2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
(2390 reviews)
Price: $26.92
In Stock
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
Item # 19286
Retail:$32.47
Our Price: $26.92
You Save: 17%
In Stock
- All Info
- Reviews (2390)
- Q & A (0)
- Videos (3)
- Photos
Draw-Tite Trailer Hitch Ball - 19286
- Trailer Hitch Ball
- 2-5/16 Inch Diameter Ball
- 1-1/4 Inch Diameter Shank
- Standard Ball
- 12000 lbs GTW
- Class IV
- Class V
- Chrome-Plated Steel
- 2-3/4 Inch Shank Length
- Draw-Tite
Durable steel ball has a 1-1/4" diameter x 2-3/4" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.
Features:
- Hitch ball provides a connection point for your trailer's coupler
- Fine threads provide exceptionally tight, strong grip
- Durable steel construction
- Corrosion-resistant chrome finish
- Built-in wrench flats make it easy to hold ball in place while tightening the nut
- Lock washer and nut included
Specs:
- Ball diameter: 2-5/16"
- Shank dimensions: 1-1/4" diameter x 2-3/4" long
- Weight capacity: 12,000 lbs
- Fits ball mount platforms 3/8" to 1-1/4" thick
- Limited lifetime warranty
63834 Draw-Tite 2-5/16" Hitch Ball with Medium Shank - 12,000 lbs GTW - Chrome
California residents: click here
Video of 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Draw-Tite Chrome Hitch Ball Review
What's up everybody It's AJ with etrailer.com. Today, we're gonna be checking out this Draw-Tite "2-5/16" ball. With a weight capacity of 12,000 pounds. Now it also has a diameter down here of the ball of inch and a quarter. So, just make sure you get the right Ball Mount for it to go on. Let's check it out.
It's gonna be a solid steel construction, we also have Chrome plaiting around the outside. So it's great for those heavy duty instances, you don't have to worry about leaving it outside. Also has this nut and locknut included with it, so you don't need hardware. It comes with all the hardware you need to get it put onto your Ball Mount. Speaking about the Ball Mount, you wanna make sure you get a Ball Mount that can handle this weight.
So this is right for 12,000 pounds. You wanna to make sure that the Ball Mount does too, so this one is also 12,000 pounds. So that's good to know that you can run on that and you wanna always go with the lowest tow rating. So let's just say the hitch was rated for 10,000 pounds, then we default to 10,000 pounds. 'Cause we don't wanna max out the hitch.
If you're not sure of what kind of coupler you have on your trailer, it's usually listed on your trailer. You can see here it says "2-5/16" coupler or ball is what we need for this coupler. So that's how I knew which ball to go with this trailer. So when you're ready to attach your ball, there's two things that you wanna make sure. Is the ball size being "2-5/16", make sure that's right for your coupler.
And then make sure the diameter is correct for the shank or the Ball Mount you're gonna put it on. So, this one's gonna be an inch and a quarter of a diameter. So we know this is gonna fit this. Gets right in there, you drop that. Now it's got the included lock washer and the nut here. We're gonna get this tightened up by hand. Just get it started, until you get it as tight as you can. Then we'll come back with tools, and torque it down. So we got our tools and need a pretty big wrench for this. It's gonna go on here on the flat side of the base of the ball. That flat side's made so that wrench can go on there, when you go the torque it. And we got the socket at the bottom, and our torque bar. And that's what we're gonna lift up there and torque. And obviously here, it's pretty beefy. So, it's gonna be hard to do it this way. So there's a couple different things you can do. One of 'em is if you have a vice in your garage, you gonna flip this around, put the vice on this part and that'll hold that in place. And you can use your torque bar, and socket to tighten it down that way. We're using the hitch right here, just to hold in place. And since we have a shop, we have a bunch of different sockets and the torque bar. And the torque bars are sold separately, as well. You will need this to do the specific torque ratings that are in the instructions and they're pretty hefty. So you might have to rent one from an auto parts store, just to torque this down. But what we're gonna do to help us out with tools we have is flip it to the side. So that's gonna be easy to hold the wrench, and use the torque bar at the same time. Now this way, it's gonna make it much easier 'cause the wrench kind of just sits there like that. And then our torque bar will go on the other end. So I'm gonna hold the wrench with this hand, just to get it started. Now, if you have an extra set of hands might not be a bad idea to have somebody hold the other ranch. Just so you can focus on torquing down the other side. But right now these are the early stages, so we just need to get it started. Only thing left to do is lower it down and get it hooked up to our trailer. With the safety chains hooked up, we're ready to hit the road and get towing. It's a really good heavy duty ball. Just make sure you get the right heavy duty Ball Mount that goes with it. That way you can maximize that weight capacity. Well, I think that does it. Thanks for hanging out and I hope this helped..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Did not arrive in time
- Wrong item was ordered
- etrailer mistake
Customer Reviews
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs - 19286
Average Customer Rating: 4.8 out of 5 stars (2390 Customer Reviews)
Durable steel ball has a 1-1/4" diameter x 2-3/4" long shank. Built-in wrench flats ease installation. Chrome finish resists corrosion. Fine threads provide strong grip. Lock washer and nut included.by: Gregory08/07/2023
Kimberly was extremely helpful and knowledgeable about the product I was interested in purchasing. She patiently answered all of my questions and followed to let me know my item had shipped. Actually came 2 days earlier than expected b/c I making preparations for a race which helped tremendously!!!
