bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class I
  4. 1-1/4 Inch Hitch
  5. 2000 lbs GTW
  6. Visible Cross Tube
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

Item # 24912
lowest price pledge
Our Price: $169.07
You Save: $113.80
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 24 lbs
In Stock
Draw-Tite Trailer Hitch - 24912
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos


Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" part number 24912 can be ordered online at or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (43)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 24912

  • Class I
  • 1-1/4 Inch Hitch
  • 2000 lbs GTW
  • Draw-Tite
  • Visible Cross Tube
  • 200 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Drawbar and pin and clip sold separately


  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class I
    • Maximum gross trailer weight: 2,000 lbs
    • Maximum tongue weight: 200 lbs
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

24912 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe

60344 Hidden Hitch Class 1 Trailer Hitch Receiver

Installation Details 24912 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Reviews

Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24912

Average Customer Rating:  4.9 out of 5 stars   (43 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

2016 Mazda 3

Bought this in 2021 for my 2016 Mazda3 sedan. Fits like a glove, very easy installation without the need to cut any relief in the rear bumper. The detailed videos provided on etrailer's website do a very good job in explaining the install process. I use it to mount a hitch type bike rack. Would highly recommend this to anyone in the market for a great quality tow hitch. Sits well underneath the rear bumper and does not stick too far out.


Great trailer hitch receiver- perfect for my Mazda 3. I use it for a bike rack. Well done etrailer!


The product arrived with missing paint and scratch marks despite no visible harm to the packaging (it looks like it was used). I overlooked this as its going to be hidden anyway. When I attempted to install the hitch, it became clear that it does not fit my car nor was it made to fit my car. Both the clearance cuts and the hole spacing are off by several inches.

2016 Mazda 3

I didn't have to drop the muffler. This was the easiest install I have done! Used a bucket to hold the hitch and was done in 30 minutes!

2007 Honda CR-V

The hitch came in a big protective box in a very timely manner. My friend bought the same hitch from another online retailer (I think) and his did not have a box, but was plastic-wrapped, which isn't very protective. All the parts were included, though the instructions were very rudimentary, I had watched the video on many times, and installation was a breeze!! I really didn't want to lower the exhaust and happily we did not need to. The hitch nestled in there perfectly! The video made putting in the bolts look simple and like most car endeavors I figured it would take me an hour to do it, but like the video it was remarkably simple!!! I would say that installation took less than the 40 minutes that were predicted and saved hundreds of dollars that a mechanic would charge. The hitch is solid and with the Swagman bike rack, there is no sway in the hitch. I was concerned that my back up camera would be useless and am happy to say that there is no issue.
Strongly Recommend!!

After a year still happy with the hitch and Swagman bike rack!
Eric - 04/13/2021


Strong, no rust after 1 year everything great quality

2014 Mazda 3

Installing the Draw-tite hitch on my girlfriend's cute 2014 Mazda 3 was a breeze after studying the videos. No need to remove the muffler or raise up the car at all. After having the mounting bolts in place using the handy wires and resting the hitch on about 8" of wood blocks, my girlfriend helped in keeping the hitch steady while I bolted it onto the car. It took us about 25 minutes in all. Then came the wiring nightmare. The first part involving the connectors to the car's tail lights was fast and simple. The second part which involved sneaking the included power wire out of the trunk, through the car, then through the engine firewall and into the engine compartment was enough to drive a good man bad. Honestly, especially when meaning to only tow a small trailer with about four lights on it, is it really necessary to go directly to the battery as a power source??? And I wasn't about to run the power wire along the underside of the car. Anyway, after spending about an hour trying to figure out how I was going to sneak the supplied power wire through the engine compartment firewall, I got out my drill, picked a drill bit slightly wider that the wire, bore a hole on the driver's side and into the engine compartment, hooked the wire to the battery using the supplied wired fuse, sealed the drilled hole with the supplied black silicone sealant, put the car back together, and finally was done. As I wrote, installing the hitch took 25 minutes to complete. Installing the wiring was a four hour drama I'm so relieved to be done with I'm having a double shot of rum in my rum punch, and after that I'm having another one. I'm giving this four stars because after all that install time the trailer lights work just fine. I just wish the install hadn't wound up being such a nightmare.

2014 Mazda 3

I purchased this product about two weeks ago. The reason I got it is to get a trailer hitch bike rack for my sedan.

