Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs
(72 reviews)
Price: $154.52
In Stock
Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs
Item # 1120210
Our Price: $154.52
This item qualifies for Free Shipping
In Stock
- All Info
- Reviews (72)
- Q & A (0)
- Videos (3)
- Photos
- Why etrailer?
Superwinch Electric Winch - 1120210
- ATV - UTV Winch
- 1001 - 2000 lbs
- Wire Rope
- Superwinch
- No Remote
- Slow - 0 to 4 FPM
- 1.0 HP
- 11 - 20 lbs
- 1-Stage Planetary Gear
Features:
- Features:
- Powers Load IN and OUT
- Includes freespooling clutch for fast wire rope payout
- High efficiency low amp draw motor
- Full-metal planetary gear-train
- Sealed, handle-bar-mounted rocker switch
- Dynamic brake
- Circuit breaker protected
- Includes Pulley Block, D-Shackle and Roller Fairlead
- Fairlead requires mount kit (sold separately)
Specs:
1120210 Superwinch ATV Recovery Winch
California residents: click here
Video of Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Superwinch LT2000 ATV Winch Installation - 2011 Honda Rancher
Today on our 2001 Honda Rancher were going to be installing the Superwinch LT2000 ATV Winch part number 1120210. Well also be using the ATV winch mount kit part number 2202889 designed specifically for the Honda Rancher. To begin our install were going to remove the black bumper cover from the ATV. You have the 2 bolts on the bottom of the bumper cover and on the top here are 2 pushpins. With our front bumper cover removed well go ahead and loosen up the lower cover which will allow it to flex like so. We can now take our bottom plates facer and our main plate 2/4 by 3/4 bolts and their nuts within the frame of the ATV here.
Well take the spacer block and place it in to take up the space within this frame. We can then take our main plate line up the holes that are already there with the frame and slide our bolt through. We can then put the nut on the other side and tighten it down. With our main plate attached to the frame here well install the U-bolts. Now that weve worked our U-bolts over the frame of the ATV we can put the nuts on the backside.
Alright, now were ready to go ahead and install our winch. Well need our spacer plate, 2 bolts supplied with the winch, washers, and a nut. Now, our winch will go in from the left side if youre sitting in the seat. You wanna make sure that the winch spools off of the top of the drum, thats how youll know that it is in correctly. Well take our spacer block and our bolt and feed it through our top mount and then put the winch through the bolt using our 2 washers, flat washer and the lock washer.
We can then install the nut and well repeat this process for the other mounting point of our winch. With our hardware loosely fitted well go ahead and install the smaller bolt, also included with the winch, into the remaining bolt hole of our bracket thats open just to kind of hold the spacer in place and with all our fasteners loosely fitted well go ahead and tighten them down with a wrench. And with that our winch is secured and we can move on to the Roller Fairlead. Now after gathering the hardware to install the Roller Fairlead well pre-assemble it before we mount it onto the vehicle. Youll notice that 2 round spacer within the tubes that surround the bolt.
These prevent the tubes from collapsing while youre tightening it down. Well now go ahead and feed it through the 2 holes in the main plate where we can put the nylon buts on the backside and tighten them down. And with our Fairlead now installed we need to get our cable through. Well go ahead and loosen up one of the horizontal rollers where we can slide the bolt out and remove our roller. We can then bring our cable up through the Fairlead and reinstall our roller. Now, you dont want to tighten the roller too much as it does need to roll to prevent the cable from binding or damaging. Well now go ahead and install the 2 lower bolts back into the lower steel plate that we took out earlier. Well go ahead and install this bolt here on the lower cover. When installing this bolt we do need to put in this extension which will allow us to attach the upper front bumper cover. Now, you wanna leave this bolt slightly loose so that your bracket can move around a little bit. While we install the upper cover well then go back and tighten it down later and well repeat the same process on installing the other bracket on the other side. Now, well need to locate a ignition source for our winch that will only allow the winch to work when the key is in the on position. Weve gone ahead and removed the light cluster from our four wheeler, located the ignition key wiring itself, found a wire that is only hot when the key is turned on and tapped into it. Now, we went ahead and found a location for our solenoid box and secured it to the frame. We then routed our wire along the frame following the factory wiring harness where we secured it to the body of the ATV and made our connections to our winch. We also went ahead and then connected our switch here at the green and black wires. Well go ahead and tuck those into the factory wire harness to give it a nice, clean look. Now we brought our battery wires up through again following the factory harness around to the battery. We connected our circuit breaker in line with our positive lead to our battery and taped it up so it doesnt have a chance of hitting anything metal and shorting out on us. We can simply tuck that out of the way and bring it around to our positive battery terminal where we will make our connection. Well then repeat that process for our ground side of our winch. Before you reassemble your four-wheeler you may wanna go ahead and turn your four-wheeler on and test the winchs operation. Our installation is complete, now we can go ahead and reinstall our front upper bumper and that will complete the Superwinch LT2000 ATV winch part number 1120210.
