bing tracking image
  1. Custom Fit Vehicle Wiring
  2. Tekonsha
  3. Custom Fit
  4. Trailer Hitch Wiring
  5. 4 Flat
  6. Powered Converter
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

Item # 118605
lowest price pledge
Our Price: $63.94
Custom Fit Vehicle Wiring

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Orders above $99 qualify for Free Shipping
Shipping Weight: 1.65 lbs
Quantity: 
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector Powered Converter 118605
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system. 1-636-306-4830 to order Tekonsha custom fit vehicle wiring part number 118605 or order online at etrailer.com. Free expert support on all Tekonsha products. Guaranteed Lowest Price and Fastest Shipping for T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector. Custom Fit Vehicle Wiring reviews from real customers.
  • All Info
  • Reviews (113)
  • Q & A (0)
  • Photos
  • Why etrailer?

Tekonsha Custom Fit Vehicle Wiring - 118605

  • Custom Fit
  • Trailer Hitch Wiring
  • 4 Flat
  • Powered Converter
  • Tekonsha

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.


Features:

  • Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
    • Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
  • Connects quickly and easily
    • Locate connection points behind tail lights
    • Plug in T-connector
    • Run hot lead to car battery
  • Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
    • Powered module connects directly to battery to avoid overloading vehicle's electrical system
  • Constructed of 16-gauge bonded wire
  • Comes with dust cap for 4-way flat connector


Specs:

  • Maximum amperage:
    • Stop/turn lights: 4.2 amps per circuit
    • Tail lights: 7.5 amps per circuit
  • 1-Year limited warranty


Installation

This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the tail lights on both the driver's side and passenger's side. You will have to remove the tail light assemblies to access this harness Once you've plugged in the T-connector, run the hot lead with the attached fuse holder up to your car battery. Connect the fuse holder to the positive terminal on the battery and insert the provided fuse.


Once installation is complete, the 4-way flat connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.


It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.


ModuLite Powered Tail Light Converter

A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.


With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.



118605 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite

Installation Details 118605 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118605

Average Customer Rating:  4.7 out of 5 stars   (113 Customer Reviews)

Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.

- 118605
by:

Wish it had mounting bracket for the 4 pin end and the hitch had horizontal for the safety chains instead of vertical



- 118605
by:
2016 Jeep Cherokee

expect it to be ok. My mechanic will install hitch and wiring on Monday



- 118605
by:

Connection was easy and it works great. I wired this to a 7-Pin/4/Pin Plug



- 118605
by:
2014 Jeep Cherokee

The harness fit right in with no trouble and functions perfectly!! The installation instructions were well written. I would recommend this harness.


Comments
After a year the harness still works like new. I would still recommend this product.
Troy - 11/03/2021


- 118605
by:

Relatively easy install; routed and plugged right into the vehicle's existing connectors. Modified a thing or two during the install for better reliability; definitely not a necessity, just a personal choice. Haven't had any issues so far. Overall great product.



- 118605
by:

Easy to follow detailed instructions.



- 118605
by:
2016 Jeep Cherokee

Just finished installing this trailer light setup. I highly recommend you have help. Gets old crawling out from underneath to grab tools n such. Also, if you can't use a lift, definitely put it up on ramps or jack stands, the extra room helps immensely. All the connections fit well. It's just a pain fishing the wires all over, but have patience. It take me 2-3 hours, but it is completed. I did solder some of the connections and used heat shrink, just to make sure it works well and lasts.



- 118605
by:

I lost parking lights but all other lights work


Comments
There are a couple of reasons that could cause the taillights to not function. The wire on the harness that is in control of these lights would be the brown wire [I have a diagram below for your reference]. The first thing that we recommend is to use a wire tester and test the brown wire on the harness to make sure that there is power. You can use part # 40376
Circuit Tester Kit
$73.09
[product info below] to test the wiring. We recommend testing the brown wire, and the pin to that wire on the 4-way plug. If those are showing that they are getting power, then you would have to check the wiring on your vehicle to make sure that power is coming from that wiring. Please note that not all vehicles have the standard wiring colors, and so, you will need to check out your owners manual in order to confirm which wire is for the taillights.
-- Etrailer Expert Katrina B - 06/21/2022


- 118605
by:

