bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Powered Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118460
lowest price pledge
Retail:$100.51
Our Price: $53.27
You Save: 47%
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 1.65 lbs
Quantity: 
In Stock
Tekonsha Custom Fit Custom Fit Vehicle Wiring - 118460
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. 1-800-496-5010 to order Tekonsha custom fit vehicle wiring part number 118460 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (59)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118460

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Powered Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points in rear cargo area
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 2.1 amps per circuit
    • Tail lights: 4.2 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118460 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118460 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118460

Average Customer Rating:  4.9 out of 5 stars   (59 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

by:

not a bad little deal, everything fit good! went by youtube vid took me about 5 hours all total plugged ln trailer everything worked!!!! .did not have a lift ,so could have been much quicker, will definitely buy more stuff from etrailer if needed!




by:
2009 Toyota Matrix

I've purchased many hitches with wiring and each time I've received excellent service.




by:
2012 Scion xB

Bought May 2021. Worked as designed. I installed in a 2012 Scion xB. I sold the car a few months later so I can't give you long-term review, but I never had an issue while towing.




by:

easy to follow instructions. works as d escribed.




by:

Probably not this product's fault, but the biggest pain was running a line to the battery.




by:
2009 Pontiac Vibe

Good unit and the video made the install fairly easy. The hardest part was running the power wire from the battery to the taillights inside the car. Heres a tip. To get the wire into the engine compartment look under the dash on the drivers side. The rubber grommet for the main wiring harness has a small hole located in the 4 Oclokish position. Push the wire through that hole. In the engine compartment look for what looks like a small rubber tube with a rubber cap on it which is part of the grommet. Cut the rubber cap off and push the wire through. To run the wire to the back, place it under the kick panels all the way to the back (this is the same way the tail light harness is routed.). I could probably do it now in about 1/3 of the time having done it once. Good Luck!!


Comments
Hey patrick,Everything is working like a champ - no issues.Keep up the good work.
Paul D - 07/11/2014


by:

Still working a year later.




by:
2013 Scion xB

This kit and the online video made wiring up my 2013 Xb a piece of cake. Top quality components, clear & concise instructions and prompt, professional service at a great price. Worth every penny!

Thanks, etrailer!!


Comments
Hi Patrick, and happy new year!Im as pleased with the wiring kit now as I was initially. Its clean, neat
Dave M - 01/23/2015


by:
2012 Scion xB

purchased hitch and wire harness , hitch says 1/2 hr had it on and done in less than 15 min .Very easy to install. Wire harness was easy as well just when you run you hot wire from the rear to the battery, start at the battery it's kind of hard to run the wire from under the engine to the top with all the wires and stuff trying to fish through it all when you can just drop it down and start zip tying everything .Did all mine in the drive way and it only took an hour. Love the plug and play w/the lights.
Thanks Etrailer
Coleman




by:
2006 Toyota Corolla

This wiring harness was easy to install and has held up just fine after one year. One thing to complain about is the double sided tape that is provided didn't hold up after one year....but If that's all I have to complain about - I say that I got a pretty good product. Thanks.




by:
2012 Toyota Matrix

T-One Wiring Harness w 4 Pole Trailer ConnectorT-One Vehicle Wiring Harness with 4 Pole Trailer Connector - 118460
The instructions with this are practically worthless as they refer to tiny little black and white pictures which are very hard to see. (A link to a website would have been appreciated.) I elected to run the 12 volt feed from the battery under the car. I brought the wire into the trunk area via the little rubber drain plug under the spare so I wouldn't have to drill though the floor. The white ground wire should be about 16" longer then you could use an existing ground screw which appears when you remove the back threshold. (You need to remove the threshold anyway to run the cable to the right tail light.) I spliced about 16" of wire into the white wire using some splices I had lying around and a piece of the black wire which was longer than I needed. The instructions apparently want you to hang the trailer wiring connector out the hatch and close the hatch on it. As all Matrix owners know the weatherstripping on the Matrix is very poor and not wanting to make it any worse I ran the connector down through the drain hole. A little duct tape to close the hole and protect the wires and it was done. Probably took about an hour. There was a link to a video on installing the wiring that was sent with a request for a review. Unfortunately I did not see it before I did the work but it's just as well as my way was actually quicker. You can feed the cable from the tail light opening down through to the spare tire well without taking off the side panels. Just remove the spare to give yourself some room to get an arm in the hole.




