bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13147
Our Price: $175.13
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 29 lbs
In Stock
CURT Visible Cross Tube Trailer Hitch - 13147
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13147 can be ordered online at or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (415)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch - 13147

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • CURT
  • Visible Cross Tube
  • 400 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
    • Maximum tongue weight: 400 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

13147 Curt Class 3 Trailer Hitch Receiver

Installation Details 13147 Installation instructions

This Product Fits The Following Vehicles

Customer Satisfaction Score:

Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13147

Average Customer Rating:  4.9 out of 5 stars   (415 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


I ordered and installed this hitch last month (Aug 2011). I was very satisfied with customer service that took my telephone order and with the fast shipping.
I installed the hitch myself and read most of the prior reviews to get hints on installation. I think that the instructional video doesn't make it clear that besides the 2 rubber "doughnuts" supporting each muffler there is an additional doughnut hanger just forward of where the single exhaust pipe forms the "Y" to the dual mufflers. If you don't remove this one you will not be able to lower the mufflers low enough to install the hitch. I think this is why a couple of people had to remove their mufflers to install the hitch.
Taking advice of previous reviewer, I also removed the foam storage trays that are on both sides of the spare tire and removed the round pieces of tape covering access holes which allowed me to drill from inside the vehicle.
I installed the unit myself. Had the cars rear tires on low ramps. Used a small floor jack at the "Y" to lower the exhaust and kept the jack there to support exhaust.
Laying on cardboard I used a second floor jack support and raised the hitch into place and pumped only a few strokes with my right foot as I used my hands to level/balance and position the hitch and started the nuts on the bolts. It took about an hour & 15 minutes to complete the install. A friend was supposed to help me with the job but by the time he got here I was done.
I also bought the S64670 Swagman XTC-2 bike carrier and S64029 locking anti-rattle hitch pin. Very satisfied with both.


The processing of disconnecting the exhaust pins from the rubber disks was more challenging than in the video. Perhaps I needed a special tool to do it. I used a small crowbar or a long screwdriver depending on access and leverage points. One thing to make it easier is to spray lubricant into both of the pins that go into the rubber disks.

I did the job on the ground using jack stands to hold the rear of the car up. Having a floor jack to raise the exhaust back in place allowed me to subtlety raise and lower the exhaust as necessary to align the rubber disks in line with the pins for reconnection.

As always, wear goggles when working under the car because I got a lot of sand/dirt fall down as I was working the pins and rubber disks.

The hitch looks better than I expected.

2010 Subaru Forester

Bought this for my Subaru Forester 2010. I used it to move over 2,000 miles pulling a uhaul. It worked wonderfully and now I use it for a bike hitch and it is still solid and a great hitch.

2011 Toyota RAV4

This receiver is great. Even somebody like me with minimal tools and experience can figure it out. Because my exhaust bolts are extremely rusty, I opted to not remove the exhaust, and instead lowered it as far as I could get it. This made it considerable harder nearly every step of the way because it meant I was working around two large cylinders, but I did get it installed eventually. I also managed to do this without another person to help hold the receiver in place while bolting. This was the one time that having the exhaust there was helpful because it held it up on one end while I held the other.

Overall this is a great product. Though I have not put it to the true test, I am confident that it will stand up to the task.

*Seperate testimonial to E-trailer's AMAZING customer service:
I ended up losing one of the rectangle steel plates inside the frame after putting it in. I emailed them and they promptly sent not 1, but 4 new ones out to me for no charge! Thanks a ton.

A bit over a year later and I still stand by this product. It has treated me well.
Karl - 03/21/2022


I picked this trailer hitch out because it was the absolute cheapest one. It arrived today less than a week after I ordered it. I was able to track the package online which was helpful. The hitch was a great fit. I installed it in my 2012 Subaru Forrester. I felt a little overwhelmed reading the instructions. I read them a couple of times, and watched The etrailer video And I was able to do it relatively painlessly. I am very pleased with the purchase, the product, the service.


Well built product. Great service from etrailer. Extremely easy to install. This hitch has gotten lots of use.


This was exactly what I needed. This high quality hitch was very easy to install. Instructions were pretty easy to follow. The YouTube installation video was a lot easier to follow. Now I can move up to 4 mountain bikes on this bike rack with confidence to any place I want to go. Thanks!!!

Awesome!!!!! This product is of the highest quality. Install was a snap. And it works with all kinds of bike racks.
Ruben H - 05/09/2015


WOW !!!! Fast delivery !!!! It had taken me a full two hours...I stopped to take pics at nearly every step..I even used the box it came in to lay on while I installed....I'm so happy with all the money I saved ordering through and installing myself. Thank you very much for such a pleasant experience.