Things to know about this hitch.
- If you are going to use it with a bike rack this hitch does not require the stabilizing strap which is great

-This hitch does not requires to cut into the bottom of the bumper which was needed with the other hitch for my car.

- It took me about two and half hours to install it, since i did it by my self. The hardest part was to get the hitch in place to bolt it to the frame. The most time consuming part was trying to figure out how to get the first bolt and metal plate in place and once that was done the other 3 went in much faster. Online instructions and the videos that they have helped a lot.

-Be aware of the hitch weight limit of 200LBS which can be a problem if you are planning to carry an Ebike as they tend to be pretty heavy.

-I have a low car and i was worried about ground clearance and it didn't change at all for me. The same goes for the length of the vehicle as the hitch does not extent past the bumper and that lets me keep parking my car in the garage as i was doing before.

The hitch has work better than I thought. I have not had any issues at all and I wish I had done it earlier. The main use is to attached my bike rack to it and it takes me less that ten minutes to get the bike on the car and that includes taking the car out if the garage and installing the bike rack. I can honestly say that I will get one of this things for my next car without doubt I need to add that I have a 2014 Mazda 3 sport. Sedan.
Victor - 05/11/2019


Install was very easy with video. It took 15 minutes and the hitch has worked great.


I can't submit a photo because I don't have it installed yet, but the Hitch arrived nicely insulated from scratches. It was packed very well. It is black and shiny and you can see that it is sturdy and well made.
Definitely a value when you shop at etrailer!


Installed by myself without lifting the car up by using my car’s tire jack. 1. Get the bolts inserted in the frame and ready. 2. Get the mount above the exhaust system on *both sides*! 3. Jack up one side of the mount so the screws poke through the holes on the mount, remove the wire from the bolts, loosely fasten nuts. 4. With one side held on by bolts, jack up the other side and fasten nuts.

Install took about 1.5 hrs.

2018 Mazda 3

Works as advertised on my 2018 Mazda3 sedan. Only had it installed a couple days so far. Installation was relatively easy - I did it myself in 1 hr. I ended up coating this with truck bed product by Rustoleum as an added layer of protection before I mounted it. I'm interested to see how it holds up through Midwest winters. I selected this hitch primarily because it was lighter weight than others and was on par with pricing.

Holding up well after one year or use. I only use this for 2-bike platform style rack a couple times a week.
Patrick - 04/08/2019


This hitch went onto my car super easily, the included instructions were fantastic, and I've used it to haul all manner of stuff with my little landscape trailer. The included bolt-threading tools and clever way the hitch bolts to the car made the install a piece of cake. I did it myself in my driveway in about an hour.

This little hitch still takes everything Ive thrown at it. Turns my little sedan into a workhorse when I pop the trailer on. Great hitch.
Kate M - 09/16/2020


The hitch receiver fit perfectly and was simple to install. Nothing had to be cut or moved on the 2018 Mazda 3 for the receiver to be bolted to the rear frame rails. The only issue was there were a couple of places where there was no paint. The metal was clean and the unpainted part wouldn't be seen. I just sprayed it with some clear I had on hand to keep it from rusting.


Fab service and assistance at etrailer! I could not be happier with the product, too!

2016 Mazda 3

Customer service was great. They were very helpful and gave me all the info I needed to pick the right hitch. Shipping was fast. Installation was a breeze (and FAR easier than I anticipated!). This was a no brainer of a deal and I would have no hesitation about ordering from etrailer again or recommending them to anyone.

Very happy with the hitch. It is well designed and well made. It is simple and fast to attach my bike rack. Highly recommended
Ed - 08/13/2020


Amazing product, easy installation I did it by myself alone and good price

2016 Mazda 3

This trailer hitch worked out fantastic for us on our Mazda 3! It was shipped quickly, the installation instructions were easy to understand, they provided some special tools to make it easier and the installation took me less than an hour. We've used the hitch several times with a bike rack and small utility great! We saved over $200 versus the cost of having a local company install a hitch. We also liked that it is pretty well hidden so it doesn't detract from the look of the car.

2014 Mazda 3

Build quality looks good. Heavy frame. Holes line up. Easy to install for two people. Sits a little lower than I suspected.


One year ago this car hitch arrived and installed without a hitch! As always, a main concern was whether it would really fit our car model, and it did. For ease we had it installed at our local garage, with no problems at all. We pre-placed the bolts thru the holes so the job went quickly at the shop. The hitch is solid, we would definitely order another in the future. Also, we have placed a few orders thru etrailer and every order and product has been prompt and reliable. And we appreciate the 1-year follow-up seeking our opinions. Thank you etrailer.

