bing tracking image
  1. Accessories and Parts
  2. Tekonsha
  3. Trailer Wiring
  4. Wiring
  5. Power Wire Installation Kit
ModuLite Installation Wiring Kit

ModuLite Installation Wiring Kit

Item # 118151
lowest price pledge
Retail:$37.93
Our Price: $18.42
You Save: 51%
Accessories and Parts
Orders above $150 qualify for Free Shipping
Shipping Weight: 0.85 lbs
Quantity: 
In Stock
118151 - Power Wire Installation Kit Tekonsha Trailer Wiring,Wiring
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
This kit provides the wire to be run to the vehicle battery to power the lights on the trailer. Works will all ModuLite wiring harnesses and includes all of the connectors necessary to complete the installation of the ModuLite wiring harness. 1-800-940-8924 to order Tekonsha accessories and parts part number 118151 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for ModuLite Installation Wiring Kit. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (16)
  • Q & A (0)
  • Videos (9)
  • Photos
  • Why etrailer?

Tekonsha Accessories and Parts - 118151

  • Trailer Wiring
  • Wiring
  • Power Wire Installation Kit
  • Tekonsha

This kit provides the wire to be run to the vehicle battery to power the lights on the trailer. Works will all ModuLite wiring harnesses and includes all of the connectors necessary to complete the installation of the ModuLite wiring harness.


Features:

  • Kit Includes:
    • (1) 10 amp Fuse
    • (1) Fuse Holder
    • (8) Cable Ties
    • (1) Ring Terminal 3/8"
    • (1) Ring Terminal 1/2"
    • (1) Wire, 12 ga. 20'
    • (1) Butt Connector


118151 Modulite Installation Wiring Kit




California residents: click here


Video of ModuLite Installation Wiring Kit

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Curt Tail Light Converter Installation - 2012 Chevrolet Volt

Hi there Volt owners. Today in our 2012 Chevrolet Volt, we're going to be installing Curt's 4-Pole Flat Trailer Connector Vehicle Wiring Harness. This will provide you with all the lighting functions that you need for any accessory that you have on the back of your vehicle. So when you got your cargo carrier on there, loaded up with gear that may be blocking your tail lights, the lights on your cargo carrier can be illuminated, which includes your left-turn signal, right-turn signal, tail lamps and brake lamps, keeping your DOT compliant in all states. Now you do want to keep in mind that this harness is really for accessories on this vehicle, because it's not recommended to tow with your Chevy Volt.Located on the end of our connector, you'll find a dust cap that can be inserted on it to keep out any dirt, debris and moisture to ensure a long lasting connection. The circuits are protected by the module that's located inside.

This module has its own power supply straight from the battery. It monitors the inputs from your taillight assemblies, and then sends its own signal to our 4-pole connector to produce those lights back on our accessories. What's nice about this is that if there's any faults on the wiring, on your accessories, the module will see that and shut down those circuits. In the event it's unable to shut down the circuit in time, the powered wire that goes to our module has an inline fuse and that fuse will open so it won't affect any of the wiring that's on your Volt. And when you're finished using your wiring, you can simply wrap it up, store it inside your compartment and now it's out of sight and out of your way.We'll begin our installation at the back of the vehicle with our lift gate open and your back cover lifted up, so we can access the components here at the back.

On each side, we're going to remove the access panel. Simply just push in and that cover comes off. We'll set that aside. Now you don't really need to take your entire cover out back here, it is going to make it easier. You do have access panels for your battery, where we'll need to make some connections, but just to make it easier to route the wires, there's four nuts we're going to remove with a 10 mm socket, one in each corner.

And we can then lift this up. And you can take it all the way out if you want. We're not going to be taking it all the way out, we're just going to be lifting it up so that we can more easily route our wiring.Okay. We can now reach inside of our panels here and there will be a connector inside for your taillight assembly. We're going to go ahead and unplug that.