by:
Ford Edge

This installs easy, even though I had installed another model previously, its a no brainer. Main work is removing the side panels to get to the light wiring and then running a power wire to the battery. Finding a hole in the wheel well isn't hard, but then you have to get on your back and run it under your car and up through the engine which is not hard, just takes time and your on your back on the ground or on a creeper. Plugging into your lights isn't hard, just the running the power wire which I ran along the bottom edge of my frame close to the doors.




by:
2013 Scion xB

Received the product and found the instructions to be difficult to read. Fortunately there were visions on You Tube that provided excellent instructions on how to install the wiring harness. The unit was fairly easy to install and works well.




by:
2010 Pontiac Vibe

The video crew at etrailer deserve an award! I watched the video before I placed the order then again right before I went to install. It took me 60 minutes from opening the box to the final test of the lights. Everything was covered in the video and the tips specific to the vehicle were spot on. I've never had anything install that smoothly. Thanks video team, you rock!




by:
2010 Pontiac Vibe

It took me about four hours, but I decided to flow a factory wiring harness along the interior on the drivers side. I had to remove several panels and then put them back on when done.
The harness works flawlessly.




by:

Longest part of installing this was running the wire from the back to the battery, but it wasn't hard. Rented a trailer the same day and everything worked perfectly. The step by step video took all the mystery out of how to install it, so it just went in quickly.
The only thing I would caution anyone about is to have a few extra zip ties available because it's a long run under the car to the battery terminal.




by:
2009 Pontiac Vibe

This harness is great. Install went as per instructions, hides away when not in use, and my turn signals worked as before with no "fast" flashing from overload. Great product.




by:
2009 Pontiac Vibe

Called at 1pm, pushed them to ship same day arrived next day!!! EXCELLENT service and support. I bought from etrailer because of the detailed installation videos, low cost and a fitment for my 'discontinued' 2009 Pontiac Vibe . The packaging of the parts in the box is nicely done and I appreciate the parts at least being made/assembled in Mexico (North America) not China.




by:
2009 Pontiac Vibe

Product was easily installed. The only challenge was running the power line from the battery to the unit in back. I don't have a lift, and a Vibe is a low profile auto. I'm glad that I'm fairly thin!

The written instructions are fairly good. I had access to an online video of installation which added much to clarity of installation.

Overall a very good product!




by:
2010 Pontiac Vibe

Unless the car is on a hoist, running the wiring is harder than shown on the video. Unplugging the connectors is also harder than shown on the video, but it is a good quality product.




by:
2012 Scion xB

good directions,a bit more work than otherwire harnesses as you need to bring a feed from battery to trunk,all needed parts are included although you might want a few more zip ties.




by:
2010 Toyota Matrix

Plug and go, patience is required to find way through gasket in fire wall otherwise was very simple. Well worth buying this kit as opposed to trying to wire up something yourself for sure. Will buy again when I get another vehicle.




by:
2009 Toyota Matrix

Able to install with nothing but an IKEA wrench, coat hangar, box cutter, and a few extra zip ties. The assembly was straight-forward and I didn't even need to lift my 2009 Matrix. The only complaint I have is that a couple more zip ties would have made life easier.




by:
2013 Scion xB

Product arrived on time and installed perfectly on my 2013 Scion xB. The installation video provided on etrailer's website was very helpful in making the install go so smoothly. Thanks etrailer!




by:

It was was not that hard to install just take your time and it will work if you know anything about wiring. If I had a lift to pick up the car it would have been very easy I just hate laying down on the grround.



