bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 3500 lbs
  4. 89 Inch Long
  5. 74 Inch
  6. 5 on 4-1/2
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs

Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs

Item # 35545I-EZ-89
Our Price: $295.22
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 52 lbs
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Straight trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 17-1/2" wheels. EZ-Lube spindles for simple lubrication. Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs part number 35545I-EZ-89 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (301)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Trailer Axles - 35545I-EZ-89

  • 3500 lbs
  • 89 Inch Long
  • 74 Inch
  • 5 on 4-1/2
  • Leaf Spring Suspension
  • Idler Hubs
  • No Drop or Lift
  • Dexter
  • Easy Lube Spindles

Straight trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 17-1/2" wheels. EZ-Lube spindles for simple lubrication.


  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension system to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs
    • Low ride height makes it easier to load and unload your trailer
  • Straight, EZ-Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats and spindles are welded on
  • Cast iron idler hubs are sturdy and durable
    • Bearings, races, seals, grease caps, wheel studs, lug nuts, and marine-grade wheel bearing grease included
  • Limited 2-year warranty


  • Weight capacity: 3,500 lbs
  • Hub-face-to-hub-face length: 89"
  • Spring-center-to-spring-center length: 74"
  • Flange-to-flange length: 82-5/8"
  • Hub bolt pattern: 5 on 4-1/2"
  • Tubing outer diameter: 2-3/8"
  • Spindle size: 1-1/16"
  • Brake flange configuration: 4 bolt
  • Grease cap outer diameter: 1.986"
  • Wheel stud diameter: 1/2"
  • Wheel size: 13" - 17-1/2"

Bearing, Race, and Seal Information

  • Bearings
    • Inner bearing: L68149
    • Outer bearing: L44649
  • Races
    • Inner race: L68111
    • Outer race: L44610
  • Seal: 10-19
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).

The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.

Hub Face and Spring Center Measurements on Standard Trailer Axle

Another helpful measurement to have is the flange-to-flange (C) length, which is measured from the outside of one brake flange to the outside of the one opposite. This length may be easy to obtain if you are replacing an axle, but it's important to note that this measurement is not the preferred method for determining which axle will best fit your trailer.

If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.

Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

T3584F-EZ-8974 Dexter Trailer Axle with EZ-Lube Spindles - 89" Long - 3,500 lbs

K08-248-95 Dexter Trailer Hub Assembly with Bearings, Races, and Seal for 3,500 Pound Axles - EZ Lube

L457457 Loctite Viper Lube High Performace Synthetic Lubricant - 14 oz Cartridge

Customer Satisfaction Score:

Customer Reviews

Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs - 35545I-EZ-89

Average Customer Rating:  4.8 out of 5 stars   (301 Customer Reviews)

Straight trailer axle measures 89" from hub face to hub face and 74" from spring center to spring center. Includes idler hubs - with bearings, races, and seals - for 13" to 17-1/2" wheels. EZ-Lube spindles for simple lubrication.


Axle is two inches longer than the original axle on a 1986 trailer but the tires still ended up neatly tucked under the fenders. It was shipped lightning fast, was easy enough to install and has worked flawlessly for just over 10,000 miles now. Excellent!


Maria K. went above and beyond to get me my trailer parts. Shipping was fast and I am extremely impressed with the service I received. Thank you.


Worked out great, fit perfect, hubs went together smoothly, I would recommend you guys to anyone who needs trailer repairs! Thank you


I changed the axle on my boat trailer a year ago after finding the spindles pitted and leaking grease from the rear seals. Purchased an axle from e-trailer with bearings seals and spindles and was very pleased. etrailer has been a company that I would do business again as needed. Their products have been shown to be a good quality and have arrived on time and in good condition. Have been very pleased with the experience.

