TorkLift Camper Tie-Downs - Custom Frame Mount - Front
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Part Numbers: TLT2301,TLT3301
Retail:$896.92
Our Price: $853.16
You Save: $43.76
This item qualifies for Free Shipping
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
part number: TLT2301
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing camper's weight evenly and lowering its center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 front tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
T2301 Tork Lift Truck Camper Tie Down - Front Frame Mount - Custom Fit
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
part number: TLT3301
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.
Features:
- Creates attachment points for securing your camper to your truck bed
- Requires turnbuckles (sold separately) to attach camper to tie-downs
- Ensures excellent handling by distributing the weight evenly and lowering the center of gravity
- Avoids a top-heavy setup that would be vulnerable to strong winds and sway
- Remains virtually invisible beneath your vehicle
- Remove the arms and you'll hardly know the brackets are there
- Adjusts for simple, secure connection to camper
- Extend arms out from truck body to clear bowed sidewalls and fenders
- Choose between 2 anchor holes to get the best angle for a secure hold
- Made of black powder coated steel to resist corrosion
- Mounts tight to your vehicle's frame - minimal loss of ground clearance
- Uses pre-existing holes in the frame - little to no drilling required
- Includes 2 rear tie-downs and installation hardware
- Made in the USA
- Lifetime warranty
A Safe Ride is a Comfortable Ride
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity will sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Don't Ruin Your Truck's Looks
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush with the underside of the vehicle. Remove the arms from the brackets when you're not hauling your camper, and the brackets will be barely visible.
Custom Fit, No-Drill Installation
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Securing Your Camper
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
T3301 Tork Lift Truck Camper Tie Down - Rear Frame Mount - Custom Fit
Item # TLT3301
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Did not arrive in time
Customer Reviews
TorkLift Camper Tie-Downs - Custom Frame Mount - Front - TLT2301
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear - TLT3301
Average Customer Rating: 4.7 out of 5 stars (3159 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. Great for your truck's looks: remove the arms from the brackets and you'll hardly know that the brackets are there.by: Montana Hunter / Fisherman01/05/2024
2001 Toyota Tundra
Rear tie downs for my 2001 tundra little more complicated to install than front by myself because you had to wedge between of tight access and old hitch receiver and frame. Although, once installed… worth every penny. Having camper attached to frame makes for less too heavy and more off-road capable. Drives fine in wind at 75mph
by: Rodney10/14/2022
The lady who took my order gave me a delivery date of Thursday, 10/13/22. The email that immediately followed my phone conversation confirming my order gave me a date of 10/14/22. I am very disappointed because I schedule to have the Torklifts installed today.
by: Brian08/15/2019
2002 Toyota Tundra
Extremely pleased and satisfied with the customer service I received. When there was a problem with getting my product they contacted me on Sunday and took care of all my needs. Thank you so much.
by: John 07/19/2021
Product fit perfectly, easy to install, very happy.
by: John 07/19/2021
Product fit perfectly, easy to install, very happy.
by: Atlas01/05/2024
by: Michael 10/29/2022
by: Kian12/31/2021
2002 Toyota Tundra
by: Reed04/11/2023
The units appeared to be well made and were nicely painted. I installed them on my F150. The tools and hardware supplied were of good quality and installation was straight forward. Two people would have been great, but I was able to install both sides in a little less than an hour. The holes all line up very well. I like these better than the previous units I had on my 2013, as they do not stick out as far - so less noticeable. The extension arms come out at a very nice angle just under the body. I find these units with quality I expected and I think they will be highly functional in attaching my camper.
by: Dot07/15/2022
I had the mountings professionally attached to the frame. The hatches can be easily removed when not in use( and I would recommend that to keep them from being stolen). Using chains and turnbuckles, I feel very comfortable with my truck camper staying where it is.. does not rock, very solid.
It’s nice to feel secure about my camper staying firmly attached.
