bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 3 Inch
  6. Rise - 2 Inch
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K

Item # 3592
Our Price: $16.36
You Save: 66%
Trailer Hitch Ball Mount
Orders above $50 qualify for Free Shipping
Shipping Weight: 6 lbs
In Stock
Draw-Tite 3/4 Inch Ball Hole Diameter Trailer Hitch Ball Mount - 3592
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection. Lowest Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K part number 3592 can be ordered online at or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (1889)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch Ball Mount - 3592

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 3 Inch
  • Rise - 2 Inch
  • No Ball
  • Class I
  • 2000 lbs GTW
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.


  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class I and Class II compatible
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Length: 9-3/4" from center of hitch pin hole to center of ball hole
    • 6-1/2" From center of pin hole to closest edge of ball mount platform
  • Rise: 2-1/8" from top of inside of hitch opening
  • Drop: 2-3/4" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty

How to Measure Drop on Standard Ball Mount

3592 Draw-Tite Ball Mount - 2-1/8" Rise or 2-3/4" Drop - 2,000 lbs

Replaces 6806

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 9-3/4" Long - 2K - 3592

Average Customer Rating:  4.8 out of 5 stars   (1888 Customer Reviews)

Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.


I got a hitch for my Honda accord it was extremely easy to install took less time than they estimate after I installed it I bought a trailer and have hauled various things already with no problem I would recommend e trailer to anyone


This is a great product. I really appreciate the quality. This was also a car I was having difficulty finding a trailer hitch for. So thanks again for a good product.


I installed the trailer wiring and a friend helped install the hitch. Etrailer website is excellent. I got the right items on time and the fit is better than my wife’s dealer installed hitch. Videos on the etrailer site are clear and correct. One caveat, don’t try installing the hitch without at least one other person and having a way to lift the car(we used ramps) is a great help. The only possible way etrailer could be any more helpful is if they could recruit some local shops that would be willing to do the installation. I especially like having my wiring in the passenger compartment when not in use. It keeps it out of the Salt here in the northeast.


I haven’t installed this yet on my 1994 mustang gt. The quality looks great as far as wields and powder coating. Price was great as well. I had a great experience calling and having all my questions answered. The best part was seeing the hitch installed on a mustang similar to mine to see the fit and finish. That is what really drew me into this purchase


Good and sturdy product


Rcvd my hitch today (one day earlier than predicted by etrailer when I ordered...well done!). Everything was received as expected/requested.
Crawled under the car and started installation immediately. Piece of cake really; although some people would struggle with the tight space, 13 year old car, and need to clean threads, and remove caulk/undercoat in order to achieve "hole alignment".
Hyundai also did a great job by having pre-threaded welded nuts in place.
So far.... a great product received in time to use this weekend (as was my plan).

Great job and great product by etrailer.
Also, the website was easy to use and the videos quite helpful.
I will be back!
Thank you,
2008 Hyundai Sonata


Achieved the pro height and length for my boat trailer.


I am pleased with the tow hitch I received to use with my drawtite receiver hitch. I have it primarily as a way to move my Demco dolly if I have to , and it is fine for that light duty use. It was shipped well packed and was delivered with the receiver hitch. I am very satisfied with the drawtite products and the service provided by etrailer.

Yes, everything is working perfectly.
Donald - 01/26/2018


Fit was perfect, installation very easy for both the trailer hitch and wire harness (simple followed instructions). It is used for light duty, pulling a kayak and trailer with a total weight less than 600 pounds. Also is used with a bike rack. It works great for my use. On the trailer the ground for lights were run all the way to the the wiring harness, in-other words, the lights were NOT grounded to the trailer (to much problem with improper grounding).


This is my second hitch order from etrailer. Nice hardware - easy to install. The tutorials & video instructions are quite good too.

A year later everything from etrailer works perfectly.
Mark - 04/25/2016


Good, heavy duty parts!


Item arrived on time. Product as specif ied.


This product works great for my 2004 Nissan Altima. I would purchase from again.

