bing tracking image
  1. Trailer Brakes
  2. Dexter Axle
  3. Electric Drum Brakes
  4. 7000 lbs Axle
  5. 12 x 2 Inch Drum
  6. 14-1/2 Inch Wheel
  7. 15 Inch Wheel
  8. 16 Inch Wheel
Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs

Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs

Item # 23-180-181
lowest price pledge
Our Price: $204.71
Trailer Brakes
This item qualifies for Free Shipping
Shipping Weight: 30 lbs
Quantity: 
In Stock
23-180-181 - 14-1/2 Inch Wheel,15 Inch Wheel,16 Inch Wheel Dexter Axle Trailer Brakes
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
12" x 2" Driver's-side and passenger's-side electric trailer brake assemblies fit 7,000-lb axles. Mounting flanges have a 5-bolt pattern. Fit 14.5" to 16" wheels. Lowest Prices for the best trailer brakes from Dexter Axle. Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs part number 23-180-181 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (183)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Brakes - 23-180-181

  • Electric Drum Brakes
  • 7000 lbs Axle
  • 12 x 2 Inch Drum
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 16 Inch Wheel
  • Boat Trailer
  • Camper
  • Car Hauler
  • Snow Trailer
  • Utility Trailer
  • Manual Adjust
  • Dexter Axle

12" x 2" Driver's-side and passenger's-side electric trailer brake assemblies fit 7,000-lb axles. Mounting flanges have a 5-bolt pattern. Fit 14.5" to 16" wheels.


Features:

  • Electric brakes are easier to install and offer more user control than hydraulic brakes
    • Require only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
  • Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
  • Left-hand (driver's-side) brake assembly, right-hand (passenger's-side) brake assembly, and mounting nuts included
    • Mounting bolts sold separately
  • Made in the USA


Specs:

  • Dimensions: 12" diameter x 2" wide
  • Mounting flange bolt pattern: 5 bolt
  • Wheel size: 14-1/2", 15" or 16"
  • Axle rating: 7,000 lbs


23-180 12" Dexter Electric Brake Assembly, LH - 7,000 lbs

23-181 12" Dexter Electric Brake Assembly, RH - 7,000 lbs






Customer Reviews

Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs - 23-180-181

Average Customer Rating:  4.8 out of 5 stars   (183 Customer Reviews)

12" x 2" Driver's-side and passenger's-side electric trailer brake assemblies fit 7,000-lb axles. Mounting flanges have a 5-bolt pattern. Fit 14.5" to 16" wheels.

by:

Received my order.....2 Dexter electric brake sets. Evidently the 2 boxes, left and right, did not fit in the shipping box. So they took one out of the box, slid it beside the boxed set, no plastic bag, padding, etc. Then they left the hardware kit out of the side they unboxed.....no nuts, plugs, etc.....! Called Customer Service, they said they would put something together and send it to me. Haven't received a shipping notification as of yet. Good luck on my part! Will not order from etrailer again!


Comments
I would be frustrated as well! I am sending this to our customer service team to make sure they update you on that shipment. Thanks for letting us know.
-- Etrailer Expert Brooke M - 08/23/2022


by:

Thank you ETrailer, parts all installed today on My Grand Design Reflection Fifth Wheel, the whole buying process was great and a Paul helped me get the parts I needed on the phone. I would highly recommend this company for trailer parts,, Great people, Thanks Again look forward to future purchases; John Donovan




by:

Product exactly what I needed! Online catalog easy to navigate. Product shipped and received quickly. Will use etrailer.com every time for our toyhauler!




by:

These guys were great. We are from Ontario Canada and had some issues on our way to Florida. Great customer services. Some of our parts got shipped to the wrong location, but worked hard to figure out what went wrong and got our parts to us in time for us to return home. I would highly recommend e trailer for all your trailer needs.




by:

Great service, quick and parts in stock. A lot of our customers are rodeo cowboy/cowgirls and they need to be back on the road in a hurry. Waiting 2 weeks for parts don't work. Thanks eTrailer fo what you do~




by:

The products were excellent however, I ordered 2 each of #23-180 and 2 each #23-181. I received 3each #23-181 and 1ea #23-180. etrailer is sending me the correct one but it will take about a week to get in stock, then shipping time to me. I have already paid the service person for a service call of $xxx for the repairs, now I have to pay him another $xxx to come back when the correct one is received. I don’t understand how this could have happened except for someone not paying attention when getting my shipment ready. Needless to say I am very unhappy I have to pay the service person for two service calls due to someone not paying attention when getting the order ready for shipment.




