bing tracking image
  1. Trailer Wiring
  2. Draw-Tite
  3. Wiring Adapters
  4. Single-Function Adapter
  5. 4 Flat
  6. Plug and Lead
48" Car and Trailer End Loop 4-Pole

48" Car and Trailer End Loop 4-Pole

Item # 18044
lowest price pledge
Our Price: $9.34
You Save: 53%
Trailer Wiring
Orders above $99 qualify for Free Shipping
Shipping Weight: 0.31 lbs
In Stock
48" Car and Trailer End Loop 4-Pole 4 Flat 18044
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images


Need help with installation?
Locate installers near me
Lowest Prices for the best trailer wiring from Draw-Tite. 48" Car and Trailer End Loop 4-Pole part number 18044 can be ordered online at or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (44)
  • Q & A (0)
  • Videos (1)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Wiring - 18044

  • Wiring Adapters
  • Single-Function Adapter
  • 4 Flat
  • Plug and Lead
  • 0 - 5 Feet Long
  • 4 Flat
  • Draw-Tite

4 Pole Trailer Connector Loop

  • 48" 4-Pole Loop
  • Includes 4 Wire Taps

Tow Ready # 118044 by Draw-Tite, Hidden Hitch and Reese

118044 48" Car and Trailer End Loop 4-Pole

California residents: click here

Video of 48" Car and Trailer End Loop 4-Pole

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.

Video Transcript for Draw-Tite Wiring - Wiring Adapters - 18044 Review

Today we're looking at part number 18044 from Draw Tite. This is a 48 inch car and trailer end loop with a four pole at each end. What it does it gives you a 48 inch extension that you don't have now between your vehicle and your trailer. This end plugs into your vehicle. If you decide that you would rather hard wire this into your vehicle rather than plug it in you can remove the connector and then use the included wire taps here to hard wire. The other end plugs into your trailer and there you have a 4 foot extension that you didn't have before.

That's it for part number 18044. The 40 inch car and trailer end loop with a four pole at each end.

Customer Reviews

48" Car and Trailer End Loop 4-Pole - 18044

Average Customer Rating:  4.9 out of 5 stars   (44 Customer Reviews)