What do you call those orange step blocks to lift the car? Thanks.
-- comment by: John D - 08/21/2013

2012 Subaru Forester

Trailer hitch for my 2012 Subaru Forester had a good price and is very good quality. It fit perfect and looks good. Service and instruction video were great. I have bought 2 hitches for my cars and am pleased with both of them.

Been using this hitch for over a year. Couldnt be happier. Use it mainly for mounting a bike rack.
David - 05/11/2020

2011 Subaru Forester

I was extremely pleased with the quality of the hitch itself and the install was pretty easy. Customer service was terrific. It arrived a day earlier than they had predicted and everything was exactly as advertised. I would highly recommend both as well as the Curt hitch.

2010 Subaru Forester

High quality. Relatively easy install with good instructions.


This trailer hitch was very easy to install on my 2012 Subaru Forester. Subaru and various mechanics wanted to charge me $200-300 to have it installed, but with the help of a friend I was able to install it on my own in about 45 minutes. The hardest part was lowering the exhaust.

I have not yet used the hitch to haul anything, but it is perfect for my hitch-mounted bike rack.

2013 Subaru Forester

Ladies - you can do it! 2013 Forester - Installed by a woman. Package arrived in excellent condition; all parts present. I used the "remove the spare tire trays" method. The side trays are easy to pop out and put back in. I think it was a better option than drilling/grinding from below. I used a 17/32 bit and a small round file. Install was not difficult but for putting the isolators back on. Make sure the rubber isolator is on the long bar of the exhaust hangar as you hang the exhaust back up. :) You'll be glad you did. A few choice words and tenacity got them to behave. All in all, time was close to 60 minute install. I didn't need to lift the car up. MacGuyver'd hitch supports with cinder blocks and split wood until I could get the bolts on. Torqued to [see instructions] per instructions. I get my bike rack in this Thursday. Excited to try out my new hitch! Thanks etrailer. You are a great company! And thank you to all who shared their experiences. You helped out immensely!

2012 Subaru Forester

Toughest part of install was disconnecting the rubber exhaust hangers.
Hitch was easy to install once exhaust was dropped down.
Hitch looks great installed, it fits nice and tight under bumper cover.
This hitch will be used to carry a bike rack and occasional utility trailer tow.

Exhaust hangers are much easier to reinstall then to remove.
Soap solution and grease help a lot.
I also blessed with a 2 post lift to put the car up in air makes doing this type of work 100% easier.

2015 Subaru Forester

I bought this trailer hitch for my 2015 Subaru Forester. I wish I had 4 wire threads for all four bolts instead of just two. I actually threaded the other two bolts with thread so not to lose those as well (the video you had was excellent, but I do not have a car lift and am on the ground under the car). Also could you state to wipe clean the surface that the trailer hitch is in contact with? As I was torquing down the bolts I heard crunching sounds (probably dirt and such). I was not going to lower the hitch to clean at that point. I am sure it is okay, but cleaning would have been nice. Everything else worked out great. It took me about 2 hours and 40 minutes to install (my drill is weak, the five exhaust supports took longer to take off and on, and I took pictures and video). But overall I am very happy with the product.

2009 Subaru Forester

I'm not the most mechanically minded person, but I found the installation process of this to be simple and straightforward. The only challenges I had in installation were fitting the drill up in there to drill the holes bigger (even after lowering the exhaust), and getting the holes in the hitch to line up with the bolts without pushing the bolts through! Definitely required a helping set of hands to raise it up and bolt it on.
It's a sturdy product. I plan on using it primarily for a cargo carrier for deer hunting purposes, but I'm sure I'll try to find other things to use it for as well!

2012 Subaru Forester

Just had the hitch installed.

looks great, have to wait for better weather to see how well it works with my bike rack hooked up to it.

May need to purchase the wiring harness at some point if I decide to use it with a small trailer

2011 Subaru Forester

It was not 15 minutes as on video. Taking rubbers off needed some lube and force. Drilling and dremeling while under the car is a bit of a chore :-) watched video 3 times to get fishhooking right :-) but after couple of hours it was on. It looks sharp :-) can be done by two folks and small ramps. Needed extra: 1/2 inch drill bit and drill, Dremel with some cutting wheel, lube, belt, ramps, wrench with bit, power for tools, some rug and gloves :-) overall : good product and good instruction by etrailer.

