bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 1 Inch
  6. Rise - 1 Inch
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K

Item # 36051
Our Price: $19.72
You Save: 63%
Trailer Hitch Ball Mount
Orders above $50 qualify for Free Shipping
Shipping Weight: 5 lbs
In Stock
Draw-Tite Trailer Hitch Ball Mount - 36051
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Product Expert Chris R

Is this right for you? Product Expert Chris R says:

Yes, if you:

  • If you plan on towing multiple trailers (with different coupler heights)
  • If you want a bit more versatility with your ball mount
  • If you plan on towing heavier trailers

No, if you:

  • If you like to keep things simple
  • If you don't tow too often
  • If you really only plan on towing one trailer
Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection. Great Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K part number 36051 can be ordered online at or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (1893)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch Ball Mount - 36051

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 1 Inch
  • Rise - 1 Inch
  • No Ball
  • Class II
  • 3500 lbs GTW
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.


  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Both drop and rise positions available to ensure level towing
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class II compatible only
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 300 lbs
  • Length: 7" from center of hitch pin hole to center of ball hole
  • Rise: 5/8" from top of inside of hitch opening
  • Drop: 1-1/4" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty

How to Measure Drop on Standard Ball Mount

36051 Draw-Tite Class II Ball Mount - 5/8" Rise or 1-1/4" Drop - 3,500 lbs

Replaces 90001

California residents: click here

Customer Satisfaction Score:

Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K - 36051

Average Customer Rating:  4.8 out of 5 stars   (1893 Customer Reviews)

Sturdy steel ball mount with solid shank measures 7" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.


Volkswagen ID.4 needs a drawbar no longer than 7" - could not find one local or on [online vendor], but etrailer got me covered. Shipping was fast.


I hooked up the draw bar today for the first time to the trailer that I built and the hitch I installed. The draw bar uses a cotter pin that slides on the bolt rather than going through a hole to mount the bar to the hitch. I have never used a sliding on pin in anything - I've only used those that go through a small hole matching the pin. This includes my farm tractor and other tools. I hope it is secure because it does slide on easily. The bar itself appears nice and strong.

I am still happy with the items. However, I have not used them much over the past few months. But, they will get much more use in a couple of weeks. I am putting the finishing touches on a camper that I have been building for half a year.thanks,
Lee - 10/25/2016


Very good construction, looks like it will stand up to my needs perfectly

Still is working awesome, Ive had zero problems.
Kelly - 08/10/2022


Excellent product at a great price. Fast shipping, as well!


Draw bar fit well and is the right height for my trailer. Thanks to etrailer for giving enough data to choose the right unit.


Good fit for VW ID.4


It works great


Product is great. Price was good . Delivery times are good. It works as it should.


We used our car hitch and cargo carrier last summer in a Honda Accord to support a cargo carrier. It held up great on a 4,000 mile camping/hiking trip from Mid Missouri to Glacier National Park, MT. We were able to use the carrier/hitch to carry our large tents and baggage (approx 120#)directly behind our car trunk. Initially I was a little hesitant at the smaller 1-1/4" tube hitch, but it was very stable throughout the long trip. Sure was a lot less drag than putting all our gear on a roof cargo carrier.


This is the 2nd hitch package I've bought from (The first was for a 2011 Outback, and this one was for a 2017 Outback.) And like the first, this order was handled perfectly by the etrailer rep. The hitch and drawbar arrived as promised and I had my mechanic install it yesterday. He said it was a fairly simple job (took him less than an hour) and the new wiring harness simply plugged in to the existing harness in the 2017 Outback (as opposed to having to be spliced in the 2011 Outback with the first hitch package). Also the price was very good... more competitive than buying it from, and having it installed by, a local dealer. All in all, it was a painless and pleasant experience. I will definitely buy my next hitch from etrailer when it's time to replace my 2017 Outback.