If I'm just talking about the product it is very well made well thought about and it makes insulation a charm I learnt my lesson sometime ago with these LED lights some of them you just can't change a bulb and if you hook up straight up to a trailer you get a chance of frying them out and you'll have to replace the whole tail light units these parts you're selling are a must it's not like old school anymore were you can just splice into the tail light wires and get out of my life your product is awesome your service is awesome your delivery is fast finding a product what you need and how you need it your website is unbelievably simple and fast and very knowledgeable in the long run you saved a lot of people a lot of money from being able to find the parts they need without trying to go old-school and just run wires straight through to the tail lights like I said everything's LEDs the car is set up for very low voltage and when you hook up a trailer with old-time bulbs even the trailer would LED bulbs if it's a new trailer you don't want to power a whole trailer by two tail lights you really do need your tail light adapter and insult Power Inn Supply very happy customer mr. Patrick


Comments
After installing the T harness The passenger side tail light did not work There was something wrong with your T harnes I and I had a heart attack so I havent messed with it since.
leon R - 03/19/2021

Thank you for your review! Sorry to hear you are having issues with your wiring harness. Please take a look at this help article about troubleshooting, specifically in the first box.

-- Etrailer Expert Sierra K - 3/22/2021


- 118605
by:

Great price, quick delivery, easy to in stall.



- 118605
by:
2015 Jeep Cherokee

Works well. Had to have installed professionally for on the 2015 Jeep Cherokee trail hawk the harness will not slide down rear left side after removing brake light. Very tight space back there. After it was installed it has worked perfectly.



- 118605
by:

Wasn't to hard to install. The only difficulty installing it was running the wire from the back of my vehicle to the front, other than that it's easy.


Comments
The wiring harness is still working great. No issues with it after a year later.
Sam G - 09/02/2021


- 118605
by:
2016 Jeep Cherokee

Everything worked great but the passenger side connection was not long enough to run all the way from the driver's side to the passenger side. I had to splice in a 3 foot splice to make it fit. Other wise everything else fit fine. I am not certain this is the proper kit for a 2016 Jeep Cherokee - although the website shows it as the correct item.


Comments
If you route that wire to the passenger side as shown in the video I linked for you, the connector will just reach the factory taillight connector.
-- Etrailer Expert Mike L - 04/19/2018


- 118605
by:

Want too hard to install and it works great so I'm happy!



- 118605
by:

When I ordered my hitch and light assembly kit I was truly impressed with how fast it was delivered! I first only ordered hitch then remembered the next day I needed lights! Called them and Jesse was so straight forward and knew what else I needed and the issue was resolved quickly! Just had it installed today! Wonderful customer service!



- 118605
by:

The harness fit very well. I am not a mechanic by any means and it took me about 1.5 hours to complete. Does help haveing two people to feed the power wire.



- 118605
by:

This item was well thought out and the instructions were easy to follow. Everything needed was included and installation was very easy.



- 118605
by:

Video instructions were great and easy to follow. Took me a little under 2 hours total. I used wheel ramps to help with accessing the area under the rear bumper, and then on the front wheels to get better access while running the ground wire to the front of the vehicle.



- 118605
by:
2014 Jeep Cherokee

This is for a 2014 Jeep Cherokee Latitude. It took me a little extra time as my helper was a 5 ton floor jack and it supported the receiver and if only my right foot had fingers it would have helped a lot. Loading the bolts and plates into the frame was a snap, I left the fish wires on the bolts and that helped a lot and I didn't lose a bolt into the frame,you must leave the exhaust hanging to get to the rear bolt closest to the exhaust curve just before the mufflers I didn't and it was a bear to torque it. Also after I cut the opening on the bottom of the bumper and already had torqued the receiver I had to pry the bottom edge over the receiver there was no other way to get the hitch up inside not enough forward space to get it to slide up and in. Other than that it was a snap. Now for the wiring harness, went well had a bit of a time getting the connectors up to the tail lights even with all 4 screws out and a little bit of play I had to pry the plastic support away from the body to get the connectors through. That was for the 4 flat, for the power for the harness I have a rig runner 4005 from Powerwerx for all my power as I am a volunteer Fire Fighter and have all the goodies that goes with it and every thing runs fine. For the 5 flat all I had to do was find and take out the backup bulb in the tail light and test to find which wire was hot. And then it was over and done put it all back together and drive away with my trailer. Sorry no picture it looks just like the factory/dealer put it on. Ray H



- 118605
by:

Nicole T went well above the call of duty she did a great job for me thank you



- 118605
by:

Great fit, clear instructions.



- 118605
by:
Jeep Cherokee

Perfect for adding trailer lights! Plenty of length for our Jeep Cherokee. SIMPLE install, literally took me 20 minutes from start to finish. Quality product, and even comes with wire connectors (not pliers) to attach cables and zip strips to secure harness to chassis.