You can kind of see here, the wiring that goes up towards the taillight. The easiest way to find it is to just grab that wire with your hand and follow it until it meets the connector that goes into the taillight assembly. Once you get that, there'll be a release tab, you just press down and pull out on the assembly. You'll be following the shorter wire that's coming off the larger loom. Then we can pull it out and it's going to look like this. We'll be doing the same thing on the other side.We'll now take the quick splices that come in our kit and we're going to start making our connections. We'll start with the yellow and white wire on our driver's side. We're going to slide the quick splice that comes in the kit onto our wire. Once you've got that slid on, you can take the brown wire and we're going to slide it into the other side of the quick splice. This is going to be for our taillights. And then we'll use a pair of channel locks, squeeze the splice down into the wire. We can then push the cover over and lock it in place. We're now going to do the exact same thing with our yellow and brown wire, and that one's going to connect to the yellow wire off of our module. Once you've made both of those connections, you can plug your connector back into your taillight assembly.We'll then connect our ground wire to the ground stud located in that same compartment. We're going to use a 10 mm socket to remove the nut. We can then slide our white wire over the stud. Our white wire is our ground wire and reinstall the nut. Our red wire isn't used on this setup, so it must be grounded since it's not going to be used. So we're going to go ahead and pull our red wire over it, use another quick splice, slide the quick splice over the white wire and slide the red wire in. And just like we did on the other wires, we use a pair of channel locks to squeeze the splice down.To continue with the installation, you'll also need a ModuLite wiring installation kit. This is going to give you all the necessary wiring you're going to need to get your module powered by your battery. To install this kit, we'll first want to separate out our black wire from our module. It's already stripped, take the yellow butt connector from your ModuLite installation kit, crimp that onto the black wire. And the other end of your black wire is going to attach to the black wire that comes in your ModuLite installation kit. We'll connect that black wire to the other side of our butt connector. Now you won't need all the wire that comes in the ModuLite installation kit. Most vehicles have a battery located in the front, so you'll need more wire to get to those. But since our battery on our bolts here at the back, we really only need just a short piece.We'll now take the green and the black wire that's coming off of our module, and we're going to need to route those over to the other side. Now the black one, we can stop when we get about midway where our battery is, but the green has to continue all the way to the passenger side. So we're going to go around from the inside out, underneath this panel, in order to do this. We've got our black wire to the center, we'll leave that. Green wire, we want to continue on all the way till we get to the other side. Now, once you get to this side, it is going to be a little tricky. You're not going to be able to just reach your arm around there, you're going to need to use some sort of fish wire. We're going to be using a piece of airline tubing. If you don't have any airline tubing, a coat hanger also works pretty well because you can bend that and manipulate it to get it around. So we're just going to feed this until it comes out, down towards the bottom.Now that our fish wire sped through, we'll take our green wire, we're going to tape it to it using some electrical tape. We're going to be connecting it on this side just like we did on the driver's side. We'll be making our connection to the green and purple wire on our connector here. Take your fuse harness, we're going to cut it in half and we're going to strip back each end that we just cut. On one end of our fuse harness, we're going to crimp a ring terminal. And on the other end, you'll be crimping a yellow butt connector. Our battery's located right there, we'll lift up on the positive cover. You'll see a nut located there, we're going to remove that. We'll use a 13 mm socket to do that. Take the ring terminal, slide it over the post and then re-install the nut.We'll then take our black wire. I'm going to trim it down a little bit more. I do like to leave myself a little excess just in case we need it in the future for rerouting or potentially repairs. We're going to strip back the black wire and this is going to crimp to the other side of our yellow butt connector. Now insert the fuse that comes in your kit into your harness, close it up, and you're ready to now test it out. I recommend testing it out before reassembling the back of your vehicle to make sure everything's working properly and all your quick splices made a good connection. You can plug it into your trailer or into a tester like the one we have here at etrailer.com, to do that.You'll want to make sure that you have your left-turn signal, right-turn signal, tail lamps, and brake lamps. We'll take the double-sided tape that comes in the kit. We're going to affix it to the back of the module, peel off the adhesive backing, and then find a mounting place in the compartment here to put it. You could put it on the plastic pieces here. Our customer was using that to store things, so we're going to go to the metal wall back behind that and just stick it on right there. We can then take our wiring, we're just going to tuck it down in there. You can use some of the included zip ties to secure that, to keep it out of the way. As far as your 4-pole connector, this is just going to wrap up and store inside of this compartment here.With everything back in place here all set, you don't even notice that your wiring's there because it's located behind the compartment. When you're ready to use your wiring, simply open up your panel, take your wiring and drape it over the back. You just want to avoid the striker located in the middle. And now you can plug it in and get all the lightings on whatever accessory you've got plugged into your hitch. And that completes our installation of Curt's 4-Pole Flat Trailer Connector Vehicle Wiring Harness, on our 2012 Chevrolet Volt..


Customer Reviews

ModuLite Installation Wiring Kit - 118151

Average Customer Rating:  4.8 out of 5 stars   (16 Customer Reviews)

This kit provides the wire to be run to the vehicle battery to power the lights on the trailer. Works will all ModuLite wiring harnesses and includes all of the connectors necessary to complete the installation of the ModuLite wiring harness.

by:

Twenty feet of wire wasn't quite enough to make the entire run from the ModuLite to the battery in my 2000 Ford Econoline Van. It could have used another butt connector to attach the wire to the Modulite. These were very small problems as I had other wire and a connector on hand to complete the installation. Four stars for the product.

