bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Save $20 On Curt Hitches

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13650
lowest price pledge
Retail:$338.53
Our Price: $206.29
You Save: $132.24
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 37 lbs
Quantity: 
In Stock
Instant Rebate
13650 - 500 lbs WD TW CURT Custom Fit Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Lowest Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13650 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (480)
  • Q & A (0)
  • Photos
  • Why etrailer?

CURT Trailer Hitch - 13650

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • Visible Cross Tube
  • CURT
  • 350 lbs TW
  • 5000 lbs WD GTW
  • Custom Fit Hitch
  • 500 lbs WD TW

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 350 lbs
      • Maximum TW when used with weight distribution: 500 lbs
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13650 Curt Class 3 Trailer Hitch Receiver

Installation Details 13650 Installation instructions

This Product Fits The Following Vehicles





Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13650

Average Customer Rating:  4.8 out of 5 stars   (480 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

After much research about hitches for my 2008 Ford Escape I settled on etrailer because of the detailed information concerning installation. I am visually oriented so having video to guide me was a huge help! In just an hour I had the hitch done! I need to use a small trailer from time to time and the car had no hitch on it. This will help me when I need to make a trip to the dump, haul off spring clean-up and get my Pelican boat to the lake. If their were ten more stars to click on I would click on number 10 for sure!


Comments
Still looks brand new even after a North Idaho winter with all the road salt.
Randal - 07/14/2020

by:
2007 Ford Escape

This is a great place to order from. You can actually talk to a person.
I ordered a hitch for my 2007 Ford escape. It fit perfectly took about an hour to install including wiring harness.
Thanks



by:
2008 Mercury Mariner

Heavy duty, well constructed and smooth welds on the hitch I received. Like other reviews it had punctured the shipping box and I had a small spot missing the powder coating. I also did not need to use the thick spacer on my 2008 Mercury Mariner, the holes would not line up with it.



by:

Arrived quickly. Could have been packaged better. Everything needed to install included, went on easily and in about 20 minutes I was pulling my trailer like I needed to. Looks pretty good, I am happy with this hitch.



by:
2005 Ford Escape

Instructions say installs in 30 mins for professional and 60 mins for diy'er. Wrong. This is only true if you want to enlarge a existing hole large enough of pass through the bolt and brackets by grinding the metal unibody frame. I don't like grinding because latter it will rust. Even if you paint the spot latter it's better to find another way to pass through the harware. I removed the bumper and brackets to avoid grinding. This is why I'm a diy'er, because a shop probably would not repaint the exposed metal.



by:

Wow,
A year after the product was purchased
- very unexpected follow up by a retailer.

Must say it was one of the easiest automobile accessories to install given its size and weight. I was able to install the hitch frame myself in a friend's garage with the simplest of tools following the provided directions.

Fit like a glove, meets expectations, and despite a season in New England, still looks great under the rear bumper.

Highly recommend.



by:
Ford Escape

Custom fit. Easy to install. No modifications needed. Purchased it so my daughter could carry her (and her friends) bikes on a 3-bike carrier, when they went on a road trip somewhere. Opened up storage space in her Ford Escape, for their bags and camping gear. Hitch is even sturdy enough to haul my small towing trailer around, when it came time for her to move, with all her stuff!



by:

Good welding, good fit, good finish, easy installation. I will use it to tow a small trailer with my '05 Mazda Tribute. I opened the frame holes with an angle grinder and die grinder for extremely easy access (my frame is boxed). It took about an hour for prep, install, and cleanup (part of every job). All told- a very good value.



by:
2006 Mazda Tribute

Just completed the hitch install. It was very easy, had a little trouble around the exhaust but no big deal. Very nice hitch and shipping was fast. I will definitely recommend etrailer to anyone needing a hitch.


Comments
Had about a year now. Hitch is solid and no problems
Jeffrey M - 03/27/2018


by:
2007 Mercury Mariner

Installation was easy and the finish looks great. The only thing I would mention is that the instructions say a 2007 and later model year mariner/escape/tribute should have open ended frame rails and mine were sealed but a few minutes with some large drill bits took care of my access problem


Comments
I got it to use with those extra cargo carriers. it was pretty easy to install into the car even by myself. Ive used the rack several times and when its not being used I bought a logo hitch cover that I really like for the extra advertising space instead of bumper stickers. Ive debated towing a trailer with it but I dont have one and I havent yet purchased the lighting wire harness.
Marsolca - 12/12/2017


by:
Ford Escape

Trailer hitch receiver is awesome,bought it for my Ford Escape for the other half to tow her trailer and it works out great, etrailer.com is a great site to get all your trailers and towing needs!



