bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Our Price: $209.81
You Save: $165.76
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 22 lbs
Draw-Tite Trailer Hitch - 24775
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Great Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24775 can be ordered online at or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (65)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Draw-Tite
  • Concealed Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

24775 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60846 Hidden Hitch Class 1 Trailer Hitch Receiver

Item # 24775

Installation Details 24775 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24775

Average Customer Rating:  4.8 out of 5 stars   (65 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


hell of a time fishing the carriage bolts through the bumper frame i got it though. Other than that nice product.

Works awesome, pulling a seadoo behind my car. used it yesterday.
Justin - 08/12/2022


The installation was no major problem except for drilling the 2 holes in the bumper and than trying to fish the 2 bolts thru the inside of the bumper, the bolts are a1/4 inch too long, other than that the hitch is great.

I have a Mazda 6i sport. I notice in some of the pics that the bar touch some even pushes up against the bumper fascia. Is that a problem for you? What holes did you have to drill and do you have to use a special drill bit?
-- comment by: Alex - 10/23/2013

2006 Ford Fusion

I would like to say that my hitch arrived 3 day sooner then I was told,thats is a plus and the product is easy to install,just like the video show insulation instructions.


The hitch fit and bolted up perfectly!


Fits nicely into all of the connection points and all components work and fit nicely.

Small tips to anyone looking to buy one tho:

If you have an aftermarket bumper like mine be prepared to drill a slot out.

The drilling into the frame is made out of reallllyyy hard stamped steel which we couldn't drill out with a handheld drill it required a Dumore.

Also you can poke a hole into the spare wheel rubbers and reuse the seals to reduce vibration and water proofing.

2009 Ford Fusion

i am extremely pleased with this product, from ease of ordering, to ease of installation !!
the installation video was very helpful.
quick delivery also a plus.
who ever designed the metal bolt string to fish bolts into rear bumper reinforcement is a genius !! probably rich by now too. with that invention.
did it at home in very minimal time. will highly recommend this product and company !!!!!

2011 Mazda 3

Fits well, tucks up nicely behind the bumper cover. Sturdy and well built. Bought for use with bike rack.


Trailer and hitch worked!!! A great success as it was for my husband who is an avid cyclist. Works excellent with his Mazda 6 I would recommend this for anyone who needs to load a bike on a car. Or needs to add a hitch to hold a bike rack.


Thursday evening I called to place an order for a Draw-Tite hitch and a Swagman XC bicycle carrier. I talked with Laura H. at She was very friendly and I was so impressed with her knowledge of the products and her thoroughness. Laura took the time to make 100% sure that I was ordering the correct hitch for my car and the correct carrier to fit the hitch. I was notified when my order shipped the next morning and was provided with tracking information that kept me informed of where my order was and when it would be delivered. As promised, my order was delivered the following Monday.

I was totally surprised when I opened the box. The hitch and bike carrier were packaged so much better than more for more fragile products I have ordered from other companies in the past. Every part I needed for installation was included along with clear instructions for installation and use. Everything on the Draw-Tite hitch lined up perfectly and it was very easy to install on my car.
The Swagman XC carrier is very well made and sturdy and it holds our bicycles very securely.

I am very impressed with the staff at and also with the products they sell and I would highly recommend them to anyone.

I LOVE both the Draw-Tite Hitch and the Swagman Hitch Bike Rack. I have used them numerous times over the past year and they performed flawlessly.I have highly recommended both of these products, and, to my friends and family.You can be sure that when I am in the market for these types of products again I will most assuredly buy them from
Jim M - 05/16/2014

Chevrolet Colorado

I purchased this receiver hitch to accommodate a three bike rack for our summer vacation to Colorado last year. I won't say installation was a breeze, but it wasn't terribly difficult either. It just takes a little finesse to fish the bolts through the frame. We have since used the bike rack several times and the hitch has remained solid. I would definitely recommend this style hitch for anyone interested in light hauling.

2008 Ford Fusion

Product is fine however main issue is installation. The reinforcement plate and carrier bolt combination were too tall to fit completely turn and fit inside the frame on my 2008 Fusion. The easy fix for us was to by 2 1.5" carrier bolts that were slightly shorter than the ones that came with the hitch. This worked fine. Other than that no complaints. I will say that the hitch is very close to the bumper on the car (within an inch both ways) which may cause some headache in attaching my bike rack. Good product though.