I received exactly what I ordered when I expected it and the pricing was super competitive. The drawbar fits my Gator perfect. Great online shopping experience. I Highly recommend

One year later this product has done the job without fail. Still very satisfied.
William S - 08/12/2020


This is an average product. Unfortunately it si too short to use on my 2018 Rogue with Draw-Tite hitch 36542. I will have purchase a longer ball mount such as Curt 45519.

Another drawbar option, and the one recommended for this hitch in the installation instructions, is # 36053
Draw Tite Drawbar for 1-1/4" Hitch - 5/8" Rise, 1-1/4" Drop - 9-3/4" Long - 3.5K
. I have linked it here for your convenience.
-- Etrailer Expert Victoria B - 08/13/2019


Received my drawtite hitch, draw bar and wiring harness quickly.The draw bar pin was missing, but received excellence service from your customer service department (Sherry). Looks great and can't wait to pick up my trailer and go camping.


The Convert-A-Ball is made in USA, appears to be high quality and just what I was looking for. The Draw Bar however was made in China

The Convert-A-Ball appears to be high quality, made in USA and just what I was looking for.
I needed a Draw-Bar to fit 1 1/4" receiver and with 1" shank hole, but nearest I could find was this Draw-Bar with 3/4" hole, so will have to drill out this one. Also was made in China, which I try to avoid although the quality appears to be good.
Wish I had known that the Draw-Bar came with its own Pin & Clip so I wouldn't have ordered that separately, so now I have 2. This why I gave only 4 stars.
Otherwise am happy with the order.


I installed this on a 2013 Outback in about an hour and a half. After drilling the holes and spraying the undercoating everything went together without a problem. Wiring harness was just as easy. Nice video to help.


Unit has worked well and held up. I only removed it once and that was for a week to travel for vacation. The paint is still like new, no rust can be seen. Unit creates no noise while driving with or without a trailer attached, not like a former hitch I had.


Fits well with the Drawtite class 2 hitch and places tongue for my 1/2 utility trailer level.


I like my Draw-Tite hitch and the second ball mount I just purchased so I can switch between 1 7/8" and 2" balls easily. Purchase and delivery through etrailer was effortless. I'm a happy customer.


Product is fine. It would have been nice to know that it came with a hitch pin and clip so that I didn't need to order one in addition to the ball mount.


got my hitch today everything was in the box. I liked the web site it was easy to use . the installation videos are very helpful ,and it was easy to find the hitch for my car . Thanks Great Job. Mike H


It looks tiny compared to other hitches, but is solid metal. The welds are fine and fits like it should. A necessary item for the trailer hitch.


All parts fit as required. Only problem was the instruction for the hitch was for a different auto. It was simple enough to install with the install video. Good product.


All of the items order where shipped correctly and the Installation of products where excellent. The how to video’s where very helpful. I would highly recommend etrailer. Installation took me two hours to complete in my driveway.


Just what I needed for my Honda.