Have had no problems with product. Worked out fine.
Bernard - 05/15/2019


Purchased a trailer axle with hubs. I had lost a left wheel, hub and all and was lost at a loss as to how to proceed with fixing the bent, now damaged left spindle.
Finding the complete axle and hub set up at etrailer was a God sent.
The removal of the old and installation of the new axle was easy. Slide it in, tighten up the u-blots and you're home.
A side positive was that my new axle had a pre-load bend in it and also preset for toe in. Toe In like on your car to keep it running straight down the road. ( you'll have to read they're information literature)

We haul the trailer to Chicago often. The axle is still in service and giving us no concern for worry. In fact, the trailer tracks better than it ever did using your axle setup.
Timothy - 07/15/2019


Arrived fast but was missing parts that I had to get before I could install the axel

I will have our customer service team reach out to you about those missing pieces.
-- Etrailer Expert Brooke M - 08/25/2022
I will have our customer service team reach out to you about those missing pieces.
-- Etrailer Expert Brooke M - 08/25/2022


Thank You etrailer for the quick service and delivery. This axle and idler hubs EZ lube was an easy install and exact fitment needed. 1 yr. in service and doing good.


I ordered several items for a trailer I am rebuilding. One thing i ordered was an axle with hubs. When the axle arrived there were no hubs and I was worried. But when the second box arrived there were the hubs I was expecting. Thank you your pics and shipping saved me over $200 on a single axle.


I removed and replaced my boat axle and springs including welding on the new hanger hardware before noon and was on the lake that afternoon. All the parts and pieces fit like a glove. Thanks Again Etrailer.


Axle has worked great for the value. Came on time and we'll packaged. Have not had any issues with it since installed. Thank you for delivering as promised.

3 years later the axle has bent at the spindle. Has never been overloaded. Was hoping for a longer life from this product
Aaron - 01/31/2020


EZ Lube axle, why didn't I have this last year? With a slight modification (weld new spring seats) 2"wider track, new hubs and springs the pontoon was back to the lake the same day. Now I never have to worry about repacking bearings again. Thanks etrailer


The axle I ordered was successfully installed yesterday. One issue I had was with the spring seats. My spring centers are 72 1/2. Knowing that I ordered the Spring Seats TRSS238. I cut off the seats that came with the axle as I knew I had to do but when I went to install the new seats I found the cutout diameter was too large for the axle.
For that reason I did not use the seats. Fortunately I did a neat job of cutting off the original seats so I welded those at the location I needed. They worked fine and fit very well. It would have been a problem if I did not get the seats off the axle as neat clean as I did.
Other that that issue the axle arrived in 5 days through standard shipping and hopefully will work for years to come.


I get the impression that this review is intended just for the product below, which was excellent.
I want to make sure it is said that the sales rep I dealt with over the phone was excellent. When I had questions I was not able to find on the net, Mark M had the answeres, found what I needed and the complete package was delivered promptly. Even to the extent of a tube of grease which I did not expect.
I highly recommend etrailer!


Ordered an axle and 2 trailer tires mounted on wheels. Cost is very reasonable and items were delivered promptly. This was my first time using etrailer and I am very impressed with the service and quality of items ordered. Will be a repeat customer.


Great service with knowledgeable staffs, on time delivery.
good quality and a fair price for complete axle, hubs assembly, although i received the axle, bearing hubs in good conditions the inner seals was damaged from the boxes being bounced around during shipping. Yes i would shop again at


God the product in two days from the order day. It came in perfect shape and ordering the additional mounting brackets was very easy. Item is sturdy and was quite easy to install, especially using the helpful instruction video link (there is one missing step in the video, though. It does not show the mounting of the bushing that fits next to the inner bearing on the hub, but it was still pretty easy to figure out). Great purchase and the whole axle swap took less than 30 minutes!


Regular shopper. Product was great. Reasonable shipping.
Dependable people selling dependable products at a fair price.
Need not say more. Thanks.


The parts were well protected and boxed during shipping. The parts were as described on the site. The bearings all came from China which would not have been my first choice but hopefully will be suitable. I would recommend this seller.

The center to center distance was 1 different for my trailer. I cut the brackets off and rewelded the brackets in the new location. The axle has worked well and I have had no problem. As I use the trailer only a couple of times a year the bearings that came with the axle have been fine so far.
Tony S - 06/01/2020


Ordered an axle and ez lube hubs for my boat. Shipping was very fast and everything was packaged nice. Parts fit perfect and went together the way they should. Very nice axles and hubs. I will definitely return to etrailer in the future. Top notch products and service!!!