2007 Ford Fusion

this hitch is all that its described as ...and LESS!!! Which is great because its very functional but totally invisible beyond the tiny little square hitch receptacle portion ...I love it and highly recommend making this your first choice. Compares quite favorably with a hitch I recently put on another one of our cars costing over 4 times as much. Also, E-trailer was fabulous to work with as an unexpected delay from the manufacturer resulted in a delayed shipment to them...however they had the product TO ME on time as originally expected! TERRIFIC CUSTOMER SERVICE!!!!!!!


The receiver is unnoticeable when hitch is not installed. The instruction video was very accurate and to the point. I believe the bumper support is hardened steel and is very difficult to drill, I highly recommend purchasing a Cobalt bit, which will save you much agony especially if you don't have a lift rack access.

2007 Ford Fusion

All I wanted was a trailer hitch for my fusion so that I could put a carrier rack behind the car for a vacation. So I ordered the least expensive one I could fine from etrailer. The hitch arrived exactly on time when I got home from work yesterday at 4 o'clock I had it completely installed by 730. The directions were OK but I could make sense of them ,the only problem that I had was using the wire with the curly cues to pull the bolt through the frame.I needed to elongate the holes instead of having them round, I struggled for an hour trying to get the bolt in a round hole and they would not go. Once the hole was egg shaped installation went at lightning speed. I added a little RTV sealant in the spare tire well to keep moisture coming in from underneath.

2007 Mercury Milan

Overall installation wasn't too bad. Bolts which are meant to be fished through the bumper are too long. It's not possible to rotate them up and slide them through the drilled holes on a 2007 Mercury Milan. I had to cut 1/4" off these two bolts.
Otherwise, the hitch seems very solid and fits well.

Mike,Thank you for your review.The bolts that came in the hardware kit for the 2007 Mercury Milan are designed to be fished through the frame using the bolt leader provided. It may take a bit of maneuvering to get the bolt through the frame and to the mounting holes. We do not recommend trimming the bolts since it may void your warranty or affect the integrity of the hitch.
-- Etrailer Expert Heather A - 12/04/2017

2007 Mercury Milan

I have a Mercury Milan 2007 premier it had the two holes in the trunk pan and the two bolts you pull out of the bulkhead everything fit right up when it come to drilling the holes in your bumper support many people have said bolts are too long however if you have a die grinder or 1/2 inch drill slot the holes out to the same size the hitche is and the bolts will go right in it is damn near impossible to just drill a half-inch hole and get them in I tried that if you only have a drill you can Waller the whole out but make sure you Waller it to the same size that the hitch is and everything will be fine I had no problem doing this by myself pretty simple installation if you Waller them Holes out do not attempt to make a half inch hole it's not going to work and don't cut the boltswell I'm off to hook up the boat oh PS make sure you order the wiring harness with the hitch

2009 Ford Fusion

Overall, very satisfied with this product! Shipping was fast and installation was pretty straightforward. I found the installation video very helpful and the same steps applied for my car (the '09 Fusion SEL model with V6 engine and two mufflers in the back). Only difference was having to lower two mufflers vs. one, everything else worked the same as in the video. Only challenges during installation were drilling through the frame of the car and fishing the carriage bolts through the bumper support as they were a little too long. I simply cut a 1/4" of the bolts off and secured the bolt to the metal plate with some electrical tape before fishing it through the bumper support and this made it much easier. You could also consider drilling the holes a little bigger than 1/2" but make sure you have a decent drill bit for getting through the frame (it took a while for me).


Installed on my 2006 Mazda 6 S. The process was very straightforward, and the video was helpful. Drilling through the trunk bottom was unfortunate, but it's good to have 6 mounting points for a trailer hitch for sure.

2006 Ford Fusion

Hitch fit my 2006 Fusion perfectly. Installation video was excellent and my own installation went like clockwork. Everything I expected was in the kit. You can't even see that it is there when the ball mount is removed. Totally satisfied all around and couldn't be happier.

2006 Mazda 6

Still can't find an adapter to fit this hitch. I need to go from 2" to 1 1/4 but haven't found any of the standard adaptors side all the way in so the pin holes can line up. Very disappointed. Wasted money.

2007 Mazda 6

This went together EXACTLY like the video indicated it would. Rolled car's rear tires up on ramps and worked with a creeper under the car. This was well engineered and simple to install. 60 minutes later I was putting my tools away. Can't get any better than that.

2009 Ford Fusion

The hitch arrived quickly and fit my car. The installation was not as easy as described in the video (specifically drilling the 1/2" holes in the frame and using the pull wire) but was still able to get it done. etrailer customer support was helpful.

2008 Ford Fusion

The trailer hitch i bought has been amazing! I needed extra cargo space and this did the trick! The installation was easy and straight forward.