by:
2008 Mercury Mariner

This is the 2nd Curt hitch I have installed in the past two years, the other being on my 1996 F150. This one (13650) I installed on my 2008 Mercury Mariner, and I continue to be impressed with Curt products. Everything lined up perfectly and the hitch went on easily, looks great, and is way more heavy duty than anything I would ever need on a Mariner. No drill required on this one, leave it in the toolbox. I would recommend Curt hitches to anybody. My only complaint is, and this happened with both this hitch and the one I installed on my pickup, is they show up looking like they were dragged BEHIND the FedEx truck instead of inside of it. I was able to spot-paint the areas that were dinged/scratched down to bare metal, but it was very close to being returned/exchanged based on my opinion of what's acceptable. Other than this issue, it's a great product.



by:
2011 Ford Escape

Thanks for the shipping upgrade and prompt delivery. The Curt hitch and wiring harness went on with ease just as advertised. I installed the hitch and wiring harness in my garage with the help of my 11 year old son (see attached photo). The video on etrailer.com was a terrific help. I am already looking for things to attach to my new hitch on etrailer.com. You have my business, and I will certainly pass along your web site to all in need of parts.



by:
2012 Ford Escape

Install was fairly easy and straight forward. Like some other reviews, using the spacer on the passenger side did not allow the side holes to line up with the frame even when tightened, so I removed it and all bolts tightened just fine. The 2 in receiver will give me the added confidence for a loaded bike rack and utility trailer.



by:
2012 Ford Escape

I don't like to buy products on line but I did it when I needed a hitch for my excape. The hitch showed up in 3 days with regular shipping that was free. I do not have a garage or many tools I I hope it fit correctly and would be easy to install like the add said. It fit like a glove and was installed in a hr. I will tell anyone I know needing trailer products to give etrailer.com a try .



by:
2007 Ford Escape

Great video install description. Fits like a glove on 07 Ford Escape hybrid awd.

I did the install alone so putting up hitch and bolting while holding the spacer in was tough, but nothing a little Duct the didn't help with.



by:

Etrailer is doing things right with fast shipping and accurate information. This CURT hitch and T-one wiring harness was quick and easy to install.



by:
2011 Ford Escape

We have yet to use the hitch, but we learned some valuable things when we installed the hitch on my 2011 Ford Hybrid Escape, which I wanted to pass along to others who may be struggling to install the hitch on a similar car.

1) Providing only 2 guide wires to guide the backing plates and the bolts through the frame is not enough. The guides start to deteriorate after a use or two, and we were nervous that they would come off before the plates and bolts were through the frame and in place. It would be GREAT if there were 6 wires included, one for each bolt.
2) There was only a vague reference to having to enlarge the holes in the frame to be large enough for the backing plates to fit through. While we were able to figure it out on our own, there is no clear indication that you would need to drill out the hole in the frame to make it large enough to pass the plate through.
3) Once the backing plates and the bolts were in place, there is nothing to keep them from being pushed back up into the frame when mounting the hitch. We made plastic retaining plates to hold the bolt and plate in place while we were mounting the hitch. This kept the hitch from “accidentally” pushing the bolt back up into the car frame.
4) The instructions said it would take a pro 30 minutes and a novice 1 hour. Ha! We found that very hard to believe. It took us a solid 2 hours to install the hitch given the challenges we ran into above.


Comments
Once the hitch was installed, we have had no problems with it. It works great for holding our mountain bike rack and bikes, which is what we bought it for. My Escape cant tow very much weight, so likely the bike hitch will all the hitch will be used for.
Nancy - 05/30/2019


by:
2012 Ford Escape

I installed this receiver on our 2012 Ford Escape XLT 4x4. Everything lined up perfectly. There was no interference from the the exhaust hangers. The fish wires worked great. The hardware slipped in easily from the end of the frame rails. I think it took a whole two beers from setup to cleanup to leisurely install this hitch.



by:
2012 Ford Escape

this product was as described and in excellent new condition when it arrived with in a week of ordering, no shipping charge. The hitch installed just as the instructions and the video outlined, using a floor jack I was able to install it by myself in less than an hour. looks great, solid and pretty.



by:
2009 Ford Escape

Great product easy to install the video on the web page was a lot of help. Very fast processing and shipping I will buy from etrailer.com again.


