To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.
Features:
Specs:
Tail Light Converter
A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (1105 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.The hitch is compatible to Honda CR-V (model 1998) and apparently fits well. One must be careful to adjust the exhaust system and check the engine rotation for smooth operation, otherwise it could produce noise. The electrical wiring is easy to install with little effort. My purpose is specifically to haul garden and landscaping items and this is a worth spending.
On '93 Honda Pilot, installed wiring harness in about 20 minutes. Also installed Draw-Tite tow bar (75599) and Tow Ready 4-Flat Universal Mounting Bracket (118149) to stow wiring harness plug. None of the wiring harness is visible from rear of vehicle with only 4 - 6 inches underneath. All of the wire is tucked away in rear threshold where I found two grommets leading underneath the vehicle. After cutting out a space in the grommets for the wire harness to run I reinstalled grommets back into place. Very neat install, wire is snug behind threshold where plug was located. Worked as advertised.
No issues what so ever just plug it in and ur good
Arrived on-time. Installation instructions were easy to follow. Wiring harness was super easy. Just towed a 5,000 lb trailer from Home Depot to my house. Saved $200 since I was able to tow it myself.
Easy installation, works great. Very satisfied with the wiring harness.
I had an old wood stove that needed to be transported to the metal scrap heap at the local landfill. The hitch and drawbar were already in my possession but I needed trailer wiring for a rental trailer. I looked at the trailer rental store's offering of a generic harness that involved splicing as part of the installation process; I suppose it would work just fine but this product seemed to be much easier to install. After the removal of three trunk lining fasteners I had access to the wiring plug that is standard issue for my Honda. I connected the etrailer mating half of the plug to the Honda plug, fussed with the location of the "box" and the wiring a little and I was done except for verifying with a voltmeter that all the functions were working. When not in use the bulk of the wiring is hidden in the spare tire well underneath the trunk floor panel. This harness works just fine on my 2000 Honda V6. I'm happy.
As advertised, fit an '03 Element perfectly. hardest bit was getting at the vehicle connector, which is behind interior body panels for some reason (in this case, passenger side rear. On 2005 models and after there was a design change, you may want to look out for that). Routing the wires for easy access was straightforward as well. etrailer shipped quickly and item arrived well before expected.
The trailer wiring harness worked perfectly. Getting the panels off my Honda Element was a job but the wiring harness worked as intended.
I didn't have to pull off the rubber door gasket but I did have to remove the plastic piece across the back which broke the plastic fasteners. I think I needed a Phillips screwdriver and 10 mm socket wrench. I used the double stick tape that came attached to the module and didn't bother with the screw, where it is located I don't think is going to move. There is a cigarette lighter socket that should be removed before pulling the panel out but even without taking that step it wasn't hard to straighten the tabs and plug it back in to the connector. About a 20 minute job, not difficult.
I installed the 4 pin quick connect harness and the ETBC7 universal 7 pin kit on my 2006 Honda Pilot EXL to get it ready for towing our popup camper. The instructions are clear and the installation was fairly easy but did take over 4 hours start to finish. Connected to a tekonsha voyager BC taken from our old tow vehicle. The installation looks professional, I know it was done right, and saved about $200.
Etrailer best company I have ordered from in years. Order arrived instantly and is exactly as depicted online. Company defined product to match my vehicle in easy terms. The Tekonsha custom fit trailer harness is one snap connection and done. My vehicle tail lights are working again and trailer lights. Thank you.
Exactly as promised, plugs right into the car's wiring harness (for us that's a 2000 Honda Accord). No fuss, very easy to do. Will take you five minutes tops and two of those will be just gently removing the plastic fasteners holding the trunk's lining in place.
The wiring harness has served us well over the past year. installment was a relatively simple task. the online video was spot on and was all I needed to feel confident to handle the install. Very good product, worked first time and every time nad it is only surpassed be the thorough support from etrailer.com team :)
Items were packed pretty well, nothing seemed to have moved or been damaged during shipping. Part fit as good as OEM, all hardware was correct and the harness fit perfectly.
This hitch was exactly as advertised and fit my CRV perfectly!!! Used spray bottle with soap & water to lube the two upper muffler rear hangers and they slid off with little prying needed (did not need to remove the lower hanger in front of muffler). etrailer's installation videos for installing both this hitch and corresponding 118336 wiring harness were spot-on and very helpful (also a good video on the Curt website). Took my time tightening the hitch bolts to specs which was a bit awkward until I thought to use my ratchet extension bars. Maybe the easiest "car repair" I've ever done, and probably saved a lot of $$$ doing it myself. If you can change your oil, you can do this installation no problem! Also, etrailer promptly shipped this product for free (thanks, guys!) and it got here a day early. GREAT COMPANY! When I save up enough to buy roof rack rails in the near future, I'll be back...
The trailer wiring harness was a great solution and I have attached some pics of how i ran the wires for the installation. I found some access holes in my 03 Honda Pilot to avoid pinching the wires in the liftgate.
We have 4 CRVs and 1 Pilot all rigged with the base plate. Good product. Never an issue. The most recent purchase was for the Pilot. No problems for installation and use. Install on Pilot was a little more difficult not because we weer also installing Transmission cooler- but no issues.
etrailer has been amazing to work with. Their customer service is top notch! I recently had to return an item and they made the process so easy. I will continue to shop with etrailer for all of my needs. Thanks etrailer!
Fastest delivery I have ever had. Ordered Wednesday at 5PM, arrived Thursday at 3PM. I'm only a couple hundred miles from Wentzville, but still, excellent. The hitch receiver (2008 Pilot) installed quickly and easily. No need to remove spare or lower muffler. I supported the left end on a large cooler and quickly maneuvered the right side above the tail pipes. The mounting holes were right on target. I had to tap mine to remove rust, but that's easy as well. The wiring harness was also a snapto install. Simple to plug into existing fitting and the wiring box tucked away nicely beneath the trim as advertised. There are options about what to do with the wiring tail and trailer connector. I chose the method shown in the video...leave it rubber-banded in the storage well. Others have run it outside through available holes, but I did not want to leave it exposed to road grime. etrailer's videos were very detailed and shown on my specific vehicle for both the hitch and the wiring harness. Good values as well. If I were Draw-Tite (or Curt) I would include a complementary rubber plug with their logo...cheap advertising.
T one wiring harness was easy to install, and works very well. Good product
Haven't fully tested it, but installation was easier than anticipated. I recommend watching the video for options for routing the wires to the storage compartment in the CR-V. I cut a small slit in the corner, closest to the bumper, of the storage compartment and pulled the wires through. Honda provides a great place to store the wires! -A.
Product is exactly as described. Just plug it in to your existing harness wiring and bingo, you now have a four flat plug for your trailer. Works perfectly.
Everything went smoothly and with no issues. Install was straightforward with no snags. Now my daughter can use her Honda Element to tow a small trailer or go on whatever adventures she now wants.
Had weird acting trailer lights for quite awhile. When I checked voltages at the vehicle I noticed low voltages for one of the TS. I suspected the 4 way adapter that was installed in 1999 Odyssey. I purchased this one from eTrailer, hooked it into the van and it fixed the issues. The trailer lights are now rock solid. I guess the TS converter on the old one had an issue. All is well now.
The instructions were dead on and very simple to install. This is my second vehicle to use a Tekonsha wiring harness. It will be the only brand I'll use in the future.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.