2010 Subaru Forester

There’s a reason this Curt hitch is a top recomendation for your Subaru Forester, easy to install and strong as all get out. Low profile It doesn’t stick out past the bumper, and only weighs 30lbs. Fit and finish are excellent perfect for towing or a bike rack. etrailer videos take all the guesswork away from the project. Thanks again for the free shipping and phone support!


After drilling holes out in the car the hitch fit absolutely perfect

2011 Subaru Forester

The product was 100% as advertised. I had one small confusion point which holes were meant to be used for the install. The guide had a diagram that didn't quite meat up with real life, a quick skim threw the video guide cleared that up in seconds and the install was done in about 45 minuets.


Hitch is great! Great fit! Super solid! The hardware kit provided had some helpful bits included to make the job easier. If you are a little handy and have a safe way to lift the rear of your vehicle, it is quite doable. Many local garages install them for not too much money if you prefer.

2010 Subaru Forester

The hitch is made great. The installation video made installing the hitch a snap. Took me and a buddy a little over and hour. In two beers time everything is back on a working. Yes, I would recommend this

Casey S - 08/12/2016

2010 Subaru Forester

The online video instructions were great. I installed the hitch using the version where you just detach the muffler at the hangers and one more on the exhaust pipe (5 total) and drop it down, but with a strap in place. I installed it right in my driveway without jacking it up or using ramps. Took maybe two hours, but I took my time with it.

2010 Subaru Forester

Pretty easy install. The videos helped! Took around a casual 2 hours to install it.

Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Hitch Spacers For Curt Trailer Hitch # 13147
    The square hole spacer blocks for your Curt Trailer Hitch Receiver - Class III # 13147 are within the tolerances as you referenced. They are simply used to keep the bolt from rotating so you can torque the flange nut to specifications. I've attached the installation details to assist with the installation and heat shield modification.
    view full answer...
    Image 1 for
  • Are The Chain Loops On a Hitch Rated As Tow Points?
    No. You are not able to use the safety chain loops on your Curt # 13147 hitch as tow points because the loops that are found on the receiver tube of trailer hitches are not rated for towing. These loops are designed to have safety chains looped to them and connected to the trailer in order to provide a layer of safety in the event that the hitch ball or ball mount fail.
    view full answer...
  • Rear Fascia Trimming on a 2009 Subara Forester
    The 2009 Subaru Forester will not need to have the rear fascia trimmed or cut in order to install a hitch. The hitches designed for your vehicle sit just under the rear fascia. Some vehicles will need to have the rear fascia trimmed in order to install a hitch, but not in this case.
    view full answer...
  • Does the Fishwire Tool Come with Trailer Hitch # 13147, Will the Holes Rust on 2009 Subaru Forester
    The fishwire tool does come with Curt Trailer Hitch, # 13147, for the 2009 Subaru Forester. Corrosion and rust is a possibility and one way to help prevent it from happening is to give the holes a shot of spray paint like you mention. I have included a link to the installation instructions for reference.
    view full answer...
  • Exhaust Will Not Lower on 2009 Subaru Forester to Install Curt Trailer Hitch
    So even after releasing the exhaust from all those mounts it still stayed in place? It must really be unwilling to move? Have you tried a gentle pull downward on the rear of the exhaust system? It could be bound up at a pipe connection somewhere and just needs a little persuasion. Also, make sure that you are releasing the exhaust from the hangers on both the passenger's and driver's side. There should just be 3 that you have to release it from. It did go pretty smooth when we installed...
    view full answer...
  • Installing Curt Custom Fit Trailer Hitch Receiver # 13147 on 2012 Subaru Forester
    Although I do not have specific recommendations for installers in your area, when it comes to installing the Curt Custom Fit Trailer Hitch Receiver, # 13147, on your 2012 Subaru Forester this is fairly simple so any local mechanic should be up for the job. I have attached a video to give you an idea of what the install entails.
    view full answer...
  • Do I Need to Remove the Exhaust on My 2011 Subaru Forrester to Install Curt Hitch # 13147
    You may only need to lower the exhaust system on your 2011 Subaru Forester to install this Curt Hitch, part # 13147. The mechanic maybe did not realize that you only had to lower it temporarily, and he thought you had to remove the whole system. Or maybe he did not realize that if you unhook the four rear exhaust hangers the exhaust will drop enough to allow you to install the hitch. The exhaust will have to be supported at this point to prevent any damage from being done to the exhaust. I...
    view full answer...
  • Trailer Hitch with Best Ground Clearance for 2009 Subaru Forester
    I have some great trailer hitch options for a 2009 Subaru Forester but they all sit just below the rear bumper fascia so there will be a slight reduction in ground clearance no matter which options you choose. I recommend the Curt Trailer Hitch Receiver part # 13147 which is a custom bolt-on fit. It does sit nice and snug to the rear bumper so the minimal ground clearance reduction should not create many issues. I cannot recommend modifying any trailer hitches but you're welcome to do...
    view full answer...
  • Trailer Hitch Recommendation for 2013 Subaru Forester that Doesn't Require Stabilizer Strap
    For your 2013 Subaru Forester I'd actually recommend the Draw Tite hitch part # 75650 over the Curt you mentioned as it does not require the use of the stabilizer strap when carrying a non-supported load like a bike rack. Curt seems a bit overly cautious with the strap recommendation, especially with a 2 inch hitch like the # 13147, but we have to recommend you follow their guidelines with their hitches otherwise the warranty will be voided. To answer your other question we have not personally...
    view full answer...
  • Replacement Hardware Kit for Curt Trailer Hitch 13147 for a 2012 Subaru Forester
    You certainly can order just the hardware to install Curt trailer hitch # 13147 on your 2012 Subaru Forester. You will need # RHK and just enter the hitch number and choose the Curt as the manufacturer where indicated. Once the order is placed our warehouse team will assemble the proper kit to send to you. I have included a link to the installation instructions for the hitch and a video showing a typical installation as well for you.
    view full answer...
  • Class III Trailer Hitch for 2011 Subaru Forester
    Of the options we offer for your Forester, I'd recommend the Draw-Tite Class III hitch, # 75650. The hitch crossbar and receiver opening would be fully visible under the rear bumper fascia as shown in the photo I've provided. The hitches we offer for your 2011 Subaru Forester would mount to the underside of the frame members. We don't offer a hitch that would install behind the bumper fascia and allow the receiver tube to pass through. If you click the provided link, you can see the hitch...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch w/ 2 Inch Receiver For Carrying Bike Rack on 2009 Subaru Forester
    The Curt Class III hitch you referenced, part # 13147 is indeed a fit for your 2009 Subaru Forester. However, I'd recommend the Hidden Hitch model, part # 87493. I make this recommendation because the warranty requirements of the Curt hitch state that a stabilizing strap like part # 18050 must be used on all non-trailer loads in order to preserve your warranty coverage. The strap isn't compatible will all vehicles, so I'll typically recommend the Hidden Hitch or the Draw-Tite brand which...
    view full answer...
  • Replacement Hardware Recommendation for a Hitch for a 2013 Subaru Forester
    Yes, since the hitches that are confirmed to fit the 2011 Subaru Forester also fit the 2013 models the hitch you have should easily fit on your 2013 model with the correct install kit. You will need the part # RHK. On the product page you will need to enter the part number for the hitch you have and the select the hitch manufacturer from the drop down menu and we will ship you out the correct hardware.
    view full answer...
