dodge Ram 1500 if it has a 6-1/2 foot bed, 2WD and does not have the board or step underneath the truck bed.
For the rear tie-downs, you will want # TLD3109 if you do not have a trailer hitch or if the truck is equipped with the factory hitch. You will use # TLR3500 if you have a non-TorkLift aftermarket hitch installed. These custom, frame-mounted tie-downs
view full answer... - Rear Torklift Tie Down for 2017 Ram 3500 Single Rear Wheel with Step Bars Factory Hitch
- The correct Torklift rear tie downs for your 2017 Ram 3500 with single rear wheel, 4WD, full length steps and a factory hitch is the part # TLD3109 that you referenced.
view full answer... - Torklift Camper Tie Downs for 2005 Dodge Ram 3500
- For your 2005 Dodge Ram 3500 long bed without running boards and a factory hitch you would want the part numbers # TLD2101 and # TLD3109 for a no-drill setup. This is the best setup you can get for your truck as it's the most secure and installs the easiest.
Then for a set of turnbuckles the FastGun part # TLS9529-2-LK would be a really great option that is easy to use and very well made.
view full answer... - Which Torklift Tie Downs Fit 2008 Dodge Ram 3500 Long Bed with Factory Installed Hitch
- The Torklift Tie Dowdn part # TLD3109 that you referenced is the correct rear tie down for your 2008 Dodge Ram 3500 Diesel 8 foot box with factory installed hitch. The matching front tie down is the part # TLD2101.
view full answer... - Do Torklift Camper Tie Downs Fit 2018 Ram 3500 with Factory Air Bags
- Yes, the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109 that you referenced do fit with the factory air bags you have on your 2018 Ram 3500 Crew Cab, diesel, 8ft bed, factory hitch, and cab length running boards. The correct front set you'd need for your truck is the part # TLD2127.
view full answer... - Recommended Frame-Mounted Camper Tie Downs for 2003 Dodge Ram 2500
- I do have a set of TorkLift Custom Frame-Mounted Camper Tie-Downs that are a confirmed fit for your 2003 Dodge Ram Pickup 4wd 6.5 foot bed with an aftermarket hitch and no steps or rails. You will want part # TLD2102 for the front, and part # TLD3109 for the rear. These inserts are custom designed for your Ram, and slide directly into your truck's frame-mounted brackets. The brackets fit tight to the truck frame with no loss of ground clearance. They are virtually undetectable when not in use.
view full answer... - Torklift Camper Tie Downs for 2008 Ram 3500 Long Bed without Steps and with Factory Hitch
- Since your 2008 Dodge Ram 3500 long bed doesn't have a factory step underneath it and has a factory hitch the correct Torklift tie downs are part # TLD2101 and # TLD3109 that you mentioned.
view full answer... - Does Torklift Tie Down # TLD3109 Fit 2015 Ram 2500
- Yes, the # TLD3109 fits many versions of the 2015 Ram 2500. Here is the fully list:
2014 - 2017 Ram 2500 6-1/2 Foot Bed - with board or step underneath truck bed and with a factory installed hitch
2014 - 2017 Ram 2500 6-1/2 Foot Bed - with board or step underneath truck bed and without a hitch
2014 - 2018 Ram 2500 6-1/2 Foot Bed - without board or step underneath truck bed or cab and with a factory installed hitch
2014 - 2018 Ram 2500 6-1/2 Foot Bed - without board or step underneath
view full answer... - Are Frame Brackets Offered Separately on TorkLift Frame-Mounted Camper Tie-Downs for 2004 Dodge Ram
- The TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLD3109 for rear or part # TLD2102 for front which are a fit for a 2004 Dodge Ram are only available as a full set meaning they come with both the receiver and removable arm, neither are offered separately unfortunately. In order to complete this setup you'll also need turnbuckles, the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9529-2-LK are what I recommend.
view full answer... - Is the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109 Sold in Pairs
- Yes, the # TLD3109 is a pair of tie downs.
view full answer... - Is the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109 a Pair of Tie Downs
- The TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109 is a pair of tie downs.
view full answer... - Does the Torklift Tie Downs # TLD3109 Come with Instructions and Mounting Hardware
- Yes, the Torklift tie downs # TLD3109 come with mounting hardware and instructions. I attached a picture of the mounting hardware as well as an install video down below for you to check out.
view full answer... - Is the TLD3109 Sold in Pairs and Availability of TLD2124
- The part # TLD3109 is for a pair of tie downs and we do carry the # TLD2124 as well.
view full answer... - Rear Tie-Downs Needed for a 2014 Ram 2500 6-1/2 foot Bed
- The rear tie-downs that you are needing is the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109.