After a year I have had no problems and the quality is still excellent. I would recommend to anyone looking for trailer equipment.
Jim W - 06/17/2018


Well a draw bar is a draw bar but Etrailer delivered mine in two days at half the price of my local store who claimed it wasn't possible to get a 9" drawbar with a 2 1/8" height, which is what I need for my motorcycle trailer.
I also bought my Draw Tite hitch for my Mazda3 at Etrailer and that arrived in less than a week and fit the car perfectly. Excellent hardware as well.


Being completely clueless and brand new to the towing/trailer world, I ordered mismatched parts. Roger R immediately reached out to me to ensure I had what I needed to properly install my hitch. I'm completely impressed with the customer service and affordability of and will recommend it to anyone... now to just get the parts installed and go get on the water!!


Everything came as described and packed well. I did not even have to lower the exhaust. Fit right in and with only 3 attachment points, I had the hitch on in a little over 30 minutes! I have towed several times with it so far and seems to be doing well. Thanks!


The instructions with the Accord say that "Hitch should only be used in the RISE position" with no further description, simple enough to search, but would have been nice for them to provide a picture or say that the rise position is basically where the hitch ball attachment angles upward and the ball sits on top of that... the hitch ball mount is intuitively used in the drop or angled downward position most of the time.

Rise postion:


Drop position:


(their picture for the product is in the drop position, rise position is flipping it upside down.)


I ordered two hitches and harnesses for a Mazda 3 and Honda CRV and while the products were everything they were supposed to be I was very impressed with the two customer service reps I dealt with. Very polite and efficient. This company has it together.


I like this bar because it is longer and projects a little farther out than the short bars. On my car it needs a longer length to clear the rear bumper cover. Well made and no rust.


I ordered products online. I had trouble with the order it was my fault pushing buttons. I called them and spike to someone and she told the order and said it had went threw was shipped ups easy tracking the order. It came 1 day earlier than etrailer said it would. Ups deliver to my front door....everything I ordered was in a well packed box. Product was clean and everything to install......i haven't installed it yet but planning on the next month... I will updated on the fit and provide finished install.... I am very pleased and will order and would recommend them from the professional services they have provided.... Thanks


Prompt shipping, easy install, good follow up to purchase. All is well with this hitch. Thanks.

Great company! A company that touches base a year after purchase is impressive! Thanks
The V - 10/03/2017


Works great. No problems with this thing. You will need to buy something to stop the rattle. etrailer sells several solutions for this though.


This is a very heavy and solid drawbar. Very high quality product.


I made a canoe trailer that tows behind the wife's hi-bred. Hitch works great.


This is the stinger needed for the 2013-2016 Dodge Dart if you plan on using it to pull a trailer. The car sits quite low from the factory so the stinger is installed upside down and still will drag on the ground when pulling out of a sloped driveway.