The axle, bearings, hubs, and associated parts are, like the other parts I have purchased in the past, worked extremely well. All parts were a snug fit, and seemed to mesh well on the 17 foot homemade trailer. Thanks again etrailer for another job well done!


Replacement axle for my landscape trail er

The axle is great. Before, I had a bend in the old one that I didnt know about until I wore out a new set of tires in 400 miles :. Now things are super.
-- Etrailer Expert raymond r - 12/11/2017


Item I ordered arrived 5 days after I ordered. Everything ordered was received but unfortunately I ordered the wrong axle, my fault. Jennifer was very nice, checked if they carried the axle I actually needed...nope, and set up a return for me but at return freight price I'll see if I can sell locally. Etrailer prices are great, just be sure you order right or better yet call them.


I haven't used any of it yet but all looks OK. I expected the axles to be heavy than they are so they would be more steady and steady than they seem to be.I will find out when they are installed. service was excellent. as was delivery time.


Trashed a stock axle - had the new one from etrailer in a couple of days. Good prices, fast service, great products. My go-to source for trailer parts!


My ordered arrived in 3 days. Exactly what I needed. Replacment axel & u bolts for my 6x12 trailer. Videos were a lot of help. Very satisfied.

Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • How to Find the Overall Width of an Axle with Tires for an 8ft Trailer
    The final width (with tires) of the Dexter Trailer Axle, # 35545I-EZ-89, will depend on the wheel and tire size you intend to use. You would simply add the width of one tire (assuming your wheels have a zero offset) to the 89 inch hub face dimension of this axle to find the total width. For example, if you have 6 inch wide tires, then you would add 6 inches to 89 which gives you a total width of 95 inches. When choosing a replacement axle, it is important to choose an axle that has the...
    view full answer...
  • Determining the Correct Replacement Axle Assembly for Haul Master Trailer
    In order to recommend an axle assembly for you, I'll need some more information. First, you will need to ensure that the existing wheels and tires you are using are rated for the extra weight. Do you need a brake or an idler axle? Keep in mind that different states have different thresholds at which trailer brakes are required. It is possible that with the 2K axle, you were under that threshold, but going up to a 3500 lb axle might place you above that threshold where brakes are required....
    view full answer...
    Image 1 for
  • Looking for Replacement 3500 lb Capacity Axle for 2012 Storm Trailer
    We do offer some off-the-shelf replacement axles, but in order to provide the correct one for your needs, I'll need some specific information from you. If you'll want to re-use your existing hubs, I'll need to know the reference numbers off your inner and outer wheel bearings. If not, I'll need to know the bolt pattern of your existing wheels and I can recommend some hubs for you. I've linked you to an FAQ article that explains how to determine your bolt pattern. I'll also need to know...
    view full answer...
    Image 1 for
  • Difference Between Idler and Braking Axle
    A brake axle would have brakes, either electric or hydraulic drum or disc brakes while an idler hub would have no brakes. Many times, a tandem axle trailer will have one braking axle and one idler axle. The 3500 lb capacity # 35545I-EZ-89 axle you were looking at comes with idler hubs, but because it has brake mounting flanges, brake assemblies and hub/drums could be added at a later date if necessary. To find a replacement axle, you'd need to measure the hub face to hub face dimension...
    view full answer...
    Image 1 for
  • Replacement 3500lb Axle for 1992 Classic Bass Boat Trailer
    I'm afraid you're going to need a custom axle. Many boat trailers use what's called a V-camber axle, where the center of the axle is bent into a V shape, in order for the keel of the boat to pass over it. If that's the type of axle you currently have, that's the type of replacement you'll need to get. If your axle is more or less straight, without a v-shaped bend in it, we do not offer an axle with the spring seats in the correct place (as you've seen). My first thought was that you could...
    view full answer...
  • Tips for Selecting Axles for a Home Made Boat Trailer
    The first thing you will want to consider is the length of the trailer. A 23 foot long boat would need a longer trailer than 25 foot. You have to consider turning radius and space at the tongue for things like a winch, bow stop, and a jack as well, especially for a boat this size. A 23 foot long boat is decent in length so you might actually want to consider tandem axles instead of a single axle. Boats are heaver at the rear so a lot of the weight would be on that one axle. Two axles are...