It was worth the investment.
by: Matt 03/30/2023
They do exactly what you think they'd do. I actually had to swap them from one truck to another (went from an double cab to a crew cab) and TorkLift actually sent me a whole new hardware kit. The hardest part is fishing the bolt/nut setup on the driver's side as the gas can is in the way, other than that it's easy peasy.
by: Charles 12/21/2022
A little tougher to install than the front ones but not too bad. Torklift tie downs are very well made, tried he bumper attached one but I guess bumpers aren't what they used to be I saw bending at the tie down after one trip. So bought these. Entrailer as usual priced well and fast shipping.
by: Brian04/12/2024
The product was easy to install, a bit awkward with only one person on the front tie downs but if you had an extra set of hands then that problem would be solved.
The top bolt hole on the front passenger side was out by about 1/8" but I resolved that by being able to get a drill on the inside of the frame and drilling through that way to allow the bolt to go through both truck frame and tie down. If it had been on the driver's side then it may have been an issue with the gas tank in the way. All is now installed and ready to go,
by: Tim C03/03/2024
Tommy C recommended the TorkLift Camper Tie-Downs. The Instructions are great and very easy to follow. They supply some cool wire helpers to hold bolts in the frame for you. All went very smoothly and a very secure. I love how solid the Camper feels on the truck.
by: Tim C03/03/2024
Tommy C recommended the TorkLift Camper Tie-Downs. The Instructions are great and very easy to follow. They supply some cool wire helpers to hold bolts in the frame for you. All went very smoothly and a very secure. I love how solid the Camper feels on the truck.
by: Mark04/10/2024
Front and rear tie downs came in two separate boxes. Back tie down box was fine but front tie down box was broken open with one of the T bolts hanging out. Fortunately both T bolts were in the box. There have been numerous reviews about bad packaging and parts missing and beat up so I think whoever is packaging these parts should take heed and do a better job. The rear tie downs went on fine with the help of the video instructions. The front however were harder and required me to grind down the T bolts so they would fit correctly (see pictures). I also had to enlarge the elongated holes to get the bolt in. Also the order of the instructions was in my mind incorrect. I installed the angled bracket supports first and then the main brackets. My recommendation would be to post a video of the installation procedures like they did for the back tie downs. All the parts were well made except the front T bolts and I am hopeful that they will last a long time. The pricing in my mind is high but they appear to be the only game in town so it is what it is. I do recommend these as they seem very strong and well designed.
by: Fred06/02/2023
Got the tie-downs today. Shipped quickly. There is an extrusion ridge on the inside of the square tubing my hitch was made from. I had to file that out. Once done, everything slipped together like an Erector-Set project. Whole thing took 20 minutes. Very pleased.
by: Flanagan06/18/2023
Easy to install. Took less than an hour with no helper. They are very sturdy and I expect them to last.
2020 RAM 3500 with OEM hitch.
by: Keith09/05/2022
The package arrived very quickly and intact. I have a 2020 Ford F250 SD Lariat short bed with a factory hitch. The tie-downs were really easy to install although the hitch adapter plate (see attached photo) which is supposed to attach to the end of the tie-down would not fit inside the tubing on my factory installed hitch so I installed without it and it is tight and snug
by: Rus12/13/2022
Great quality product. Arrived on time. Drivers side took a little longer because of fuel tank skid plate removal. Overall very sanitary application.
by: Chris S-01/27/2024
TLN3404 installed on 2016 Titan XD. Very sturdy product, hardware was short by (2) 1/2” flat washers, (6 shown on instructions, 4 in package)no big deal there. Install goes fast with an impact gun. 3/4”(19mm) and 17mm sockets plus a 3/4 wrench req. tip: if you have a small magnet, width of a pencil, you can easily capture the flange nuts. My driver’s side clears the 6” exhaust tip by a 1/4”, should be fine. Directions are straightforward.
by: David05/15/2024
They are a great product, they look and work very well. I have had them installed for a year and used several times. I am very satisfied with the ease of installation and how they are out off the way when not in use. The only drawback to the camper tie down assembly was the cost, it is rather a pricey kit, but other than that they are exactly what I expected.
by: Justin U04/19/2023
Easy install and just a great product. Install took 90 minutes for front and rear mounts.
by: Stacey07/12/2023
Poor packaging, missing parts and showed up looking used from being beaten in shipping.
by: Camden04/26/2024
No worries about securing the camper to the truck using the Torklift tie-downs. Third camper/truck I have used these on and would not consider any other option.