- 118605
by:
2014 Jeep Cherokee

First time customer. I ordered a trailer hitch and wiring harness for my 2014 jeep Cherokee. Very pleased with the quality of the product. The price was outstanding. The directions and website was a big help. It made the job easy. The customer service was great. Very easy to talk to, and helpful. Great job guys. You have my future business.



- 118605
by:
2016 Jeep Cherokee

I ordered this vehicle wiring kit for my Jeep because it had more power output than the Curt they offered. Some of the reviews stated that the green wire going to the passenger side was too short so I followed the video instructions, which were excellent by the way, as best I could. The result was that I had about 8 inches extra that I needed to ty off so that the extra length would not hang too far. Follow the video and you should have no problem with insufficient length. The price was very reasonable and shipping was fast. Etrailer is a great company to deal with.



- 118605
by:

I compared the T-One installation instructions to etrailer's installation video "how to" before I bought this harness and I would not have bought the harness if I hadn't seen the video. T-One process requires removing body panels- which I absolutety refuse to do on a brand new vehicle. The etrailer video is really descriptive, easy to follow and easy to see what tools are needed to do the job- but doesn't say what size tools to use (I didn't have a Torx T10.)


27
115
Show More Reviews

Ask the Experts about this Tekonsha Custom Fit Vehicle Wiring



  • How to Route the 4-Way of Tow Ready Harness part # 118605 Out of a Jeep Cherokee
    I would recommend you just route the 4-way of the Tow Ready Harness part # 118605 out the back door when needed. Some people don't like this routing and ask for other ways to route the 4-way, but if you keep the 4-way on the inside of your vehicle when not in use you actually will protect it from the elements, which will greatly reduce the risk of corrosion or damage to the 4-way if it was dangling behind the vehicle. With that being said, if you really wanted to route the 4-way out of...
    view full answer...
  • Does Trailer Wiring for 2017 Jeep Cherokee Void Warranty
    The correct fitting trailer wiring harness for your 2017 Jeep Cherokee Sport is the part # 118605 which I attached an install video for. There is a law called the Magnussen-Moss warranty act that states, in part, that if you install an aftermarket part on your car then it will not void the warranty unless that part caused the problem. What's also great about the harness I recommended is that it only uses the taillight circuits of your vehicle as signal wires. It draws the power for the...
    view full answer...
  • Can Trailer Connector On Tow Ready Wiring Harness Be Stowed Inside 2014 Jeep Cherokee
    The 4-way flat trailer connector from the Tow Ready Custom Fit Vehicle Wiring # 118605 can be stowed inside the rear cargo area of the 2014 Jeep Cherokee. I have attached an installation video of this harness of a 2014 Cherokee showing the connector staying inside the vehicle.
    view full answer...
  • Is a Converter Box Needed on a 2015 Jeep Cherokee
    The electrical systems on newer vehicles are much more sensitive than years ago. If you are installing a trailer wiring harness on your 2015 Jeep Cherokee Latitude then you will need to use a converter box. A converter box will draw power from the battery so that the strain is not on the vehicle's electrical circuit. I cannot be certain this is the reason your lights are coming on and then going out but this would be a good place to start. I recommend using the T-One Vehicle Wiring Harness...
    view full answer...
  • Can Trailer Wiring Harness for 2017 Jeep Cherokee be Powered by a Rear Power Outlet
    Trailer wiring harnesses that require a battery connection to power the trailer lights, such as # 118605, should only get that power from the vehicle battery. Installing it in any other way will void the warranty. They are also not tested for any alternate installations and you will lose part of the circuit protection if you tied into a circuit rather than directly to the battery. The power draw of the lights may overdraw the power outlet circuit especially if that outlet is already fused...
    view full answer...
  • Why Would 2014 Jeep Cherokee Check Engine Light Come on After Installing Wiring Harness
    Installing an aftermarket trailer wiring harness like # 118605 on a compatible vehicle such as your 2014 Jeep Cherokee Latitude should not trigger the 'check engine' light. This and similar kits plug in at the taillights and otherwise interact with the vehicle only at the 12V power connection that is made at the battery. Many things can cause a check engine light to come on. A loose gas cap, filling your tank with the engine running (never a good idea!) or simply touching the active 12V...
    view full answer...
  • Does a Vehicle Wiring Harness that Draws Power From the Battery Directly Need to Be Disconnected?