Customer Reviews
Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs - 1120210
Average Customer Rating: 4.8 out of 5 stars (72 Customer Reviews)
by: Ed S.04/08/2014
I installed the Superwinch LT 2000 on a 2007 Honda Rancher and also the mounting kit # 2202889. The install went well. I had never put a winch on an ATV before. The video on etrailer was very helpful and would have been difficult to install without it. The instructions that come with the winch and the mount kit are minimal. I found the electrical wire length to be enough as I mounted the solenoid right behind the battery under the seat. The pink wire on the ignition was what I used to tap into to run the switch.
by: William J08/16/2017
I bought this 2000 lb Superwinch for the replacement of a 1000 lb winch on our houseboat. The winch is used to secure a jetski on the back of the boat! The winch works perfectly and the price and free shipping are what brought me back to etrailer! I'm a very satisfied customer.
by: Darrin K08/27/2014
Not impressed, was missing two bolts, two lock washers and two nuts. Had to go to the hardware store to get more. Instillation directions are a joke. I do not recommend.
by: Chris R.10/28/2016
Easy installation, mounted perfect to my Polaris 400 Sportsman ATV using the mounting kit that came with the winch.
by: Rudy R10/30/2021
Easy to install. A little noisy but what the heck it’s a winch. Great alternative for the factory version if you can find one. Factory version $350, this set up half the price.
by: Brad 01/22/2022
Incredible fast shipping and a great pr ice
by: Stephen Pope06/12/2017
I haven't installed the product yet, but the etrailer sales rep Kelsey was very helpful through the process.
by: George 05/11/2020
I did not install it yet, however the service from the etrailer was impeccable
by: Eric E01/06/2015
your product 1120210 is very good, I have one on my 4 wheeler and am very satisfied with it. thank u for an affordable great product.
by: Keith11/27/2016
Works good with plow, very fast for raising the plow. Would have liked longer cables to the battery in order to mount the box in the front.
by: Allen 06/01/2020
Good product, reasonable price, and fast shipping.
by: Monte03/28/2016
Great seller and product quick shipping thanks a lot. Putting on a four wheeler for a plow
by: dan m08/08/2013
everything went well till wire and solenoid
by: Russel 02/08/2021
great shipping product for a atv plow
by: TOM03/28/2013
Product as described. Great customer relations. Immediate shipment. Pleasure doing business with. Have placed an additional order.
by: Dave H02/19/2016
All Hardware to make winch work included which make it convent to install
by: JIM R.02/01/2017
THE WINCH WAS JUST WHAT I WANTED AND AT A GOOD PRICE AND I GOT IT VERY QUICKLY. GREAT PRODUCT AND GREAT SERVICE
by: Jim02/03/2016
Very pleased with the product itself as well as the price. Delivered on time. Absolutely zero problems.
by: Chris11/29/2018
easy install and works great! fast ship ping
by: RB05/23/2014
Great product, great service, installed on 2014 polaris sportsman
by: Robert Showman 09/07/2017
Works great!
by: Kenneth03/16/2022
by: Donna 12/09/2021
by: Darrell 08/23/2021
by: Linda 09/05/2020
25
72
Show More Reviews
See what our Experts say about this Superwinch Electric Winch
- Superwinch LT2000 Winch has a 2,000 Pound Line Pull RatingThe Superwinch LT2000 Electric Utility Winch, 2,000 lbs, item # 1120210, has a 2,000 pound line pull rating. That means that as long as your boat and everything inside the boat weighs less that 2,000 pounds, he should be fine with this winch.
view full answer... - Are There Winches for Trailer Doors that Run on 110/120V AC PowerMost our winches will be 12V DC winches for automotive and ATV applications. We do have some AC winches that may work for you. I have added a link to all of our AC powered winches for you to look through. A winch with a 1,000 pound capacity or more should be enough to lift the door.
view full answer... - Installation of the Remote for the Superwinch LT2000For the Superwinch LT2000 ATV Winch # 1120210 we currently sell that winch kitted with the upgraded switch kit. This switch kit would attach to the handle bars on your ATV that you were using the winch on. If you are talking about the hand held remote for the Superwinch LT2000, it is no longer available from the manufacturer. To wire up the hand held remote you would route both the red and black wires from the winch to the remote, and from remote to the battery. Next install a circuit...
view full answer...
