bing tracking image
  1. Trailer Hitch Ball Mount
  2. Draw-Tite
  3. Fits 1-1/4 Inch Hitch
  4. Fixed Ball Mount
  5. Drop - 0 Inch
  6. Rise - 5 Inch
Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs

Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs

Item # 36065
lowest price pledge
Our Price: $34.80
Trailer Hitch Ball Mount
Orders above $99 qualify for Free Shipping
Shipping Weight: 8 lbs
Quantity: 
In Stock
Draw-Tite No Ball Trailer Hitch Ball Mount - 36065
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Sturdy steel ball mount with solid shank measures 10" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection. Lowest Prices for the best trailer hitch ball mount from Draw-Tite. Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs part number 36065 can be ordered online at etrailer.com or call 1-833-496-1390 for expert service.
  • All Info
  • Reviews (1769)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch Ball Mount - 36065

  • Fits 1-1/4 Inch Hitch
  • Fixed Ball Mount
  • Drop - 0 Inch
  • Rise - 5 Inch
  • No Ball
  • Class II
  • 3500 lbs GTW
  • Draw-Tite
  • Steel Shank - Gloss Black
  • 3/4 Inch Ball Hole Diameter

Sturdy steel ball mount with solid shank measures 10" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.


Features:

  • Ball mount lets you hook up your trailer to your tow vehicle
    • Shank slides into your vehicle's hitch receiver
    • Ball platform provides mounting point for hitch ball (sold separately)
  • Drawbar can be used in rise position only
  • Sturdy steel construction with solid shank
  • Black powder coat finish covers a-coat base for superior rust protection
  • Hitch pin and clip included - hitch lock sold separately


Specs:

  • Application: 1-1/4" x 1-1/4" trailer hitch receivers
    • Class II compatible only
  • Gross towing weight: 3,500 lbs
  • Tongue weight: 300 lbs
  • Length: 10" from center of hitch pin hole to center of ball hole
  • Rise: 5" from top of inside of hitch opening
  • Ball hole diameter: 3/4"
  • Pin hole diameter: 1/2"
  • Limited lifetime warranty


How to Measure Drop on Standard Ball Mount

36065 Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs

Replaces 90009




California residents: click here



Customer Reviews

Draw-Tite Drawbar for 1-1/4" Hitches - 5" Rise - 10" Long - 3,500 lbs - 36065

Average Customer Rating:  4.8 out of 5 stars   (1766 Customer Reviews)

Sturdy steel ball mount with solid shank measures 10" from center of hitch pin hole to center of ball hole. Drawbar is Class II compatible only. Powder coat finish over a-coat base provides excellent rust protection.

by:

The drawbar works great! It allowed us to pull our inflatable boat trailer at the correct height and distance from our Camry. Would recommend to a friend!


Comments
We towed the inflatable using the tow bar over 3000 miles with no issues. Great product!
Gail - 04/30/2022


by:

I've got a lowered 1995 VW Jetta with a 1.25" receiver. I had to use a 6" extension along with a long, straight drawbar so any steep incline had me going at an angle and even then I would sometimes scrape. Some one had this drawbar on their Jetta and it looked good. With the measurements provided on this site I determined it would sit far enough away from my bumper and elevate the ball so my trailer wouldn't be angled down so much. Very glad I ordered this unit, it fits the car and works perfectly! Much better than my previous fix.


Comments
Okay, a year later and not a single complaint regarding this ball mount. It dutifully does its job to allow me the crazy looks people throw at me when hauling my motorcycle or my wifes latest furniture purchase. I dont know why Americans think trucks are the only vehicle to haul things.
Toby - 07/03/2014


by:

Great price and a quality product. It arrived on schedule and there were no surprises. I would not hesitate to order from you again. I highly recommend eTrailer for all your trailer needs!!!




by:

Great for Saturn Aura and Chevrolet Mal ibu.