Comments
Its working out great I never dreamed we would use it so much.
Tim W - 04/25/2016


by:
2010 Ford Escape

Very nice fit. My only complaint was the thicker recommended spacer for above the exhaust caused the bolt to extend out at an angle and not far enough. I spent an extra hour trying to make this fit and then to remove it and install a standard spacer. This one hour job took me two hours. If I had another one to install it probably would only take me 30 - 45 minutes. I installed to use with a bike rack and possibly other cargo racks down the road.



by:
2012 Ford Escape

Purchased for 2012 Escape XLT w/3.0 V-6. Installed it by myself today, which took a bit of planning. These are not a light weight product. Everything fit perfectly. My only suggestion for etrailer would be to cut the fish wires about 5 inches longer. They are just a tad too short to fish from the farthest bold position. I used a short piece of an old fish tape to extend mine, and everything went smoothly.



by:
2010 Mercury Mariner

Very easy to do took less than 40 mins ( I did remove exhaust pipe from hanger for the install, just use some spray lube easy off, easy on) It was nice to have 2 bolt springs , one of mine got hung up & broke but having 2 in kit really helped.
I also removed the spare tire for the install was easy to do & made it easier to put on but not necessary.
I even used the box it came in to lay on the ground to do in my driveway, so easy to do without putting on a lift.



by:
2010 Ford Escape

I installed it today. Not hard but you need patience. I didn't lift my Ford Escape, didn't loosen muffler or drilled holes bigger. Driver side was the hardest because the end of the chassi hole was a little tight but I pride it open enough that I could squeeze the screw in. Once I got all the screws in I put the hitch in place. It's a tight fit so once you get it up it will hold. I then began to pull the screws through and put the nuts on. Warning!! The 2 screws that go at the far end opposite the rear bumper leave off. Use that wire to leave it on the 2 end screws. Once you have it on than fish the 2 bottom screws. I didn't do this so as I was fitting the hitch on I pushed up the screw too far and it fell inside the chassis. I was able to fish it out but definitely avoidable.I bought the wire kit quick plug in as my Ford has the hitch wire already.


