bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 3 Inch
  6. Rise - 2 Inch
Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K

Item # 3593
Our Price: $32.33
You Save: 28%
Trailer Hitch Ball Mount
Shipping Weight: 5 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection. Great Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K part number 3593 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (2110)
  • Q & A (0)
  • Photos

Draw-Tite Trailer Hitch Ball Mount - 3593

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 3 Inch
  • Rise - 2 Inch
  • No Ball
  • 2000 lbs GTW
  • Class I
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.


  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Sturdy steel construction with a solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class I and Class II compatible
  • Gross towing weight: 2,000 lbs
  • Tongue weight: 200 lbs
  • Length: 6-5/8" From center of hitch pin hole to center of ball hole
  • Rise: 2-1/8" from top of inside of hitch opening
  • Drop: 2-3/4" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

3593 Draw-Tite Ball Mount 2-1/8" Rise or 2-3/4" Drop - 2,000 lbs

Replaces 6803

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitch - 2-1/8" Rise, 2-3/4" Drop - 6-5/8" Long - 2K - 3593

Average Customer Rating:  4.8 out of 5 stars   (2110 Customer Reviews)

Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.


Excellent customer service & support! Bought for my 2013 Honda Fit and plan to trailer my Yamaha Tenere motorcycle around North America! Very happy with hitch.


Typical quality of...VERY good!! Lol. I've pulled my small mc trailer numerous times with this hitch and NO issues!!!

Don W.


Some opinion even after a year of yse!!! Very well made and heavy duty!!!


The drop configuration is practically unusable with my Chevy Volt having low ground clearance. But works well with the rise, though i could use another inch for the trailer i have.. I use both 1-7/8" and 2" ball with this drawbar and no issues in 10 or so uses.


Worked great to keep the uhaul trailer I towed level even with lowering springs on my 2017 Mazda 3 Touring


This part came with the trailer hitch I purchased.

It was very easy to transfer the ball from my 2" hitch and voila I am now ready to haul my trailer.

Jim F.


am extremely satisfied with the products I purchased. I use theTow Hitch almost daily for my bicycle rack and a trailer I have to tow. The installation was a quick and easy. I have recommended your website to about 20-25 people over the past year. Hopefully you received some business from my recommendations. Thanks for following up. Not all companies take the time.


I did not give a 5-star because although it stated when I purchased the hitch set up it would accommodate to e-bikes, it was too short. I had to have a longer bar special made to fit our two e-bikes.


Easy to use and haven't had any trouble towing my small trailer with motorcycle on board. Def recommend.


Not very happy with getting a used or returned ball mount from, should not have any rust or dents when I buy a new one. Sending a mail to customer service for a RA#, hopefully they will correct this problem. The wiring harness I order was the other item I ordered and it was in good shape. My experience with them has been up to this point excellent.


Fits perfectly to a VW ID4. It is essentially the only drawbar I could find that fits the ID4 specification of being up to 7 inch long and not more than 2 inch rise. In raised position it is very close to the bumper but does not touch.

The hitch pin was not included in the package. It was not an issue for me because I already had a pin. Also, I think that the ID4 require a bit longer pin than the one shown in the picture.


I was completely satisfied and very impressed thoughout my first experience with The website provided exactly the educational material I need to correctly order the products. My order was unexpectedly upgraded for faster shipment, at no cost. The only glitch was the pin and clip were missing. After calling customer service they gave me several options. I bought the pin locally and promptly credit my account for my cost. I'm glad I found and heartily recommend them!


If it was not for etrailer, I would not have the hitch installed in a expedient manner. [towing company] could not come through with a installation or a hitch. Very grateful etrailer and my hitch in stock


Great drawbar!! Very well made.


Pretty good..


Sending you a pic of my lights I got from you and the hitch with the full wiring system. All works great. Thank you so much. Now it's time to go riding!!


You’re gonna love this! I put the hitch on my Corvette to haul a small luggage trailer on long trips. The hitch works great!


Fantastic, Carol. Everything went together beautifully. Just need to register the trailer, get a little practice driving with it and start hauling.