- Can Superwinch LT2000 ATV Winch be Wired Using a Factory Fuse on a 2014 Polaris Sportsman 400I strongly recommend using the circuit breaker since it will auto reset unlike a fuse that would blow and would have to be replaced. Also the winch # 1120210 was designed to be wired up using the circuit breaker and not for use with a fuse. I have linked the instructions and a video showing an installation of the winch for you.
view full answer... - Will Superwinch LT2000 ATV Winch Run Off of a 12 Volt 7.2 Amp Hour BatteryProvided that the battery can handle the 100 amp power draw at 12 volts then you can use it to power the Superwinch LT2000 # 1120210. The wiring and fuses used for a 12 volt outlet such as a cigarette lighter are not rated high enough for the power requirements of this winch. I have linked a help article on wiring an electric winch for you.
view full answer... - Can the Superwinch LT2000 Pull a 3700 lb Camper up a 10 Percent GradeYes, the Superwinch LT2000 Electric Utility Winch # 1120210 would work well for you. As the 2,000 lb rated line pull of this winch can handle 10,000 lbs of rolling weight at a 10 percent incline so you should be more than good. Check out the FAQ I attached that has a chart on rolling weight capacities based on grade percentage.
view full answer... - Would a Superwinch LT2000 Electric Utility Winch # 1120210 Work To Winch my 21 ft Party BargeIn order to determine if this winch would be a good choice for your trailer you want to know the weight of your 21 ft party barge. This Superwinch LT2000 Electric Utility Winch # 1120210 has winching capacities of 2,000 lbs. However, boat-size-to-winch capacity is generally 2 to 1, so if your boat weighs less than 4,000 lbs this winch would be a good choice for you. I also attached an FAQ on hand winches that you might find interesting also.
view full answer... - Can an Electric Winch be Powered by the Alternator on a TruckAn electric trailer winch can be wired to your truck in several different ways, but none of them involve the attaching the winch power wire to the vehicle alternator. It will always somehow be connected to the vehicle battery or its own battery. I have included a link to our FAQ article that covers the different ways you can wire the winch. I am sure you will find at least one of the methods will suit your needs.
view full answer... - Where to Install Solenoid and Circuit Breaker for Superwinch LT 2000 on a 2010 Polaris Sportsman 500Typically, you will mount the solenoid and breaker under the seat where the battery is or on the frame in this same general area. I have included a link to a video showing a typical installation of Superwinch LT2000 on a 2012 Polaris that you can use as a guide.
view full answer... - Installing Winch With Separate Battery In Bed Of TruckFor the application you have described, I recommend using the Superwinch LT2000 Electric Utility Winch # 1120210. This system doesn't require a solenoid or splicing into the ignition circuit. I have attached a diagram showing the wiring for this utility winch. To protect the winch battery in the bed of your truck, I recommend using a battery box. I have attached a link to all of our battery boxes for you.
view full answer...
- Electric Winch Recommendation for Forest River Pop Up CamperWe have 12 volt winches like the Superwinch LT2000 part # 1120210 that would work well for what you need as this has a 2,000 lb capacity but we do not carry the specific winch you are looking for.
view full answer... - Recommendation For A Winch To Pull A Harley Triglide Into A Toy HaulerNice ride! I recommend using a power winch like the Superwinch LT2000 Electric Utility Winch, Item # 1120210. This winch has a 50 foot wire rope, has a rated line pull of 2,000-lbs, and a plug-in remote. This winch is a high efficiency low amp draw motor that will need 12v power. Make sure to firmly mount it in a stable location on your trailer. The Superwinch is capable of pulling about 4,300-lbs of rolling load up a 40 degree ramp which will be more than enough for your Harley Triglide....
view full answer... - Weight of Superwinch LT2000 # 1120210The Superwinch LT2000, part # 1220210, ships at about 19 pounds. Fully assembled and installed it's listed at 14.2 pounds from Superwinch.
view full answer... - Is the Superwinch LT 2000 Weatherproof Against the Weather ElementsThe Superwinch LT 2000 ATV Winch, # 1120210, is a quality winch that will give you 2,000 lbs of line pull. However, the unit is not waterproof. The LT 2000 winch will have a weather resistant covers that will help protect from the elements, but over long term the unit could be impacted by the weather elements. To prolong life, I recommend covering unit in a weather resistant cover to protection when not in use.
view full answer... - Recommended Electric Winch for Raising and Lowering a Pop Up CamperIf you're going to use a winch to raise and lower your popup you will want a winch that power loads both in and out. With a winch that will only power load in you will only be able to raise the popup and not lower with the winch. We have the Superwinch LT2000 # 1120210 that will load both in and out.
view full answer...
