bing tracking image
  1. Trailer Brakes
  2. Dexter
  3. Electric Drum Brakes
  4. 6000 lbs Axle
  5. 12 x 2 Inch Drum
  6. 14-1/2 Inch Wheel
  7. 15 Inch Wheel
  8. 16 Inch Wheel
Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs

Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs

Item # 23-105-106
Our Price: $231.41
Trailer Brakes
Shipping Weight: 30 lbs
Add to cart
In Stock
Dexter Electric Drum Brakes - 23-105-106
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Whether you're replacing your trailer brakes or putting some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14-1/2" to 16" wheels. 5-Bolt pattern backing plate. Made in the USA. Great Prices for the best trailer brakes from Dexter. Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs part number 23-105-106 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (233)
  • Q & A (0)
  • Photos

Dexter Trailer Brakes - 23-105-106

  • Electric Drum Brakes
  • 6000 lbs Axle
  • 12 x 2 Inch Drum
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 16 Inch Wheel
  • Standard Grade
  • Manual Adjust
  • Dexter

Whether you're replacing your trailer brakes or putting some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14-1/2" to 16" wheels. 5-Bolt pattern backing plate. Made in the USA.


Features:

  • Easier to install and gives you more control than hydraulic brakes
    • Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines needed
  • Periodic manual adjustment required
    • Can be done in minutes
  • Long-lasting brake pads offer excellent braking torque
    • Fully bonded to shoes for more consistent braking compared to riveted pads
  • Adjuster plugs (included) protect internal components from dirt, grime, and road debris
  • Left-hand (driver's-side) and right-hand (passenger's-side) brake assemblies included
    • Includes mounting nuts (bolts sold separately)
  • Made in the USA


Specs:

  • Application: most standard hub-and-drum assemblies, including etrailer, Dexter, and Lippert (LCI)
  • Dimensions: 12" diameter x 2" wide
  • Mounting flange bolt pattern: 5 bolt
  • Wheel size: 14-1/2", 15" or 16"
  • Axle rating: 6,000 lbs
  • Limited 5-year warranty


Quick Tip: There's really not a whole lot to getting new drum brakes. If you've confirmed that all of the specs listed above line up with what you need for your trailer, you can be pretty sure these will work for you.


How to Manually Adjust Trailer Brakes

The more miles you put on your trailer, the more your brake pads will wear down. As they lose contact with the drum, stopping distances get longer and longer. To keep your brakes working great, it's important to adjust them pretty routinely. For this job, grab a floor jack and either a brake adjustment tool (sold separately) or just a standard flathead screwdriver.


Jack up your trailer enough to get the wheel(s) off the ground. Remove the adjuster plugs from the backing plate on the brake, and insert the flat end of the tool through the back of the assembly.


Screenshot from an instruction video shows how to manually adjust the the alignment on a drum brake

Push in on the star gear and lift it up. Keep doing this until the brake pads catch on your drum. When you can't spin your wheel by hand anymore, back the gear off by about 10 clicks by pushing down on the star gear. Does the wheel now spin freely (even if it sounds like the brake pads drag slightly on the drum)? Great! Then you're all done with that one and ready to adjust the rest.


How to Break In New Brakes

After you get these brakes installed and adjusted, you'll need to break them in. First, find a long stretch of road or a big, empty parking lot. Once you're there, set your brake controller to its maximum setting and get moving. Speed up to about 40 mph and brake to slow to about 20 mph. Repeat this 15-30 times. The goal is to get the brake shoes and magnet properly seated into your drum. You'll know you've done that when it feels less jerky (and more consistent) each time you apply the brakes.


Note: The brakes will be very hot after doing this, so after every 10 stops you'll want to wait about 10 minutes to let the brakes cool off before continuing. If you don't, you might cook and crack the pad material.



