bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118304
Retail:$73.64
Our Price: $49.01
You Save: 33%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $50 qualify for Free Shipping
Shipping Weight: 1.09 lbs
Quantity: 
In Stock
Tekonsha Trailer Hitch Wiring - 118304
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter. 1-833-496-1390 to order Tekonsha custom fit vehicle wiring part number 118304 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (340)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118304

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily - no cutting or splicing of wires
    • Locate connection points behind tail lights
    • Plug in T-connector
  • Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 4.2 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness.


T-One Connection Location Points Behind Tail Lights

Once installation is complete, the 4-way flat connector will be stowed in the jack storage compartment of your rear cargo area.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


Tail Light Converter

A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.



118304 Tow Ready T-1 T-Connector - 4 Wire

Installation Details 118304 Installation instructions

This Product Fits The Following Vehicles



California residents: click here


Customer Satisfaction Score:


Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118304

Average Customer Rating:  4.9 out of 5 stars   (340 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.

by:
2004 Toyota Sienna

This wiring harness worked perfectly for my 2004 Sienna with a towing package.




by:
Toyota RAV4

Wiring harness for my RAV4 Hybrid was a cinch to install. Kit included all the parts needed, plus sufficient wire to connect to my battery.




by:
2015 Toyota Sienna

2008 Toyota Sienna LE 8 passenger, FWD, stock.
Hitch, perfect fit! Wiring harness, perfect length. Time, about 2 beers on an empty stomach.

Tools: you will need a metric socket set.
10mm to remove the rear plastic cover in the trunk (for the wiring harness kit installation), 19mm to install the bolts that secure the hitch to the van. Follow the instructions or [online] it... one can do it... but two is always better than one... unless you two don't get along, then go at it alone...

You may/will also need a drill, heavy duty sheers or hacksaw. Some sort of liquid rust fighter, a pry-bar, various chunks of wood.

Basically, I bought 4 HDX 1/2" fitting brushes from [online] for $x.xx a piece, nipped the handles off, and put them in the drill. Going in the forward direction only (if you set the drill in reverse in an attempt to back out the brush it will literally unwind and come apart), I sprayed rust breaker on the brush and used them to clean out the holes for the bolts. The bolts are metric and a fine thread (meaning the grooves are more shallow than coarse threads, there are more groves, and they take more to clean out, coarse seems to be more forgiving when rusted.).

I used all four brushes to clean out the six holes. As my vehicle was bought used, it had no plastic rear cover so the threads where corroded. The pry-bar and wooden blocks where to hold the exhaust tube out of the way (pry the bar to the side, use the blocks to hold it.

Once the threads are cleaned out, it's a snap. It would be a good idea to put a little anti-corrosion on each bolt before installing (good habit to have.)

Installed the wire harness kit from etrailer. Loved it, would recommend getting some wire protector sleeves and sliding this over the wires for longevity protection. This would prevent the vibrations from driving down the road from wearing through the wires insulation and causing a potential/eventual short circuit...(etrailer.... why don't you offer a protection kit for a few bucks more.... one stop shop hint hint.... I'd pay extra for the convenience and also if it came with more zipties...zip ties.... a lot more zipties..)


Final thoughts: it is my intention to do the following... if you [online] "Michael Byrne air loft review" he has a 2015 dodge grand caravan I would copy.
Install ceramic rated rotors, and ceramic brakes for heavier hauling.
Install air lift helper springs from etrailer... would love to get the compressor kit, but cannot justify the cost of convenience... according to Michael Bryne, the included air hose didn't like the cold and flexing and failed... (so if you live in the cold ranges, due dilligence is probably a good idea).... Thus the airbags collapsed and pinched and tore the bags. He recommends upgrading the air hose to a braided line. I think I will do this, and route it into the van to a T-fitting. Then use the included line to run up to the driver seat before putting in another T-fitting in.. one side will supply a pressure guage that I can see as I drive daily and monitor for low pressure... the other will go the fill nipple located nearbye... That way I can use an air compressor that I already have that runs off of the cigarette port to fill it, and see my pressure from the same spot, that I monitor... (Why etrailer doesn't offer an add on kit of more hose, fittings, and a pressure Guage with a mount kits is beyond me... hint hint... take the idea etrailer... ask $XX extra bucks, one stop shop, and its a heck-of-a better bargain than a $XXX basic compressor kit.... some of us dont need fancy, we need practical)....