Comments
No problem!
Oleg - 06/05/2022


by:

This was nice. The rise was just right for my trailer




by:

Had to replace hitch & draw bar on my 2011 Camaro. This was exactly what I needed, delivery was fast & the price was good




by:

This thing works so well. Allows me to tow even with a sedan. Good quality as always from e-trailer.




by:

I've used this multiple times now along with the trailer hitch from etrailer that my friend and I installed ourselves. It works great even after a year. I would highly recommend an additional purchase of a locking pin that can be used with your car ignition key to keep your cargo safe.




by:

As you can see your product was 100% perfect for getting my one legged friend and former Marine back to enjoying the open road. He's allowed to easily load his wheelchair by himself and with the added strength and length it gives him great stability and ease.
Thanks again definitely recommend etrailer to all I run into, the price also greatly appreciated.




by:

It is what it is, a 19 inch riser draw bar


Comments
Solid, nothing to wear out
William D - 10/20/2021


by:

I have a 2016 300c awd. This riser bar was the perfect height to keep my boat trailer level with the ground.




by:

4000 miles with no problems.




by:

Shipped on time. Seems to be good solid quality and fits perfectly. All good! Thanks




by:

Great item works great




by:

There is, what seems to be an excessive amount of play between this drawbar and my hitch resulting in a lot of rattling. I will investigate using shims of some kind to alleviate the matter.


Comments
Using still shims has helped, not ideal but no other solution short of welding.
Regis - 01/24/2017


by:

Holding strong after a year, 10 tows, about a thousand miles. No issues!




by:

The hitch was easy to install, and etrailer easily added the drawbar, ball, and wiring that I needed. Overall this was a fast, inexpensive solution.


Comments
Thank you for following up. Other than a few bumps getting out of driveways, the hitch has been satisfactory. The Aura has such a low-riding bumper!*
Mike M - 03/12/2017


by:

This hitch has been great to use with my VW Golf. It had accurate measurements on the description. When it came it fit with my car and trailer exactly how I thought it was going to. It is also solid metal and much more durable than what a little car needs. This hitch is definitely not the weak link in my car/trailer setup. It is a hitch I’d recommend to my friends in a similar situation. If you have a small car, this is a great hitch.




by:

Ordered the hitch, wiring harness and drawbar for my 2011 Malibu. E-trailer was very good over all in the transaction, they communicated well, got the order out very quick and upgraded my shipping so I got the parts faster and the directions and video clips on their site were great and I had everything installed in just over 2 hours by myself - although a second person would have helped. the bolt wires they included with the hitch made getting the bolts through the frame so easy :) Have already used the hitch with a trailer and it worked great. I would definitely use them again!




by:

Works great! No issues.




by:

I bought for my 2020 Toyota Camry which sits low to the ground and needs at least 5" rise. The Drawbar hitch ball mount arrived as described and high quality as expected. I am very satisfied with my purchase. Highly recommend if you have a car and need a 5" rise for your trailer coupler. I am extremely confident and happy customer.




by:

Exactly as advertised. No problems. I used it on a Toyota Sienna, which has a very low hitch receiver. I'm pulling a small utility trailer.




by:

Arrived 1 day early and was exactly what I needed to complete my project.




by:

My order went very smooth and shipping was quick. Ordered this drawbar for my 4 wheeler and it worked great to tow my brush cutter to clear trails. Etrailer.com has a very user friendly website and fast shipping. I will definitely shop here first for all my trailer needs.




by:

Very good product at a good price. The only negative (for me anyway) is the length of the bar - it sticks out much farther than it needs to and puts more stress on the hitch frame than necessary. I end up cutting off almost 4" and redrilling the hole for the pin. For a low load on the tongue probably not an issue, but I prefer the shorter bar. Still a great deal. ( btw, talking about the 1-1/4" sq.bar not where the ball mounts)