by:

No visible phone number. On the web sight
No place to leave a note or ask questions when ordering
This kit DOES NOT COME WITH DRUMS !!!!!
I need to reuse the old bearings and seals for my time frame
Other wise they showed up on the delivery day and the assembly seamed complete
Hope things are good


Comments
Sorry about the trouble. Our customer service number is 800-298-1624. Here is where you can ask a question about the product:
-- Etrailer Expert Sierra K - 09/24/2021


by:

Installed on my new to me weekend warrior. Worked great! Thank you!!!




by:

Order was shipped with items missing. This caused us to have ro cancel our trip due to not being able to get the repairs done in time.


Comments
I am sorry to hear that. I will make sure to send your information to our customer service team to make sure you are squared away and not having to cancel any more trips.
-- Etrailer Expert Brooke M - 09/22/2022


by:

Perfect fit, quick processing and delivery from etrailer. I've shopped here before and I'll continue to shop here in the future.




by:

great price and product, ordered another set to complete the 4 wheel trailer job.




by:

Easy installation and great customer se rvice




by:

great fit, easy installation




by:

Took like forever to get my order but thats what we get for relying on China for everything... etrailer did what they could to keep me informed....




by:

Starlight all in one system and they cut down on repair time with everything being there in a new




by:

Fast service with the correct product I ordered. Each assembly was individually packaged in the factory carton and all 4 pieces were securely shipped in one box. Delivery came a day earlier than estimated.




by:

Excellent service. Excellent delivery timeline. Expert assistance. Everything was exactly what I needed and furthermore I can now adequately stop my trailer and mitigate running over the stray- animals that run out in front of me (<-- thats a joke!). I would highly recommend etrailer for all of your camper needs!




by:

I am truly amazed that there still companies like etrailer who's customer service has been consistently the best in getting orders out and delivered quickly.The new brake assembly will replace the old ones for our 2022 travel season.




by:

My parts arrived a day earlier than expected. Everything was exactly as ordered. I have used etrailer several times before and very impressed with their fast and friendly service. Always suggest them to friends looking for trailer parts.




by:

Easy to install, works great and very d ependable




by:

Everyone was so helpful when we were trying to find the parts and even afterwards trying to install them ourselves great company




by:

Order arrived on time and was well packaged. UPS left boxes on front door steps instead of under covered porch, so they got wet in rain, but thanks to excellent packaging by etrailer, no parts got wet. Very impressed with quality. Will order from etrailer again!




by:

One assembly was missing the adjuster and two look like they have already been installed. Other than that they are exactly what I wanted.




by:

Excellent service with the order
Fast
shipping ordered on Sunday night arrived Wednesday morning at my house
Own parts for dexter axel
Would recommend to anyone




by:

Perfect fit and easy to install!