25
480
Show More Reviews

Ask the Experts about this CURT Trailer Hitch



  • Do I Have to Drill to Install the Curt Class III Trailer Hitch on a 2009 Ford Escape
    On the 2007 and newer Ford Escape you should not have to drill to install this hitch. There should be space to fishwire the hardware through the end of the frame. If there is access to put the bolt and spacer into the frame rail from the end there is no need to drill. If there is not room in the end of the frame rail to install the hardware then you will have to enlarge a hole on the drivers side and drill a hole on the passengers side to get the hardware inside the frame rail, but you...
    view full answer...
  • Will the Curt Trailer Hitch # 13650 Fit on a 2010 Ford Escape with an Exhaust Dampener
    I spoke with my contact at Curt about the fit on your 2010 Ford Escape. She stated that as long as everything, including the anti-vibration weight you mention, is stock from the factory, then the Curt Trailer Hitch, # 13650, will fit. I have included a link to the instructions below.
    view full answer...
  • Bolt Fishing Wire for the Installation of a Curt Hitch on a 2006 Ford Escape
    Yes, 2 fishing wires are included with the intallation parts kit of the Curt Hitch # 13650. I have included a installation video for this Curt Hitch for your 2006 Ford Escape.
    view full answer...
  • Will Curt Class III Trailer Hitch # 13650 Fit 2006 Ford Escape
    Yes, the Curt Class III Round Tube Receiver Hitch # 13650 that you referenced is confirmed to fit and will work great on your 2006 Ford Escape. This custom hitch will line right up to existing holes in the Escape's frame rails for a no-drill installation and all the necessary hardware is included. The hitch features a 3,500 pound towing weight capacity, a 350 pound tongue weight limit, and will provide you with a 2 inch receiver. I have attached an installation video and an article you...
    view full answer...
  • Size Bolts to Install Curt Class III Trailer Hitch on 2011 Ford Escape
    The 6 bolts you should have received with the Curt Trailer Hitch Receiver # 13650 are 1/2-13 x 1 3/4 carriage bolts with the 1-3/4 number meaning the total length of the threaded bolt. This isn't a common issue with the bolts not working but you may need to use the drilling method as highlighted in the attached installation instructions. I have also attached an installation video that we made for this trailer hitch on a 2011 Escape that you can also reference.
    view full answer...
  • Correct Replacement Cover For Extang Tuff-Tonneau Cover # EX14650 On A 2019 Chevrolet Silverado
    It seems like you have the Extang Tuff-Tonneau # EX14650. This is the correct replacement cover for your 2019 Chevrolet Silverado 6.5ft bed # EX13650.
    view full answer...
  • What Vehicles Does The Curt Trailer Hitch Receiver 13650 Fit?
    The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13650 you got from your friend fits the 2005 - 2012 Ford Escape, 2005 - 2011 Mercury Mariner, and 2005 - 2011 Mazda Tribute. If you are missing any hardware or it is in need of replacement you can purchase new hardware using # RHK. You will need to select Curt from the drop down menu and then in the hitch item number box you will enter 13650. I included videos of both products for you to take a look at.
    view full answer...
  • Fit of Curt Class III Receiver Part # 13650 on 2005 Mazda Tribute with Full-Sized Spare Tire
    Any of the class III receivers offered for your 2005 Tribute, including the Curt model you reference, are compatible with a full-sized spare tire. The curved shape of the hitch fits around and below the spare tire, and will not interfere. I have provided a link to an install video for you to check out. The video shows a hitch from a different manufacturer being installed, but the hitch is similar enough to the one you referenced to give you a good idea of the placement. At the end of...
    view full answer...
  • Availability of Class II Weight Distribution Hitch on 2012 Ford Escape
    Weight distribution cannot be used with a Class II trailer hitch. Class II trailer hitches are not built for or tested for use with weight distribution so manufacturers do not make any systems that will fit a Class II trailer hitch. What you can do is replace the Class II hitch with a Class III trailer hitch, like # 13650, for your 2012 Ford Escape. This hitch has a tongue weight capacity of 350 pounds so the 200 pound tongue weight. But be sure to consult your vehicle owners manual to...
    view full answer...
  • Hitch Recommendation for a 2007 Ford Escape
    For a hitch for a 2007 Ford Escape you would want # 13650 as it has been confirmed as a fit. This hitch only fits 2005 - 2012 Ford Escapes though so the hitch you have now would not fit since it came off of a 2003 which is different. I attached an install video for you to check out as well.
    view full answer...
  • What Vehicles Does Pro Series Hitch 51027 Fit
    The Pro Series hitch part number you mentioned is pretty old but it fit 1995-2003 Ford Windstars. It's basically now the Draw Tite part # 75055 as Pro Series was bought out by a company that also owned Draw Tite.
    view full answer...
  • Replacement Hardware Kit for the Curt Trailer Hitch Receiver Part # 13650
    In order to obtain the bolts to attach the Curt Trailer Hitch Receiver part # 13650 to a 2005 - 2012 Ford Escape, 2005 - 2011 Mercury Mariner, or a 2005 - 2011 Mazda Tribute you would want to use the Replacement Hardware Kit for Trailer Hitches part # RHK. Once you have arrived at the product page for the replacement hardware kit, you will need to enter "13650" in the Hitch Item Number box and "Curt" in the Manufacturer drop down in order to receive the correct hardware. The replacement...
    view full answer...
  • Where is the Draw-Tite Hitch 75751 for a 2011 Ford Escape Made