    view full answer...
    Image 1 for Image 2 for
  • Information Needed to Choose Correct Replacement Trailer Axle
    In order to determine the correct replacement axle, I'll need the following information: -Inner and outer wheel bearing reference numbers or diameter of spindle where bearings ride. This measurement needs to be accurate to three decimal places, so using a digital caliper is the recommended way to measure. A ruler or measuring tape would be nowhere near accurate enough. -Wheel bolt pattern (see linked FAQ article) -Axle capacity -Hub face to hub face distance -Spring center to spring center...
    view full answer...
    Image 1 for
  • How to Measure an Axle to Pick Out Correct Replacement
    Axle lengths for a 6 foot wide trailer can vary. There isn't a standard length used in all 6 foot trailers so you would need to measure the length of your current one if you are looking for a replacement. You would need to measure from the hub face to hub face and then from the spring mount centers to pick out the correct axle to fit your trailer.
    view full answer...
    Image 1 for
  • How to Measure for a Replacement Trailer Axle
    To determine the axle size you will need there are some measurements needed. First, if you are replacing the axle then you can measure the one you have. Measure from the center of one spring seat to the center of the other spring seat. Then measure from hub face to hub face. I included a picture showing where to measure. In the picture the spring seat measurement is 74 inches and the hub face measurement is 89 inches. This is just an example. If the trailer does not have an axle then...
    view full answer...
    Image 1 for
  • Looking for Replacement Axle for Road King Boat Trailer
    We don't carry that particular item, but it sounds like you have a 3500 lb axle. We carry some common sized trailer axles, but to determine if any of them would work for you I'll need the following information: -Axle hub face to hub face dimension (see diagram) -Axle spring center to spring center distance (see diagram) -Inner wheel bearing reference number -Outer wheel bearing reference number The standard axles we offer have a 89 inch hub face and a 74 inch spring center dimension....
    view full answer...
    Image 1 for
  • What Measurements are Needed for Picking Out New Trailer Axles
    When picking out new axles for a trailer you need two measurements. You need to measure from hub face to hub face for the overall length and then from the center of the spring seats so that you can get an axle that will bolt right up to your trailer suspension. I attached a graphic that shows the two dimensions I mentioned on the axle part # 35545I-EZ-89 that you referenced.
    view full answer...
    Image 1 for
  • Can Trailer Axle be Measured with Wheels Installed to Pick Out Axle Replacement
    Since trailer wheels almost always have a zero offset the hub to hub face dimension you have SHOULD be 84 inches, but I'd recommend you remove the wheels on one of the axles to verify this. The other dimension you'll need is the distance from spring seat center to spring seat center.
    view full answer...
    Image 1 for
  • What Does Dexter Trailer Axle w/ Idler Hubs # 35545I-EZ-89 Weigh
    The Dexter Trailer Axle w/ Idler Hubs # 35545I-EZ-89 that you referenced weighs 52 lbs. It has a 3,500 lb capacity as well.
    view full answer...
  • Which Way Should Bow of Trailer Axle Face When Installed on Trailer
    Trailer axles are supposed to have a bow in them that faces down towards the ground. With the weight of the trailer normally this flattens out slightly and gives you the correct camber you need. Whoever flipped your axle should have used an over under kit like the # K71-384-00 to move the springs to the other side of the axle while still allowing it to face the right direction. Flipping them like they did is why your tires are wearing like you mentioned. All of the axles we have like...
    view full answer...
  • How To Measure A Trailer Axle To Find the Diameter
    I don't have any visual to show axle diameter unfortunately but all you need to do is take a tape measure and measure from the very bottom of the axle tube to the very top of the axle tube as that will then give you the diameter which can be used to determine weight capacity using the chart below. - 1,000-lb - 2,000-lb Axles: 1-1/2 inch - 1-3/4 inch diameter - 3,500-lb Axles: 2-3/8 inch diameter - 5,200-lb - 7,200-lb Axles: 3 inch diameter - 8,000-lb Axles: 3-1/2 inch diameter - 9,000-lb...
    view full answer...
  • Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