by: Mark 06/05/2023
Great product for a great price. Will be back but I don't think it will be for anyone replacements as these will last my lifetime!!!
by: Jesse 06/14/2023
Perfect fit for the ball mount I bought this for. Dimensions are accurate.
by: Zachary08/16/2023
Great quality. Fit and finish excellen t.
by: Jeffrey11/15/2019
Excellent advise for proper product. Needed to clear my tailgate away from trailer jack so solution was offered to extend ball mount back 3 1/2”. Perfect solution.
by: Michael 08/03/2023
Works as intended
by: Steven05/05/2022
We use this trailer ball to pull our 20' cargo trailer. We moved from northern Arizona to western Kansas with the trailer. Seven trips overall, and no problems with the hitch. Holding up great!
by: Randall04/30/2022
Does the job, got a little wear on the top of the ball right away which might have been due to me having skimped on the hitch grease but it's held up after a dozen plus outings. Still, maybe a bit more resilience might be nice. Not afraid to get another given the price though.
by: Larry05/10/2022
The products are great, but the packaging sucked. I ordered 2 trailer balls that were unpackaged so they rolled around in the box damaging the threads. My drop hitch was sticking out of the box
by: Robin 01/28/2023
etrailer is the best!
by: Mark 03/29/2023
They were very knowledgeable about products, pricing was good, and delivery was
quicker than expected. Peyton did a great job!
by: Erik D.12/24/2017
Seems like a good product. Only aggravation was not being able to find a 1 7/8" socket or a torque wrench that went to 450lb. to mount it. Luckily my trailer dealer mounted it for me, though probably with an impact wrench.
Comments
keeping it greased, its worked fine and still has its chrome plating
Erik D - 12/24/2018by: Rick W.07/08/2017
I purchase a used trailer recently and have made several purchases from etrailer to include a Straight-Line Weight Distribution Hitch (RP 66084), 2 5/16 Ball (19286), RV Generator Plug (CAM 55333), Aqua Hose, sealing trim for roof and side seams etc...
All of the products have arrived on time and are of high quality. The trunnion bar holes on the RP 66084 were missed drilled so I called etrailer(Laser) and he shipped me out replacement bars which arrived sooner than expected along with a return label for the miss-drilled bars.
Products are quality, service is quality and inventory is exceptional.
It is a pleasure doing business with them.
by: Ray12/18/2014
My F150 had an OEM 4 pin trailer plug and hitch.
The 118242 - 7 pin connector with wiring harness is the ticket. The hardest part of the install was dropping the spare tire. The plugs connect directly to the factory plugs and the harness length is the correct length.
The 3035-P brake controller connector harness was just as easy. Plugs right in to the OEM plug next to the ECM connector and the other end into the brake controller.
The PK12711U-26 - 7 pin bracket and hardware kit fastens directly the OEM bracket that is on the hitch. My truck had an OEM 4 pin trailer towing set up with the hitch. The OEM hitch had the bracket welded on it to attach the 7 pin mounting bracket to it.
These kits make this install very easy and professional looking.
If I have one complaint, the hardware kit to attach the 7 pin connector bracket is set up to fasten the bracket directly to the bumper with 2 - self tapping screws provided in the kit. The kit also includes 4 #12 machine screws with toothed washer nuts to attached the 7 pin connector to the bracket. This is fine if your truck hitch doesn't have an attaching bracket welded to it. The kit should included in it 6 #12 machine screws and nuts along with the 2 self tapping screws. Since my OEM hitch actually had a bracket welded to it to attach the 7 pin bracket to it, I had to use two other #12 screws and nuts to attach the 7 pin bracket to the OEM bracket on the hitch. Not a big deal, just a thought.