Overall the hitch went in well and I still have to install the wiring. It took me about 2 and half hours but that included getting the car up on blocks and finding tools. I did like the videos on how to do the install...wish I had a hoist to install like they did.

2007 Mazda 6

Very easy installation and the instructions and video make it a breeze to install. I did this install by myself but i would recommend having a friend to help out when you have to tighten down the first 2 bolts. I cant complain at all about the fast shipping, great communication and notified where my order was at every time it changed the status.

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Differences in Trailer Hitch Installation Between a 2008 and 2009 Ford Fusion
    The 2008 and 2009 Ford Fusions are from the same generation meaning that as far as installing a trailer hitch goes, the steps and attachment points are going to be the same. The video, linked below for reference, does feature a 2008 Ford Fusion and also a Draw-Tite trailer hitch, # 24775. Both this hitch and the Hidden Hitch, # 60846 (no longer available) that you have referenced will fit a 2008 or 2009 Ford Fusion because they have the same design. So, when installing the trailer hitch...
    view full answer...
  • Tips for Installing Draw-Tite 1-1/4 Trailer Hitch 24785 on a 2007 Mazda 6 Sport Wagon
    You should be able to just pop out the two rubber plugs in the trunk pan of your 2007 Mazda 6 Sport Wagon, using a flat head screwdriver or trim removal tool. Draw-Tite model # 24785 does not require you to lower your exhaust to complete the installation, as the entire hitch assembly runs along the center of the vehicle, between the exhaust. Once you have popped out the two plugs, move straight back from these holes, staying in the center of the vehicle. Once you reach the inner bumper...
    view full answer...
  • 2005 Nissan Pathfinder Trailer Blinker Isn't Working Solution
    The blue relays part # 38666-1 are turn signal relays for Nissans like your 2005 Nissan Pathfinder. If the fuses are good and the blinkers are not working these are what you'd need to get them going again. The relays will install in the relay box under your hood on the passenger side of the vehicle.
    view full answer...
    Image 1 for
  • Ground Clearance with a Trailer Hitch Installed on a 2006 Ford Fusion
    Draw-Tite trailer hitch # 24775 has the receiver directly under the rear fascia. The bottom of the receiver will be approximately 1-1/2 to 1-3/4 inches below the bottom of the rear fascia. I have included an image showing the hitch in its final position. If you measure from the ground to the bottom of the fascia and subtract 1-3/4 inches that is approximately where the bottom of the hitch will be. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you...
    view full answer...
    Image 1 for
  • Can a 2008 Mercury Milan With Class I Hitch Tow a 16 Foot Tracker Boat
    It sounds like you have a Class I hitch like the Draw-Tite Sportframe Trailer Hitch Receiver # 24775 on your 2008 Mercury Milan. A Class I hitch like this will have a maximum gross trailer weight of 2,000 lbs and tongue weight of 200 lbs. You will also need to know the towing capacity of your vehicle and will be limited by whichever is lower. Assuming the weight of your boat and boat trailer do not exceed the capacity of your vehicle or hitch, you will be able to tow it.
    view full answer...
  • Which Trailer Hitches and Wiring Will Fit on a 2009 Ford Fusion
    We do have several hitches available for your 2009 Ford Fusion, but # 60254 is not one of them and has been discontinued. The comparable hitch to the one you referenced is the Draw-Tite Trailer Hitch, # 24775. You might also be interested in adding the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, # 118422. This is a T-one style harness that plugs in line with your vehicles taillights and provides a 4-Way connector at the rear of the vehicle. The powered converter requires...
    view full answer...
  • Swapping Hitch Between Different Generations of Same Vehicle
    The Draw-Tite Class I hitch you referred to, part # 24865 is a fit for the 2010-2012 Ford Fusion, 2010-2011 Mercury Milan and the 2010-2012 Lincoln MKZ only. It won't fit your 2006 Fusion. For the 2006, you'd want the Draw-Tite # 24775. If you look at both hitches, as well as their installation procedure, you can see that the two hitches are quite different. I've linked you to install instructions and videos for both hitches. Even if the same hitch fit both vehicles, the hitch hardware...
    view full answer...
  • Can the Foot-Activated Liftgate Still Work with Trailer Hitch Installed on a 2015 Ford Edge