    When selecting the correct replacement axle for a utility trailer you will need to know both the hub face (wheel center) and spring center measurements. For example, if your current hub face measurement is 88" and you replace this with an axle that has an 89" hub face measurement then the wheel/tire will stick out 1/2" more on each side. That said, this would not have any negative affect on the trailer so long as all axles were the same. In regards to spring center spacing, this is not...
    view full answer...
  • Troubleshooting Parts Needed for Eagle Scout Project Trailer Refurbishing
    I am happy to help you get the parts you need for the Eagle Scout project to serve your city. There are many parts that go into a trailer, so why don't we start with a photo of the project if you can supply it and give me as much information as you can. Here are places to start: What is the current axle length from hub face to hub face and spring seat to spring seat (on center)? See attached photo. What does it say on the side of the current tires? All the numbers mean something,...
    view full answer...
    Image 1 for
  • How to Determine Trailer Axle Hub Face to Hub Face Dimension
    To determine hub face to hub face dimensions on your trailer axle you'll want to put the trailer on jack stands so that you can take the wheels off and then measure from one hub face to the other hub face.
    view full answer...
    Image 1 for
  • Where to Measure Axle to Pick Out Replacement for Trailer
    You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You will need to measure from hub face to hub face and then from the spring seat centers. You will also need to know what bolt pattern you have on your current hubs. I attached a help article on how to determine this as well. I also attached a link to a page with all of the axles we carry.
    view full answer...
    Image 1 for
  • Could Dexter Axle part # 35545I-EZ-89 Be Used On a Boat Trailer
    If the dimensions of the axle match what your boat needs then yes, the # 35545I-EZ-89 would fit and work well. This axle has a spring seat to seat dimension of 74 inches and a distance of 89 inches from hub face to hub face. If those dimensions match (with the seats being the most important) the axle would fit and work well. If you need an axle made longer or shorter though you'd have to find a local trailer shop who can order you in a custom axle as we don't carry an extensive line of...
    view full answer...
    Image 1 for
  • Determining Axle Length for 6 Foot 6 Inch Wide Trailer
    The correct length for the axle on your 6 foot 6 inch wide trailer will depend on a couple of items. When determining the axle length, you will want to take into account the width of the tires/wheels you intend to use, along with the spindle length. With this in mind, you will want to start with the overall width of your trailer and its fenders/wheel wells, then subtract the widths of your two chosen wheels and the lengths of the two spindles to determine the axle tube length. If you...
    view full answer...
  • Troubleshooting Odd Tire Wear on Passenger Tires for 1988 Travel Trailer
    There are a variety of possible reasons that the passenger side tires are wearing the way they are on your 1988 Travel Trailer. Starting with the simple fixes, I recommend making sure you are not overloading the axle and tires on your trailer. Check to ensure that the combined load rating for your tires meets or exceeds the loaded weight of your trailer. Do the same thing for the trailer's axle capacity. Also verify that all of your trailer tires are always inflated to their maximum psi...
    view full answer...
  • How to Find Replacement Axle for Boat Trailer
    The best way for finding the correct replacement axle for your boat trailer is to take a couple of measurements on your existing unit. You will want to determine both the hub face to hub face dimension, along with the spring center to spring center dimension on your current axle. I have included an image that clarifies these measurements. Once you have these measurements, you will also want to make sure you find a replacement that matches the capacity of your current axle. The axle capacity...
    view full answer...
    Image 1 for
  • Proper Spacing Between the Hub Face and Spring Center Locations for 7,000-lb Triple Axles
    When you replace the axles on a trailer you will look at the (A) hub-face-to-hub-face and the (B) spring-center-to-spring-center measurements and choose an axle that has the same measurements that your current axle does. Since you are wanting to add new axles to a trailer bed that has never had axles installed before you will need to make sure that the hub face is not too far away from the spring centers (as you mentioned). Your can adjust the spring seats on your 7,000-lb axles by having...
    view full answer...
    Image 1 for

< Previous
123. . .6

Do you have a question about this Trailer Axle?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Written by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.