Five stars for etrailer's website and expert advice online in the form of videos, descriptions for installation, and Q&A section!

Thanks a lot!


Comments
Wonderful! Trailer lights bright!
Young D - 06/17/2019


by:

Having just bought a new Kia Soul with LED tail lights, I needed to be certain to get the correct products to properly wire my vehicle without damaging the electrical system. Local installers in my hometown were going to simply tap into the rear tail light wiring and go straight to the trailer lights.

Thanks to you guys and your helpful videos, you advised me to use the #118151 Modulite Installation Wiring Kit in conjunction with with the #119176 Wiring Harness. By doing so, the power wire to operate the trailer lights comes directly from my vehicle battery, and alleviates and/or prevents possible damage to the tail light system of my car.

I advise anyone to get in touch with the "EXPERTS" at etrailer.com for excellent advice and superior products to get the job done!!!!

Thanks,

Wayne
Prospect, KY



by:

Purchased this along with the Modulite 3wire / 2wire converter, it worked like a charm!!! Thanks for all your guidance in figuring out what we needed to get our new trailer with combined stop & turn lights to work with our new truck that had separate brake & turn signals.



by:

Product Great
Public relations Great
Support
Great
Best regards,


Comments
Great
Michael M - 04/18/2018


by:

Quality part and fast service!!



by:

Must have for converterI used this kit to run the power from the converter to the battery. It worked great and provides a 10 amp fuse...



by:

Superior products with EXCELLENT directions enclosed within each packaged unit ordered! Will definitely use this site for any related needs!!



by:

The product was just as advertised and it shipped overnight just as requested. Presently surprised by a company that not only has most of the products that they list on their website in stock but will also ship them as quickly as the customer may request them.



by:

Super fast service.



by:

Worked well.



by:

very good responds to my issue thanks a lot



by:

Installed and works great!



by:



by:



by:



by:


16
16

Ask the Experts about this Tekonsha Accessories and Parts



  • Installation of Auxillary Trailer Lighting On a 16 Foot Landscape Trailer, Behind a 2006 Ford F-150
    If you have installed a separate battery for the LED lights that you installed then you will need to use a inline fuse to protect the LED lights and battery from shorting out. I would recommend the Modulite Installation Wiring Kit, item # 118151, which has the inline fuse needed and wire for wiring the power to the lights. You will need to ground the trailer battery to the trailer frame and the lights can then be grounded to the trailer frame. I would use a 6 gauge or larger wire and...
    view full answer...
  • Trailer Lights Work, No Trailer Brakes And No Power At 7 Way Brake Pin Connector On 2001 Chevy 2500
    If your 7-Way is not factory installed then you will need to make sure the blue and red wires under the hood at the power distribution box are connected. The red wire has a ring terminal and goes to the closest positive post in the power distribution box with a 30 amp fuse installed in the fuse location nearest the positive post, for power to the brake controller. The blue wire has a plug on it that you will need to remove. You will need to run a length of Jacketed 2 Wire, 10 Gauge, #...
    view full answer...
  • Troubleshooting the 12 Volt Power Circuit of a Factory 7-Way Connector on a 2009 Chevy Silverado
    It sounds like there is an issue with the battery charge wire circuit that connects to the fuse block under the hood of your 2009 Chevy Silverado. I attached a link below to a page that shows how these connections are made. It is also possible that the fuse is blown on this circuit too, you should check your vehicle owners manual to determine which fuses pertain to the 7-way at the rear of your vehicle.
    view full answer...
  • Activating Power to a Trailer Brake Controller on a 2001 Chevy Silverado 2500
    You are correct, there are some connections that will need to be made under the hood of your 2001 Chevy Silverado 2500 in order to make the brake controller and possibly the 7-Way trailer connector fully functional. We actually have a detailed FAQ article covering the connections that need to be made. I have included a link to the article for you to view. You will want to look at Step 2 - Under the Hood. Basically, you will remove the top cover of the power distribution box, the closest...
    view full answer...
  • Troubleshooting Brake Controller that Doesnt work With Brake Pedal of 2003 GMC 2500HD Sierra
    This is a super common problem for GM trucks around the age of your 2003 GMC 2500HD Sierra. Check the third brake light fuse of the truck. This fuse blows very easily in your truck and when that circuit is dead it takes out the circuit needed to activate a brake controller with the brake pedal. An easy way to check this is to press the brake pedal and see if the brake light above the truck bed activates. If so, then this is the problem.
    view full answer...
  • Troubleshooting Trailer Stoplight Circuit Not Active on 2000 Chevy Silverado
    Check the third brake light fuse of your truck. Any time we see this issue on a GM truck with a similar year as your 2000 Silverado the problem is a blown third brake light fuse. Typically this is labeled as CHMSL.
    view full answer...
  • Trailer Brake Controller Does Not Work with Brake Pedal on a 2001 Chevy Silverado
    When a brake controller works with the manual override but not with the brake pedal that indicates an issue on the red wire. Use a circuit tester like # 40376 and test the red wire. It should show power when you step on the brake pedal. If it does not then the first thing I would check is the position of the red wire in the connector that plugs into the truck. It should be positioned like in the picture I have provided. If it is in another location then move it to the proper location. If...
    view full answer...
    Image 1 for
  • Troubleshooting No Brake Lights on 2004 Acura TL with Trailer Connector Installed
    Lets see if we can get you going. Let me know if any of the suggestions that I make sound like they will work or if you have already checked the suggestions I make here. When you checked the output at the 4-Way connector was the trailer hooked up? If so unhook the trailer and recheck the voltage. If you have twelve volts at the green and yellow connections on the 4-Way harness without the trailer connected then the problem is most likely a ground issue on the trailer side. Check all of...
    view full answer...
  • Troubleshooting Brake Controller On 2001 Ford Expedition
    It sounds like you are having problems with the brake controller on your Expedition. You will want to check your owner's manual and locate all the fuses and relays labeled for Trailer Tow, and make sure they are all installed. You can use a circuit tester like part # 40376 and have someone use the manual override on the brake controller in the vehicle to make sure you have power to the pin on the vehicle 7-way. If you are using wiring harness, make sure that extra white ground wire...
    view full answer...
  • Hot Lead Wiring, Fuse, and Fuse Holder to Complete Trailer Wiring Harness for 2011 Jeep Liberty
    We have exactly what you need! For the black wiring that goes to the battery on your 2011 Jeep Liberty (12 gauge) and the required 10 amp fuse and fuse holder, all you need is the Modulite Installation Wiring Kit # 118151. This kit includes the those components along with 8 cable ties, a couple of ring terminals and a butt connector for installation.
    view full answer...
  • Recommended Trailer Wiring For A BMW i3
    Tekonsha's Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # 119190 is a universal part and will work on most any vehicle. Though the install video we have for a BMW is on an X5, it will be much the same as what you will need to do to get it installed on your i3. In that video, they also use the ModuLite Installation Wiring Kit # 118151, which I do recommend as it has everything you need to get the wire run up to the battery properly.
    view full answer...
  • No Power to Trailer Brakes with Brake Pedal on a 2006 Chevy Silverado 2500HD
    I believe I know what is going on with your brake controller on your 2006 Chevy Silverado 2500HD. But first a note on brake controllers. Brake controllers are not vehicle specific. Some trucks do have an option to plug a brake controller in directly and the harnesses used are vehicle specific. But the brake controllers themselves are not. Your 2006 Chevy Silverado is a model that can have a brake controller plugged directly into it. I do not know which brand brake controller it is that...
    view full answer...
    Image 1 for
  • Brake Controller Quit Working On 2005 GMC Sierra 2500HD