I also plan on upgrading the suspension to a beefier, stiffer suspension, as the van tends to be a little soft when loaded down. I put in Monroe load adjusting shocks and KYB quick struts and looooooved them when I had my grand caravan... also had put on 4 all weather tires that roooocked in the snow from tires plus... they where quiet...

I know, I know, why not get a suburban? Sliding doors, that's why, sliding doors = no door dings caused by my children.... it's lower to the ground so my little ones can get in without the risk of falling and cracking their heads on pavement... that and the 24mpg... and it's paid for... and it's a toyota.... plus.... who wants to steal a minivan...


Comments
You brought up several good points in regard to the hitch and the harness. We recommend cleaning out the bolt holes thoroughly before beginning he installation. While we do not have a ready made kit we do have wire loom, part # 7509-10
Wire Loom 1/4" Diameter, 10' Long
$8.63
, and zip ties part # DW05727-10
Deka Cable Ties Kit - UV-Resistant - Black - 50 lb Tensile Strength - 14" Long - Qty 10
$2.11
available. The idea of a hose kit with a gauge is a good one.
-- Etrailer Expert Jenny N - 02/25/2022


by:

I wish I could recommend this product, however after using it just a couple of times, it stopped working and I had to pull my trailer at night with no lights at all. I’m not quite sure what to do with this point.


Comments
The most common reason for the wiring harness to stop working is the ground. You want to make sure the ground has a clean connection to a bare metal surface. The other common issue is the converter box is defective. You can test it pretty easily with a circuit tester like part # PTW2993
Hook Probe Circuit Tester
$14.49
by testing for voltage on the input side of the box when the taillight circuits are applied and then testing the output side as well. If voltage is making it to the box but then not to the other side the issue is internal of the converter and it would need to be replaced.
-- Etrailer Expert Heather A - 04/08/2022


by:

Fast shipping, perfect fit and has functioned well over the last year. It really gave us a lot more adventuring options as a family with a van. The only thing to watch for is if you are installing this on an older vehicle with a pre-drilled/threaded frame for a hitch is that you may need to run a tap through it to clean out the corrosion out of the threads. A small economic investment that really added a lot to our vehicles capabilities.




by:
2006 Toyota Sienna

I didn’t think that installing a wiring harness would be a DIY project. It was easy to install with the video and worked perfectly.




by:

As described, great price, perfect fit, faaast delivery! I ordered from etrailer before and will definitely order from them again!




by:

This harness was easy to install and solved an issue that I could not diagnose with my old harness.




by:

Wiring harness was a breeze to install. Works great, no problems.




by:

The items arrived earlier than expected. The hitch an electric install was smooth. If needed, I will definitely order from etrailer again.




by:

Excellent quality as always




by:

90's ford's were easier, hi quality and under 30 minutes to install




by:

Super easy to install, the instructions are well written. This makes the process of wiring up the trailer lights very simple!!




by:

Fits perfect. Allways retorque your mounting bolts after the first real tow. All but one of mine were good!




by:

Working as needed and expected.




by:

This wiring harness was so simple to install. Took about 30 minutes start to finish.




by:
2008 Toyota Sienna

Perfect fit. Online install demo was great, but there is a better way to route the trailer plug to the outside for a more permanent, and out of the way, factory install kind of look .




by:

Fast shipping, easy install, great prod uct




by:
2004 Toyota Sienna

Superfast shipping and fits perfectly!!




by:
2011 Toyota Sienna

Awesome product and even better customer service. I’ll be using etrailer again.




by:

Easy to install and has lasted well. Not big on the loose wire just hanging out but I understand there aren't many options.




by:
2004 Toyota Sienna

I bought a hitch, stinger, ball and wiring harness for my 2004 Toyota Sienna. It was delivered fast, it was the right stuff, and it fit, just like it was supposed to. It really was as easy to install as it looked in your video. The video was immensely helpful too. The video showed me exactly what I needed to know to get my hitch installed correctly and it gave me the confidence to order online and do it myself. The only drawback is a loss of ground clearance but you warned me fair and square up front about that, so I can hardly complain. Thank you, that was a good investment.


Comments
Still working flawlessly.
Todd C - 08/05/2018


by:

Great direct bolt product no
For anyone
with an old vehicle, I suggest buying the next size up bolt retapping the bolt holes larger then installing to the correct torque.