See what our Experts say about this Draw-Tite Trailer Wiring

  • Which Trailer Connector Will Fit T-One Vehicle Wiring Harness 118554 on a 2010 Jeep Liberty
    Once the 118554 harness is connected to your 2010 Jeep Liberty it will connect to any trailer with a flat four pole harness. If you need a flat four pole harness for your trailer we do have one available. You could use part # 18044 and cut off the vehicle side connector since you do not need it and attach the other end to the wires on the trailer. If your trailer has a different style connector, like a 5/6/7-Way connector, let us know and we can find you the other parts you would need.
    view full answer...
  • Are Car and Trailer End Loops # 9653P and # 18044 Each One Piece of Wire of Two Pieces
    The Car and Trailer End Loop, # 9653P, is one l2 inch long piece, just as it appears in the picture. The Car and Trailer End Loop 4-Pole, # 18044, is also one 48 inch long piece. It comes with quick splices in case one of the 4-Way connectors needs to be clipped off to splice bare wires. You can see this harness in use at about the 2 minute, 58 second mark of the video linked below.
    view full answer...
  • How To Wire a Gooseneck Trailer from Scratch with Just Trailer Lights
    You should not need any extra fuses. Trucks like the Dodge Ram 2500 are built for towing and should have enough power on those circuits. First I would wire the lights to the trailer and worry about the 6-Way last. I would wire the lights with the standard color code. That way if you sell the trailer or have to work on the wiring in the future, it is done in the standard method. The white wire is ground and should be attached securely to the trailer frame. It is best to have direct contact...
    view full answer...
  • Can T-One Vehicle Wiring Harness # 118427 Be Routed Outside and Under a 2008 Honda CR-V
    On a 2008 Honda CR-V, you could mount the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118427, on the outside of the vehicle instead of on the inside like shown in the video linked below. What you will need to do is find a grommet or exit port at the bottom of the cargo bay (you will probably have to remove the spare tire). You will need to cut a small slit in the grommet to fit the wires through. After cutting the grommet, be sure to seal it up with some silicone sealant...
    view full answer...
  • Can you Route a 4-Way Trailer Connector Under the Vehicle on a 2009 Volvo XC70
    Many vehicles will have grommets somewhere in the rear cargo area that will allow you to route wires to the underside of the vehicle. The grommets are typically found behind the rear trim panels, in the spare tire well, or under the threshold. When we installed the Curt Wiring Harness Kit, # C59496, on a 2011 Volvo XC70, we found a grommet just under the spare tire (see photo). The 2011 XC70 is the same generation as your 2009 XC70, so you should have this grommet as well. Sometimes the...
    view full answer...
  • Need 4-Pole Extension Wire for Cargo Carrier Light Kit # 52014
    We do offer a 4-foot extension wire equipped with 4-pole flat vehicle- and trailer-side connectors, part # 18044 from Draw-Tite. If this is longer than you need we also offer a 1-foot extension, part # 9653P, which also provides the same plug-in extension capability. No cutting or splicing is required for either extension. I recommend an application of dielectric grease on all connections when you install your light kit. We offer this (part # 11755) but it is also available locally at...
    view full answer...
  • Cargo Carrier Light Kit for etrailer Cargo Carrier
    For the 24x84 etrailer Cargo Carrier for RV Bumper, # e96ZR I recommend the Cargo Carrier Light Kit, # 52014. Use 48" Car and Trailer End Loop 4-Pole, # 18044 for an extension if needed.
    view full answer...
  • Extension Cable Available for the LED Light Kit for Railed Cargo Carriers, # 98174LED
    Installation of this LED light kit wiring, part # 98174LED, may vary slightly depending on the specific cargo carrier you have and whether the wiring harness to the LED light assemblies has to be run underneath the cargo bed versus being threaded through the carrier deck. (This will depend on how large the openings are within the deck material). I have included a video link for this product that you may find helpful. We do have both 12 inch and 48 inch 4-pole connector extensions available....
    view full answer...
  • 4-Way Flat 24 Inch Extension Recommendation
    For a 24" 4-Way Flat extension we have the Hopkins Endurance Easy-Pull # HM47004. I like this design because there is a big loop for the connector so it's easier to disconnect the 4-Way ends instead of chancing some damaged wiring. If you'd rather use a standard 4-Way extension then you can use the part # 18044 you mentioned and just bundle some of it up with a zip tie, like what we find with the kit # DW05724-10, to take up the slack. Attached is a review video for you to check out.
    view full answer...
  • Wiring Harness for 2015 Land Rover Evoque to Connect to Lights on Bike Rack
    In order to connect the LED Light Kit # 98174LED to your 2015 Land Rover Evoque you will need a trailer wiring harness with a 4-Way flat trailer connector, such as the ZCI Circuit Protected Vehicle Wiring Harness with 4-Way Flat Trailer Connector and Installation Kit # 119250KIT. This wiring harness will install on your Evoque without requiring you to cut or splice into the factory wiring on your vehicle. The harness has zero-contact interface sensors that read the signals of the factory...
    view full answer...
  • Recommendations for a 7-Way to 4-Way Coiled Extension to Flat Tow a Jeep Liberty Behind a Motor Home
    The Hopkins Heavy-Duty, Coiled Trailer Connector Adapter, # HM47075, measures 3 feet long when stretched. This will most likely not be long enough for most flat towing applications unless the 4-Way end on the vehicle has some slack that you can pull out. You could just add a 4-pole loop, # 18045, which will provide another 60 inches of length. There is also a 48 inch loop, # 18044. A longer coiled cable is not available unless you use # RM-1064-B (8 feet long) and then wire in 4-Way flats...
    view full answer...
  • Recommendation for a Trailer Side 4-Way Flat Connector on Trailer Towed by 2006 Toyota Highlander
    We have a 20-foot 4-Way trailer side connector, # A20WB. This is a wishbone harness which means that the running light signal is split at the plug and the signal is sent along to each tail light rather than using a jumper wire between the two tail lights for the signal. We also have a 35-foot harness, # A35W42B, that works the same way. I have included a link to a video showing this harness being installed for reference. Either harness will be compatible with the T-One Vehicle Wiring...
    view full answer...
  • Lighting Functions and Extension Cable for the Tow Ready Tow Light Kit
    The Tow Ready Magnetic Tow Lights - Red Incandescent - 4-Way Flat Connector - 20' Long Harness Item # 73864, provides stop, turn and taillight functions for flat towing. If you need an extension There are several options depending on the length that you need. If 48 inches would be long enough you can use the 48 inch Car and Trailer End Loop, # 18044. If 60 inches is needed use the 60 inch Car and Trailer End Loop, # 18045. If you need a custom length wire you could purchase a 4-Pole Trailer...
    view full answer...

Do you have a question about this Trailer Wiring?

  • Why

    At we guarantee:
  • Highest quality trailer wiring for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer wiring information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Michael H
Expert Research:
Michael H
Employee Cole B
Installed by:
Cole B
Employee Alexander C
Updated by:
Alexander C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-636-306-4830