25
183
Show More Reviews

See what our Experts say about this Dexter Axle Trailer Brakes



  • Troubleshooting Dexter 6,000 lb Axle Electric Drum Brake Adjustment
    What you describe for your brakes after adjustment is not normal. You should have a slight drag on your brakes when spinning the hubs by hand when they are adjusted properly. There shouldn't be any difference when rotated in the opposite direction, so having brakes engage makes me think there is a spring issue or a shoe alignment issue. There should not be any locking so that is a sure sign of an issue. If you put the assembly on the wrong side, that would give you stronger braking...
    view full answer...
  • Thickness of Brake Pads for 12" Dexter Electric Brake Kit and What is Minimum Safe Thickness
    The brake pads on the 12" Dexter Electric Drum Brake Kit # 23-180-181 are 3/16" thick. Dexter Axle recommends replacing them once they get down to 1/16" thick.
    view full answer...
  • How Many Brake Assemblies are in the Dexter Electric Trailer Brake Kit 23-180-181
    The Dexter Electric Trailer Brake Kit # 23-180-181 comes with a left hand and a right hand assembly. If you are needing 4 assemblies you will need to purchase 2 sets of this kit. You can check out the assemblies in the review video I linked for you.
    view full answer...
  • How To Determine Replacement Electric Trailer Brakes For Trailer
    I would be happy to recommend the correct replacement electric trailer brakes for you, but the 3175030707 did not cross reference to any brake assemblies. To determine the correct brake assemblies I would need to know the weight rating of your axle which can be found on the axle tag on the axle tube, and the diameter and width of your current assemblies as shown in the included picture. For example the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs...
    view full answer...
    Image 1 for
  • How Long to Do Install of New Trailer Left and Right Brake Assemblies
    I'd set aside about two hours or so to do a brake assembly install like with the Dexter Trailer Brake Kit part # 23-180-181 if it's your first time doing so. It's not a hard process but if you wanted to take your time with it I am sure two hours or so would be adequate.
    view full answer...
  • Will Dexter 7k Trailer Brake Assemblies Fit 5,200 lb Trailer Axles
    The 7k Dexter brake assembly set part # 23-180-181 will fit on your 5,200 lb axles and will have a bigger magnet. The problem you may find is that the bigger magnet might make it harder to get the brakes dialed in perfectly as they might come on too strong or too weak.
    view full answer...
  • At What Interval Should Electric Trailer Brake Assemblies Be Replaced
    There's really no set hard and fast rule on the interval of time at which trailer brake assemblies should be replaced, but once the friction material on the brake pads gets down to about 1/16 of an inch or the magnet gets grooved or worn to the point where the copper wire inside of it is visible, that's the point where you'll want to replace them. If the face of the magnet has grooves worn in it, take a good look at the armature surface of the brake drum where the magnets ride against....
    view full answer...
  • What is Bolt Pattern of Trailer Brake Assemblies 23-180-181
    I attached a picture that shows the bolt pattern of the trailer brake assembly part # 23-180-181 that you referenced.
    view full answer...
    Image 1 for
  • What Replacement Brakes do I Need for My Dexter 7k Axles?
    It sounds like you are looking for 2 sets of left/right side brakes for your 7k trailer. If that is the case, we unfortuantely do not carry the 23-181-00 because these are an older brake model that was discontinued from Dexter. However, the new models fit as well. Those are 2 sets of the # 23-180-181. These are direct replacements of your current brakes.
    view full answer...
  • Help! Trailer Brakes Are Only Hooked Up On One Side of Axle
    Yes, you should be concerned about your trailer brakes being connected on just one side, but before you reach out to a dealership let's double check first. Electric brakes, like the Dexter Axle # 23-180-181, use magnets so when the brakes are activated there is a slight "hum" noise. Sometimes wiring is ran along the axle from one side to the other so you may only see the brake circuit going down one side of your trailer but all of the brakes are still connected to the circuit. If you have...
    view full answer...
  • Difference Between the Two Types of 12x2 7000 lb. Brake Assemblies
    The difference between the two brake assemblies comes down to one being self adjusting and one that is manually adjusted. I recommend the self adjusting because you will never have to crawl under the trailer to adjust the brakes. This can be a headache and we tend to not do it as often as we should which leads to poor performing brakes. With the self adjusting it automatically tightens as the shoes wear down keeping your trailer's braking performance optimized and working as safely as...
    view full answer...
  • No Trailer Brakes on 2018 Voltage Toy Hauler After New Brake Install
    I really suggest you just take the trailer back to the dealer and have them fix the issue because the second you try to fix their mistake, the warranty for the work they performed goes out the window. That said, if the brakes are humming then that means you are getting power. If the brakes are getting power but not engaging then the most common cause of this after a fresh install is that they have not yet been adjusted. There is a star wheel on the back for adjusting the tension on the...
    view full answer...
  • How to Choose the Correct Electric Brakes for 20 Foot Flat Bed Trailer