    The Draw-Tite Max-Frame Trailer Hitch Receiver part # 75751 is made in Mexico. If you are instead looking for a made in USA trailer hitch for your 2011 Ford Escape then you would want the Curt Trailer Hitch Receiver part # 13650. I have attached an install video and photo of the Curt hitch for you. The Curt hitch does have a lower capacity than the Draw-Tite but the vehicle will be your limiting factor to the point where this would not be an issue.
    view full answer...
    Image 1 for
  • Two Inch Trailer Hitch Receiver for 2005 Ram 1500
    The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13650 is not a fit for your 1997 Dakota or 2005 Ram 1500. It is fit for 2005 - 2012 Ford Escape, 2005 - 2011 Mercury Mariner, and 2005 - 2011 Mazda Tribute. For your 2005 Ram 1500 you will want the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13333 which also does not fit a 1997 Dodge Dakota. It sounds like you have a hitch from a Dakota and it will not fit your Ram.
    view full answer...
  • How Do You Remove An OEM Hitch Receiver For A 2005 Ford Escape
    You should be able to unbolt the hitch receiver from your 2005 Ford Escape. If not, it is part of the bumper assembly. In this case, to remove the hitch receiver, you will have to remove, and replace, the bumper. We do not have the instructions or a video for removing your old hitch receiver. Nor do we sell a replacement bumper assembly for your vehicle, However, you should be able to get some of this information from where you purchase the replacement bumper assembly for the 2005 Ford...
    view full answer...
  • Round Tube Trailer Hitch Recommendation For A 1999 Chevrolet C/K Series Pickup
    I wasn't able to find any information based off that sticker, however we do have plenty of options that directly fit your truck if you're interested. For your 1999 Chevrolet C/K Series Pickup, I recommend going with the Draw-Tite Max-Frame Trailer Hitch Receiver # 37133. This hitch has very similar weight ratings, and has a higher weight capacity than the hitch you are inquiring about, at 750 lbs maxium tongue weight with a WDS, and 7,500 lbs maxium GTW with a WDS.
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver For A 2008 Ford Escape Hybrid
    For your 2008 Ford Escape Hybrid I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13650. Curt manufactures their hitches in the US unlike their competitor Draw-Tite so you can rest assured that your hitch has been rigorously tested and made for quality. Curt is also known for having a longer lasting gloss black powder coat finish over protective base coat that offers superior rust resistance when compared to their competitors. This hitch simply bolts onto the...
    view full answer...
  • Could Trailer Hitch from 99' Dodge Durango Fit 2006 Hyundai Tucson
    For a 2006 Hyundai Tucson a hitch from a 1999 Dodge Durango would not work. You'd need to go with a hitch like the Curt # 13526 which is custom fit for your vehicle. Hitch fits are very specific and typically only fit a vehicle model for a few years before updates to the vehicle require a new fit so fits between vehicle manufacturers is incredibly rare.
    view full answer...
  • Is The Curt 31650 Hitch a Front Mounted Hitch For 2008 Mercury Mariner
    The Curt Front Mount Trailer Hitch Receiver # 31650 is meant to go on the front of your 2008 Mercury Mariner. However, if you are looking for a hitch for the rear of your '08 Mariner, there is an option for that as well with the following part: - Curt Trailer Hitch Receiver # 13650
    view full answer...
  • Replacement Mounting Hardware For Curt Trailer Hitch Receiver # 13650
    You will need to order a Replacement Hardware Kit # RHK. Once on the product page you will select Curt from the drop down box and put in the hitch number as 13650. This will give you the hardware you need for your Curt Trailer Hitch Receiver # 13650.
    view full answer...
  • What Vehicle Does Trailer Hitch # CRT-13281 Fit
    From my research a CRT-13281 is the same trailer hitch as our # C13281 which fits a Kia Sportage from 2017 and up. If you have a different vehicle and need a trailer hitch let me know the year, make, and model.
    view full answer...
  • Which Ford Escape Modesl are a Confirmed Fit for the Curt C13186 Hitch
    The Curt Trailer Hitch Receiver # C13186 is a confirmed fit for the Ford Escape on the 2013-2019 models. Outside of this range of years, the # C13186 is not confirmed to fit. I see that you put an 08 Escape in our vehicle fit guide. I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13650 if you are looking for a hitch for the 08 Escape. I have attached an installation video for your reference.
    view full answer...
  • Hitch, Wiring, and Ball Mount Recommendations for a 2009 Ford Escape
    For your 2009 Ford Escape the Curt Hitch part # 13650 would be an excellent choice for a hitch. I attached an install video for you to check out as well. For trailer wiring you would want the Tow Ready Wiring Harness part # 118551. Install video attached as well. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
    view full answer...
  • Does Curt Trailer Hitch Part 13650 Extend Beyond the Rear Bumper
    All of the 2 inch hitches currently available for the 2009 Ford Escape, Curt, Draw-Tite, and Hidden Hitch, will extend beyond the bumper some, but not a whole lot. In a lot of cases it comes with the territory of a 2 inch hitch. The larger hitches are capable of more weight and more accessories, but that larger size makes the hitch more visible and in many cases it will stick out a little bit beyond the vehicle. I have added a link to a picture of a Class III hitch, installed on an Escape...
    view full answer...


< Previous
123. . .5



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Randy B
Test Fit:
Randy B
Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Andrew K
Video by:
Andrew K
Employee Kathleen M
Video by:
Kathleen M
Employee Chris R
Video by:
Chris R
Employee Zach D
Video by:
Zach D
Employee Lindsey S
Written by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.