2017 Mazda 3

Draw-Tite receiver hitch installed on a 2017 Mazda 3. To be used only for a platform bike rack. Instillation was very easy, although having another person to assist holding the hitch in place when starting the nuts would be helpful. That being said, it took 20 minutes to install, everything lined up, no need to move the exhaust system or any wiring. Highly recommend this product.

2014 Mazda 3

Shipped and arrived promply. Installed on my 2014 Mazda 3 Sedan. Had no problem installing without lowering exhaust. Read instructions prior and look under car at attachment location as many times as needed until you have a clear vision of the install. I used a plastic storage container that stood about 8". This allowed me to sit hitch on top and move in position once guide wires and bolts were in position and install without help. Everything went smoothly, finished in about 50 minutes. Excellent product.


Easy to install and didn't require any prior knowledge or experience at all. The instructions were very clear and it only took me about 40 minutes to put it on myself. A year later and it's still working perfectly. I would totally buy this again.


I purchased and installed this hitch for my 2015 Mazda 3 Sedan one year ago. I’ve used it a ton for my bike rack and it has worked flawlessly. Easy to install, sleek, and gets the job done. Highly recommend this hitch.


I installed this with no adult supervision, it was that easy! It was fairly simple minus the removal of a couple of plastic rivets that were extremely difficult to remove. I am very happy with the hitch and look forward to hauling my bike around without having to take the hubby's truck now!