23-105 Dexter Electric Brake Assembly - LH - Driver Side - 12" x 2" - Manual Adjust - 6,000 lbs

23-106 Dexter Electric Brake Assembly - RH - Passenger Side - 12" x 2" - Manual Adjust - 6,000 lbs





Customer Satisfaction Score:


Customer Reviews

Dexter Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 6,000 lbs - 23-105-106

Average Customer Rating:  4.8 out of 5 stars   (233 Customer Reviews)

Whether you're replacing your trailer brakes or putting some on a new brake axle, these are easy to work with from start to stop. 12" x 2" Assemblies fit 14-1/2" to 16" wheels. 5-Bolt pattern backing plate. Made in the USA.

by:

If your trailer brakes are like mine were this is the item for you. I purchased a used excavator and it came with a trailer, well the trailer was thrown into the deal for a reason. All the brakes for both axels had multiple problems, cracked shoes, bad magnets, various rusted parts. After totaling the cost of all the individual items I would need, the cost of a brand new brake kit was only a little more and much more easy to replace, five mounting bolts off five on. I do recommend one thing, in the instructions your given the torque setting for the bolts, so Dexter must feel it's important, so use a torque wrench, rent one if you don't own one.



by:

I managed to get them on, using new wires from vehicle to brakes and marine grade glued crimp-on connectors near the end of last season. Kept the boat and trailer covered and up against the wall of the house for the winter. But mid summer I hooked up the truck and the brakes did not work. The emergency battery does not charge either when plug is connected. After spending all last summer working on the trailer, I spent this summer working on the boat, and just am not willing to get into why the brakes don't work. Ford F-150 does not match color codes. There should be more information about how to identify proper wires from truck to trailer wires, or what should be hot when. I never found a lead that was always hot, whether the key was in or out or on or off or engine running. But last season, everything worked for state inspection. All I know is it was a real science project last year, one I don't wish to repeat. Maybe it is a fuse on the truck. I don't care this year.



by:

Installation was relatively simple. Cut the existing electric brake wires and remove the backing plate with shoes assembly. Follow by installing the new brake assembly and connect the electrical wires. We use this trailer often through the spring, summer, and fall to transport our race car, and the brakes have performed flawlessly!



by:

I received 3 boxes all of which had some sort of damaged or destroyed parts in it. All of the bearing kits are garbage, I will need replacements. The back plate and pad assemblies were ok, only two I had to installed the adjuster bolt back into and inspect for damage, but only received 2 of 4 nut and plug kits seen in pictures attached. Everything was improperly boxed, boxes are way too large for these components and hardware/bearing kits were packaged with very heavy components. Bearing kits should have been shipped separately in a small package. Bearing kit was also not in a proper bag, if not a ziploc at least tape the bag shut. I hope the drums are ok, I will have to grind on 2 of them just to allow the wheel to mate properly. I will have to measure all of the races and drum dimensions to ensure they are not warped or bent in any way. Extremely unhappy with this purchase. What a waste of components.

Etrailer Expert

Jenny N.

11/19/2021

I will have our customer service team reach out to you.



by:

Fantastic service. Fast well packaged s hipping

Mike

1/24/2024

After a year of using the brakes everything is working well and as expected



by:

These are the real deal. Original Dexter components. Great quality and fitment. Came with new locknuts for assembly. Easy, do it yourself replacement. My wires were long enough to connect before I placed these on the axle which made it a much easier job than trying to connect the wires with the backing plates installed. These were installed on a Cronkhite 2000 series 12300lb equipment trailer with Dexter 6000lb axles. Exact replacement. Great packaging and very quick delivery from eTrailer.



by:

Worked exactly as described, came with all new hardware. Quality A+



by:

Easy install, good instructions...1 year later and having no problems.



by:

Great price on the set of these OEM replacements. I was skeptical that I would be receiving left and right in the set for the posted price. Local trailer parts store was selling a single left or right non-dexter for almost as much.

David

5/21/2023

1 year update, I should have done this sooner. The whole rig stops better as expected, clearly safer. I run the trailer daily with it loaded, and I’m very happy with the reduced wear on my truck’s brakes.



by:

Fit perfect work outstanding! I bought these assemblies because they are Made in the USA. Only way to go.



by:

Got exactly what i ordered in timely fashion makes for quick replacment if the braking system on my trailer.



by:

Parts arrived quickly and were packaged well, came with the nuts to secure the brake plate to the axle. Brakes work as they should, well worth the money.

