bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Rise - 3 Inch
  6. No Ball
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs

Item # 36061
Retail:$53.57
Our Price: $26.64
You Save: 50%
Trailer Hitch Ball Mount
Orders above $50 qualify for Free Shipping
Shipping Weight: 7 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection. Great Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs part number 36061 can be ordered online at etrailer.com or call 1-636-306-4830 for expert service.
  • All Info
  • Reviews (1892)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch Ball Mount - 36061

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Rise - 3 Inch
  • No Ball
  • Class II
  • 3500 lbs GTW
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Drawbar can be used in rise position only
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class II compatible only
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 300 lbs
  • Length: 9-3/4" from center of hitch pin hole to center of ball hole
  • Rise: 3-1/8" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

36061 Draw-Tite Class II Ball Mount - 3-1/8" Rise - 3,500 lbs

Replaces 90006




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs - 36061

Average Customer Rating:  4.8 out of 5 stars   (1892 Customer Reviews)

Sturdy steel ball mount with solid shank measures 9-3/4" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.

by:

Looks and works as expected. E trailer is awesome to work with. Great customer service.




by:

We'll built and works perfect. Towed my motorcycle with no problems. I did notice that the fitment between the hitch and the drawbar seems to be much better than others I have seen. There is not a lot of slop. Very happy




by:

Worked perfect the first time. Easy to install and good quality




by:

This drawbar was clearly used. See the picture. I asked etrailer about it and sent this picture but the person that replied, Noah, thought it must have been bumped around in shipping. If shipping caused this much damage, it's a poor quality product. If it was, in fact, used, then etrailer lied to me. Either way...not good.




by:

Fast and helpful service. They helped me select an alternative to the hitch I originally ordered and it was a good choice. Trailered my track bike on a 300 mile round trip with absolutely no problems




by:

Good stuff. Sturdy with super easy install. Had it done in under an hour. Thanks!




by:

Guys did a good job!




by:

Nice little hitch that I got to use with my new receiver. Seems of good quality, paint and craftsmanship! Worked fine pulling my 4x8 trailer.




by:

Etrailer always makes everything so easy when ordering products. I have a little covered trailer and wanted to add a hitch to my 96 Camry. Etrailer had everything from the hitch, wiring package, the drawbar, and the size ball that I need to order to fit the smaller drawbar. What a great resource we have in Etraier




by:

I chose this drawbar to match the 3500 lb. towing capacity of the parts of my towing package. As noted on Etrailer videos, the towing capacity of your towing package is the capacity of the "weakest" part.




by:

Fits great around the bumper of my 2006 Taurus.




by:

It did the job!




by:

Solid, heavy, secure.




by:

The product in terms of its physical description was just fine, dimensions, hole sizes etc. However it came with the appearance of being a used unit. Scratch marks, metal mars and a little rust. Since, after all, it is a ball mount for a trailer hitch it wouldn't be long before I would be responsible for the same look it has now. But it would have been nice if the unit came looking like it was new to begin with.


Comments
Thanks for your review and your business. I have forwarded your feedback to our customer service team for handling.
-- Etrailer Expert Laura E - 11/26/2016


by:

Good purchase, used on my four wheeler, so has not been road tested or hauled heavy, but a nice piece and exactly what i needed to get the rise and distance away from the quad so you dont have to reach under the bed so far. Would probably be ideal for a car or something to keep the trailer back a little from the bumper.




by:

Always receive high quality products for a fair price and appreciate being assisted in my decisions and choices by the abundant details provided concerning the items offered by etrailer.com I've never been disappointed...etrailer is my "go to" source for a broad range of utility products. Products ship quickly and etrailer makes all necessary shipment preparations to ensure that products arrive intact and in new condition. Very happy with products and service.




by:

I purchased a draw tite trailer hitch with ball attachment and wiring harness. The wiring harness did not make the shipment, but as soon as the company was notified, they sent another right away. Great customer service and fast delivery made this project a snap. The hitch was easy to put on, and works great.




by:

Was recommended to me by Conner L. and exactly what I needed for my #36538 trailer hitch kit for my 2014 Malibu LS. It places the ball at a good height for my RightOn kayak trailer. Solid attachment.




by:

Works like it was described




by:

Customer service answered my questions promptly and professionally. The hitch order arrived promptly and I Installed it yesterday. The installation videos for the hitch and electrical wiring were very helpful. They were straight forward and seeing the install gave me the confidence to do it myself. Only possible suggestion is on the videos state the socket size of nuts, Trailer ball, and the ground nut/screw. Overall very good service & follow up!




by:

Quality product, competitive price, and most importantly, FAST SHIPPING. You really can't beat etrailer!!!




by:

Excellent fit...took about 1/2 hr to complete mounting hitch and wiring. Very happy with look and fit.