- Can Pop Up Camper Trailer Hand Winch be Replaced with Electric WinchIf you're going to use a winch to raise and lower your popup you will want a winch that power loads both in and out. With a winch that will only power load in you will only be able to raise the popup and not lower with the winch. We have the Superwinch LT2000 # 1120210 that will load both in and out.
view full answer... - What is the Mounting Bolt Pattern for Superwinch Electric Utility Winch # 1120210The mounting bolt pattern for the Superwinch LT2000 Electric Utility Winch, # 1120210, is two holes, 3.15 inches apart. This winch can be mounted in place of a manual winch and my contact at Superwinch assured me that the unit is waterproof so you should have no problem when using this on your boat trailer. Please keep in mind that the Superwinch LT2000 Electric Utility Winch, # 1120210, has a line pull capacity of 2,000 pounds.
view full answer... - Troubleshooting Winch On UTV that Stalls Out Engine When OperatedWhat is happening is that your winch is drawing too much and is causing the ignition to stop working on your 2007 Polaris UTV. Typically this is caused by faulty wiring, but since yours is brand new the problem is most likely that you have a bad battery that can't handle the load the winch puts on the system. If you rev up the engine while using the winch and it seems to work then the problem would be the battery.
view full answer... - Recommended Winch to Load Wheelchair into Back Seat Area of Ford F-150 SupercabI spoke with my contact at Superwinch and we recommend taking a look at the LT2000 ATV Winch, # 1120210. This winch is very easy to mount and use and comes with a handheld remote. As for speed, this winch has a line pull of 10' per minute at 0 lbs and 2.5' per minute at 2,000 lbs. When it comes to whether this will be quieter that your current winch, I could not make any guaranties. All of our electric winches have a much higher capacity than what you require. For a winch with a capacity...
view full answer... - Can the Superwinch LT2000 ATV Winch be Used to Pull Snowmobiles into an Enclosed TrailerThe Superwinch LT2000, # 1120210, has a rated line pull of 2,000 lbs.This winch will have enough line pull power to pull up your snowmobiles into your enclosed trailer. You will have to custom fabricate a mount that will fit your trailer. A welding shop might be able to help you in making a mounting system. This winch has mounting holes on the bottom plate so you can bolt it to a surface. You will have to find an area inside your trailer at the front for mounting the winch. The spot where...
view full answer... - Where Does The Red Rocker Switch Wire Attach To When Installing SuperWinch LT2000?When installing the Superwinch LT2000 ATV Winch # 1120210 on atv's or offroad vehicles, the red wire on the rocker switch typically connects to a wire that gets power only when the ignition switch is turned on. When using this winch on a trailer or other application that does not have an ignition switch, you can just run it to the positive terminal on the battery that it is connected to and install a toggle switch in between so that you can switch the winch on and off, then actually control...
view full answer...
- Replacement Winch or Winch Motor For Raising/Lowering Roof on Rockwood Premier Pop UpIt is likely we have a motor to replace what has died. Can you offer any more information like a part number, manufacturer of the motor, etc? If you want to replace the entire winch system, then the Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs # 1120210 can be made to work with more than enough capacity to lift utilizing the pully system on your trailer.
view full answer... - Can Ignition Wire of Superwinch LT2000 Run to Main Power WireThe ignition wire of the # 1120210 is an activation circuit that normally is used when installing on an ATV to tell the winch the ATV is on and the winch is powered up. In a boat trailer install situation like you mentioned you could run this circuit to the same place as the main power wire and it will work just fine.
view full answer... - Winch To Move A 600lb Toolbox Up And Down A Trailer RampThe Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs Item # 1120210 is a perfect solution for one person to move a 600lb tool box up and down a trailer ramp. It comes with a 49' cable with latched hook, pully block, D-shackle, and roller fairlead and is protected by a relay.
view full answer...
Do you have a question about this Electric Winch?
Why etrailer.com?
At etrailer.com we guarantee:Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate electric winch information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Test Fit:
Nicholas E
Video by:
Andrew L
Updated by:
Laura H
Updated by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.