    I would check the power distribution box under the hood of your 2005 GMC Sierra 2500HD . The box is located under the hood and on the inside of the drivers side fender. Remove the cover, and locate the two auxiliary power posts on the inboard side of the box. The post closest to the rear of the vehicle should have a red wire attached to it. Next to this post in the fuse box there should be a green 30 amp fuse installed. If the fuse is not installed or is blown, or this red wire is not...
    view full answer...
  • Troubleshooting Trailer Pulling Too Much Amperage Blowing Fuses on 2012 GMC Sierra
    The best option to avoid blowing fuses on your 2012 GMC Sierra is the Tekonsha Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # 119190KIT. This harness provides a maximum 16 amps for the tail light and 4.2 amps per stop and turn signal circuit. This harness installs on the truck and you will use the tail light wires from the factory 7-way to connect to the input wires on the harness. Then run the out put wires to the tail light wires on your 7-way. There's also an optional...
    view full answer...
  • Troubleshooting Brake Controller that Only Works with Override Lever
    Is the brake controller a proportional brake controller? If so, then it is working fine and you should try testing it with a trailer. A proportional controller has to sense deceleration for it to activate trailer with the brake pedal. If it is a time-delayed controller it sounds like the brake controller itself isn't working properly based on what you described. Testing the brake controller is fairly easy. Sever the blue brake output wire near the brake controller leaving enough room to...
    view full answer...
  • Troubleshooting Brake Controller not Working on 2006 GMC Sierra
    There are a number of troubleshooting steps you can undertake in order to try and determine what the issue is with the brake controller on your 2006 GMC Sierra To test the brake controller itself, sever the blue wire a couple inches from the back of your controller. Then use a circuit tester such as # PTW2979 to test the end of the blue wire coming out of the controller. It should only have power when you apply the manual override; if it shows power at idle then there is an issue with...
    view full answer...
  • Recommended Wiring Harness for 2016 BMW X1
    I recommend the ZCI wiring harness # 119250KIT for your 2016 BMW X1. This universal harness will not require you to splice into your wiring like other kits will. What's really neat about this harness is the Zero-contact interface sensors identify the current flowing through each wire. I have linked the instructions for the ZCI to this page for your convenience, because this is not a custom fit application they will not be specific to your 2016 model but they will help walk you through...
    view full answer...
  • How to Wire up Trailer with Separate Turn Signals from Stoplights to Work With Vehicle with 4-Way
    Does your trailer have brake lights that are separate from the turn signals? If so you would need the converter part # RM-732 to split the signal up and allow your taillights to function properly. This would install on the trailer's wiring.
    view full answer...
  • Recommended Trailer Wiring Harness for a 2012 Porsche Cayenne
    If you currently have no wiring at all on your 2012 Porsche Cayenne I recommend installing the # 119190KIT wiring harness. It's a 4-way trailer connector that hardwires into the Porsche's wiring. It has circuit protection to keep from damaging the wiring of the Cayenne. To make the insall easier add # 118151 which is the wire that runs to the Porsche's battery to supply the power. This way the power isn't drawn from the lighting system but rather directly from the battery.
    view full answer...
  • Can Access LED Truck Bed Lighting System # A70380 Be Wired to Camper Shell Wiring
    LED type lights such as the Access LED Truck Bed Lighting System # A70380 are a great way to add more light to your camper shell or to replace an existing light. LEDs are super-efficient and require very little power, yet they provide fairly bright light output. You can wire this in as a replacement or simply add it to your existing lighting set-up. The waterproof A70380 includes an adhesive backing for easy press-on installation wherever you need the light. It also has a power switch....
    view full answer...
  • Trailer Wiring Harness for a 2006 Mercedes C230
    The only trailer wiring harness I recommend for your 2006 Mercedes C230 is the ZCI harness # 119250KIT with installation kit # 118151. This harness does not require splicing into the vehicle wiring so your vehicle's sensitive wiring and electrical system will be protected. There isn't a plug and play type of harness for this vehicle so the ZCI harness is your best option.
    view full answer...
  • Troubleshooting Trailer Dim Lights When Connected to 1987 Winnebago RV
    I agree with your assessment. It sounds like there isn't a strong enough signal coming from your Winnebago. This could be a power issue or a ground issue. I recommend checking your ground connections to make sure they are bare metal to metal and free of any corrosion or debris. If that doesn't solve your issue, you may need to use a powered tail light harness like the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness with 4 Pole Trailer Connector # 119190 along with...
    view full answer...
  • Trailer Lights Not Working After Install Wiring Harness on a 2014 Kia Sorento
    To determine if the problem is with the vehicle or the trailer, first disconnect the trailer from the vehicle. Then use a circuit tester like # 40376 or the one that came with # 119147KIT. Test the pins on the 4-Way using the circuit tester while someone sites in the vehicle and runs through the functions. If all the signals are correct on the 4-Way when you test it then the issue is on the trailer. But if the signals are not correct then there is a problem with either the wiring harness,...
    view full answer...
  • Can Optronics 55-Watt Halogen Light # QH16CTS Be Wired into Reverse Lights of 2013 Ford F-150
    It is possible to wire an auxiliary light such as the Optronics 55-Watt Halogen Light # QH16CTS into the reverse light circuit of a vehicle. In order to do so the circuit must have the current capacity for both the OEM bulbs and the additional light. I researched in the online manual for your 2013 F-150 the bulbs used and the fuse rating for the reverse light circuit. The truck uses two 921 bulbs, each rated to draw 1.3 amps. The two bulbs together will draw 2.6 amps. This circuit is protected...
    view full answer...


< Previous
123. . .4



Do you have a question about this Accessories and Part?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality accessories and parts for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate accessories and part information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew K
Video by:
Andrew K
Employee Dustin K
Video by:
Dustin K
Employee Nicholas E
Test Fit:
Nicholas E
Employee David F
Test Fit:
David F
Employee Cole B
Installed by:
Cole B
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.