Part Numbers: TLF2020,TLF3007
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (3153 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.I had the mountings professionally attached to the frame. The hatches can be easily removed when not in use( and I would recommend that to keep them from being stolen). Using chains and turnbuckles, I feel very comfortable with my truck camper staying where it is.. does not rock, very solid.
It’s nice to feel secure about my camper staying firmly attached.
It was worth the investment.
They work great. Rear brackets are easy to install.
Installed easy. Fits great!
Fast free shipping, quality parts, and relatively simple to install.
Well I was not impressed with the paint work.
Very poor paint work.
Most people know that when you paint metal . You first must use primer on the metal before you apply final paint. Its not rocket science. Its obvious no primer was applied . The paint has pilled off in many areas exposing the bare metal, no primer and even a little rust.
This demonstrates proof in lack of pride in workmanship within your company. It show the ( I don't care about quality attitude.)
Now I will have to sandblast these parts myself , Prime with epoxy primer and paint again.
I can only assume that now that you have my money . Who really cares.
Would I recommend
this product and your company
online ???
You tell me
I purchased the front and rear frame mounted tie-downs for my 2017 F-150. The whole installation took 3 or 4 hours. I don't work very fast. The tie downs solved several problems I had with anchoring my truck/camper. The tie-downs that came with the camper were just not adequate and forced the camper to sit higher in the bed of the truck. Not enough length for chains and shackles. These ties-downs sit low and if used with the TorkLift turnbuckles makes for a clean, solid and functional installation. My only issue is that one of the turnbuckles passes right in front of the gas filler cap. I purchased TorkLift FastGuns for the font so that it made for easy removal when I am filling up at the gas station. This isn't a TorkLift problem, it is just the way the everything ties down. I also like the way the tie-down extensions can be removed when not in use. I would not hesitate to purchase these products again if I was installing another truck/camper. Great product.
These went on as well as could be expected for where they are installed. The rears are easier than the fronts. The fronts went well with the provided instructions and the awesome bolt thread wires. Functionally they are perfect for holding down my camper.
Bolt on easy and hold solid like you need. Low profile appearance - don't stand out when not using and inserts removed. Great product - love mine! You won't be dissapointed.
Easy to follow install instructions and able to 1 man install the kit. Took about 1 hour to install and once complete felt very secure, With help of rear supports as well it helped secure the cabover to truck for a more even load.
Was quite concerned when I went from an older F250 to a 2017 F150 in carrying my Truck Camper. The stable loads on the new truck gave me even greater stability and confidence than on my F250. Highly recommend them !
great set of camper tie downs for my f150! easy to install and remove.
I installed them at home, rather than pay the shop several hundred dollars. The installation was straight forward with clear instructions. It took me 2 1/2 hours start to finish for front and rear, the same as quoted by the shop.
Great product easy to install very happy with my purchase. Etrailer is a hassle free easy company to deal with, received updates on order confirmation and delivery! Very happy will do business again In the future.
Shoosh
4/7/2018
Couldn’t be happier with the product and the purchase!!
it's been over a year and I'm very happy with this setup. It can be a challenge running the bolts with the enclosed wire tool, but other than that pretty straight forward install for the average truck owner. watch a u-tube video for install tips. It will save you time.
Overall seems OK. I haven't used it yet. The thru holes on one of the arms were not drilled. I had to do it myself. And the lock nuts they gave to replace the factory nuts used on the leaf spring bolts were the wrong thread size. I used locktite and the factory nut.
The front torquelift camper mounts for my 2017 ford f150 supercab 6.5 bed required grinding resulting from interference with bed/frame mount. Lower shackle mount did not line up. Rear mounts installed with no problem.
Easy to follow install instructions and able to 1 man install the kit. Took about 1 hour to install and once complete felt very secure, With help of rear supports as well it helped secure the cabover to truck for a more even load.
I think they are a little pricey but not aware of any better alternative for the F 150 with aluminum bed. Hats off to the engineers that design the hold downs. Install took about 2 hrs. Instructions were excellent and easy to follow. Great customer service from etrailer on the order.
They are simple to install and are easy to connect the hangers to the bracket when needed.
Just what I needed. Relatively easy installation. No drilling.
Quality product with plenty of online demos for installation advice. Online ordering was easy and delivery was as promised. What more could you possibly ask for!
2018 f150, easy install, great support from etrailer.
Great dealing with them and fast shipping not to mention easy installation.
Simple installation
Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
TorkLift Accessories
Fit to this rack on your 2017 Ford F-150
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dan A.
6/28/2018
Still very happy - great product - well made, thank you!