It took me about 2 hours, start to finish to install the 7 pin connector, trailer controller, and add the two relays in the OEM relay/fuse box under the hood.
I highly recommend these kits.
by: Jonathan 03/09/2023
As usual great helpful staff
by: Jack 08/14/2022
Fits perfectly on the new hitch fast sh ipping
by: Richard03/10/2018
With this hitch I now feel safe towing my 6k lb, 26' travel trailer with my 1500 pickup truck. Just finished a 2200 mile trip. Also I like the fact the new hitch puts the trailer a little further behind the truck because I can open my tailgate fully when hitched. Like another fellow, I had to drill out the hole for the spring bar cover pin.
by: Michele08/28/2020
What awesome timing ! I was just looking up where I can post a review and here we are. I can't say enough how very very pleased my husband and I are. Great quality fast delivery i can't say enough. Thank you we will be ordering again from you !
by: Jim H.07/17/2014
Going to cut the threads off and use as part of my security/lock system on my car trailer.
Comments
Fine, no issues.
Jim H - 07/17/2015by: Tom M08/10/2017
The weight distribution hitch I purchased is outstanding. Quick shipping, easy to install, and excellent service and information at etrailer.com. Just used the hitch to go camping. What a difference it made in towing my camper. I also made several sharp turns both forward and in reverse with no problems. I highly recommend this product.
by: Thomas05/14/2019
I needed a weight distribution system that would allow me to safely tow my 8,000# boat and trailer. James was very helpful suggesting the best rig for my application: surge brake compatible, able to be backed up while connected, and properly sized given my tongue weight. I also needed the pole tongue adapter. I was amazed that the parts arrived just two days later! I have done a pre-install check and all will fit beautifully. etrailer and James did an outstanding job from selection to delivery!
by: John J.08/10/2015
Weight Distribution hitch, & hitch ball.
It is so easy to place orders, confirmation and tracking number sent as soon as item is shipped (very fast process), products arrive on time and in great shape. Easy to follow instructions, trailer is set up and ready to roll. Pulling a 2016 Rockwood Mini Lite, with a 2012 Ford F150
by: Dave T03/20/2017
Great ball.. Super tough. Good luck finding an 1-7/8" socket and a huge torque wrench.
Comments
Still a great ball. No rust.
David T - 03/20/2018
by: Bob T.08/26/2012
The RB2 hitch and hitch ball arrived in a matter of days after I placed the order. I was very impressed with the customer service follow up from the time I placed the order until I received the order. The excellent flow of information kept me well informed.
I installed the hitch per the instructions, and it was relatively easy to follow the instructions and get the intended results. I spent about an hour doing the installation, and it could have been faster, but I wanted to go slow and make sure I understood each step. This was the first time I had installed a weight distributing hitch, so it was important to be careful. Very happy with the hitch, and happy with the entire process of ordering from etrailer. Will do business again.
25
2374
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch Ball
- Dimensions of Draw-Tite 2-5/16 Inch Hitch BallSome dimensions of the 2-5/16 inch hitch ball # 19286 are shown in the attached diagram. The shank is 1-1/4 inches in diameter and is 2-3/4 inches long. Overall it's about 6 inches tall, aboput 3 inches of that being from the bottom of the base to the top.
view full answer...
- Where to Find the Hitch Ball Size for a Trailer CouplerThat's not info we have available to us since the manufacturers don't list it. It's also not uncommon for trailer owners to change couplers which can sometimes change the ball size. Most likely your trailer has a 2 inch ball or a 2-5/16 inch ball like the # 19286 you referenced. Your best option would be to contact the seller and ask what size ball the coupler has listed on it as it will be stamped there.
view full answer... - What Size Socket is Needed to Tighten Trailer Hitch Ball # 19286You will need a 1-7/8 inch deep well socket for the 1-7/8 inch nut on ball # 19286. To install the ball you can use a bench vise to hold it while torquing down the nut or if a vise is not available you can put the ball mount in the hitch so the ball is facing to the side instead of up.
view full answer... - Can a Trailer that Requires a 2-5/16 Inch Ball be Towed Using a 2 Inch BallYou will want to match the ball you use with what the trailer coupler requires. It is definitely possible that the coupler could come off of the ball if you are using a ball that is too small for the coupler. We have many 2-5/16 inch balls. I have included a link to them for you. You will need to make sure that you get one that has the right shank diameter to fit your ball mount's ball hole.
view full answer... - Trailer Ball For Blue Ox Sway Pro weight Distribution SystemWe do offer some trailer balls that might work better for you. I recommend the Tow Ready Hitch Ball, part # 19286. This has a medium shank and is rated for 12,000 lbs. The shank is 1-1/4 inch diameter and is 2-3/4 inches in length. I have attached a product review for this trailer ball you can check out.