25
2433
Show More Reviews Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
- 2006 Toyota Tundra TorkLift Custom Frame-Mounted Camper Tie-Downs
- We have a confirmed fit for your 2006 Toyota Tundra in the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLT2301 for the front, and # TLT3301 for the rear. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle. No drilling for the front, some drilling will probably be required for the rear.
We have the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs, # TLS9000. These come in a quantity of
view full answer... - Correct TorkLift Camper Tie-Downs for 2002 Toyota Tundra Access Cab with 6.5' Bed
- The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2002 Toyota Tundra (Factory Hitch, Access Cab, Standard Tow Package, 6.5' Bed) is part # TLT2301 for the front and part # TLT3301 for the rear. Please note, the running boards/nerf bars will only work if they are cab length otherwise they'd need to be removed.
In order to secure the truck bed camper to said tie-downs, I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9522-2-LK.
view full answer... - Torklift Camper Tie Downs that Fit 2000 Toyota Tundra
- Yes, the Torklift camper tie downs part numbers # TLT2301 and # TLT3301 are a confirmed fit for your 2000 Toyota Tundra and would work great. For a set of stainless steel turnbuckles that would work great and come with locks you'd want the part # TLS9529-2-LK and you'd be set.
view full answer... - Will the TorkLift Tie Custom Frame Mounted Camper Tie Downs work on a 2003 Toyota Tundra Step-Side
- Yes, if you have the 6-1/2 foot bed, HD or standard tow package without any running boards or steps underneath, the TorkLift tie downs # TLT2301 (front) and TLT3302 (rear) will fit your 2003 Toyota Tundra step-side bed with factory or an aftermarket non TorkLift installed hitch.
view full answer... - Custom Frame-Mounted Camper Tie-Downs for 2004 Toyota Tundra 4x4
- There are a few possibilities for the correct TorkLift Cutom Frame-Mounted Camper Tie-Downs on your 2004 Toyota Tundra 4x4, depending on its exact configuration. I will list them below:
If your Tundra has the 6 foot bed, standard or HD tow package, has an aftermarket (but non-TorkLift) trailer hitch installed, and isn't equipped with boards or steps underneath the bed you will need part # TLT2301 for the Front and # TLR3500 for the Rear.
If the Tundra the 6 foot bed, standard tow
view full answer... - Recommended Camper Tie Downs for 2001 Toyota Tundra with 6 Foot Bed
- I have a solution for you, but HappiJac does not make a compatible tie down with your 2001 Toyota Tundra with a 6ft bed. Instead, you'll want to use the TorkLift Custom Frame Mounted Camper Tie Downs # TLT2301 (front) and # TLT3301 (rear), which are a confirmed fit for the 2001 Tundra with a 6 Foot long bed, factory hitch and no board or step under the truck bed.
view full answer... - Correct TorkLift Camper Tie-Downs for 2003 Toyota Tundra Access Cab with 6.5 Bed
- The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2003 Toyota Tundra (Factory Hitch, Access Cab, Standard Tow Package, 6.5' Bed) is part # TLT2301 for the front and part # TLT3301 for the rear. Please note, the running boards/nerf bars will only work if they are cab length otherwise they'd need to be removed.
In order to secure the truck bed camper to said tie-downs, I recommend the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs part # TLS9522-2-LK.
view full answer...
TorkLift Accessories
Fit to this rack on your 2000 Toyota Tundra
Info for these parts were:
Written by:
Lindsey S
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Amanda K
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.