I bought this as part of the tow package for a Honda Fit. It has the rise I needed to match my trailer. I couldn't be happier with the e-trailer experience.


Nice quality because the shank that goes into the hitch is solid but hallow like the ones from other sources.


Recently purchased this item along with a 2" ball and a spare pin. Quality and fit for all items is "excellent". I have purchased from e-trailer for years and have always been pleased with product quality and the tech support has also been outstanding. Due to an incident during shipping of this order I have learned that the Customer Support from etrailer is also outstanding! I had shipping confirmation with tracking info for replacement items in less than a day from contacting them!


Great service


Instructions were very clear and the quality of the product is as good as advertised. It bolted right up with minimal effort, and that is coming from someone who has had recent health issues and has less than full mobility.


Works exactly as expected.


Exactly as described, fit perfect. Seen here with ball and receiver.


I needed a hitch receiver for a 2016 kia soul i am using for the time being to pull a small trailer and for my bike rack. My 15 year old son helped me install it no problem and it works great. Saved me a bunch of money!


An extremely easy to use hitch with easy on-off for anyone to use.

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

  • Install 3593 draw bar in the up or down position on a 2005 Honda Element
    The orientation your Class I Drawbar, part 3593 will depend on the height of the trailer coupler. With the trailer level, measure from the coupler down to the ground. This is the approximate height you'll need the trailer ball to be. You'll want to install the drawbar so that the trailer ball is as close to this height as possible. Due to the fairly low bumper height of the Element, you'll probably need to install it in the 'up' position.
    view full answer...
  • Why Can't Class II Accessories Be Used with Class I Trailer Hitch Receiver
    Both Class I and Class II trailer hitches have the same 1-1/4 inch receiever opening, however a Class II hitch will have higher towing and tongue weight capacities. The primary issue with using a Class II accessory in a Class I hitch is that many Class I hitch receivers actually have a built-in tab/stopper inside the receiver that physically prevent a Class II accessory from fitting. Trailer hitch manufacturers do this in order to keep a Class I hitch from being overloaded, since a Class...
    view full answer...
  • Are Ball Mounts Sold Separately from Trailer Hitches
    Sounds like you are looking for a ball mount. We carry quite a few of them actually. But when you buy one you want to go with one that allows the trailer to be towed as level as possible. I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will...
    view full answer...
  • How to Pick Out the Correct Ball Mount for 2015 Honda Civic
    The best way to determine which amount of rise or drop you need from a ball mount (in order to keep your hitched trailer level for the best handling) is to measure as outlined in the linked article. Since the same wheel size could have more than one tire size on it that does not give you the best method for choosing a ball mount. For the Class I hitch on your 2015 Honda Civic you can refer to the linked page to see all ball mounts.
    view full answer...
  • Is There a Standard Required Clearance for Ball Mount to Vehicle Bumper
    There really isn't a specific range for what you are asking about. You basically want the trailer to be able to move as you turn without interfering with the vehicle bumper. Normally that's not an issue and what people end up more concerned with is the correct rise drop. Having the hitch opening recessed 3 inches is pretty standard for towing applications. Ball mounts typically stick out around 9 inches or so which gives the trailer plenty of clearance to pivot around.
    view full answer...
  • Dimensions of the Shank of the Draw-Tite Drawbar for 1-1/4" Hitch # 3593
    The shank of the Draw-Tite Drawbar for 1-1/4" Hitch # 3593 measures 1-1/4 inches tall by 1-1/4 inches wide.
    view full answer...
    Image 1 for
  • How to Pick Out the Correct Ball Mount
    I attached an FAQ that details how to pick out the correct ball mount. Picking out the correct ball mount will allow your trailer to sit as level as possible. Basically you will first measure the height from the ground to the top of the receiver opening on the hitch while on level ground. Next, you will measure the coupler height from the ground to the bottom of the trailer coupler when the trailer is on level ground. Next, you will need to compute the difference. If the hitch height is...