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

  • Can Class I Hitch Vehicle Tow Trailer Designed for Motorcycle
    As long as you have the correct trailer wiring on the tow vehicle to match what the trailer needs and the correct hitch ball size and drop there's no reason you couldn't tow a small trailer designed for a motorcycle with a vehicle that has a Class I hitch.
    view full answer...
    Image 1 for
  • Could a 2014 Subaru Outback Tow a 5x8 Trailer Loaded with Mulch
    You will first need to determine what the towing capacity is for your 2014 Subaru Outback and then determine how much your trailer will weigh when it is loaded at its max. I attached and FAQ article on determining tongue weight that should be very helpful. If you determine that your trailer weighs less than the max capacities listed for your vehicle then you would have no problem using your vehicle to tow your trailer. You will also want to make sure that your trailer is being towed as...
    view full answer...
  • Will Using 2 Inch Trailer Ball on 3592 Ball Mount Affect Trailer's Ability to Turn
    You most certainly can use a 2 inch ball like # 19258 with the # 3592 ball mount without impacting the ability of the coupler to rotate on the ball especially when you consider that 1-1/4 inch ball mounts are typically used in the rise position. I've linked to some description/demonstration videos for you.
    view full answer...
  • Ball Mount for 1997 Grand Cherokee
    The ball mount needed will depend on the size of the receiver opening in your hitch, 1-1/4 or 2 inch. The class II ballmount, part # 3592 that you looked at will fit your vehicle if it has the the 1-1/4 inch receiver. If you have the 2 inch receiver, part # 2923 would be a great choice.
    view full answer...
  • What Ball Mount Is Needed For The Draw-Tite Class I Trailer Hitch, # 24792, On A 2008 Honda CR-V
    On the Draw-Tite Class I Trailer Hitch, # 24792, for the 2008 Honda CR-V, you will need # 3592. On a Class I trailer hitch you can only use the ball mount that is recommended for the hitch, because it will have the correct rise or drop needed to tow a trailer properly for that particular vehicle. Draw-Tite Ball Mount, # 3592, has to be used only in the rise position. The rise on this ball mount is 2-1/8 inches. The hitch height on the # 24792 hitch on your vehicle is 12-7/8 inches and...
    view full answer...
  • Why Does The Ball Mount Not Slide All The Way In My Draw-Tite Class I 1-1/4 Inch Hitch # 24787
    The Draw-Tite Class I 1-1/4 Inch Hitch, part # 24787, is a Class I hitch. All of the hitches available for your 2007 Honda Accord are Class I hitches. The Class I hitch has a 2,000 lbs. towing capacity and a 200 lbs. tongue weight capacity. Sounds like the ball mount you are using is a Class II ball mount. The Class II ball mount is rated for 3,500 lbs. towing capacity and 350 lbs. tongue weight. It is designed to NOT fit a Class I hitch to keep somebody from overloading the Class I hitch....
    view full answer...
  • Why do Some Ball Mounts Have a Drop and Rise and Others Only have a Rise
    Some ball mounts, generally Class I and Class II ball mounts, are designed by the manufacturer for use in the rise position only. These ball mount designs are intended for use with vehicles that require a rise only and would be too low to the ground to ever need a lower ball mount. Ball mounts listed with a rise only should not be used in the lowered position because the manufacturer has not tested them for use in that position. Some Class I and Class II ball mounts, like item # 3592,...
    view full answer...
  • Which is Correct Ball Mount for 1997 Chevrolet Lumina w/ Draw-Tite Trailer Hitch # 24628
    The recommended ball mount to use on a 1997 Chevrolet Lumina with the Draw-Tite Trailer Hitch 24628 (DISCONGTINUED) is the Draw-Tite Ball Mount, part # 3592. The ball mount that you referenced, part # 3594 has too much of a rise and is not recommended by Draw-Tite to be used on the Chevrolet Lumina. With Class I and II hitches, the ball mount recommended by the hitch manufacturer must be used, not doing so will void the hitch warranty. I have linked an FAQ on hitch ball mounts.
    view full answer...
  • Class II Ball Mounts and Bike Racks Will Not Fit a Class I Trailer Hitch on a Mazda 5