25
59
Show More Reviews

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

  • Why Does the 2009 Pontiac Vibe Require a Modulite
    The Vibe requires a Modulite. A Modulite is a converter that draws 12-volts of current directly from the vehicle battery which is necessary for operating the trailer lighting. The electrical system alone, without help from the battery, cannot handle the increased amperage required to run the vehicle lights as well as the lights needed for the trailer. This is the safest option because the extra amps to power the trailer are no longer going through the expensive electrical components of...
    view full answer...
  • Recommended Trailer Wiring Harness for 2012 Scion XB
    I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118460 for 2012 Scion XB. The Tekonsha brand converter boxes tend to last a bit longer compared to the other brands in our experience.
    view full answer...
  • Trailer Wiring Harness Recommendation for a 2009 Pontiac Vibe
    For your 2009 Pontiac Vibe you would want the Tekonsha harness part # 118460 as it is a confirmed fit that will install easily by plugging inline with the taillight harness. I can't recommend a harness from a different vehicle for yours. I attached an install video for this harness for you to check out as well.
    view full answer...
  • Troubleshooting Trailer Wiring Harness 118460 on 2010 Toyota Matrix
    The wiring harness # 118460 that you referenced is a correct fit for your 2010 Toyota Matrix and it sounds like your trailer's clearance lights are dimming when you press the brake pedal. When this happens the cause is often a weak ground connection which is easy to correct. What you can do is disconnect the white ground wire's ring terminal from the grounding point. Sand and clean that spot so that you have exposed clean bare metal that is free of paint, primer, undercoat, rust and grease....
    view full answer...
  • Recommended Trailer Wiring Harness for a 2009 Pontiac Vibe
    There are 2 options for wiring harnesses on the 2009 Pontiac Vibe. The Curt vehicle wiring harness # C56035 will have a higher capacity, which is desirable if your trailer has more lights than the bare basics. The 2nd option is the Tow Ready wiring harness # 118460 which I have found to be more reliable. It is recommended that you use a small amount of dielectric grease # 11755 on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent...
    view full answer...
  • Can Trailer Wiring Harness Power Wire be Connected to Running Light Wire Instead of Battery
    When properly installed a Tow Ready powered wiring harness such as # 118460 will have power going to it all the time but not power coming out all the time because of the circuitry inside the converter box. The tail light wiring on a vehicle is only rated for so much draw. By connecting the power wire to that circuit all of the trailer lights and vehicle running lights would be drawing on the one circuit and could overload it. Any deviations from the instructions would result in a void...
    view full answer...
  • What Size Bolts are Used to Install a Trailer Hitch on a 2010 Toyota Matrix
    If you look at the instructions for Curt hitch # 12228 which I have linked for you, the bolt size used is M12-1.25 x 30mm. This is a 12mm bolt. This is the size that fits the factory weld nuts on the 2010 Toyota Matrix. Sometimes the weld nuts can get packed with grime or corrosion and it will seem like the bolts are too large to fit. We have a video and an FAQ article which I have linked for you that shows how to clean out the weld nuts to get the hardware to fit properly. If you plan...
    view full answer...
  • What Trailer Hitches Will Fit 2009 Toyota Matrix XRS Without Any Trimming Of The Rear Fascia
    On the Draw-Tite Class I Trailer Hitch, # 24812, it will fit on your 2009 Toyota Matrix XRS with the lower rear fascia. The rear fascia has a center section that will have to be removed when you install the hitch. It is not hard to remove that section because it is made to be removed for a trailer hitch installation. Also needed for towing would be the Draw-Tite Ball Mount, # 3593, and either the Tow Ready 1-7/8 Inch Hitch Ball, # 19256, or the Tow Ready 2 Inch Hitch Ball, # 19258. The...
    view full answer...
  • Is Fascia Trimming and 7-Way Adapter Required for the 2009 Toyota Martix XRS with # 24812 Hitch