I stripped all of my threads out on 5/6 of my bolt holes




by:
2007 Toyota Sienna

Kit came with good instructions and pictures of the installation of the specific car itself, not just some generic pictures. Length of the wires are generous and allowed some flexibility of routing and location of the unit. The plugs snaps solidly into their respective places. Everything works like it should before the car panels and tail lights were put back into their places. Great product! Along with the Curt hitch bar, now my 07 Sienna is ready to tow a boat.


Comments
Been a year with lots of use, launching boat in both fresh and saltwater and the wiring is working great!
Lou. - 07/16/2015


by:
2005 Toyota Sienna

My order come around 1pm..to my local post office. I live about 3 minutes ups pick the package never move .i tracking my order..first order and bad experience. Shame



25
340
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Will Trailer Wiring Harness 118304 Work with LED Trailer Lights and a 2004 Toyota Sienna
    You should have no problems using wiring harness # 118304 on your 2004 Toyota Sienna to tow a trailer with LED lights. With this harness, the vehicle wiring powers the trailer lights. LED lights have little draw compared to incandescent lights so they will not overload the system and the lights should work great. I have included links to the installation instructions and a video showing a typical installation for you.
    view full answer...
  • Recommended Wiring Harness and Installation for 2008 Toyota Sienna with Tow Package
    Sounds like your factory wiring harness was damaged and you are looking to replace it with a new wiring harness. TowReady T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118304 is the correct wiring harness for your 2008 Toyota Sienna. Take a look at the installation video that I have included which shows the installation of # 118304. The 4 pole connector is designed to hang out the bottom of your back cargo door. I can't say whether the harness will fit through the grommet...
    view full answer...
  • Trailer Wiring Harness Recommendation for a 2007 Toyota Sienna
    We sell trailer wiring harnesses for your 2007 Toyota Sienna, but we do not carry any converter boxes that we could recommend to replace the factory Toyota converter box. For trailer wiring you would want the part # 118304. I also attached a video that shows how to test a converter box for you to check out before you but a new harness.
    view full answer...
  • Troubleshooting Trailer Wiring Harness that Stopped Working Totally After Blown Fuse
    It sounds like you may have damaged the converter box of the part # 118304 when you blew the fuse and now it's not functioning properly. What you can do is test for voltage going into the converter box and then test for voltage on the output side to see if the voltage is in the correct places. If voltage going in looks good but not coming out then the box is bad. Before you replace it you will want to inspect the wiring of your trailer to see if you can find anything that would cause...
    view full answer...
  • How is Trailer Wiring Connector Used with Trailer if it is Stored in Rear Hatch
    A trailer wiring harness like # 118304 for a 2008 Toyota Sienna is generally stored in the rear cargo area and then draped through the seam of the rear hatch, like you said, when in use. The hatch seal is padded enough to protect and not damage the wiring. It's generally considered to be safer for the wiring to store it in the rear hatch because it isn't exposed to the elements when not in use.
    view full answer...
  • Does T-One Vehicle Wiring Harness 118304 for a 2008 Toyota Sienna Connect to the Battery
    The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Item # 118304 does not require a connection to the battery on your 2008 Toyota Sienna. It just plugs in line with the vehicle tail light wiring and gets grounded to a bare metal surface. I have linked a video showing an example installation for you.
    view full answer...
  • Troubleshooting Tow Ready Trailer Wiring Harness # 118304 Installation in Toyota Sienna
    Thank you for your recent purchase. The two plug-and-play trailer wiring harnesses you have, Tow Ready part # 118304 for the Toyota Sienna, and # 118301 for GMC/Chevy and Isuzu pickups, both install inline with the pre-wired T-connectors to the vehicles' tail light wiring. The problem with erratic light functions that you describe is most often related to a grounding issue. You can begin your troubleshooting by confirming that the white ground wire with ring terminal is firmly secured...
    view full answer...
  • Trailer Wiring Harness Recommendation for a 2014 Toyota Sienna
    Most modern vehicles have more delicate taillight circuits than older vehicles. The wire that runs to the battery is used to protect the taillight circuits of your vehicle from being overdrawn by the additional load of the trailer lights. Trailer wiring harness with a wire that runs to the battery use the vehicle battery to power the trailer taillights and then only use the taillight circuits as signal wires. I can't recommend you install a wiring harness on your vehicle that doesn't...