    The trailer hitch you have, # 24874, is a Class I trailer hitch. The accessories you are trying to use must be Class II accessories and will not fit. That tab inside the shank is a safety stop. It is there to prevent you from overloading the Class I hitch which could damage it or the vehicle. We started pointing this out on all of the Class I trailer hitch product pages, see picture, after numerous comments from customers having the same problem. The correct ball mount for this hitch and...
    view full answer...
    Image 1 for
  • Ball Mount with at Least 3 Inches of Drop that is Longer Than 9-3/8 Inches Long for Old Rat Trike
    Ball mount # 36063 does have to be used in the rise position only. How about ball mount # 3592. It has a drop of 2-3/4 inches and measures 9-3/4 inches from the center of the hitch pin hole to the center of the ball hole. It is designed for Class I or II hitches. This is going to be the best option out of the ball mounts we carry.
    view full answer...
  • Trailer Hitch that Fits 2009 Ford Fusion
    We have the Draw Tite trailer hitch # 24775 for the 2009 Ford Fusion that has a towing capacity of 2,000 lbs. This capacity though is independent of the capacity of your vehicle. I tried looking up the capacity for it online and most places say it wasn't listed or it's not rated for any towing. So I really wouldn't feel comfortable telling you that your vehicle could tow a 1,500 lb trailer. Especialy on the hills you describe. If you really wanted to do it though I would recommend checking...
    view full answer...
  • Recommended Trailer Hitch and Wiring for 2005 Honda Accord
    I did some research on both your 2013 Hyundai Elantra Sedan and 2005 Honda Accord. You are correct that towing with your older 2005 Accord will be the better option, primarily because of its V6 engine. According to the online owner's manual for your 2013 Hyundai Elantra, this vehicle is actually not designed to tow any size trailer and Hyundai does not recommend doing this. Your 2005 Accord, on the other hand, is able to tow a light trailer up to 1,000 pounds. Since you will be very...
    view full answer...
  • Availability of Longer Ball Mount with 3/4 inch Ball Hole Diameter and Around 2 inches Rise
    The closest ball mount we have to the dimensions you mentioned is the part # C45016 which has a 2-5/8 inch rise, a 3/4 inch diameter ball hole, and measures 9-3/8 inches from the hitch pin hole to the ball hole.
    view full answer...
  • How to Find a Ball Mount with the Right Rise or Drop to Tow a Trailer Level with an ATV
    I will be happy to help. To determine the right amount of drop you will need the first step is to take a couple of measurements. Park the ATV and the trailer on level ground. Measure from the ground to the top of the receiver opening on the ATV. Then, level the trailer (as if you were towing it level) and measure from the ground to the bottom of the coupler. The difference is the amount of drop you will need (unless the trailer is higher then the difference would be the amount of rise...
    view full answer...
  • Replacement Drawbar Recommendation for a 2005 Honda CR-V with a Draw-Tite # 24772
    I went out into our warehouse and measured the distance from the center of the pin hole to the butt end of the shank on the Sportframe Drawbar 2-1/8 inch Rise or 2-3/4 inch Drop 2000# Kit, part # 3592, and found that it is 1-9/16 inches. I then pulled a Sportframe Drawbar 2-1/8 inch Rise or 2-3/4 inch Drop 2000# Kit, part # 3593, and found that it also shares the same measurement of 1-9/16 inches from center of the pin hole to the butt end of the shank. Since the original drawbar that...
    view full answer...
    Image 1 for
  • Recommendation For Trailer Hitch For 2002 Honda Accord 2-Door Coupe
    Yes, I have a hitch for you! I recommend the Draw-Tite Sportframe Trailer Hitch Receiver, Item # 24791, that is a confirmed fit for your 2002 Honda Accord Coupe. It is a Class I, 1-1/4 Inch light duty hitch that lets you tow a trailer, carry a bike rack, or carry a cargo carrier. It has a maximum capacity of 2,000-lbs and a maximum tongue weight of 200-lbs. It bolts on and is very durable. This hitch is a confirmed fit but keep in mind that your Honda has a maximum towing capacity...
    view full answer...
  • Drawbar and 50mm Trailer Ball for Draw-Tite 24747 Class I Hitch on 2008 Ford Mustang
    I'm not exactly sure what you're meaning by 'dragball tow bar', but I'm assuming you're meaning a drawbar like part # 3592. If that's the case, it is indeed possible to use a drawbar and a 50mm trailer ball like # 63912 with the Draw-Tite Class I hitch, part # 24747 on your 2008 Ford Mustang. This being said, according to the owner's manual the 2008 Mustang is capable of towing a maximum trailer weight of 1000 lbs. The # 24747 hitch itself has a 2000 lb capacity, but you'll need to abide...