These are compatible with your 2014 Ram 2500 with a short bed whether it has a board/step or a trailer hitch.
I have attached a review video for you to check out on a 2014 Ram 3500 for reference.
view full answer... - Correct TorkLift Frame-Mounted Camper Tie-Downs for a 2018 Ram 3500 Dually Crew Cab Factory Air
- The correct set of TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2018 Ram 3500 with the following options; 8' Long Bed, Crew Cab, Dually, and Factory Air Suspension is part # TLD3109 for rear and part # TLD2127 for the front if you have running boards or part # TLD2126 if you don't. For turnbuckles, I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9522-2-LK.
view full answer... - Which Truck Bed Camper Tie Downs For 2017 Ram 3500 DRW 8 Bed w/ Cab Length Running Boards
- For your 2017 Ram 3500 Long Bed Dually Crew Cab with factory hitch and running boards that are cab length you'll need the below truck bed camper tie-downs:
Front # TLD2124
Rear # TLD3109
You may also need the relocation kit # TLA7004. This is needed if the measurement from front of camper slide in point to rear anchor point is less than 90".
If you don't already have them you'll need turnbuckles as well, which # TLS9529-2-LK will work perfectly.
view full answer... - Which TorkLift Camper Tie-Downs Fit a 2015 Ram 3500 Crew Cab Short Bed and Cab Length Running Boards
- The correct TorkLift tie downs for your 2015 Ram 3500 Crew Cab Short Bed with the cab length running boards are the TorkLift Frame-Mounted Camper Tie Downs - Front # TLD2130 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLD3109. These are custom fit to your Ram 3500.
If you don't have turnbuckles I recommend using the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4 # TLS9529-2-LK.
I've linked some review and installation
view full answer... - Which Torklift Camper Tie Downs Fit 2012 Ram 3500 Short Bed 4x4 SRW
- The correct Torklift camper tie downs for a 2012 Ram 3500 with a short bed, single rear wheel, and 4WD is the part # TLD2119 and # TLD3109.
view full answer... - Custom Frame-Mounted Camper Tie-Downs For A 2003 Dodge Ram 2500/3500 Long Bed
- Yes that is correct, the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109 and the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2101 that you mentioned is the correct front and rear tie downs needed for your 2003 Dodge Ram 2500/3500 long bed, and includes everything you need for installation.
Additionally, you are going to need a set of turnbuckles # TLS9529-2-LK to secure your camper to your truck bed.
Attached is a review video for you to check out as well.
view full answer... - Custom Fram-Mounted Truck Camper Tie Downs For a 2009 Dodge Ram 3500 Long Bed
- Yes the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD3109 and the TorkLift Custom Frame-Mounted Camper Tie-Downs # TLD2101 will fit your 2009 Dodge Ram 3500.
These are custom fit for your vehicle and is made from powder coated black steel for a durable, rust resistant finish.
Additionally, you are also going to need a set of turnbuckles # TLS9529-2-LK to secure your camper to your vehicle.
view full answer... - Camper Tie Down Kit that Can Fit 2018 Ram 2500 with Rear Fold Down Bumper
- I wish we had a rear Torklift tie down that fit your truck but none of them will fit with the rear bumper fold down step that you have. You'd have to go with a stake pockets tie downs like with the Brophy part number # HSAB.
Then for a hardware kit to attach from the brackets to the camper you'd want the part # TDHP.
view full answer...
TorkLift Accessories
Fit to this rack on your 2004 Dodge Ram Pickup
Info for these parts were:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Clayton O
Video by:
Andrew K
Video by:
Alan C
Written by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Cole B
Installed by:
David F
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.