bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 2000 lbs
  4. 72 Inch Long
  5. 58 Inch
  6. 4 on 4
Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs

Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs

Our Price: $240.29
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 35 lbs
Quantity: 
20440I-ST-72 - No Drop or Lift Dexter Leaf Spring Suspension
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Round trailer axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 10" to 13" wheels. Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs part number 20440I-ST-72 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (293)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Trailer Axles

  • 2000 lbs
  • 72 Inch Long
  • 58 Inch
  • 4 on 4
  • Leaf Spring Suspension
  • Idler Hubs
  • Dexter
  • No Drop or Lift
  • Standard Spindles

Round trailer axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 10" to 13" wheels.


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight spindle - no drop
    • Standard grease application
  • Spring seats and spindles are welded on
  • Cast iron idler hubs are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Limited 2-year warranty


Specs:

  • Weight capacity: 2,000 lbs
  • Hub-face-to-hub-face length: 72"
  • Spring-center-to-spring-center length: 58"
  • Hub bolt pattern: 4 on 4"
  • Tubing outer diameter: 1-3/4"
  • Spindle size: 1-1/16"
  • Wheel stud diameter: 1/2"
  • Wheel size: 10" - 13"
  • Grease cap outer diameter: 1.986"


Bearing, Race, and Seal Information

  • Bearings
    • Inner bearing: L44649
    • Outer bearing: L44649
  • Races
    • Inner race: L44610
    • Outer race: L44610
  • Seal: 10-9
    • Inner diameter: 1.50"
    • Outer diameter: 1.987"


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexters

Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


T20BTR-7258 Dexter Replacement Axle Beam - 72" Hub Face - 58" Spring Center - 2,000 lbs

8-91-05UC1 Trailer Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649

457458 Loctite Viper Lube High Performace Synthetic Lubricant - 14.1 oz Can

Item # 20440I-ST-72






Customer Reviews

Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs - 20440I-ST-72

Average Customer Rating:  4.8 out of 5 stars   (293 Customer Reviews)

Round trailer axle measures 72" from hub face to hub face and 58" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 10" to 13" wheels.

by:

OK. Finally finished my trailer mod today and installed this axle, idler hubs and springs. Noah was very helpful in sending me a missing wheel bearing from one of the idler hub kits. I am very pleased with the products I received. The only negative comment I have is I wish there had been written detailed instructions with each of the components. In particular the axle is the ez-lube type which I was not familiar with. Especially the item that is used instead of a cotter key on the axle nuts. I could not find any information on this but I'm pretty sure I figured out how to install this locks. I guess I could have called back again and asked for help but I amused to being able to figure things out for myself.




by:

Looks great on unfinished trailer.
Can't
wait to finish up.




by:

This axle is exactly what I needed for my trailer. It was shipped and delivered fast. All of the hardware was included as described. It is a very good quality axle. Customer service was very helpful and friendly.




by:

The product I received was exactly as described on the website. I was very pleased with prompt shipping. The quality of the axle, hubs and bearings seem to be very good. Perfect for an old homemade trailer.




by:

All the parts I ordered fit and worked great. Got my trailer back on the road in no time!




by:

very pleased with the axle kit i ordered. fit perfect and wasn't missing anything. thank you.




by:

Well made, less than 48 hour delivery!




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


After years of hauling firewood my Harbor Freight Trailer Axle fatigued and cracked. The Dexter Axle from etrailer got me back on the trail. Welded leaf spring seats on the opposite side of the axle at a spacing of 46.5 inches. The wheels stick out an additional 3/4 inch per side. The trailer now rides like a Cadillac. Very excited about putting my faithful trailer back in service, with a serious axle underneath that I have confidence in. The folks at etrailer very helpful and responsive. Thanks