    In order to find the correct electric brakes for your trailer you are going to need to know the axle capacity. You should be able to find this on your axle tag. Once you have this information you will be able to choose the correct brake assemblies for your trailer. For example, if you have tandem 3,500 lb axles then you could use the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469. These are self-adjusting brakes that fit a 10...
    view full answer...
  • Replacement Brake Assembly For 5,200LB Al-KO Axle
    Yes, the Dexter Electric Trailer Brake Kit # 23-180-181 will fit the 5,200lb AL-KO axles. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-458-459. This will allow the brakes to self adjust meaning less hassle for you adjusting brakes.
    view full answer...
  • What Is The Difference Between Dexter Electric Brakes 23-180-181 and 23-105-106?
    The difference between the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs # 23-180-181 and the # 23-105-106 you mentioned are the strength of the brake magnets. The # 23-180-181 was designed for 7000lb axles where the # 23-105-106 was designed for 6000lb axles so it has slightly weaker brake magnets. They are both 12" x 2" brakes so they are interchangeable, but you will want to match them to the weight rating of your axle to make sure you get adequate...
    view full answer...
  • Can Dexter Brake Assemblies 23-180-181 Work in Place of 23-105-106
    Yes the Dexter brake assemblies part # 23-180-181 would work in place of the # 23-105-106. They are the same size and the capacity range matches as well.
    view full answer...
  • Can 7K 12 Inch Electric Brakes be Used for 8K Trailer Axles
    The Dexter Electric Trailer Brake Kit # 23-180-181 will work for your 8K axles if indeed your current brakes are electric, have a 12" diameter, and measure 2" wide. Standard 8K brakes like part # 23-402-403 though are hydraulic, have a 12-1/4" diameter, and measure 3-3/8" wide. As long as your specs match the 7K electric brakes you're good to go.
    view full answer...
  • Do Dexter 7k Trailer Brake Assemblies Require Manual Adjustment
    When adjusting trailer brake assemblies like the Dexter 7k set part # 23-180-181 you want to tighten them down till there is a light drag on the wheel as you turn them by hand. To see how to manually adjust trailer brake assemblies check out the video I attached, fast-forward to the 4:35 mark of the video. Another option is a set of self-adjusting brake assemblies like the part # 23-464-465 which actively tighten as needed when you use them. These require no adjustment ever.
    view full answer...
  • Replacement Brake Assemblies for Axletek-12-GG Electric Brakes
    Thanks for the pictures! Yes, you can replace your Axletek-12-GG brakes with a set of Dexter ones. You will want to use the Dexter Electric Trailer Brake Kit - 12" item # 23-464-465. This kit is a pair of left and right assemblies that are an exact match to what you have that are also self adjusting. If you do not want self adjusting Dexter brakes, then you will need item # 23-180-181.
    view full answer...
    Image 1 for Image 2 for
  • Can 12 Inch, 7,000 lb Electric Trailer Brake Kit Work on Vehicle With 24 Volt System
    Though I'm not quite sure what you are referring to in regards to a misunderstanding, your truck with a 24 volt system is compatible with 12 volt electric brakes, the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs # 23-180-181. The power to the brakes will actually come via the brake controller, so you will need to wire your brake controller a bit differently in order to get working brakes. I have added a link below to a help article on how to do this,...
    view full answer...
  • Is Using Electric Brakes on a Boat Trailer Recommended
    You can indeed use electric brakes on a boat trailer. At one time it wasn't a recommended practice, but then the boat manufacturers started using electric brakes on trailers and found that it works fine. I would urge you to unplug the trailer before backing it into the water, and when pulling out allowing a few minutes to drain and dry out somewhat before plugging back in. The Dexter # 23-180-181 brake assemblies are meant for 7K axles using 12x2 inch brake assemblies. The assemblies...
    view full answer...
  • Comparison of Quality and Weight Rating- etrailer Brand Versus Dexter Brand 12 x 2 Brake Assemblies
    Great question. The etrailer brand # AKEBRK-6 12x2 inch brake assemblies are designed for 5200-7000 lb axles, are manufactured overseas and would work perfectly well for your tandem 7K axle trailer. Dexter, on the other hand makes specific brake assemblies for a 5.2K, a 6K or a 7K axle. The brake assemblies are manufactured in the US and as expected, the quality would be a little better but that additional quality comes at an increased cost. For a 7K axle, you'd use # 23-180-181. If...
    view full answer...
  • Best replacement # 10-36 Grease Seal
    To replace your Dexter 10-36 grease seals I recommend using the Redline Grease Seal # 10-36. This seal has an inner diameter of 2.25" and outer diameter of 3.376". This is a double lip seal. I have attached a review video as well as a helpful article on replacing the bearings, races and seals on a trailer hub for your reference.
    view full answer...
  • Torque For Installation of Dexter Electric Trailer Brake Kit 23-180-181
    According to Dexter, the torque should be between 25-50 ft. lbs. when installing the # 23-180-181. If you don't already have mounting hardware you'll need the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12.
    view full answer...


< Previous



Do you have a question about this Trailer Brake?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer brakes for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer brake information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924