Easy installation and perfect fit for my Lincoln MKX

Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

  • The Correct Drawbar for a 2003 Volkswagen Jetta with a Class I Hitch
    For your 2003 VW Jetta, the drawbar, # 36051, will not work because Class II accessories are designed with a feature that keeps them from being used in a lower class hitch. So you will need to use the Sportframe Drawbar, # 3593, instead. I pulled all the recommended hitches for your vehicle and this is the drawbar that is recommended as the proper fit for those hitches. There is not, necessarily, a recommended length. The limiting factor is the gross trailer weight and tongue weight capacity....
    view full answer...
  • Comparing Class I and Class II Ball Mounts for Differences When They Appear Identical
    The Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise - 6-5/8" Long - 2,000 lbs # 3590 will fit both Class I and Class II trailer hitch receiver. The # 36051 as you stated is only a fit for Class II trailer hitches. The reason for this is the rated towing capacity. Class I hitches are only rated for up to 2,000 lbs and there is often a welded stop in the shank to ensure only Class I rated accessories can be used so you don't have an issue with your 1-1/4 inch receiver for tongue weight...
    view full answer...
  • How to Select Correct Ball Mount to Keep Hitched Trailer Level
    Selecting the right ball mount is easy once you take some simple measurements of your tow vehicle and trailer. Having the trailer level when hitched is important for good handling and for reducing the chance for trailer sway. We have a handy article on this subject that I have linked for you. This shows the process of checking hitch ball and coupler heights to allow selection of the right ball mount, the one with the amount of rise or drop needed to keep the hitched trailer's frame level...
    view full answer...
  • Class II Ball Mount Recommendation for a 2005 Chevy Equinox
    The recommended Class II ball mount for your 2005 Chevy Equinox is the Class II Drawbar # 36051 that you referenced. You might also be interested in the following products to complete your towing setup: Hitch Ball with 2 inch Diameter # 19258 Hitch Ball with 1-78 inch Diameter # 19256
    view full answer...
  • What Ball Mount Is Needed For The VW Factory Hitch On A 2010 VW Tiguan
    I do have another flat ball mount for the 1-1/4 inch hitch on a 2010 VW Tiguan. It is the Draw-Tite Class II Ball Mount, # 36051. I went to the warehouse and measured the distance from the weld to the center of the hitch pin hole and it measured 2-3/4 inches. You will want to measure the ball mount you have and see if this ball mount will work on your VW factory hitch. If the Draw-Tite ball mount will not work, then the VW factory ball mount might be the only ball mount to fit the VW...
    view full answer...
  • Trailer Wiring Harness for 2002 Toyota Highlander
    The Plug-N-Tow wiring harness you mentioned, part # 33425 is indeed the correct harness for your 2002 Highlander. The harness is pretty easy to install, using existing connectors located behind the tail light assemblies with an additional wire that is ran to the positive battery terminal. Assuming that you already have a drawbar like part # 2923 for a 2 inch receiver or # 36051 for a 1-1/4 inch receiver and the appropriate trailer ball for your trailer, you are good to go.
    view full answer...
  • Ball Mount and 1-7/8 Inch Ball for Factory 1-1/4 Inch Trailer Hitch on a 2014 Chevy Equinox
    For any given Class I or II trailer hitch you are supposed to use the ball mount recommended by the hitch manufacturer because that is what the hitch and vehicle were tested with and given their rating based upon (including other factors). If the ball mount is not specified in the owners manual for your 2014 Chevy Equinox then I recommend ball mount # 36051 since it is the correct ball mount for an aftermarket Draw-Tite hitch (# 36408). For a 1-7/8 inch ball use # 19256. You will be limited...
    view full answer...
  • Ball Mount for 2013 Volkswagen Tiguan With Factory Installed Hitch
    The factory hitch on your 2013 Volkswagen Tiguan is 1-1/4", and the correct ball mount would be the Draw-Tite # 36051. This mount comes with a pin and clip and allows either 5/8" of rise or 1-1/4" of drop. It has a hitch ball hole that measures 3/4", and the size of the hitch ball you'd need would depend on the utility trailer's coupler. For a 2" ball you'd want # 19258 while for a 1-7/8" ball you'd want # 19256. I've added links to video reviews of each of these products for you to take...