    view full answer...
  • Can a 2008 Ford Fusion Accept a Class II Hitch to Allow Use of Wheelchair Carrier
    All of the trailer hitches offered for your 2008 Ford Fusion (a great car - I used to own one until an East Coast blizzard took her away from me) are light-duty Class I types with a 200-lb tongue weight capacity. These do not have the capacity to transport a wheelchair and carrier and no Class II hitches are available for the vehicle. Your option then is to use a small trailer (which will work with one of these Class I hitches). Local outdoor and farm stores often carry small utility trailers...
    view full answer...
  • Can a Class II Ball Mount be Used with a Class I Trailer Hitch on a 2006 Mitsubishi Eclipse GT
    With a Class I trailer hitch on your 2006 Mitsubishi Eclipse, you should only use the ball mount that is recommended for use with the trailer hitch. Another problem is that the ball mount that you have referenced is a Class II accessory. Class II items are designed so that they will not fit in a Class I trailer hitch. You could use Sportframe Drawbar, # 3592, which will give you a 2-1/8 inch rise or # C45016, which will give you a 2-5/8 inch rise.
    view full answer...
  • Draw-Tite Ball Mount # 3592 Recommendation for a 2007 Honda Accord
    Yes, the Draw-Tite Hitch, part # 24787, fit your 2007 Honda Accord. A Class II drawbar will not fit into a Class I hitch, the reason for this is because Class I hitches have a notch on them that only Class I accessories are capable of accommodating. The reason for this is to prevent the Class I hitch from being overloaded by Class II hitches. I attached an FAQ article on ball mounts below for you to check out also. With this hitch you would want to get a Draw-Tite Ball Mount, part # 3592....
    view full answer...
  • Recommend Trailer Hitch for 2010 Ford Mustang V6 with Boss Rear Bumper
    For your 2010 Mustang V6, you will need the Draw-Tite Trailer Hitch, part # 24840. The hitch will bolt up to the frame of your Mustang, but since you have a Boss rear bumper, additional trimming of the bumper fascia may be required. The Draw-Tite Hitch # 24840 is a Class I 1-1/4 inch hitch. You will want to make sure not to exceed the towing and tongue weight capacity of the hitch or vehicle as stated in the vehicle owners manual. If you will be using the hitch for hitch mounted accessories...
    view full answer...
  • Can A 2002 Saturn SC3 Coupe Tow A Small Trailer
    You will need to check your owner's manual or with your dealership and see if your 2002 Saturn SC3 coupe is rated for towing a trailer. We do have hitch es that are designed to fit your vehicle but if the car is not rated to tow, they can be used for accessories only, like bike carriers or cargo carriers. If you find that you can tow with your SC3, the hitch I recommend is the Draw-Tite Trailer Hitch, part # 24620. This is a Class l hitch that has a 1-1/4 inch receiver opening, and...
    view full answer...
  • Ball Mount with 2 Inch Rise Longer than 7 Inches to Tow Trailer Level with 2001 Subaru Forester
    It sounds like there are a couple of things going on here. First, you need a ball mount with a 2 inch rise. But then it also sounds like you need a ball mount that is longer than 7 inches. The other issue is that on Class I and II hitches you are supposed to use the ball mount recommended by the hitch manufacturer or it could void the hitch warranty. Ball mount # 3592 is going to be the best bet for the height and length requirements. It has a 2-1/8 inch rise and measures 9-3/4 inches...
    view full answer...
  • Fit of Trailer Hitch, Installation of Hopkins Vehicle Wiring Harness for 2000 Honda Accord Coupe
    The trailer hitches we offer for the 2000 Honda Accord are confirmed to fit all models of the Accord, so they will work well on your coupe. The Draw-Tite Class I Sport Frame Receiver Hitch # 24791 that you referenced will work well on your Accord Coupe. I highly recommend this hitch because, unlike the Curt hitch option, Draw-Tite's hitch warranty does not require a stabilization strap to be used when carrying non-trailer loads such as bike racks or cargo carriers. The Draw-Tite # 24791...
    view full answer...

< Previous
123. . .6

Do you have a question about this Trailer Hitch Ball Mount?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeff D
Installed by:
Jeff D
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.