    view full answer...
  • Trailer Lights Not Working with 2008 Toyota Sienna with Never Used Tow Package Wiring
    Since you have not used the trailer wiring harness on your 2008 Toyota Sienna until recently then there are a couple of likely things happening. First, the pins on the vehicle side connector could have corrosion in them even if the harness was stowed away the whole time. that can happen to untreated metal. Using a wire brush or screwdriver to clean out the metal contacts will help. The other thing to look at is the ground connection. This is usually a white wire. It needs to be connected...
    view full answer...
  • Which T-One Trailer Wiring Harness Fits a 2004 Toyota Sienna Van?
    The T-One is a custom fit wiring harness, but part number 118381 will not fit your 2004 Sienna Van. This harness is custom fit for a full-sized Dodge van. We do offer a custom harness for the Toyota Sienna Van, the T-One wiring harness you need is part number 118304. For your convenience, I will attach links to the referenced products, a helpful FAQ wiring page and an installation video for the 2004 Sienna.
    view full answer...
  • Hitch Recommendation for a 2004 Toyota Sienna Towing Small Trailer
    For a hitch for your 2004 Toyota Sienna that will allow you to do some towing I would recommend the Hidden Hitch part # 87415. This is a Class III hitch with plenty of capacity that would work great for you. I attached an install video for you to check out as well. This hitch has the capacity for towing your small trailer and lawn mower, but you will also want to check the owners manual of your vehicle to determine the towing capacities of it as well and be sure to go with the lowest rated...
    view full answer...
  • Turn Signal on 2004 Toyota Sienna Hyperflashes with Brake Pedal with Wiring Harness 118304 Installed
    First let's make sure that everything is hooked up properly. The red and green wires on harness # 118304 will go to the passenger side and the yellow and brown go to the driver side. If those were swapped it could cause some issues. Also make sure that the white ground wire is attached to a bare metal surface. Moving the ground could help. Ground problems can cause all sorts of weird things to happen. To determine if the converter box is bad, you will need a circuit tester, # PTW2993,...
    view full answer...
  • Faulty Left Directional and Brake Lamp on Trailer Towed by 2004 Toyota Sienna
    In order to diagnose the problem, you will first want to test the trailer connector on the Sienna. Use a circuit tester like part # 40376. Check the socket that corresponds with the yellow wire which carries the drivers side brake and directional signal. If you get a signal at this location with both functions activated, the problem exists somewhere on the trailer. Start at the connector on the trailer, inspect it for damage or corrosion and replace or clean if necessary. Trace that yellow...
    view full answer...
  • Wiring Harness, Sensor, and Electrical Problems After Installing a Spliced Wire Harness on a Toyota
    The item you selected, T-One Vehicle Wiring Harness, part # 118304, will work on your Toyota. There is another harness that will protect the vehicles circuits, the Upgraded Heavy Duty Modulite Circuit Protected Vehicle Wiring Harness, part # 119190KIT. This kit only draws .5 milliamps from the vehicle lighting system and uses a circuit protected modulite that is a safe guard from short circuits or wiring shorts. Part # 119190KIT draws power directly from the vehicle battery, and only...
    view full answer...
  • Trailer Brake Lights/Turn Signals Not Working After Installing Wiring Harness on 2006 Toyota Sienna
    To determine if the issue is on the trailer or the 2006 Toyota Sienna you will first disconnect the trailer from the van. Then use a circuit tester such as # PTW2993 to test the vehicle side wiring. First test the wires going into the converter box on harness # 118304 from the vehicle. Have someone sit in the cab and run through the light functions while testing the wires. If there is no power on the input wires for brake lights or turn signals, then there is something wrong with the vehicle...
    view full answer...
  • Trailer Wiring Harness for a 2009 Toyota Sienna
    Neither of the trailer wiring harnesses for the 2009 Toyota Sienna require a direct connection to the vehicle battery. Both Tow Ready harness # 118304 and Curt harness # C55580 plug in line with the vehicle tail light wiring and the only other connection that needs to be made is the ground wire. Some vehicles require a powered converter if there isn't a plug and play type of T-connector available or if the wiring is suspected to not be able to handle the power draw without a powered converter....