Casey

3/28/2023

A year later the trailer still stops great, probably put 8000 miles or better on it. It also runs during the winter in upstate NY, salt is hard on things here. Definitely satisfied with my purchase.



by:

These brake assemblies were an easy replacement for the original brakes on our 1973 Airstream Argosy travel trailer.



by:

I have not installed the brakes yet. They came well packed with great instructions. The video on etrailer on how to remove the old and replace with new should make the job easy.



by:

Joshua B was very helpful figuring out which hub seal I needed. Both the seals and brake assemblies are good quality and fit correctly. You get what you pay for as the old saying goes.



by:

Every thing was great price fit speedy delivery and a great customer service rep who helped me get the right parts the first time. Gwen is my go to person for the right parts. R trailer is great



by:

Wow that was great. 1962 tandem axle was missing shoes and magnets so I ordered the 5 bolt pattern. Perfect fit connected wires, test drove it, perfect!



by:

parts and pricing was fair, had shipping issue on first part of order, (in photo), called to let them know, was no issue and items lost were replaced in a timely manner, will buy from etrailer again, no problem



by:

Package was delivered in record time. Everything fit, no issues with missing parts. Was complete with a simple installation. Took approximately 1 1/2 per wheel including repacking of wheel bearings.



by:

Quality parts and seals. Good packaging for shipment. Order arrived in four days. Dry satisfied with etrailer.



by:

Customer service was great! Because my parts were back ordered, etrailer thought they could substitute my needed parts. When I was able to look at the parts after ordering, I was able to see that they would not work for my application. Not even ten minutes had passed when I called back to request my original backing plates. To my astonishment, Chelsea told me my order was already boxed and on the truck and it could not be pulled. After telling her the situation, she understood what happened and corrected it! It unfortunately did take a while to get my parts but no fault of hers. Will be using etrailer when ever possible.



by:

These brakes work very well on my 13000Lb logging trailer.



by:

These brakes are legendary. We use them on all of the VORSHEER XOC Trailers

Vorsheer

1/25/2023

Made in the USA! Best brakes in the market today!



by:

Assemblies fit perfectly. Very simple and clean assembly.



by:

Super fast shipping as always and always on point!