    view full answer...
  • What Draw Bar Fits Draw-Tite Class I Hitch Part # 24812
    The Draw-Tite Class I hitch you were looking at, part # 24812 uses a 1-1/4 inch receiver. A class I hitch usually has a stop welded into the receiver tube or a detent punched into it to prevent a class II accessory from being used. If the draw bars you have were intended to be used in a class I hitch, they will work. Keep in mind, Draw-Tite recommends only using the part # 3593 draw bar. If the draw bars that you have measure any longer than 1-1/2 inches from the center of the pin hole...
    view full answer...
  • How Does The Peterson Great White LED Trailer Light 359-3 Get Mounted?
    The Peterson Great White LED Trailer Interior Cove Light - 1000 Lumens - 18" Long - 12V/24V # 359-3 you were looking at has tabs on each end of the light for screwing them vertically or horizontally to the walls or ceiling of your 16' Cargo trailer. The hardware is not included so you will need to source the screws from a local hardware store. There is not a way to link them if they are not bright enough with the exception of running both of them directly to the battery in the trailer...
    view full answer...
  • Recommend Ball Mount For Towing Light Trailer With 2014 Prius V With Draw-Tite Hitch 24967
    We have not had a chance to install the Class I Draw-Tite Sportframe Trailer Hitch Receiver part # 24967 but we were able to install the Draw-Tite on a 2016. The ground clearance with the hitch installed on the 2016 was 12-1/4" which will most likely be the same on your 2014 Prius V give or take if there is a tire size variance. Please keep in mind the Class I hitch is only capable of towing 200 lbs tongue weight. You will need a ball mount with at least a 1-3/4" rise if you install the...
    view full answer...
  • Trailer is not Level When Towing with Recommended Drawbar
    The instructions (see link below) state that the drawbar must be used in the rise position only, for your Pontiac Vibe. Drawbar 3593 has a rise of 2-1/8 inches, and only the drawbar recommended for a Class I hitch should be used. The manufacturer tests for crash safety on Class I and Class II hitches and their recommendation should be followed. If your drawbar is in the correct position and the trailer is still not level you may need to haul that particular trailer with another vehicle....
    view full answer...
  • Towing a Trailer that Fits a 2 Inch Hitch Ball with ATV that has a 1-1/4 Inch Trailer Hitch Receiver
    Unfortunately, we do not have any hitch expanders from a 1-1/4 inch hitch receiver to a 2 inch receiver that are able to be used for towing. Although, I'm a little confused. Your ATV has a 1-1/4 inch receiver and the trailer fits a 2 inch hitch ball. With this being the case you can use a Class I ball mount like # 3593 with a 2 inch hitch ball like # 19258 to tow the trailer with your ATV.
    view full answer...
  • Suggestions For Carrying Trash Can 1/4 Mile With 2014 Toyota Camry
    Depending on the style of trash can you have, I do have an option for you. If your trash can has the metal bar on the front of it then this will work, if not it may be possible to add a sturdy attachment point. First you would need to install the Draw-Tite Trailer Hitch Receiver # 36540 on your 2014 Toyota Camry. Next using a ball mount # 3593 and have a local fabricator add tabs to go around the metal bar and slightly lift it off the ground. Similar to the included picture a customer...
    view full answer...
    Image 1 for
  • My Draw Bar Will Not Fit All the Way Inside My Draw-Tite Hitch 24812 on my Pontiac Vibe
    The stop inside the hitch is not to force customers to purchase certain brand products, but to ensure that a Class II draw bar is not inserted into a Class I hitch. The Draw-Tite hitch you have, part # 24812, is a Class I hitch so if the welded stop inside is preventing the draw bar from going all the way in, you have a Class II drawbar. The recommended draw bar for this particular hitch is part # 3593. This draw bar will fit your hitch and will be at the proper height for trailers that...
    view full answer...
  • The Correct Drawbar for a 2003 Volkswagen Jetta with a Class I Hitch