Comments
Thank you for asking...they are working great. Very happy with them.
Mike B - 05/01/2018


by:

Got a very good price on a trailer hitch for my '95 Camry.
It was fairly simple to install (after watching etrailer.coms video).
I use it to haul around my little utility trailer (Harbor Freight) and my 12 ft kayak (BassPro).




by:

We just had the trailer hitch installed today. Everything fit perfect - the hitch, the wiring and the ball mount. It was very easy to install.




by:

The part arrived in 3 days, instead of 5-7 days, as I expected.....awesome! The drawbar appears to be in good condition, but doesn't fit into the hitch at this time. Upon inspection of the hitch it appears that there is some debris from welding in the channel that the drawbar goes into. I think some cleaning of the hitch will take care of the problem.

Very satisfied with etrailer's products and delivery. Thanks!



25
1892
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount

  • Dimensions From Pin Hole to Platform for Clearance on Draw-Tite Drawbar for 1-1/4" Hitch Receiver
    From the center of the hitch pin hole to the back of the platform for the Draw-Tite Drawbar # 36061 measures about 7" (see attached).
    view full answer...
    Image 1 for
  • Correct Ball Mount for a 1995 Buick Riviera
    I am not sure which draw bar you have, but the recommended draw bar for your vehicle and trailer hitch is the Class II Draw bar 3-1/8 inch Rise, part # 36061. None of the hitches or draw bars we carry have tapered receivers or shanks, so the only thing I can think of is that you have a Class 1 hitch and a Class 2 draw bar which are not compatible with each other even though they have the same 1-1/4 inch by 1-1/4 inch shank. . The Class 2 shank will not fit in a Class 1 hitch, but a class...
    view full answer...
  • Which Drawbar Should be Used with a Draw-Tite Hitch on a 1993 Cadillac DeVille
    The hitch manufacturers recommend drawbars for their hitches based on vehicle height and the most common trailer heights. The recommended drawbar for the 1993 Cadillac DeVille hitch is part # 36071 with a 2-5/8 inch rise or a 3-1/4 inch depending on orientation. Please refer to instructions for installing the hitch as which way the draw bar should be oriented. I will include a link to those instructions below. The hitch for your DeVille is Draw-Tite (NO LONGER AVAILABLE) part 36173.
    view full answer...
  • Ball Mount Recommendation for a 2014 Jeep Patriot Latitude with Factory Hitch
    When you pick out a ball mount for a vehicle you want to pick out one with the correct amount of rise or drop so that when you are towing your trailer it tows as level as possible. Check out the FAQ article I attached that shows how to do this. From the research I did it looks like the factory hitch for your 2014 Jeep Patriot has a 1-1/4 inch opening. The recommended 1-1/4 inch ball mount for the aftermarket hitches for your vehicle is the Class II Drawbar # 36061 that you referenced....
    view full answer...
  • How to Choose the Right Ball Mount to Tow a Trailer Level with a 2003 Toyota Camry
    To choose a ball mount with the correct rise and drop, you'll first need to take two measurements: your hitch height and trailer coupler height. The difference between them will be your rise or drop. To take the first measurement make sure the vehicle is on level ground and measure from the ground to the top of the receiver opening. On hitch # 36336 for your 2003 Toyota Camry that measurement is approximately 12 inches. To take the second measurement make sure the trailer is on level...
    view full answer...
  • Ball Mount Recommendations for 2003 Buick Century
    When installed, the top of the receiver will be approximately 12-1/2 inches above the ground. The Draw-Tite Class II Trailer Hitch, item # 36374, for your 2003 Buick Century is designed to be used with the # 36061 ball mount in the rise position only. The manufacturer has done testing to ensure weight capacity and safety are kept within hitch limits. If your trailer would require a significantly higher or lower ball mount then you should probably not pull that trailer with this vehicle. The...
    view full answer...
  • What is the Correct trailer Ball Size to Work With the Draw-Tite # 36061 Drawbar
    Yes, the # 19256 Hitch Ball has a 3/4 of an inch thread shank. This ball will work with the Draw-Tite Class II Drawbar, # 36061.
    view full answer...
  • Ball Mount With 3 Inch Rise and 1-1/4 Inch Shank With 2 Inch Hitch Ball