view full answer... - How To Install A 2-5/16 Inch Hitch Ball To A Draw Bar That Has Limited Access to the Hitch Ball NutIt sounds like you might have the 2-5/16 inch hitch ball on a weight distribution head assembly which can limit the access to the hitch ball nut. The weight distribution head is bolted to the the shank that inserts into the trailer hitch. I am including a link to a picture of what a weight distribution head might look like to help you decide if that is what you might have. To tighten the nut on the hitch ball you will need to use a 1-7/8 inch socket instead of a wrench. The socket should...
view full answer... - What Size Socket is Needed For 2-5/16 Inch Hitch BallMost of the 2-5/16 inch hitch balls will use either a 1-inch diameter shank or 1-1/4 inch diameter shank. The nut size on a hitch ball with a 1-1/4 inch shank, like the Tow Ready 2-5/16 Inch Hitch Ball, part # 19286, will use a 1-7/8 inch socket. A 2-5/16 inch hitch ball with a 1 inch shank will use a 1-1/2 inch socket. The torque specs on a hitch ball with a 1-inch diameter shank is 250 ft. lbs and on a 1-1/4 inch diameter shank is 450 ft. lbs
view full answer... - Availability of 2-5/16 inch Hitch BallSounds like you are looking for a standard 2-5/16 inch hitch ball like what the # 19286 you referenced is. This ball has a 12,000 lb capacity, a 1-1/4 inch diameter shank that is also 2-3/4 inches long. Price is available at the attached product links. I attached a review video for this for you to check out as well.
view full answer... - Recommended Hitch Ball Size for 36 Foot Camper by KeystoneFor that large of a trailer I would almost guarantee it's a 2-5/16 inch hitch ball like the # 19286. This ball has a 1-1/4 inch diameter shank and a 12,000 lb capacity.
view full answer... - Hitch Ball Size for Arctic Fox 25Y Travel Trailer and SwayPro Weight DistributionThe required ball size for your Arctic Fox 25Y travel trailer will be stamped on the coupler. Based on the specs I was able to find it looks like you will need a 2-5/16 inch ball for your SwayPro weight distribution system. You can use # 19286.
view full answer... - Troubleshooting Hitch Ball Mount When Nut is Welded to Ball MountFor the 2-5/16" Hitch Ball # 19286 you generally would want to use the lock washer on the underside. Due to the fact that you have a welded nut there, you cannot use the lockwasher and should not use it on the other side of the platform. I recommend checking your hitch ball for a proper fit before towing each time as that ball may work its way loose. Unfortunately we don't carry a threadlocker compatible with that size nut, but that may help as well. You may want to simply change out...
view full answer... - Options For 1-7/8" Trailer Hitch BallI am not familiar with 1-15/16" trailer ball. We do carry 1-7/8" ball which are very common and close to that measurement. You want to make sure the hitch ball hole in the your ball mount is compatible with the shank diameter of the ball. I have attached a link to our 1-7/8" trailer balls. They either have 1" shank, 3/4" shank or 5/8" shank. For example the Draw-Tite 1-7/8" ball part # 19256 has a 3/4" diameter shank. I have attached a video for your reference.
view full answer... - What Size Hitch Ball Does a Keystone Passport Ultra Lite Grand Touring 2920BH UseUnfortunately, there is no way for me to know what size hitch ball the coupler on a Keystone Passport Ultra Lite Grand Touring 2920BH accepts. It will more than likely be either a 2" hitch ball or 2-5/16" hitch ball. The only way to know for sure would be to look at the coupler itself as the correct size will be stamped into it or call the manufacturer with your VIN. I have linked our selection of hitch balls for you once you know both the diameter of the ball/shank.
view full answer... - Trailer Hitch Ball with 2-5/16 inch Diameter and 1 or 1-1/4 Inch Diameter ShankYes, there are many 2-5/16 inch hitch balls that have a shank with a 1 inch or 1-1/4 inch diameter. The most popular is # 19286. This one has a 1-1/4 inch diameter shank. It is rated for 12,000 pounds. I have included a link below to our 2-5/16 inch hitch balls. You can use the filters on the left side of that page to select the shank diameter to see the available balls that fit that description.