  • Curt vs. Draw-Tite Hitch for a 2009 Subaru Forester XT
    Either the Curt Hitch # 13147 or the Draw-Tite Hitch # 75650 would work very well for you. The main difference between the two is the tube design like you noticed. There is not an advantage to having a round tube over a square tube hitch or vice versa. Some people just prefer the look of one over the other. Check out the picture I attached that shows both hitches installed on a vehicle so you can see which look you prefer. When determining the towing capacity of a setup you must always...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver for 2010 Subaru Forester
    A trailer hitch from a 2015 Subaru Forester will not fit a 2010 Subaru Forester. There was a change in the frame from 2013 to 2014 model years. For your 2010 Subaru Forester, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13147. If you will be towing with this receiver, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467. This custom-fit T-One connector plugs into your Subaru Forester's wiring harness, which is located...
    view full answer...
  • Comparing Trailer Hitch Receivers from Curt and Draw-Tite for 2011 Subaru Forester
    For your 2011 Subaru Forester, the Draw-Tite # 75650 hitch is rated for the same towing capacity and more tongue weight than the Curt # 13147. The Curt hitch is just as strong a hitch and because it is made in the USA is arguably made of better steel but it does based on their warranty require the stability strap # 18050 for a bike rack. There isn't any noticeable stability difference between the two hitches.
    view full answer...
  • Trailer Hitch Recommendation for a 2009 Subaru Forester for Carrying 4 Bike Rack
    Yes, the Curt hitch part # 13147 that you referenced is a Class III hitch that can have a 4-bike rack installed in it. The rack will have to be designed for a 2 inch trailer hitch. That being said I believe I have a better solution for your 2009 Subaru Forester since the Curt requires you to use a stabilizer strap like part # 18050 when carrying a non-supported load like a bike rack. Instead I would recommend the Draw Tite Class III hitch part # 75650 that has also been confirmed as a...
    view full answer...
  • Trailer Hitch for a 2009 Subaru Forester to Tow a Small Yard Waste Trailer
    Whether you are towing a trailer or carrying a bike rack the trailer hitch used will be the same. For your 2009 Subaru Forester I recommend Curt hitch # 13147. This is a Class III hitch with a 2 inch receiver so it is great for towing. I checked the owner's manual for a 2009 Forester and if the trailer does not have brakes then the capacity the vehicle can tow is 1,000 pounds. With brakes the capacity is 2,400 pounds. Check your owner's manual to verify. Since you plan on doing some towing...
    view full answer...
  • What Supports the Exhaust Once Hanging when Installing a Trailer Hitch on a 2012 Subaru Forester
    It looks like our installer attached the support strap to something in the vicinity of the anti-sway bar. It doesn't really matter what it is attached to as long as it is a solid structure that won't be damaged when supporting the weight of the exhaust. The strap is supporting the exhaust once it is lowered. It isn't hanging just resting on the support strap. This would not put undue stress on the exhaust manifold. If you plan on doing some towing I recommend etrailer ball mount kit #...
    view full answer...
  • Class III Hitch for 2009 Subaru Forester for Use with Hitch-Mounted Scooter Carrier
    The Curt Class III hitch # 13147 is a confirmed fit on your 2009 Subaru Forester. An installation video is linked for you. This hitch has a 2-inch receiver opening for Class III accessories like scooter or cargo carriers that have a 2-inch shank. One such example is the etrailer Motorcycle Carrier # e98873. This and others are shown on the linked page. The total combined weight of your scooter and the carrier you use all together must remain within the hitch tongue weight (TW) rating...
    view full answer...
  • Fit and Compatibility of Curt Class III Trailer Hitch on 2010 and 2017 Subaru Forester
    I wish I could say it was but the confirmed Class III round tube trailer hitch from Curt that fits the 2017 Subaru Forester is the # C13144. The # 13147 that you currently own fits 2009 - 2013 Subaru Forester All Models. There has since been a generation change which is why the previous hitch will not work with the newer vehicle. I recommend using this information to help you sell the current hitch you have to offset the cost of the new one. I have linked the above mentioned products...
    view full answer...
  • Do Draw-Tite and Curt Hitch Receivers Require Stabilizing Straps to Satisfy Warranty Requirements
    Curt Class I and II along with some of Curt's Class III hitch receivers such as # 13147 do require a stabilizing strap # 18050 to satisfy Curt warranty requirements. The strap is to be used with any non-trailer loads such as bike racks and cargo carriers. It is designed to significantly reduce bouncing of any hitch mounted accessories. Check out the attached review video of the strap installed on both a platform rack and hanging bike carrier. The comparable Draw-Tite Hitch Part # 75650...
    view full answer...
  • Which Trailer Hitch is Better for a 2010 Subaru Forester Draw-Tite 75650 or Curt Hitch 13147
    The Curt part # 13147 and Hidden Hitch part 87493 are similar designs as they are built to fit the same vehicles. There are a couple of key differences that may help you in making a decision. Curt uses a high-gloss black finish on their hitches and the Hidden Hitch is not so glossy. If you want a duller finish go with the Hidden Hitch. If you like high-gloss black, use the Curt. Additionaly, in this model, Curt uses round tube for the cross member and Hidden Hitch uses square tube. You...
    view full answer...
  • Trailer Hitch Replacement Hardware Recommendation for Curt Trailer Hitch on 2013 Subaru Forester
    We have replacement hardware for Curt trailer hitches as our part number # RHK. What you'll need to do is select the part number of the hitch you have on the product page and select Curt as the manufacturer. Since there are two Curt hitches available for your 2013 Subaru Forester you'll have to determine which you have. It's pretty easy to though. If you have a 2 inch hitch opening the hitch you have is the part # 13147. If you have a 1-1/4 inch opening you'd instead want the part # C12047.
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Video Edited:
Andrew K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Chris R
Video Edited:
Chris R
Employee Lindsey S
Written by:
Lindsey S
Employee Nicholas E
Test Fit:
Nicholas E
Employee Alan C
Video by:
Alan C
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-636-306-4830