    view full answer...
  • T-Connector Trailer Wiring Harness Keeps Blowing Brake Light Fuse on 2007 Toyota Sienna
    It is possible that the trailer lights have more draw than trailer wiring harness # 118304 can handle. It is rated for 2.1 amps per side for brake lights/turn signals and 4.2 amps for running lights. Your friend's truck is likely rated higher so it can handle the draw. If this does turn out to be the problem then switching to LED lights would solve the issue. The other option, since this is a recurring issue, is to replace the T-connector harness with a universal, powered harness that...
    view full answer...
  • Trailer Hitch and Wiring Recommendation for 2007 Toyota Sienna
    The best fitting and best priced hitch we offer for your 2007 Toyota Sienna is the Draw Tite part # 75237 which is a confirmed fit. This hitch has more than enough capacity for a jet ski trailer as well. I attached an install video for that for you to check out as well. For trailer wiring you then would want the part # 118304 which is confirmed as a fit and is the most reliable option we have. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900....
    view full answer...
  • Troubleshooting 2008 Toyota Sienna With Trailer Running Lights Not Working
    There is not a separate fuse in the wiring harness itself. Normally for the functions like stop and turn to work but the running lights not to work is a bad ground wire connection on the vehicle or the trailer. Running lights stay on, so they draw more current than the other functions. Check the wiring harnes ground wire (normally white) where it attaches to the vehicle and make sure you have a clean metal to metal connection. Also check the trailer ground for the same. Any corrosion,...
    view full answer...
  • Trailer Brake Lights Not Working when Connected to a 2006 Toyota Sienna
    You can test trailer wiring harness # 118304 to determine if it is the problem or if the issue is somewhere else. You can use a circuit tester such as # PTW2993 or a meter if you have one to perform this test. Have someone sit in the vehicle and press the brake pedal. At the same time test the pins on the 4-Way, specifically the 2 that are the furthest from the exposed ground pin. If you are not getting power there when the brake pedal is pressed, then make sure your stoplight/CHMSL fuses...
    view full answer...
  • Best Trailer Hitch for 2007 Toyota Sienna
    To tow a trailer with your 2007 Toyota Sienna, the best hitch is going to be the Class III Draw-Tite # 75237 over the Class III option from Curt because the Draw-Tite is rated for a higher capacity and is also the more economical choice. This hitch has a 2" receiver and 4,500 lb towing capacity, which is 1,000 lbs more than the capacity of your Sienna though please be sure to adhere to the 3,500 lb capacity of your vehicle. You are also gonig to need to add a 4-way connector # 118304 to...
    view full answer...
  • Recommended Trailer Hitch and Wiring for 2005 Toyota Sienna
    I do have a great option for you, however the Draw-Tite Max-Frame Trailer Hitch Receiver # 75278 referenced in your question will not fit your 2005 Toyota Sienna. This particular hitch is designed for certain model Pontiac, Chevy, and Buick vehicles and will not line up with the frame of your Sienna. For your vehicle, I instead recommend the Draw-Tite Class III Max Frame # 75237. This Class III hitch is confirmed to fit your 2005 Toyota Sienna and will use existing holes in its frame...
    view full answer...
  • Troubleshooting Trailer Wiring of 2009 Toyota Sienna with No Stop/Turn Circuits
    It sounds like a converter box issue on your setup. Can you test for voltage feeding into the box and coming out of the box? I'd be willing to bet you'll find it's going into the box fine but not coming out which means it has an internal short and would need to be replaced. We've found that the most reliable trailer wiring brand is Tekonsha so I would recommend replacing what you have with the part # 118304.
    view full answer...
  • Best Trailer Hitch for a 2010 Toyota Sienna
    I do have a trailer hitch for your 2010 Toyota Sienna but the one for a Toyota Venza will not fit as the vehicle's have a different rear subframe so the holes will not line up unfortunately. For your Toyota Sienna, I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75237 because it has the highest weight capacity of any other option for your vehicle and it has an integrated trailer connector bracket. The Draw-Tite Max-Frame Trailer Hitch Receiver is also a custom fit...
    view full answer...
    Image 1 for


< Previous
123. . .4



Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Jackie C
Expert Research:
Jackie C
Employee Michael H
Expert Research:
Michael H
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Jacob T
Video Edited:
Jacob T
Employee Sue W
Video Edited:
Sue W
Employee Joshua S
Video by:
Joshua S
Employee Kathleen M
Video by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.