    Good question. The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118605 and other units that use direct battery connection, do not need to be disconnected from the battery when not in use from the trailer. It is circuit protected to ensure you won't have a power draw that will put strain on your battery. There is no need for disconnection or an in line switch to cut that power off. It will not be a hindrance to your battery or any other vehicle functions. If you...
    view full answer...
  • Troubleshooting Tekonsha T-One Wiring Harness Blowing the In-Line Fuse
    The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118605 having the included fuse blow shows either a short in your wiring connections with additional power coming from something or a bad controller. Most of the time a fuse blowing each time will have to do with the power wire grounding to the vehicle frame somewhere. I recommend tracing that power wire to find an exposed wire or connection. I recommend disconnecting each connection and inspecting to ensure...
    view full answer...
  • Instruction Manual for the Tekonsha T-One Wiring Harness 118605 on a 2018 Jeep Cherokee
    I have attached the instructions link for the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118605 to this answer page for you. These will be the same ones that are included with the kit but in PDF form. If these do not provide enough assistance for installation then we have a video which I have attached for you as well. Please let me know if you have any questions whatsoever.
    view full answer...
  • Does Trailer Wiring for 2015 Jeep Cherokee Cause Error Messages on Dash of Vehicle
    The trailer wiring harness part # 118605 that you referenced is a confirmed fit for your 2015 Jeep Cherokee and would not cause any lights to appear on your dash such as a "bulb out" message or anything similar. It'll install and work fine without needing a visit to a dealer either. I attached an install video for this for you to check out as well.
    view full answer...
  • Recommended Trailer Wiring Harness for 2015 Jeep Cherokee Latitude without Tow Package
    Yes, the Tekonsha T-One Vehicle Wiring Harness # 118605 referenced in your question is confirmed to fit your 2015 Jeep Cherokee Latitude without the towing package. This custom harness will install by connecting directly to the built-in ports located behind the driver and passenger side tail lights. It will provide you with a 4-Way connector at the rear of your Jeep to connect with and power a trailer's signal lights. I have attached an installation video on your vehicle that you can...
    view full answer...
  • Easiest to Install Trailer Wiring Kit for 2015 Jeep Cherokee
    The easiest and most plug and play option for we have for trailer wiring for your 2015 Jeep Cherokee is going to be the Tekonsha kit part # 118605. This like all of the other plug and play options do require running a power wire up to the positive post of the vehicle battery. While this step does require a bit more time it allows the vehicle wiring to be totally protected since all of the power gets drawn from the vehicle battery. So in the event of a trailer wiring short you won't be...
    view full answer...
  • Trailer Wiring Harness Fit on 2015 Jeep Cherokee Without Factory Tow Package
    Correct; while there is a trailer wiring harness for your 2015 Jeep Cherokee without the factory tow package, they each have a converter and require a power wire run to your battery. Trailer wiring harnesses are custom fits for vehicles, and in the case of your Cherokee, there simply isn't an option without a converter and power wire. So if you are okay with doing that, then you will want the safest and most dependable harness, which is the T-One Vehicle Wiring Harness with 4-Pole Flat...
    view full answer...
  • Wiring Harness Recommendation for 2014 Jeep Grand Cherokee
    The T-One Vehicle Wiring Harness that you will need for your 2014 Jeep Grand Cherokee is part # 118605. This harness will allow you to quickly and easily install a 4-way trailer connector on your Cherokee. I have also included an installation video for you. The T-One Vehicle Wiring Harness, # 118425, that you mentioned was designed for the 2007-2013 Jeep Grand Cherokee.
    view full answer...
  • 2016 Cherokee Trailhawk Trailer Wiring Harness Recommendation
    For a trailer wiring harness that will fit your 2016 Jeep Cherokee Traihawk and will not require any computer reprogramming you would need the Tow Ready harness part # 118605 which is a confirmed fit. Since this harness functions by tapping into the taillights of your vehicle the computer would not need to be messed with. I attached an install video for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with...
    view full answer...
  • Trailer Wiring Harness for 2014 Jeep Cherokee
    If your 2014 Cherokee didn't come from the factory with a 7-way trailer connector, you'd need to use the # 118605. The # 118605 T-One Connector plugs inline with the connection between the vehicle's factory wiring harnesses and the taillight assemblies. A power wire will need to be ran to the battery. I've linked you to an installation video showing the wiring harness being installed on a 2014 Cherokee. The # 118376 you'd looked at is a fit for a 2001-2003 Caravan/Grand Caravan/Town &...