Comments
Wonderific! Hauled camping gear up to Lake Tahoe 600 miles round trip, including my 5000 watt generator. Even had a big bear jump in the back to inspect that load when I arrived. The dexter turned the trailer into a very reliable and road worthy hauler. Since installing, made many trips up in Sierra to haul firewood and its been flawless!
Carl Z - 09/03/2021


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Parts fit as advertised, very satisfied with purchase. I new nothing about replacing a trailer axle info on web site and support provided were excellent.
Definitely would recommend etrailer




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Prompt delivery. Shipment was well protected from in transit damage.The axle fit my trailer perfectly and the u-bolts I ordered with the axle fit as they were supposed to. My wheels were old with a slightly larger bolt circle than the new hubs. Before I abrasive saw cut the old u-bolts, I tried the new hubs with the old wheels and they did not match up. I had to get new tire and wheels with the 4.5 bolt circle mounting holes. Not a big deal as I needed to replace the ties anyway. But testing the old wheels with the new hubs before cutting the the old u-bolts meant I didn't have downtime on the trailer while waiting for the new wheels and tires. The whole changeover, removing the old axle, installing the new axle, and mounting the tires took me about 3 hours at a leisurely pace.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I purchased a number of products from etrailer and I am very pleased with them all. The shipper lost my axle. When I contacted etrailer customer service, they handled my problem quickly and I had a replacement axle in a couple days. Well done!

The products were all of high quality and the assemble was much easier as a result. I have attached a few pictures of the build for those interested.

Thanks etrailer for your great products and service!!


Comments
I love these springs. The trailer is well supported and rides perfectly on the road. The trailer has performed better than my expectations. The products I purchased are all performing perfectly. When I build my next trailer, I will get all my assemble products from etrailer.com
Jim D - 01/02/2021


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I ordered my axle kit and received it 30 days later, I expected it in a week. The hubs, U-bolt kit, springs and grease were shipping in a box, when I receive it the heavy parts had smashed the grease tube, and was quite the mess in the box. The U-bolt kit I ordered as suggested by etrailer was the wrong kit and the bolts were short (their system did not suggest the right kit for the thicker springs). I see there is a kit I could have ordered with longer bolts. When I went to tighten the lug bolts on the new hub I received, one bolt started to pull through the hub. I reported the grease problem to etrailer, they could not care less, so I thought it would not be worth my time to report the other issues. I guess I will purchase new u-bolts, grease, and perhaps a hub somewhere else.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Product seems to be built well. I was missing a set of outer bearings that I had to get from a local tractor supply due to time constraints. They were missing when shipped to me. I have been happy so far with this product as I have pulled my home built teaardrop on it. I have traveled over 3k miles with it as well as a tire set I purchased from etrailer.
Contender ST205/75R15 Radial Tire w 15"
Good sturdy wheels and tires and they look good in person.


Comments
These products have been working out awesome so far after a year. I have taken a lot of trips and ordered other items. I am a happy customer and recommend this site to people I show my tear to.
Steve - 06/02/2021


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Missing parts. I've been in contact with customer service all week, I still don't have the missing parts.


Comments
Thanks for reaching back out. I will reach out to our customer service team and make sure you are up to date on your order.
-- Etrailer Expert Brooke M - 10/07/2022


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Axle is two inches longer than the original axle on a 1986 trailer but the tires still ended up neatly tucked under the fenders. It was shipped lightning fast, was easy enough to install and has worked flawlessly for just over 10,000 miles now. Excellent!




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I recently purchased a 1997 Pacific boat trailer, 2,000 lb capacity. Installed new lights, spare tire carrier, and tongue jack two months ago. Decided I may as well replace the wheel bearings and seals only to discover the spindles had deep gouges from the seals or material between the seal and spindle shaft. The right side (as viewed from the rear) even had a deep gouge in the seal area from who knows what. Surprisingly, the wheel bearings were fine.

My initial intention was to use what is called a "speed sleeve" to repair the seal contact area on the spindle, in addition to replacing the wheel bearings. The bearings were an odd size, thus somewhat expensive. Cheaper to replace the hubs but with the "speed sleeves", would come out to nearly $200, notwithstanding my labor.