25
233
Show More Reviews

See what our Experts say about this Dexter Trailer Brakes

  • Comparing Dexter 6,000 Lb Trailer Brakes, 23-105-106 and 23-105-106-09
    The only difference between the Dexter Electric Trailer Brake Kit part # 23-105-106 and Dexter Electric Trailer Brake Kit part # 23-105-106-09 is fit. The former works on Dexter or Lippert axles with a five bolt bracket mounting flange whereas the latter works on Dexter or Lippert axles with a five bolt bracket mounting flange as well as AL-KO/Hayes axles with a four bolt bracket mounting flange. If you have a Dexter or Lippert axle with a five bolt bracket mounting flange you can use either...
    view full answer...
  • Replacement Brake Assemblies for 12 inch by 2 inch AL KO 5,200 lb Trailer Axle
    We do have the Dexter Electric Brake Kit part # 23-105-106-09 which is 2, 12 inch brake assemblies that can be mounted with a 4 or 5 inch bolt pattern. The 4 bolt pattern that is found on AL KO trailer axles like what you have now so it would be correct fit and would work great on a 5,200 lb axle.
    view full answer...
  • Bolt Pattern for Dexter Axle 12" Electric Brake Assembly Kit
    Attached is a photo showing the dimensions of the bolt holes for the Dexter Electric Trailer Brake Kit # 23-105-106. The bottom holes are separated by 3" on center while the other bolt holes are separated by 2-1/8" on center. I have also attached review and installation videos for you to reference.
    view full answer...
    Image 1 for
  • Troubleshooting Trailer Brakes that Don't Release Until Wheel is Rolled Backwards
    Sounds like a mechanical issue with the brake assemblies. You'd want to take the wheel and hub off and inspect the assemblies and drums for anything that looks broken or out of place and replace as needed. The part # 23-105-106 would be correct replacement brake assemblies if you have 12 inch diameter drums and a 6k rated axle. If you have something different let me know and I'll help you pick out the correct parts.
    view full answer...
  • Troubleshooting Weak Electric Trailer Brakes
    For your electric brake assemblies, the first thing to note is that your ground on your brake magnets should be directly to the trailer frame. Each assembly should have the power from the wiring connection direct as well as the other wire of the magnet attached to the frame bare metal to metal with no corrosion or debris. The voltage you are getting on your 5 o'clock trailer pin looks good. When you hit the manual override, you should get even more of a boost. The emergency brake...
    view full answer...
  • Are Trailer Brakes Supposed to Activate all At Same Time
    When trailer brakes are wired up properly they all activate at the exact time so that you have maximum braking power and efficiency. If they all came on at different times that would not be ideal at all. I attached a diagram that shows how tandem brake axles are normally wired up.
    view full answer...
    Image 1 for
  • Troubleshooting Front Brakes Locking Up On A Tandem Axle Trailer
    Having already done adjustments and replaced multiple parts, you've really ruled out potential mechanical causes here. A next step would be to look at the electrical side of things. Specifically I would look at connection points in the wiring on the trailer to make sure all of the connections are correct and redo them. A short in the wiring to the back axle brakes could be the cause. During your thorough inspection of the wiring, look for any pinched, frayed, or damaged wires would...
    view full answer...
  • Can Brakes be Added to Military Command Trailer
    Fitting electric brakes on your trailer all comes down to the spindles that are on the axles. If they are standard trailer spindles with brake mounting flanges then adding electric brakes is really pretty easy. If you check out the link I attached you'll find an FAQ article on adding brakes to a trailer that will walk you through the entire process.
    view full answer...
  • What Brake Assemblies Will fit 14.6 Inch Wheels?
    There are a number of brake assemblies which are going to fit wheels that are between 14-1/2 inches and 16 inches. In order to choose the right assembly, you will need to know your axle's weight capacity and the bolt pattern of the mounting flanges. For example, the Dexter Electric Trailer Brake Kit # 23-105-106 are 12" x 2" assemblies that fit 6,000 lbs axles and mounting flanges with a 5-bolt pattern. I've added a link to each of our available assemblies that fit wheels in your size...
    view full answer...
  • How to Determine Which Replacement Brake Assemblies and Hub/Drums Are Needed
    I'll need to know the inner and outer wheel bearing reference numbers and wheel bolt pattern. With that information, I can recommend replacement bearings, seals, brake assemblies and hub/drums. You'll also want to carefully examine the spindle where the failure occurred to make sure it isn't damaged. If it is, you'll want to replace the spindle, if not the axle. Since you'll need welder experienced in working on trailer axles to weld the new spindle in place, many find it to be less of...
    view full answer...
    Image 1 for Image 2 for
  • Is There Specific Spacing Needed for New Brakes and the Hub/Drum Assembly
    You want to adjust your new brake assembly, like part # 23-105-106, so that when you spin your tire/wheel you feel a little bit of drag. If you don't have any drag then your trailer braking will be weak but if you have a lot of drag then your trailer brakes will lock up with minimal power to them from the brake controller. If you are talking about the distance between the brake magnet and the drum then there isn't a specific spacing for this either as the magnet won't do anything until...
    view full answer...
  • Available 12 x 2-Inch 6K-Rated Electric Trailer Brakes with 4-Bolt Mounting Pattern