    I did some research and from what I can see on the 2009 Toyota Matrix the rear fascia is very similar on the S and XRS models. You may find that there is a part in the center of the fascia that needs to be removed on he XRS and XR Sort models, but no trimming is required, this part should snap out of the rear fascia, if your vehicle has it installed. The Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector, item # 30717, can be added to your vehicle with the addition of the Tow Ready...
    view full answer...
  • CURT Hitch Recommendation for a 2011 Toyota Matrix AWD XR
    The CURT hitch you would want for your 2011 Toyota Matrix AWD XR would be a CURT Trailer Hitch # 12221. I attached installation instructions for you to check out also. You will need to trim the lower fascia to install this hitch. The CURT Hitch # 12234 that you referenced is not a confirmed fit for your vehicle so I would not recommend it for you. You may be interested in purchasing the following products to complete your towing setup: Tow Ready Custom Fit Vehicle Wiring # 118460 (installation...
    view full answer...
  • Does Draw-Tite Trailer Hitch # 24812 For a 2009 Toyota Matrix Come with a Trailer Wiring Harness
    The trailer wiring harness for the 2009 Toyota Matrix, # 118460, does not come with the Draw-Tite Trailer Hitch, # 24812. We include related products on the right side of the page and if you have entered the year, make, and model of the vehicle in our fit guide to look at hitches, the correct wiring will also appear along with the recommended ball mount and balls, but all items are sold separately unless indicated on the product page. The recommended ball mount is # 3593 and you can use...
    view full answer...
  • Differences Between Curt Class II Receiver Hitch Parts #12228 and # 12221 for a 2010 Toyota Matrix
    The two Curt Class II Receivers offered for your vehicle, parts # 12221 and # 12228 have the same weight capacities and install in the same manner. Part # 12221 is constructed of round tubular steel that many find more attractive than the square tubing from which part # 12228 is constructed. If your Matrix is the XR or XRS model, minor trimming of the lower bumper fascia might be required. If you are planning on using the hitch for towing purposes, you will also need the T-1 Vehicle...
    view full answer...
  • Trailer Hitch Recommendation for a 2009 Toyota Matrix
    First, where the car was built is not as important as what market the car was built for. If it was built for the U.S. market, it does not matter if it was made in Canada, Mexico, or Japan. You have probably noticed that many cars for any given year come out about a year early, so it is not unusual to see a model year 2009 car with a build date of 2008. A Class II hitch is going to be the better option and out of the 2 Class II hitches, I recommend the Curt Trailer Hitch # 12228 because...
    view full answer...
  • Trailer Hitch Recommendation For 2011 Scion xB
    Since Toyota recommends not to tow with the xB I cannot recommend doing so, although it is done quite frequently. In my research I found several people on both sides, some saying they do not tow with the xB, and others saying that they tow all the time. Most people that do tow say they do not tow anything over 1,000 lbs to be on the safe side. The trailer hitch we offer for the xB I recommend is Curt Trailer Hitch, part # C12490. This is a Class ll hitch and it has a 1-1/4 inch receiver...
    view full answer...
  • Is the Trimming Required to Install Curt Trailer Hitch on 2009 Toyota Matrix XRS Visible
    The area that needs to be trimmed in order to install Curt trailer hitch # C12228 on a 2009 Toyota Matrix XRS will not be visible unless the trailer hitch gets removed. A small area will need to be trimmed to make space for the receiver. I have included a link to the installation instructions for you. If you plan on doing some towing the correct ball mount is # C45521 and you will need pin and clip # PC2. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer...
    view full answer...
  • Trailer Hitch Recommendation for 2012 Toyota Matrix for Towing
    I took a look at the owner's manual for a 2012 Toyota Matrix and it said it does not recommend towing with the Matrix that has a 1.8L engine, but the Matrix for a 2.4L can, and has a towing capacity of 1,500 lbs. That does not mean you can't tow with the 1.8L engine, but we have to recommend sticking with what the owner's manual says, so the decision to tow would be up to you. If you decide to two, the trailer hitch I recommend for the 2012 Toyota Matrix is the Curt Trailer Hitch Receiver...