To the rescue, etrailer! I measured my existing axle per the directions from the staff and ordered a replacement axle with hubs and a U-bolt kit for nearly the same price. Shipping was surprisingly fast given current events and a brand new axle and associated parts were delivered last night (8 April, 2020).

I've replaced wheel bearings before but have never replaced a trailer axle, so I was initially somewhat intimidated by the job. I jacked the trailer up to remove the wheels and used jack stands to ensure it would remain that way while I proceeded to remove the old axle.

The u-bolts (not quite a U given the square axle) were not too bad to remove. I used copious amounts of WD-40 on the threads and an adjustable wrench did the rest of the work. I was going to use an air ratchet but did not have enough clearance and did not wish to risk raising the trailer any further.

The old axle came out fine and was a bit heavy, around 50 lbs by my reckoning. Given the service life of 23 years, I'd say it did a good job (it was the original axle). Interestingly, the new axle weighed a good 10 - 15 lbs lighter...

The new axle went in fine, although due to the camber, which the original axle did not have, it took a bit of "squeezing" to get the holes on the spring seats. Nothing terrible, and my initial measurements were correct.

I did not take photos of the bearing and seal installation process as my hands had a fair amount of grease on them but if you follow the instructions, it is relatively simple. Make sure you "cup" the outer bearing area with grease in your palm to force it between the rollers. You will know when you have enough as it will be pushed between the rollers on the other side. Take a look at some [online] videos if you have never seen it done before. I believe there is a video on the etrailer website.

I used a short piece of 2x4 to install the seals and they went in without fanfare. I would recommend wiping a thin film of grease on the seal seating area of the hub prior to seal installation.

Installing the hubs was relatively straight forward, I seated the bearings while rotating the hubs to the recommended 50 ft/lbs. Then backed off WITHOUT rotating the hub, finger tightening, and installing the locking clips, which I have never seen before as I typically use cotter pins.

I installed the wheels and will be installing my "Bearing Buddies" later this afternoon.

All told, the job took me approximately 2 1/2 hours, maybe 3. I took my time and did my best to ensure it was a safe evolution given that the trailer had to be raised enough to allow axle replacement.

I will re-torque the u-bolts after some use and will probably re-seat the bearings as well. The price on the new bearings and seals is a significant improvement over what had come standard with the trailer.

Tools used were a 3/4" socket and 3/8" drive ratchet, 10" adjustable wrench, 1 1/2" socket and 1/2" drive torque wrench, 1/2" socket for the new u-bolts, a soft faced hammer to remove the "Bearing Buddies", (2) jack stands, and standard floor jack. Paper towels were most helpful during the bearing greasing and installation process...

If you have never done this before, like me, I can assure you it was relatively straight forward and I'm sitting here somewhat proud of myself...

Kudo's to the staff at etrailer!




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I would be happier if this axle had come with the hubs assembled. I am still struggling with getting that done.


Comments
Here is a video link to help you with installation.
-- Etrailer Expert Andrew N - 10/13/2022


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


I bought a axle, springs wheels, hubs etc. to build a utility trailer, I inadvertently had ordered incompatible hubs for the selected axle the person filling the order noticed this and contacted customer service to alert them of the issue who then called me to correct the problem. This saved me the time and expense of returning the part and delaying the project. great service, attentive, knowledgeable employees and great products.
Thanks E trailer.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Super fast shipping! Everything arrived in one piece, I was a bit worried because the box was ripped on one side. Everything I ordered is of the highest quality and you certainly get what you pay for. If I need trailer parts, I'm shopping here!!




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Quick delivery with tracking link! Great product and price!! Easy process to install axle and hubs. I would have appreciated a torque specification for the U-Bolts and Lug nuts in the video. I didn't take the time to search other locations or Q&A.