    All of our 12 x 2-inch 6K-rated electric trailer brakes are shown on the linked page. Most of these use the 5-bolt mounting pattern but a few Dexter products include holes for BOTH bolt patterns, both 5-bolt and the 4-bolt Hayes/AL-KO pattern, parts # 23-105-09 (left) and # 23-106-09 (right). We also offer them as a set, part # 23-105-106-09.
    view full answer...
  • Replacement 12" X 2" 6,000LB Trailer Brakes For Coachmen Camper With 23-105-00 and 23-106-00 Brakes
    For your Coachmen Camper you are going to want the Dexter Electric Trailer Brake Kit # 23-105-106 for an exact replacement to both the left and right brake assemblies that you currently have. Our part number dropped the -00 at the end. The Dexter Electric Brake Kit # 23-105-106-09 have a special flange that is specific to the AL-KO/Hayes 4-bolt axle brake flanges. If you wish to upgrade your brakes the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459 will not require constant...
    view full answer...
    Image 1 for Image 2 for
  • Utility Trailer Built with 6000 Lb Dexter Axle
    I recommend the Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange, 12" - Left/Right Hand Assemblies for 6K, # 23-105-106-09. If you have a modified axle with parts that are welded on and do actually need to be removed that will require cutting. At that point I would consider the advantage of buying a new axle vs. removing and replacing multiple parts on an older modified axle. But first, please review the installation video of this product. I think this is what is needed for your...
    view full answer...
  • Availability Of 12" Replacement Brakes For Kelsey Hayes 4-Bolt Pattern With 3-1/2" Center Hole
    The Dexter Electric Brake Kit # 23-105-106-09 is currently the only 12" brake kit we carry which utilizes the 4 bolt flange for the Kelsey Hayes axles. It was created with the 5 bolt pattern as well so that it could be used for more than just the one axle application. This bolt pattern has a smaller radius which is why the center hole is not the same size as your current brakes. I have never seen this be an issue with an axle but if it is on your axle you can enlarge the center hole since...
    view full answer...
  • What Brakes Need To Be Used With the Dexter Hub/Drum Assembly (8-201)
    The Dexter Hub/Drum Assembly (8-201) will use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-458-459 or just the Dexter Electric Trailer Brake Kit part # 23-105-106.
    view full answer...
  • Should Brakes Be Replaced On Both Sides of Axle on 2021 Grand Design Transcend Xplor Travel Trailer
    It is not required to replace all of the brakes at once on your tandem axle trailer. However, you should replace the opposite side brake assembly on that same axle as you said. Assuming you need a 12" x 2" brake assembly like the # 23-105 you were looking at, you will need the # 23-105-106 for a left and right hand assembly. If you want self-adjusting brakes then you will need the # 23-458-459 instead.
    view full answer...
  • Replacement Brake Assemblies for 2005 Airstream Safari
    It looks like all models of the 2005 Airstream Safari used 12" x 2" brake assemblies regardless of the axle capacity. If you want standard brakes you can use the Dexter # 23-105-106. If you want the Nev-R-Adjust self-adjusting brakes then you need the # 23-458-459. I recommend going with the self-adjusting option so you don't have to worry about them once they're installed.
    view full answer...
  • Recommended Electric Brakes For My 1981 Flying L Stock Trailer with 4 Mounting Bolts
    When it comes to replacing your electric brakes on your 1981 Flying L Stock Trailer The Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange - 12 inch - Left/Right Hand Assemblies - 6K # 23-105-106-09 will work for you. This brake set has a 12 inch by 2 inch drum and it will fit a AL-KO/Hayes 4 bolt flange or a 5 bolt flange. These brakes will fit 14-1/2 inch, 15 inch, or 16 inch wheels. I attached a review link video below.
    view full answer...
  • Diameter of the Center Hole of the Trailer Brake Assemblies # 23-105-09 and # 23-106-09
    The center hole of the brake assemblies # 23-105-09 and # 23-106-09 measures 3-3/16 inches across. The kit for both of these is the part # 23-105-106-09 that you referenced.
    view full answer...
    Image 1 for
  • Brake Assembly Recommendation for 1985 Horse Trailer with 12 inch Brake Assemblies 4 Bolt
    Sounds like you have 12 inch AL KO axles and need the part # 23-105-106-09. If the upper bolts are slightly wider than the lower ones that is the correct kit you'd need.
    view full answer...
  • Recommended Replacement Brake Assemblies For Axle-12x2 Inch With 4-Bolt Mounting Flange
    I do not recommend drilling another hole on the back plate to make a 5-bolt flange out of your 4-bolt flange. This would not be safe and will weaken the overall integrity of the plate and axle. Also, the 4 holes of a 5 hole flange do not line up with the 4 holes of a 4 hole flange. Based on your information, it sound like you have an Al-Ko/Hayes axle. If this is the case then I recommend the Dexter Electric Brake Kit, Item # 23-105-106-09. This kit works with 12 x 2 inch brakes...
    view full answer...
  • Correct Braking Assemblies for 12" with 4-Bolt Pattern
    It sounds like you're looking for the Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange part # 23-105-106-09 which measures 12" x 2" and has a four bolt flange. I have attached the hole spacing below.
    view full answer...
    Image 1 for
  • Availability of Trailer Brake Assemblies that are 12 inch Diameter and have 4 Bolt Mounting Pattern
    We do have the Dexter Electric Brake Kit part # 23-105-106-09 which is 2, 12 inch brake assemblies that can be mounted with a 4 or 5 inch bolt pattern. The 4 bolt pattern that is found on AL KO trailer axles.
    view full answer...

Do you have a question about this Trailer Brake?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Jacob T
Video Edited:
Jacob T
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Alexander C
Written by:
Alexander C
Employee Ryan F
Written by:
Ryan F
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924