    view full answer...
  • Ball Mount Recommendation for 1-1/4 inch Hitch Closest to Zero Rise/Drop
    The closest ball mount we have to a zero inch rise for a 1-1/4 inch hitch is the Draw Tite part # 36051 which has a 5/8 inch rise. For a 2 inch ball you'd need part # 19258 or for a 1-7/8 inch ball part # 19256.
    view full answer...
  • Ball Mount With 1-1/4 Inch Drop That Fits 1-1/4 Inch Trailer Hitch
    For a ball mount (draw bar) with a 1-1/4" drop that fits into a 1-1/4" trailer hitch you need the Draw-Tite # 36051, which has a 300 lb tongue weight capacity, 3,500 lb towing capacity and is only compatible with Class II 1-1/4" hitches. This ball mount includes a pin and clip but for a 2" hitch ball you need # 19258.
    view full answer...
  • Recommended Extended Ball Mount for 1-1/4 Hitch Receiver on 2018 Subaru Outback
    It sounds like you're looking for a longer ball mount for a 1-1/4" hitch receiver installed on your 2018 Subaru Outback. The longest available ball mount for a 1-1/4" hitch is the Curt Class II Drawbar - 3-7/8" Rise - 13-1/2" Long - 3,500 lbs # C45000, which is 13-1/2" long and will fit a hitch ball with a 3/4" diameter; hitch pin hole size is typically standard depending on the receiver size and a 1-1/4" receiver typically has a 1/2" hitch pin hole. This ball mount does have a 3-7/8" rise...
    view full answer...
  • What is the Recommended Ball Mount for a 2013 Subaru Outback Wagon
    You will not want to drill any holes in the ball mount shank or the hitch itself. This will void the warranty and it can weaken the metal and make the capacity unknown. The best thing you can do is get a ball mount that has the length you need. There is no set length it has to be. Provided that it clears the rear of the vehicle and is not excessively extended (varies depending on the vehicle, hitch, and tongue weight of trailer) you can use a 14 inch long ball mount. For the Class III...
    view full answer...
  • Recommendation for a Ball Mount for a 2010 Lincoln MKX with Factory 1-1/4 Inch Trailer Hitch
    For the 1-1/4 inch trailer hitches we carry for the 2010 Lincoln MKX, the recommended ball mount is Draw-Tite Ball Mount, # 36051. This ball mount has a 5/8 inch rise or a 1-1/4 inch drop. It is rated for 3,500 pounds gross trailer weight and 300 pounds tongue weight capacity. This ball mount accepts a ball with a 3/4 inch diameter shank like ball # 19258 (2 inch diameter) or ball # 19256 (1-7/8 inch diameter). I have also included an FAQ article on choosing the correct ball mount below.
    view full answer...
  • Trailer Hitch Recommendation for 2004 Subaru Forester
    For your 2004 Subaru Forester we have the Draw Tite hitch part # 36311 as a confirmed fit that does not require any welding to install. No drilling is required either. This hitch has a 3,500 lb towing capacity. You'd need to check the owners manual of your vehicle too to see what Subaru recommends as the overall towing capacity and go by the lower rated figure. For trailer wiring you'd then want the Tekonsha kit part # 118461 which is a confirmed custom fit. For a ball mount you'd then...
    view full answer...
  • What is Correct Ball Mount for Draw-Tite 1-1/4-Inch Class II Hitch # 36445 for 1994 Volvo 940 Wagon
    Thank you for providing your two photos showing the Draw-Tite hitch # 36445 that you have acquired for use on your 1994 Volvo 940 Series wagon. I was able to confirm with my technical contact at Draw-Tite that this hitch (which incidentally is no longer manufactured) is a correct fit for your vehicle and is a Class II-rated hitch with a tongue weight capacity of 300-lbs and a gross towing weight capacity of 3500-lbs. (Tongue weight is a measure of the downward force on the hitch applied...
    view full answer...
    Image 1 for Image 2 for
  • Trailer Hitch and Wiring for a 2013 Honda CR-V
    Your 2013 Honda CR-V has a towing capacity of 1,500 pounds and tongue weight capacity of 150 pounds. Consult the owner's manual to confirm. If loaded to capacity the trailer would weigh 2,700 pounds which is too much for the CR-V. If the trailer weighs 900 pounds then the most weight you could put in it would be 600 pounds because that would get you to 1,500; the max for the vehicle. For a trailer hitch I recommend Draw-Tite trailer hitch # 36520. For the appropriate ball mount use # 36051....
    view full answer...
  • Anti-Rattle Device Recommendation for Ball Mount # 36051
    You'd need an anti-rattle device like the part # RM-061-125 to remove the movement you have of the # 36051 in the hitch you have. This will hold the ball mount tight to the hitch and remove all movement.
