Don't Miss These Holiday Savings!
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ideal for the rigors of off-road towing, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form a strong connection that is safe and secure, no matter the terrain. 3-Position adjustment channel included.
Features:
Specs:
This hitch combines with a Lock 'N' Roll trailer-end coupler (sold separately) to create a safe, secure, fully articulating connection that's great for towing whether you're on the road or off-road. It's more secure than a traditional ball hitch, and it's more comfortable and quieter than a pintle setup. The Lock 'N' Roll connects quickly and easily, and can adapt to any towing conditions.
When using a traditional ball coupler, it can be hard to tell if the coupler is fully latched around the ball. You can head out assuming the connection is secure, only to have the trailer pop off of the ball and disconnect while you're towing. With the Lock 'N' Roll, that won't happen.
This unique hitch is designed to interlock with a matching trailer-side coupler to form a tight, secure connection. Unlike on a ball coupler, the latching components on the Lock 'N' Roll system are easy to see, so you can tell at a glance if the connection is secure.
Once secure, the Lock 'N' Roll setup offers a wide range of motion, which makes for a smooth ride. Because of the articulating action of the combined hitch and coupler, the Lock 'N' Roll connection can handle the harsh bumps and road shock that could otherwise stress and potentially damage a ball coupler.
The Lock 'N' Roll connection also makes your trailer less vulnerable to theft. Unlike a traditional ball coupler, which is compatible with any hitch ball of a matching size, the trailer-side Lock 'N' Roll coupler can only connect to a vehicle-side Lock 'N' Roll hitch. So your trailer cannot be towed away unless it's connected to a vehicle with a Lock 'N' Roll hitch installed.
With the Lock 'N' Roll, you can have peace of mind knowing your connection will not come apart or succumb to damage caused by road shock, nor will your trailer be vulnerable to theft.
The pintle hitch connection is the most common setup when towing off road because of the flexibility in the connection. But that flexible connection can also result in a lot of slop. This can cause uncomfortable jerking as well as rattle and noise. In addition, when using a pintle/lunette ring setup, it can be difficult to back up your vehicle and trailer without jackknifing. And it can be hard to disconnect at certain angles, which may be a necessity when overlanding.
The Lock 'N' Roll assembly, on the other hand, offers a close-fit, slop-free connection that's designed for off-roading. This close-fitting design provides a smoother ride than a pintle/lunette ring connection with less rattle. It also makes it easy to back your vehicle and trailer up without jackknifing.
When combined, the Lock 'N' Roll hitch and coupler also create a fully articulating connection that's great for off-roading. The bearing that's built into the vehicle-end hitch allows for 360 degrees of rotation, which means that your trailer could actually roll all the way over and not take your vehicle with it. The connection also pivots side to side and up and down, making it easy to take rough trails without jarring your setup. This also allows for fast and easy disconnection, even at extreme angles.
Each Lock 'N' Roll setup requires 2 parts - a trailer end and a vehicle end. Together they create a strong, secure connection. To connect, just line up the trailer end and vehicle end together and place the outer metal tabs of the trailer-end coupler into the hooks on the vehicle-end hitch. Then fold the latching plates on the vehicle-end hitch down and secure them in place over the tabs using the included pin and clip. With the latching plates secured, the Lock 'N' Roll assembly will stay firmly connected.
When the trailer-side coupler and vehicle-side hitch are secured together, they form an articulating assembly with 3 axes of directional motion. The uniquely designed bearing on the vehicle-side hitch allows the connection to rotate a full 360 degrees. The trailer-side coupler's hinge allows the connection to pivot to the left and to the right. And when the 2 parts are joined, the tabs will roll inside of the hooks so that the entire assembly can tilt up and down.
Towing with the Lock 'N' Roll is easy, and it gives you a connection that's both flexible and secure.
Get Maximum Security Locking Pins
Get extra security for your trailer. InfiniteRule makes hitch pin locks (IR59FR - sold separately) specifically for this Lock 'N' Roll articulating hitch. You'll get two stainless steel locks: one with a 1/2" diameter pin, and one with a 5/8" diameter pin. These will replace the standard pins and clips on the driver-side and trailer-side of your coupler.
Average Customer Rating: 4.8 out of 5 stars (155 Customer Reviews)
Ideal for the rigors of off-road towing, this vehicle-side hitch works with your trailer-side Lock N Roll coupler (sold separately) to form a strong connection that is safe and secure, no matter the terrain. 3-Position adjustment channel included.the hitch is too wide, will nor work on my trailer, going to have to send it back.
Samuel
5/6/2023
Its nice paper weight. Cant use it,the hitch is too wide.
Great quality and perfect fit for my vehicle and off-road trailer.
Great product -- works amazing
Very nice strong trailer hitch. This is the second Lock N Roll hitch that I have had and both have performed as expected. I think they have become the preferred option for off-road trailer towing. Built like a tank!
High quality hitch. I don’t give it a 5 star due to high cost of product
Smooth, no play and peace of mind that your trailer will stay connected
Excellent. I really liked how the shipping information was updated with the persons name on every step of the process. Arrived quickly. The only thing I didn’t like was the fact that the receiver didn’t come with the hitch pin that attaches to my trucks receiver. I didn’t notice this when I ordered.
Customer service was amazing. Odelia took the time to help me find the right product for my Jeep. She was very friendly and patient with me reviewing the different options! I will return just because of her customer service.
The product itself was as advertised and is well made and easy to install. It was exactly as Odelia indicated. The best part is I also received it a day early, which gave me the time I needed to get it out on even though it was simple. I will shop here again!!! Thank you Odelia and etrailer!
AMAZING!!
Fast and smooth process. Happy i recomm end
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
5/20/2022
This only works with the trailer couplers that do not have the articulation on the trailer side. If your trailer coupler has this then you will need a new coupler ad well.