    I recommend going with the Draw-Tite Trailer Hitch # 75234 for your 2015 Ford Edge. This is a Class III trailer hitch with a 2" receiver that will not prohibit the use of your foot-activated tailgate although you may have to kick straight out in a different spot than you do now (see attached picture). If you let me know what you will be using this hitch for I can make additional recommendations if necessary. As far as towing with your 2008 Ford Fusion is concerned, I took a look at the...
    view full answer...
    Image 1 for
  • Recommended Trailer Hitch Receiver and 2 Bike Rack for 2008 Ford Fusion with Rear Spoiler
    For your 2008 Ford Fusion I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24775. This hitch is an easy installation that you can do or have any local mechanic you trust do for you. I've attached a video as well as the installation details to assist. The 1-1/4 inch hitch is decently recessed under the bumper of your vehicle, so I recommend the Thule EasyFold XT 2 Bike Platform Rack # TH903202. This bike rack will give you 8 inches from the...
    view full answer...
    Image 1 for Image 2 for
  • Hitch Availability for a 2009 Lincoln MKZ
    We do have hitches available that have been confirmed to fit your 2009 Lincoln MKZ, but if Lincoln says you can't tow with your vehicle then we can't recommend you do so. Basically the hitch manufacturers will make hitches for vehicles as long as there is a demand for them, regardless of what the vehicle manufacturer recommends. For your vehicle you may still be able to carry a bike rack like the Swagman XTC2 # S64670 so a hitch like the Draw-Tite part # 24775 would work well for this.
    view full answer...
  • Pulling Installation Bolts Through the Frame when Installing Trailer Hitch on a 2008 Ford Fusion
    When installing a hitch that requires drilling on your 2008 Ford Fusion, like the Draw-Tite Sportframe Trailer Hitch Receiver # 24775, you will need to use a little extra force to pull the bolts through the hole that you drilled. When I first started here I helped out installing a trailer hitch on a vehicle and I had the same thought that you did. I quickly found out that if you have enough of the wire threaded on the bolt, you can actually give it a good yank and it will stay on the bolt. Worst...
    view full answer...
  • Trailer Hitch that Fits 2009 Ford Fusion
    We have the Draw Tite trailer hitch # 24775 for the 2009 Ford Fusion that has a towing capacity of 2,000 lbs. This capacity though is independent of the capacity of your vehicle. I tried looking up the capacity for it online and most places say it wasn't listed or it's not rated for any towing. So I really wouldn't feel comfortable telling you that your vehicle could tow a 1,500 lb trailer. Especialy on the hills you describe. If you really wanted to do it though I would recommend checking...
    view full answer...
  • Trunk Mounted Bike Rack Recommendation for a 2006 Mazda Speed 6 Hatchback
    There are no hitches available that are confirmed to fit your Mazda Speed 6, but in case you are looking for a way to transport bikes there is a trunk mounted bike rack option available. The Hollywood Racks Over-the-Top 2 Bike Carrier # HRF2 has been confirmed to fit your vehicle and would work well. If you plan on carrying any womens or alternative framed bikes without horizontal top tubes you may also be interested in purchasing a Swagman Easy-Out Women's and Alternative Frame Bike...
    view full answer...
  • Parts Needed to Tow Trailer with 2004 Mazda 6
    If you went with a 2004 Mazda 6 we have the Draw Tite hitch part # 24775 which fits the sedans and 5 door hatchbacks that has a 2,000 lb capacity. For trailer wiring you'd then want the part # 118405 which is a custom fit and then for a ball mount you'd want the part # 3594 and hitch ball # 19256. If you were thinking about a different vehicle let me know and I can see what would work for that as well.
    view full answer...
  • Comparing the Curt and Draw Tite Hitches for a 2009 Ford Fusion
    The two different hitches for your 2009 Ford Fusion are basically two different brands versions of the hitch fit for your vehicle. We have the Curt # C11329 and the Draw Tite part # 24775. The Draw Tite part # 24775 is the hitch I'd recommend for a couple reasons. It has the better price and when used with a non-supported load like a bike rack it doesn't require a stabilizer strap like part # 18050 like the Curt does.
    view full answer...
  • Can a 2008 Ford Fusion Accept a Class II Hitch to Allow Use of Wheelchair Carrier
    All of the trailer hitches offered for your 2008 Ford Fusion (a great car - I used to own one until an East Coast blizzard took her away from me) are light-duty Class I types with a 200-lb tongue weight capacity. These do not have the capacity to transport a wheelchair and carrier and no Class II hitches are available for the vehicle. Your option then is to use a small trailer (which will work with one of these Class I hitches). Local outdoor and farm stores often carry small utility trailers...