    For your 2003 VW Jetta, the drawbar, # 36051, will not work because Class II accessories are designed with a feature that keeps them from being used in a lower class hitch. So you will need to use the Sportframe Drawbar, # 3593, instead. I pulled all the recommended hitches for your vehicle and this is the drawbar that is recommended as the proper fit for those hitches. There is not, necessarily, a recommended length. The limiting factor is the gross trailer weight and tongue weight capacity....
    view full answer...
  • What is the Correct 1-7/8 Inch Diameter Ball for Draw-Tite Ball Mount # 3593
    We have many different 1-7/8 inch diameter balls. The recommended 1-7/8 inch ball for ball mount # 3593 is # 19256. Any ball that has a 3/4 inch diameter shank will fit.
    view full answer...
  • Is Drawbar Required for Draw-Tite Sportframe Trailer Hitch on 2017 Toyota Prius
    The Draw-Tite Class I Sport Frame Receiver Hitch # 24966 referenced in your question is confirmed to fit your 2017 Toyota Prius. A drawbar like the Draw-Tite # 3593, which is also referred to as a ball mount, is used for holding a hitch ball that is needed for towing. This is not a required component for the trailer hitch, and it can be obtained separately if one is needed. If you intend to use the Draw-Tite Trailer Hitch for non-trailer loads such as bike racks and cargo carriers, a...
    view full answer...
  • Should Ball Mount of Draw Tite Hitch part # 24913 be In Rise or Drop Position
    The ball mount that comes with the Draw Tite hitch part # 24913 for your 2004 Toyota Corolla must be used in the rise position only. The hitch sits so close to the ground that if the ball mount was in the drop position the trailer's nose would be sitting way too far down to be level. The ball mount replacement would be the part # 3593.
    view full answer...
  • Distance from Center of Hitch Pin Hole to Tab in Shank on Draw-Tite Class I Trailer Hitch # 24907
    Draw-Tite is actually going to stop including that tab on Class I hitches like # 24907. But on the ones that still have it the distance from the center of the pin hole to the tab is 1-7/8 inches so your ball mount will not fit. The recommended ball mount for this hitch is # 3593 and it includes a pin and clip. I have linked a video review of it for you.
    view full answer...
  • Ball Mount and 2 Inch Ball for Class I Trailer Hitch on a 2008 Honda Civic Hybrid
    Since your 2008 Honda Civic already has the hitch you just need the ball mount and a compatible 2 inch ball. The recommended ball mount is # 3593. And for a 2 inch ball you can use # 19258. There would be no adapter needed you just need the right ball mount and ball for the hitch!
    view full answer...
  • What are the Dimensions of the Thule Replacement End Cap # 853-3593
    I borrowed a replacement Thule end cap, # 853-3593, from our demo studio to measure it. Overall it is 1.13 inches long by 1.4 inches wide, and 15/16 inches tall. The internal depth is 0.90 inches. I have included a picture showing where these measurements are taken.
    view full answer...
    Image 1 for
  • Ball Mount that Fits 1-1/4 inch Hitch with 2 inch Hitch Ball
    We offer ball mounts that fit 1-1/4 inch hitches that are compatible with 2 inch hitch balls. For example we have the # 3593 which fits that hitch size and then for a 2 inch hitch ball we have the # 19258.
    view full answer...
  • Why Won't My 1-1/4 inch Ball Mount Slide Into a Class I Hitch
    It sounds like you have a Class I hitch and are trying to use a Class II drawbar with it. Class I hitches are designed to do exactly what you are trying to do, prevent the use of a Class II accessory by not letting the holes line up. This is to prevent overloading the hitch. I attached an FAQ on hitch classifications for you to check out also. The correct ball mount to use with your Draw Tite Hitch part # 24915 would be the Sportframe Draw Bar part # 3593.
    view full answer...
  • How To Choose Correct Ball Mount for 1-1/4" Trailer Hitch
    In order to choose the correct ball mount you need to measure the distance from the ground to the top inside edge of the trailer hitch and then subtract the distance from the ground to the bottom of the trailer coupler while the trailer is level. If the vehicle is higher than the trailer you need a drop but if it's lower you'll need a rise. I have attached a full list of ball mount options below for a 1-1/4" trailer hitch.
    view full answer...

Do you have a question about this Trailer Hitch Ball Mount?

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S
Employee Dustin K
Video by:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F
Employee Chris R
Video Edited:
Chris R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.