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring for a 2013 Honda CR-V
    According to the 2013 Honda CR-V owners manual the maximum towing capacity of your CR-V is 1,500 pounds so the Casita trailer would be too heavy at 1,880 pounds. You could probably find a lighter trailer that is within the capacity of the CR-V. For a trailer hitch I recommend the Draw-Tite Class II hitch # 36520. For a ball mount use # 36051. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And to add a 4-Way flat trailer connector you can use # 118561. I have linked...
    view full answer...
  • Ball Mount Recommendation for Draw-Tite Class III Hitch on 2013 GMC Terrain
    Given the height of your receiver and the average height of a trailer coupler, we'd typically recommend a # 36051 ball mount. This ball mount would provide either a 5/8 inch rise or a 1-1/4 inch drop. The FAQ article I have linked you to shows some simple measurements you can take to determine how much of a rise or drop you'll actually need. Simply measure from the inside top of your receiver opening to the ground, and with your trailer jacked up so that it is perfectly level, measure...
    view full answer...
  • Does The Draw-Tite Trailer Hitch, # 36293, Include A Ball Mount For A Toyota Avalon
    On the Draw-Tite Trailer Hitch, # 36293, there is no mount hole for a hitch ball. You will need to get a ball mount that will go into the hitch receiver and give you the location where the hitch ball will be mounted. This hitch is for a 2000 to 2004 Toyota Avalon. For the Toyota Avalon you will need the recommended ball mount for that hitch, which is the Draw-Tite Ball Mount, # 36051. It will come with the pin and clip. The hitch ball you will need is the Tow Ready 2 Inch Hitch Ball,...
    view full answer...
  • Tow Ready Custom Fit Vehicle Wiring # 118425 Recommendation for a 2008 Jeep Grand Cherokee
    For trailer wiring you would want a Tow Ready Custom Fit Vehicle Wiring, part # 118425, as this Draw-Tite Trailer Hitch Receiver, part # 36362, does not include a wiring harness for your 2008 Jeep Grand Cherokee Loredo V6. I attached installation instructions and video for you to check out also. I attached installation instructions for the Draw-Tite Trailer Hitch Receiver, part # 36362, also. You may be also interested in the following items to complete your towing setup: Class II Drawbar...
    view full answer...
  • Is Draw Tite Trailer Hitch Really No Drill on 2018 Subaru Crosstrek?
    I can happily confirm for you that the Draw-Tite Trailer Hitch # 36644 is truly a no-drill install on your 2018 Subaru Crosstrek; it is a bolt-on installation and you will only need to lower your exhaust temporarily in order to install the hitch. For wiring which will allow you to power your trailer's lights you need Wiring Harness # 118467 which will give you a 4-flat connector. If you are going to be towing, the recommended ball mount is the Draw-Tite # 36051, for which you'd need either...
    view full answer...
  • Comparison Between Hidden Hitch # 90089 and Draw-Tite # 36520 for 2014 Honda CR-V
    Draw-Tite and Hidden Hitch are both sister companies that are owned by the same parent company, Cequent Performance Products. Both hitches are identical. The hitches share the same weight capacity, installation would be the same and the quality would be equal. If you'll be using the hitch for towing, you'll need the ball mount, part # 36051. You'll also need the trailer wiring harness, part # 118561 and a 1-7/8 inch trailer ball, part # 19256 or a 2 inch ball, part # 19258. I've provided...
    view full answer...
    Image 1 for
  • Trailer Hitch Recommendation for a 2006 Subaru Forester
    For the money you can't beat the Draw Tite hitch part # 36311 which is a confirmed fit for your 2006 Subaru Forester. It's better priced than the Curt and wouldn't ever require you to use a stabilizer strap like the Curt does with bike racks or cargo carriers. I attached an install video for this hitch for you to check out as well. For trailer wiring you would want the part # 118461. For a ball mount you would want the part # 36051. For a 2 inch ball # 19258 or for 1-7/8 inch part # 19256.
    view full answer...

< Previous
123. . .5

Do you have a question about this Trailer Hitch Ball Mount?

  • Why

    At we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Brandon M
Expert Research:
Brandon M
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee Adam E
Installed by:
Adam E
Employee Chris R
Video by:
Chris R

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-833-496-1390