Tip: 1-1/2 " PVC makes a great tool to seat the grease seals. I used my 28MM socket, it was very close to size. I decided to use 2" Schedule 40 PVC pipe to install the E-Z Lube dust seal. I have many tools however no wooden hammers.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Great axle. Very pleased with it. I was shipped the wrong axle butt etrailer sent the correct one and I was able to ship the wrong one back later. Got me on the road a little quicker.
Other than that mishap,Ian pleased with the axle and would consider buying from etrailer in the future.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Really good solid axle... I needed the mounting tabs moved and had a metal fabricator do the work for $20.00. This was used on an old boat trailer that I turned into a utility trailer. Also swapped out the springs with ones purchased from etrailer too. To complete the package I ordered (3) 165/65-8 trailer tires. The trailer tows straight and hauls everything I've ever needed to.


Comments
This axle and springs are perfect for what I was looking to accomplish. Trailer tows straight and true and has saved me with large items on several occasions. I no longer have to drive 45 minutes to borrow a truck to haul stuff...
Honest E - 05/02/2017


by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Even though I have not yet had a chance to put all the parts together, they all appear to be well made. Shipping was fast. My only recommendation would be to not just “throw” some of the small parts (e.g. spring seats) loosely in the shipping box. I only received one of two spring seats, however, when I informed customer service of the discrepancy I received it shortly thereafter.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Maria K. went above and beyond to get me my trailer parts. Shipping was fast and I am extremely impressed with the service I received. Thank you.




by:

Review from a similar EZ Lube Axle w Idler Hubs in Trailer Axles


Worked out great, fit perfect, hubs went together smoothly, I would recommend you guys to anyone who needs trailer repairs! Thank you