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch

  • Is There Bumper Cutting Required to Install Draw Tite Hitch on a 2014 Mazda 3
    There is no cutting or trimming of the rear fascia/bumper of your 2014 Mazda 3 required to install the Draw Tite hitch part # 24912. To see more install info check out the installation instructions I attached to the right. In the unlikely event of you having to replace the muffler of your vehicle you would not have to remove this hitch.
    view full answer...
  • Spacers Appear To Be Different From Spacers In Instructions Drawing For Hitch On 2014 Mazda 3
    There should be no problem using the spacers that came packaged with the Draw-Tite Sportframe Trailer Hitch Receiver, part # 24912. The spacers are designed to keep the bolt from slipping through the frame rail when installing. The shape of the spacer may have changed a little but the function remains the same. If the carriage bolt is secure when pulled through the hole in the spacer and then through the frame rail you have nothing to worry about.
    view full answer...
  • Process for Lowering Exhaust on 2015 Mazda 3 Sedan to Install Trailer Hitch
    I spoke with my contact at Draw-Tite and he said you will only need to lower the exhaust if you need additional clearance for installation of Draw-Tite trailer hitch # 24912 on your 2015 Mazda 3. If you find you need to lower the exhaust, you will want to do it at the rubber isolators. He recommended spraying a lubricant on the metal hanger rod and rubber isolator to help with removal. Other than those recommendations Cequent does not have a documented process for lowering the exhaust. We...
    view full answer...
  • Trailer Hitch and Wiring Recommendations for a 2016 Mazda 3i Touring Sedan
    Yes, Draw-Tite trailer hitch # 24912 will fit your 2016 Mazda 3i Touring sedan. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch. Also, with a bike rack, you are limited to 2 bikes maximum on a Class I hitch.
    view full answer...
  • Recommendation for a Hitch That Fits a 2015 Mazda 3 Sedan
    There are two different Draw-Tite trailer hitches that are designed to fit the 2015 Mazda 3. The difference between the two is in which body style is your Mazda 3. If you have the sedan model with or without LED taillights, then the Draw-Tite # 24912, will be the confirmed hitch to fit. This Draw-Tite hitch is custom-fit and does not require any drilling to install the hitch to your vehicle. If you have the hatchback model with or without LED taillights, then you will need the Draw-Tite...
    view full answer...
  • Can a 2016 Mazda 3 Carry a Motorbike Carrier With a Class I Hitch?
    I can confirm the Draw-Tite # 24912 will fit your 2016 Mazda 3 iSport and included an install video for you to take a look at. That being said, this is a Class I hitch and is only rated up to 200 pounds of tongue weight. So depending on how much the motorcycle carrier and motorcycle weigh together will determine if it will be able to be carried or not. With the low tongue weight, it may end up being better to tow a small trailer with the motorcycle on that. It should also be noted that...
    view full answer...
  • Draw-Tite Trailer Hitch Receiver to Fit 2016 Mazda 3 Sedan
    Close, however the correct Draw-Tite hitch for a Mazda 3 Sedan is part # 24912. This hitch will work on models with or without LED Lights. The other hitch, part # 24914, fits the hatchback models, and is shaped differently than the sedan model. I've included a few help articles about picking the right hitch and one of the most common uses of a hitch, how to pick a bike rack.
    view full answer...
  • Comparing Curt and Draw Tite Hitches for 2018 Mazda 3
    For your 2018 Mazda 3 we have Curt and Draw Tite hitches available. I recommend the Draw Tite hitches over the Curt hitches as they don't require the use of a stabilizer strap when carrying a non-supported load like a bike rack. So if you have a hatchback you'd want the Draw Tite part # 24914 or if you have a sedan you'd want the # 24912 instead.
    view full answer...
  • Trailer Hitch Fit for 2017 Mazda 3 with 2.0 liter Engine
    We have hitches that fit your 2017 Mazda 3 with a 2.0 liter like the # 24914 if it's a hatchback or the part # 24912 but the Hidden Hitch you mentioned actually fits older Ford vehicles.
    view full answer...
  • Availability of 2 inch Hitch Adapter for Class I Trailer Hitch
    Yes we do have 1-1/4 inch to 2 inch hitch adapters that would fit the Class I hitch part # 24912 that you referenced with the part # MT70032. You should note that these do cut the capacity of the hitch they are installed in by 50 percent.
    view full answer...
  • Does MaxxTow 2 inch Hitch Adapter Fit Class I Draw Tite Hitch # 24912
    The Draw Tite hitch part # 24912 is a newer Class I hitch that does not have a stop and would work with the MaxxTow 2 inch hitch adapter part # MT70032. These two would work great together without any issue.
    view full answer...
  • How to Transport a Wheelchair with a 2014 Mazda 3
    For a trailer hitch receiver confirmed to fit your 2014 Mazda 3, I recommend using the Draw-Tite Sportframe Trailer Hitch Receiver part # 24914 for hatchback models or part # 24912 for sedan models. Both of the above Draw-Tite Sportframe's are a Class I hitch with a 1-1/4" receiver tube opening. I do have an option that will allow you to transport your wheelchair on the back of the vehicle but we do not have any wheelchair lifts at this time. In order to haul your wheelchair around on...
    view full answer...
  • What is the Right Ball Mount for a Class I Draw-Tite Trailer Hitch on a 2014 Mazda 3
    It sounds like the ball mount you are using with Draw-Tite trailer hitch # 24912 on your 2014 Mazda 3 is actually a Class II ball mount. The hitch is a Class I which is why it has that safety stop in it. It is there to prevent installation of Class II accessories so you don't accidentally overload the hitch. For Class I trailer hitches, you have to use the ball mount specified by the hitch manufacturer. In this case it is # 3593. And when used with your hitch and vehicle it must be used...