view full answer... - How to Determine Hitch Ball Size Needed for R-Vision Travel TrailerTo determine the correct hitch ball size for your R-Vision Travel Trailer, you will just need to look at the trailer's coupler. The hitch ball size it is compatible with should be stamped into the coupler's metal housing or may be located on a safety sticker. Once you find what size hitch ball you need, you will just need to make sure the shank diameter and length is compatible with your existing ball mount. Lastly, you will need to make sure the hitch ball you choose has the required...
view full answer... - Inexpensive Weight Distribution System for a Trailer with Varying Weights and a 2003 Chevy TahoeFor your situation I recommend going with a weight distribution system that has a wide tongue weight capacity range. Reese system # 49570 has a tongue weight capacity range of 600 to 1,200 pounds. To adjust it for lighter or heavier loads you can change the number of chain links the spring bars hang from (the fewer the links the more tension on the bars) and the angle of the head. Or you could just take the bars off completely if the trailer tongue weight is below 600 pounds. This is an...
view full answer... - Could Draw Tite Ball Mount 4285 Give Clearance to Allow Tailgate to FallTo determine if the # 4285 is long enough to allow you the tailgate clearance you need you'll need to take a couple measurements. First you'll need to determine how much additional length would be needed to allow the tailgate to clear. Next you'll need to measure the distance between the hitch pin hole of the ball mount and the ball hole center and you'll add that to the previous dimension you took and you'll know what length ball mount you'd need. The # 4285 is 12 inches between hole centers...
view full answer... - Recommended Weight Distribution for Enclosed Car Trailer With 910 lbs of Tongue WeightGiven the 910 lb as-towed tongue weight figure you kindly provided, the Reese Steadi-Flex, part # RP66561 is exactly what you need. The system is designed for trailer tongue weights ranging from 700-1400 lbs, which places your trailer's tongue weight right about dead center in the effective range, which is exactly where you want it. Because it isn't a chain-suspended system, you can back the trailer with the bars in place, but if you're making a very sharp turn while backing where there's...
view full answer... - Weight Distribution Recommendation for 2017 Jayco 28RLSAccording to the research I did on your 2017 Jayco 28rls it's going to have a tongue weight right at 700 lbs. Since you also have to consider the weight of any cargo behind the rear axle as tongue weight the best option would be the Reese Strait Line part # RP66084 which has a tongue weight range of 600-1,200 lbs. This system also has the only sway control on the market designed to fight sway before it starts. For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
view full answer... - Do 5,000 lb Trailers All Use the Same Hitch Ball SizeThat's going to depend on the coupler of the trailer. I can't gaurantee you what size you will encounter so you will need to check with the owner of the trailer currently and ask what it takes. For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286. Most likely it's a 2-5/16 though.
view full answer... - Reese Strait-Line Trunnion Bar Weight Distribution System for a 2012 Ram 2500 and XLR 27HFSThe Reese Strait-Line systems including # RP66084 are among the best that you can get for weight distribution and sway control and I recommend them more often than not. This particular model is rated for 600 to 1,200 pounds tongue weight. So if the total tongue weight when loaded and ready to tow is within that range then you are good to go with this system after adding ball # 19286. The included shank has a max rise of 6-1/2 inches and max drop of 1-1/4 inches. Other shanks are available...
view full answer... - Weight Distribution for a 6,500 Pound Terry Travel TrailerTrailer tongue weight is usually 10 to 15 percent of the gross trailer weight. So for a trailer that weighs 6,500 pounds that would be 650 to 975 pounds. But when calculating tongue weight for weight distribution you also have to add in the weight of anything carried behind the rear axle of the tow vehicle. If the tongue weight ends up being between 650 and 975 pounds then I recommend a system that is rated for 600 to 1,200 pounds such as # RP66084. This system also comes with dual-cam...
view full answer... - Weight Distribution System Recommendation for a Riverside RV Model 195The weight distribution system I would recommend for your Riverside RV Model 195 that most likely is going to have a tongue weight around 580-700 lbs is the Strait Line part # RP66083 which has a tongue weight range of 400-800 lbs and features the only sway control on the market designed to fight sway before it starts. For a 2-5/16 inch ball you would want the # 19286.
view full answer... - Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW1006 Recommendation for 2007 RamThe Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW1006 would work well for your as long as your loaded tongue weight (including the weight of any cargo behind rear axle of truck) is near 1,000 lbs but not over it. The amount of rise/drop your setup calls for would fall well within the range of what the shank that comes with this kit is capable of. For a hitch ball you would want the part # 19286.
view full answer...
Do you have a question about this Trailer Hitch Ball?
Info for this part was:
Installed by:
Andrew K
Installed by:
Brandon M
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Video Edited:
Jonathan Y
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Brian T
Video by:
Dustin K
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-636-242-8853
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.