    view full answer...
  • Trailer Hitch Installation Difficulty on a 2014 Jeep Cherokee Latitude
    Draw-Tite trailer hitch # 75998 is indeed a fit for the Latitude model of the 2014 Jeep Cherokee. Trailer hitch installation is something that you can do at home but I do recommend having an assistant because hitches are heavy and getting them in the right place and tightening hardware at the same time is difficult for one person to do alone. All 2014 Jeep Cherokees will have the holes for the hitch already in the frame. You will not have to do any drilling but there is some trimming and...
    view full answer...
  • Is Everything Needed to Install a Trailer Hitch on a 2014 Jeep Cherokee Included with the Hitch
    Draw-Tite trailer hitch # 75998 includes the hitch and the mounting hardware needed to install it on your 2014 Jeep Cherokee. All you need are the tools and the time! I have included a link to the installation instructions for you. If you will be doing some towing with the hitch I recommend etrailer ball mount kit # 989900. It includes 2 ball mounts, 2 balls, a hitch pin with clip, and a storage bag. And if you need to add trailer wiring you can use # 118605. I have linked a video showing...
    view full answer...
  • Can Trailer Wiring Harness Be Connected to the Power Outlet at Back of a 2016 Jeep Cherokee
    Even though attaching the power wire to a 12 volt outlet would make installation a little faster, the trailer wiring harness # HM11142464 needs to be connected directly to the vehicle battery on your 2016 Jeep Cherokee. This is so it is fused by itself and so the harness can maintain its level of isolation from the vehicle wiring protecting it from short circuits and possible costly repairs. I have included a link to a video showing installation of wiring harness # 118605 which installs...
    view full answer...
  • Trailer Wiring Harness Recommendation for a 2016 Jeep Cherokee
    For trailer wiring for your 2016 Jeep Cherokee you will want to go with the Tow Ready wiring harness part # 118605 that has been confirmed as fit. This will plug inline with the taillight harnesses of your vehicle to provide you with a 4-way. I attached an install video for this harness for you to check out as well.
    view full answer...
  • Connector Won't Work After Plugging in Jeep Quick Connect Outlet in on a 2016 Jeep Cherokee
    If your 2016 Jeep Cherokee did not come with the factory trailer connector already installed then you will need to have a dealer activate the tow package and it may also require a relay. The trailer wiring harnesses that we carry for the Cherokee fit models that did not come with the factory tow package. They plug in line with the tail light wiring. For example take a look at the Tow Ready harness # 118605. I have included a link to a video showing how it installs. With this harness...
    view full answer...
  • Trailer Hitch and Wiring for a 2014 Jeep Cherokee
    The lower fascia on the back of the 2014 Jeep Cherokee curves, not straight up and down, so the reason there has to be trimming is because of how gentle that curve is and how long it curves. If the fascia went from vertical to horizontal like an L shape there would be no trimming. But it sort of gently curves down so trimming is required to install the hitch. I have included a picture that should help. It is a different hitch but shows the curve nicely. The other hitch, # 75998, has a...
    view full answer...
    Image 1 for
  • Towing Capacity of 2016 Jeep Cherokee and Trailer Hitch Fit
    Your 2016 Jeep Cherokee has a towing capacity of 2,000 lbs unless it has a 3.2L engine with the Trailer Tow Package; if this is what your Cherokee has then its capacity is 4,500 lbs according to the online copy of the owner's manual I took a look at. If your Jeep has the towing package you are likely to be able to tow a trailer on the longer side. For a trailer hitch that fits your '16 Cherokee I recommend the Draw-Tite Trailer Hitch # 75998 because it has a concealed crosstube and is...
    view full answer...
    Image 1 for
  • Recommendation to Transport 400 Pound Powered Wheelchair with 2018 Jeep Cherokee
    I took a look at the online owner's manual for your 2018 Jeep Cherokee Latitude. It does state that for the 2.4L engine, the maximum tongue weight for this vehicle is 200 pounds. I do recommend verifying this information with your copy of the owner's manual, as it's very possible you have a different model and the information could differ. If this is correct, the best option for transporting your powered wheelchair will be with a small trailer, since the vehicle cannot safely handle the...
    view full answer...


< Previous
123. . .5



Do you have a question about this Custom Fit Vehicle Wiring?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality custom fit vehicle wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate custom fit vehicle wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Zach D
Video by:
Zach D
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B
Employee Cole B
Installed by:
Cole B
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.