    view full answer...
  • Recommended Trailer Hitch for 2015 Mazda 3 Sedan
    As you mentioned, both the Curt Class I # C11377 and the Draw-Tite Class I # 24912 Trailer Hitches are confirmed to fit your 2015 Mazda 3 Sedan Grand Touring. Both hitches will work with all models of the Mazda 3 Sedan, however the Draw-Tite # 24912, as you referenced, is going to be a considerably easier installation process and will take about half the time as the Curt Trailer Hitch. Also keep in mind that per Curt warranty guidelines, all non-trailer loads such as bike racks and cargo...
    view full answer...
  • Installing a Trailer Hitch on a 2016 Mazda 3 Sedan
    Though I can confirm the EcoHitch # 306-X7303 will absolutely fit a 2016 Mazda 3, we have yet to do an install with said hitch. However, we do have an install we did with a Draw-Tite # 24912 on a 2015 Mazda 3. There will be a few subtle differences, but they do attach the same way. I included that video for you to take a look at.
    view full answer...
  • Trailer Hitch and Platform Bike Rack Recommendation for 2014 Mazda 3 Sedan With LED Lights
    The Curt Class I trailer hitch you referenced, part # C11377, will indeed fit your 2014 Mazda 3 Sedan with LED lighting. I confirmed this with my contact at Curt. So too will the Draw-Tite # 24912. The Curt hitch does require use of their stabzilizing strap # 18050 with any bike rack in order to retain your hitch's warranty coverage. Two helpful articles on hitch installation are linked for you along with the written instructions. The hitches offered for your Mazda 3 are all light-duty...
    view full answer...
  • Class I Hitch for 2017 Mazda 3 Sedan for Transporting Bikes
    My contact at Draw-Tite advised that they gave recently confirmed the fit of hitch # 24912 on the 2017 Mazda 3 Sedan. This is a light-duty 1-1/4-inch Class I hitch that can handle the weight of up to 2 bikes, but not more than 2. A hitch-mount bike rack is the best way to protect your new car's paint finish. In this hitch you will need to use a Class I-compatible 2-bike rack like one of those shown on the linked page. A great option for a platform-style rack is the Swagman XTC-2 # S64670...
    view full answer...
  • Trailer Hitch Receiver for 2017 Mazda 3 Sedan and Correct Ball Mount
    Since your 2017 Mazda 3 is a sedan, the trailer hitch receiver that fits is the Draw-Tite Trailer Hitch Receiver # 24912; the other hitch you mentioned is not a fit for the hatchback, which I confirmed with Draw-Tite for you. The hatchback and sedan have different bolt hole alignments which is why there are two different hitches depending on the model. We do have the rest of the parts needed for you to do some light towing with your '17 Mazda 3 sedan, and to make it easier to order, I'll...
    view full answer...
  • Trailer Hitch Fit Recommendation for 2018 Mazda 3 Hatchback
    That's correct that the Draw-Tite # 24912 only fits the sedan model of the 2018 Mazda 3. Instead we carry Draw-Tite # 24914 and Curt # C11377. Of the two I like the Draw-Tite because it doesn't requrie the support strap, part # 18050, when you're using the hitch to barry a bike rack or cargo carrier.
    view full answer...
  • Trailer Hitch and Bike Rack Recommendation for a 2014 Mazda 3 Sedan
    For a trailer hitch confirmed to fit your 2014 Mazda 3 that would work great for carrying a bike rack you would want the Draw Tite part # 24912 as it does not require the use of a stabilizer strap like the Curt does for your vehicle. The fishwire needed to install this hitch is included with it. There also is no drilling required. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name...
    view full answer...
  • Compatibility of Curt Class I # C11377 and Swagman Trailhead # S63360 on 2014 Mazda 3 GT Sedan
    The Curt # C11377 would indeed be compatible with your Mazda 3, but when Curt Class I hitches are used with non trailer loads like a bike rack, Curt's warranty requirements specify that a stabilizing strap like # 18050 be used. Rather than needing to fool with a strap, I'd recommend you go with the Draw-Tite # 24912 that has no such requirement. The Swagman Trailhead bike rack you referred to, part # S63360 would work great with the hitch.
    view full answer...
  • Recommended Tow Package for 2018 Mazda 3 Sedan
    To set your 2018 Mazda 3 up for towing a light trailer you will need a trailer hitch, wiring harness, ball mount, and hitch ball. Starting with the hitch I recommend the Draw-Tite Sportframe Trailer Hitch Receiver # 24912 because it offers the easiest install process that doesn't require any modification to the underbody trim panel on your vehicle like with the other available option. It is a Class I hitch that features a 2,000 pound towing weight capacity and will provide you with a...
    view full answer...
  • Trailer Hitch for a 2018 Mazda 3 for Light Towing and Carrying Bikes
    For your 2018 Mazda 3 sedan Draw-Tite trailer hitch # 24912 will fit and is the hitch I recommend. The two pictures you have included are such different angles that the differences could be explained by the angles. I have included a link to the installation instructions so you can see how the hitch installs. The recommended ball mount for this hitch is # 3593. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring you can use Tekonsha harness # 118405...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Towing Set Up for 2018 Mazda 3
    We have towing components you can add to your 2018 Mazda 3 though I did take a look at the owner's manual and it stated that you should not tow a trailer with your vehicle so doing so would be at your own risk. If you do decide to tow you need to start with a trailer hitch, either the Draw-Tite # 24912 if your '18 Mazda 3 is a sedan or the Draw-Tite # 24914 if your Mazda is a hatchback; these are the best option because they will be the easiest to install. The ball mount that Draw-Tite...
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Joshua S
Video Edited:
Joshua S
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B
Employee Robert C
Test Fit:
Robert C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.