25
293
Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Determining Which Replacement Axle Fits 2000ish Trailstar Trailer
    I would be happy to help you determine the correct replacement axle for your 2000 Bass Tracker Pro Team 175 and Trailstar trailer but the axle length is actually measured hub face to hub face so you will want to put your hubs back on temporarily and measure from there. In addition you will need to measure from spring center to spring center, and determine the axle rating of your axle. If the axle tag is still on the center of the axle it will have your axle rating on it, or if not you...
    view full answer...
    Image 1 for Image 2 for
  • Availability of Complete 72-Inch Axle Kit with Electric Brakes and 4-on-4 Hubs
    We do offer some complete axle/hub/brake kits such as # 35545E-ST-89 from Dexter, but we do not have a complete kit with the exact combination of features you require. We do offer 72-inch axles with 58-inch spring seats and idler hubs in your 4-on-4 bolt pattern. Part # 20440I-EZ-72 is rated at 2000-lbs and features EZ-Lube spindles. Part # 20440I-ST-72 is also rated at 2000-lbs and has standard spindles. Both kits will work with 12-inch wheels and both come complete with bearings, races...
    view full answer...
  • Spindle Washers for Dexter Trailer Axle with Idler Hubs
    Yes, spindle washers are to be used except in a rare occasion where they will not fit. However, the Dexter Trailer Axle with Idler Hubs # 20440I-ST-72 does not come with washer. You will need part # SW1000.
    view full answer...
  • Can Leaf Springs be Mounted Below Trailer Axle # 20440I-ST-72
    All you have to do to mount the leaf springs to the bottom of trailer axle # 20440I-ST-72 is to weld on new spring seats to the bottom of the axle. This axle has a 1-3/4 inch outer diameter so you would need 2 of spring seat # TRSS175. Welding should be done by a professional welder. Trailer suspension needs about 3 inches of space to travel so if there is not enough space then you would also have to use taller hangers. Dexter does not recommend using the over/under conversion kits with...
    view full answer...
    Image 1 for
  • Recommendation For Replacement 2000-Lb Trailer Axle
    The best way to find an axle that will match your trailer is to measure the spring-center-to-spring-center distance and the hub-face-to-hub-face distance of the axle you have on your trailer currently. I have attached a drawing that shows where these dimensions are taken. It may be easier to replace the axle with an axle that has the hubs already included. If you find you need a 72-inch axle and your wheels have a 5 on 4-1/2 inch bolt pattern I recommend part # 20545I-ST-72-15. This comes...
    view full answer...
    Image 1 for Image 2 for
  • Replacement 2K Idler Axle for Carry-On Trailer Model 5x10GW2K
    Carry-On steel-mesh trailer model 5x10GW2K uses a 2000-lb-rated idler axle. We have several 72-inch 2K-rated idler axle kits that come complete with hubs, bearings, races, seals, etc. We do not offer 2K axles without hubs. All of these use a leaf spring center spacing of 58-inches. You can see all kits by clicking on the link provided. We have both 4-on-4 and 5-on-4-1/2-inch bolt pattern kits, so just click on your wheel bolt pattern to see suitable options. Since your trailer uses 12-inch...
    view full answer...
  • Recommended Replacement Axles and Leaf Springs for Boat Trailer with Dual 2,000 lb Axles
    If your axles are 60 inches from hub face to hub face and 48 inches from center of spring to spring, then I recommend the Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 60" Long - 2,000 lbs # 20545I-ST-60-10 or the 4 bolt hub version # 20440I-ST-60. If you have longer axles with the hub face to hub face measuring 72 inches with spring centers at 58 inches, then you will want # 20440I-ST-72 for 4 bolt hubs. With any of these axles, I recommend the hardware # CE23000. I've...
    view full answer...
  • How To Find The Right Axle/Axle Options For Pop-Up Campers
    There are some measurements that you need to take to find out what kind of axle will work with your 1966 Apache Eagle Camp trailer. First measure from one hub face to the other. This is your hub face measurement. The hub face is where the wheel and the hub meet when bolted down. Then measure from the center of one spring hanger to the next. Try to find the axle capacity, usually it is somewhere on the axle but since it is so old, it may be worn off by now. If that is the case get an idea...
    view full answer...
    Image 1 for
  • Are Washers Always Needed Between Spindle Nut and Outer Bearing
    Spindle washers aren't always used. We actually sell complete axles with hubs like the # 20440I-ST-72 which does not come with washers. Typically if a washer is needed it will be on a higher capacity hub/axle.
    view full answer...
    Image 1 for
  • Recommended Trailer Axle Kit for Fabricating Off-Road Utility Trailer
    If you are building your own firewood hauling trailer you might want to consider one of our Timbren axle-less suspension kits. These are available with idler hubs and some also have lifted spindles that can give you better ground clearance (for use in the woods when gathering your firewood). We do have standard beam axle kits too but the Timbrens can be the ideal way to go for fabricators that want an effective but simple installation of their trailer suspension. The linked page will display...
    view full answer...
  • Recommended 10 Inch Wheels For Custom Trailer Application
    If you are using axles like the Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern - 72" Long - 2,000 lbs # 20440I-ST-72, you can use 10 inch wheels like the Kenda 205/65-10 Bias Trailer Tire with 10" White Wheel - 4 on 4 - Load Range E # AM3H460. When building a trailer you want to make sure that you have the capacity you need for your load compatible with the lowest/weakest component in your system. For 10 inch wheels you are looking at 2000 lb axles, so you may want a tandem...
    view full answer...
  • Replacement 4 on 4.5 Bolt Pattern Trailer Rim and Radial Tire
    The tire size ST175/80R13 is pretty standard, so we can definitely get you replacements for the tires. I suggest going with the Taskmaster Contender ST175/80R13 Radial Tire # C17513C. These are rated up to 1,360 pounds at 50 psi and also has an M speed rating, which means it is rated up to 81 miles per hour. On the other hand, the wheels are proving to be more difficult. The 4 on 4.5 bolt pattern was used on older vehicles and wasn't really ever used for trailers. At least that I could...
    view full answer...

Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Installed by:
Jeff D
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.