    Since your dealer mentioned measuring to the top of the hitch, I concur that a ball mount with about a 3 inch rise is correct for your measurements. So you are right about the ball mount you need, the Draw-Tite Drawbar for 1-1/4" Hitches # 36061. Then for a 2" hitch ball the one that fits this ball mount is the 2" Hitch Ball # 19258.
    view full answer...
  • Would Using Hitch Adapter with Draw Tite Hitch for 2018 Chevy Trax Cut Capacity
    If you use a 1-1/4 inch to 2 inch with a hitch like the Draw Tite hitch part # 36554 you'd cut the capacity by 50 percent. Your best option would be the ball mount that fits the hitch directly with part # 36061.
    view full answer...
  • Which Ball Mount Should be Used on a Hitch for a 2009 Dodge Caliber
    With the Draw-Tite hitch, part # 24769, for your 2009 Dodge Caliber you should use part # 3591. I have added a link to the instructions for the hitch so that you can see the hitch profile and how the draw bar is positioned. Draw bar part # 36061 is for a Class II hitch and the hitches available for your Caliber are Class I, except for the Valley, so that ball mount would not fit in the hitch. I have included a link to all the ball mounts we carry for Class I hitches. You want the trailer...
    view full answer...
  • What is the Distance from the Ground to Top of the Ball on a 2006 Volvo XC70
    I do have some measurements using Draw-Tite trailer hitch # 36297. On a vehicle we installed hitch # 36297 on, the hitch measured 11 inches from the ground to the top of the receiver. Keep in mind this is not the same model vehicle and there are bound to be differences in ride height so these measurements should serve as a general guide. Then, when using the correct ball mount, # 36061, as indicated by the hitch manufacturer in the proper rise position, add another 3-1/8 inches to that...
    view full answer...
  • Cutting Needed to Install Trailer Hitch Receiver on 2016 Honda CR-V
    We do have a video showing the Draw-Tite Max-Frame # 75742 being installed onto a 2016 Honda CR-V like yours. I've linked it to this page. If you look at the video of the 2016 and skip ahead to about the 2:15 mark you'll see the process for cutting. I've also linked the install details of both hitches. If you're going to be towing with your CR-V you'll also need a wiring harness. The # 118561 is confirmed to fit and installs by plugging into a connector that is trim panels on both...
    view full answer...
  • Height of Draw-Tite Trailer Hitch 36554 on a 2015 Chevy Trax
    The height from the ground to the inside top edge of the receiver tube opening of part # 36554 on a 2015 Chevrolet Trax is 11-1/2 inches. I've linked a video of when we installed this hitch on a 2015 Chevrolet Trax that shows the measurement. If you are trying to find out the rise or drop of the ball mount you need, the next step is to measure from level ground to the bottom of the coupler of your trailer. There is a recommended Class II ball mount for this hitch part # 36061. It looks...
    view full answer...
    Image 1 for
  • Recommended Ball Mount for Class II Hitch Installed on 2003 Chevy Venture
    The recommended ball mount for your 2003 Chevy Venture for the Reese Class II hitch you have installed on your 2003 Chevy Venture is the Draw Tite part # 36061. Then for hitch balls you'd want the part # 19258 for a 2 inch ball or part # 19257 for a 1-7/8 inch ball.
    view full answer...
  • Draw-Tite Hitch for Mototcycle Towing With 2018 Buick Encore
    The Draw-Tite Class II hitch # 36554 is rated for 300 lb tongue weight and 3,500 lbs towing, most small utility/motorcycle trailers and one dirt bike would be less than this max range; please reference your trailer and motorcycles weight for an accurate assessment. I highly recommend that you refer to your specific vehicle's owners manual prior to towing. My research, the online manual I have available (Part No. 84098804 B Second Printing), has a statement on p197 "The vehicle is neither...
    view full answer...
  • What Parts do I need for Towing a Trailer with a 1999 Toyota Solara
    Draw-Tite part # 36336 does not include the manufacturer recommended ballmount, part # 36061. The only other pieces you would need are the trailer ball, the pin and clip or lock for securing the ball mount into the receiver and the wiring harness for your 1999 Solara. You would need to hardwire your vehicle with a wiring harness using part # 119178KIT. The ball mount recommended for your hitch uses a 3/4 inch ball shank diameter hole, so you will need to select a ball with that size...
    view full answer...
  • What is the Recommended Ball Mount for Draw-Tite Trailer Hitch, # 36297