    view full answer...
  • Receiver Height For 2009 Pontiac Vibe and Parts Needed For Trailer Towing
    With the Curt Trailer Hitch Receiver # C12228 installed on a Vibe similar to your 2009 Pontiac Vibe we noted the top of the hitch will sit at approximately 12". Please note that this can slightly due to different models offering different tire sizes and springs sagging due to age. The Curt Class II Drawbar # C45521 has a 2-5/8" rise that would put the ball mount at an approximate height of 14-5/8". A 2" Ball # A-82 or 1-7/8" Ball # A-80 will be needed depending on your trailer coupler....
    view full answer...
  • Trailer Hitch Recommendation for a 2013 Scion xB
    There are only Class I and II hitches with 1-1/4 inch receivers available for your 2013 Scion xB. Since there is an option I always recommend the higher capacity hitch, in this case Class II hitch # C12490. If you plan on doing any towing please consult the vehicle owners manual for the vehicle gross trailer weight and tongue weight capacities. The hitch is rated for 3,500 pounds gross trailer weight and 350 pounds tongue weight. Whichever is lower, the vehicle or the hitch, is the figure...
    view full answer...
  • Can a 2009 Pontiac Vibe Safely Tow a 1,500 Pound Boat Trailer
    Since you would be right at capacity I do recommend taking any measures feasible in lightening the load. That will make it that much easier on the vehicle. I do believe that properly equipped, the 2009 Pontiac Vibe will be fine towing the 1,500 pounds. Since you will not constantly be towing it up a steep ramp, and that aspect is only a small part of the journey, the Vibe should be just fine. For a trailer hitch, you can use # C12221 but it is for GT models. If you have a GT model then...
    view full answer...
  • Differences Between C12228 and C12221 Class II Hitches for 2011 Toyota Matrix
    You're absolutely correct. The Curt # C12228 Class II hitch will install with the crossbar concealed behind the bumper (see installed photos on linked product page), while the Curt # C12221 Class II would be fully visible. Other than their appearance once installed, the capacities of the hitches are identical, as is the level of difficulty that the install involves. Matrix XRS and XR Sport models that have the fascia under the bumper will require some fascia trimming for either hitch...
    view full answer...
  • Differences Between Class I and II Trailer Hitches Available for 2009 Pontiac Vibe
    As your Vibe only has a 1500 lb towing capacity, the only benefit you'd get from going with a Class II hitch is the ability to carry 4 bikes on a bike rack, where the Class I can only carry 2. If you're only planning on towing, and are fine with being limited to carrying two bikes on a bike rack, the Draw-Tite Class I, part # 24812 would be my recommendation. The hitch includes the pin and clip, but the properly sized ball mount and trailer ball are sold separately as part # 19256 for...
    view full answer...
  • Trailer Hitch & Related Items for 2009 Pontiac Vibe
    Yes, the Curt 1-1/4-inch Class II hitch # C12221 will fit on your 2009 Pontiac Vibe so long as it is the GT version. If your Vibe is other than the GT version then instead you will want Curt's hitch # C12228. Both hitches share the same 250-lb tongue weight (TW) capacity and 2500-lb towing capacity. An installation video for each hitch is linked. The recommended ball mount to use in either hitch is part # C45521. Use pin and clip kit # F-4 to secure the ball mount in the hitch. For a compatible...
    view full answer...
  • Changing Idler Hubs on Small 5x8 Trailer to Electric Brakes
    With a smaller trailer like you describe, electric brakes would be my recommendation both from a cost standpoint as well as the ease of installation. For the trailer, you would need two hub/drum assemblies and two brake assemblies. To determine if the hub/drum assemblies we offer are compatible with your trailer spindles, you will need to pull one of your idler hubs off, and look at the inner and outer bearing numbers. The hubs we offer, part # AKHD-545-35-K use # L68149 inner bearings...
    view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Nicholas E
Test Fit:
Nicholas E
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.