    view full answer...
  • Is There a 2" Trailer Hitch Available for a 2009 Ford Fusion
    I do have an option for you but they do not make a 2" trailer hitch receiver for your 2009 Ford Fusion to my knowledge. Instead, you will want to choose from the Curt Trailer Hitch Receiver part # C11329 or the Draw-Tite Sportframe Trailer Hitch Receiver part # 24775 which both have 1-1/4" receiver tube openings. In order to get a 2" receiver tube opening on your Fusion you will need to use an adapter like part # HTAD but please keep in mind that this will reduce the hitch capacity by...
    view full answer...
  • Can a 2009 Lincoln MKZ Pull a Pop-Up Camper
    In order to tow a trailer with a 2009 Lincoln MKZ you'll need a trailer hitch, trailer wiring harness, and ball mount/hitch ball. I will attach a list below with each of these options. In regards to capacity and compatibility, you'll have to refer to your copy of the owner's manual for this which should be located in the glove box. We cannot recommend deviating from the manufactures instructions. Draw-Tite Sportframe Trailer Hitch Receiver part # 24775 T-One Vehicle Wiring Harness with...
    view full answer...
  • Hitch & Bike Rack Recommendation For 2008 Ford Fusion
    Both of the trailer hitches we carry for the 2008 Ford Fusion are similar in price. If you're looking primarily for a trailer hitch, the one I recommend most is the Draw-Tite Sportframe Class I # 24775 However, if cost is your primary concern and the only thing you're looking to haul are bicycles, you might consider a trunk mounted bike rack instead, which could cost about half as much as the hitch. The Hollywood Racks Express 2 Bike Rack # HRE2 is a fine product that will meet that specific...
    view full answer...
  • Trailer Hitch and Wiring for a 2006 Ford Fusion
    That was a nice gift but Hidden hitch trailer hitch 60282 will not fit a 2006 Ford Fusion. It used to fit 2010 to 2012 Fusions, 2010 and 2011 Mercury Milans, and 2010 to 2012 Lincoln MKZs. But that hitch is now discontinued. The comparable trailer hitch for the 2006 Ford Fusion is # 24775. I have linked a video showing how it installs. If you plan on doing some towing the correct ball mount is # 3592. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring...
    view full answer...
  • Hitch Comparison and Recommendation for a 2008 Ford Fusion
    The only real difference between the Draw Tite hitch part # 24775 and the Hidden Hitch part # 60846 (no longer available) is that the Hidden Hitch comes with a ball mount and a pin and clip. These hitches are made by the same parent company and are identical. In case you don't have a ball mount yet you would also want the part # 3592, and then for a 2 inch ball # 19258 and for a 1-7/8 inch ball # 19256. For trailer wiring you would want the part # 118422.
    view full answer...
  • Trailer Hitch and Bike Rack Recommendations for a 2008 Ford Fusion
    Class I trailer hitches such as # C11329 can hold bikes but are limited to 2 bikes and the rack has to be compatible with a Class I hitch. I recommend the Curt # C18085 which will hold bikes weighing up to 45 pounds each. I have linked a video review of this rack for you. But for your 2008 Ford Fusion I actually recommend Draw-Tite hitch # 24775 for a couple of reasons. First, it costs less. And second it does not require a stabilization strap for non-trailer loads like the Curt hitch...
    view full answer...
  • Fit of Trunk Mounted Bike Carrier on 2006 Mazda 6 Hatchback
    Your best bet would be to install a receiver hitch like the Draw-Tite Class I receiver, part # 24775. The hitch can be used as an attachment point for a bike rack. Because of the limited weight bearing ability of the Class I receiver, you will be limited to carrying two bikes and would need to choose a rack that is compatible with a Class I receiver. None of our bike rack manufacturers recommend using trunk mounted racks on the Mazda 6 hatchback model, because the hatchback is not strong...
    view full answer...
  • Enclosed Cargo Carrier And Trailer Hitch For A 2008 Lincoln MKZ
    To be able to use the 23x47 Carpod Walled Cargo Carrier w/ Lid # M2205-2201 with your 2008 Lincoln MKZ, you'll first need a trailer hitch like the Draw-Tite Sportframe Trailer Hitch Receiver # 24775. This trailer hitch is a class I trailer hitch with a maximum towing capacity of 2,000lbs, and has a maximum tongue weight capacity of 200lbs. Since # M2205-2201 is designed to work in 2" x 2" trailer hitch receivers, you'll need to use the Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver...
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Chris R
Video Edited:
Chris R
Employee Nicholas E
Test Fit:
Nicholas E
Employee Alan C
Test Fit:
Alan C
Employee Kathleen M
Video by:
Kathleen M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-636-306-4830