    The Draw-Tite trailer hitch, # 36297, that you have referenced is a Class II trailer hitch. with a Class II trailer hitch, you will need to use the manufacturer recommended ball mount. According to the installation details linked below, the required ball mount is # 36061, and it should be used in the rise position only. It has a 3-1/8 inch rise and measures 9-3/4 inches from the center of the hitch pin hole to the center of the ball hole. This ball mount is rated at 3,500 pound gross...
    view full answer...
    Image 1 for
  • Will The Draw-Tite Class II 1-1/4 Inch Hitch # 36234 Fit A 1999 Subaru Outback
    The Draw-Tite Class II 1-1/4 Inch Hitch # 36234 will fit your 1999 Subaru Outback. It will fit 1990 to 1997 Subaru Legacy Outback and the 1998 to 1999 Subaru Outback Wagon. I am sending a link to the installation instructions on the Draw-Tite hitch. If you will be towing with this hitch you will also need the Draw-Tite Ball Mount # 36061, and the Tow Ready 2 Inch Hitch Ball # 19258. For the wiring harness you will need the Tow Ready T-One Wiring Harness # 118461. This harness will plug...
    view full answer...
  • What is the Correct Ball Mount for Draw-Tite Trailer Hitch # 36450 on a 2008 Saturn Vue
    Draw-Tite has indicated that the correct ball mount for hitch # 36450 for a 2008 Saturn Vue is # 36061 for use in the rise position only. For a pin and clip, you can use # PC2. With Class I and II trailer hitches, only the manufacturer recommended ball mount should be used as it has been tested/determined to be the best option for the lower Class hitches and the vehicles they are designed for. Using a different ball mount will void the hitch warranty. With Class III hitches and above,...
    view full answer...
  • What is the Correct Ball Mount for a 2005 Toyota Camry
    Because all of the trailer hitches for the 2005 Toyota Camry are Class II hitches, see link, you must use the ball mount specified by the trailer hitch manufacturer. Using a different ball mount voids the warranty because only the recommended ball mount has been tested and approved for each respective trailer hitch. For a Draw-Tite or Hidden Hitch trailer hitch, use # 36061. It has a 3-1/8 inch rise measures from the top of the receiver opening on the hitch. For the Curt hitch, the correct...
    view full answer...
  • Towing Capacity and Trailer Hitch Recommendation for 2017 Chevy Impala
    From what I found online it looks like your 2017 Chevy Impala has a towing capacity of 1,000 lbs. If the weight of your trailer loaded is less than 1,000 lbs then yes you could tow it. For a hitch then we have the Draw Tite part # 36538 which is a confirmed fit for your vehicle and would work well. For a ball mount you'd then want the # 36061 which is the recommended ball mount by Draw Tite. For a hitch ball part # 19257. For trailer wiring you'd then want the Tekonsha kit part # 118590...
    view full answer...
  • Recommended Trailer Hitch and Wiring Harness for a 2014 Chevrolet Malibu
    The best trailer hitch receiver we have for your 2014 Chevrolet Malibu LS is the Draw-Tite Trailer Hitch Receiver part # 36538. It is a custom fit that will install using pre drilled holes. It has a class I rating with a 1-1/4" receiver tube opening. As you can see from the attached video, it is fairly simple to install taking most around 50 minutes. The best trailer wiring harness we have for you is the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118576. This...
    view full answer...
  • What is the Right Ball Mount to Use with Draw-Tite Trailer Hitch for a 2007 Buick LaCrosse
    For a ball mount for Draw-Tite trailer hitch # 36374 for your 2007 Buick LaCrosse you would need # 36061. For a 1-7/8 inch ball use # 19257 and for a 2 inch ball use # 19258.
    view full answer...
  • Ball Mount Recommendation for a 2010 Chevy Impala
    For a ball mount for the hitches that fit your 2010 Chevy Impala use Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs Item # 36061. This ball mount takes a ball with a 3/4 inch diameter shank such as # 19258 for a 2 inch or # 19257 for a 1-7/8 inch.
    view full answer...


< Previous
123. . .7



Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee DeAnne T
Expert Research:
DeAnne T
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Andrew K
Installed by:
Andrew K
Employee Cole B
Installed by:
Cole B
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S
Employee Dustin K
Video Edited:
Dustin K
Employee Thomas T
Video by:
Thomas T

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-636-306-4830