25
1769
Show More Reviews

See what our Experts say about this Draw-Tite Trailer Hitch Ball Mount



  • What is the Finish on the Class II Drawbar 5 Inch Rise Kit, 36065
    The finish on the Class II Drawbar 5 inch Rise (Kit), # 36065, is a black powder coat.
    view full answer...
  • Recommended Draw Bar with 5 Inch Rise for 1994 Dodge Caravan with Class II Receiver
    If your Caravan has a Class II receiver the Class II Draw Bar with 5 inch rise, part # 36065 will work just fine for you. Keep in mind that this draw bar accepts a trailer ball with a 3/4 inch shank. The draw bar is rated for a maximum of 3500 lbs towing weight and 300 lbs of tongue weight.
    view full answer...
  • What is the recommended Draw Bar for a 1999 Cadillac DeVille
    The manufacturer recommended drawbar for your Cadillac DeVille is part number 36063 which has a 3-1/8 inch rise and 11-3/4 inch long distance between the center of the hitch pin hole and the center of the ball mount hole. When towing with a class II trailer hitch, the ball mount that is recommended by the manufacturer should be used. All class II trailer hitches are tested and rated with the specific ball mount for that hitch. Using a ball mount that is not recommended by the manufacturer...
    view full answer...
  • Can The Draw-Tite Ball Mount, # 36065, Be Turned Over And Used As A Drop On a Mercury Mountaineer
    A 1-1/4 inch hitch receiver is either a Class I or Class II hitch. All Class I and Class II can only use the ball mounts that are recommended for that vehicle. For safety reasons, if you have to change the rise or drop from the recommended ball mount, then the manufacturer does not recommend to tow that trailer with the Class I or Class II hitch on your vehicle. We have Class III hitches available for Mercury Mountaineers that will bolt on underneath the OEM 1-1/4 hitch. The Class III...
    view full answer...
  • Using a 36078 Class II Drop Drawbar as a Rise Instead of a Drop
    The drawbar you mentioned is not intended to be used in the rise position and would only create a 3-1/2 inch rise. We do carry a 5 inch and a 3-1/8 inch rise drawbar (see links below) that will fit the Class II hitch. These drawbars all have a tongue weight capacity of 300 lbs and a towing capacity of 3500 lbs. Keep in mind that if you need a significantly higher or lower drawbar to tow (you are not able to use the manufacturer's recommended drawbar for the hitch), you will void the manufacturer's...
    view full answer...
  • Can Hitch Ball with Short Shank be Used with 1-1/4 Inch Ball Mount 36065
    Yes, you could use a short shank. For a 2 inch ball with short shank that fits ball mount # 36065 you can use # 19258. And for a 1-7/8 inch ball use # 19256.
    view full answer...
  • Ball Mount for Trailer Hitch 24890 on a 2015 Dodge Dart Towing Detail K2 Trailer K2MMT4X6
    When we installed Draw-Tite trailer hitch # 24890 on a 2015 Dodge Dart the distance from the ground to the top of the receiver opening was 9-1/2 inches, see video link. That means you will need a ball mount with a rise of 6-1/2 inches to get to a height of 16 inches. We can get you close with ball mount # 36065 which has a 5 inch rise. For a compatible ball use # 19258.
    view full answer...
  • Can a Class II Ball Mount be Used with a Class I Trailer Hitch on a 2006 Mitsubishi Eclipse GT
    With a Class I trailer hitch on your 2006 Mitsubishi Eclipse, you should only use the ball mount that is recommended for use with the trailer hitch. Another problem is that the ball mount that you have referenced is a Class II accessory. Class II items are designed so that they will not fit in a Class I trailer hitch. You could use Sportframe Drawbar, # 3592, which will give you a 2-1/8 inch rise or # C45016, which will give you a 2-5/8 inch rise.
    view full answer...
  • What Is Needed To Tow A Pop-Up Camper With A 2004 Pontiac Grand Prix GT1
    Yes, you can tow a small pop-up camper with your 2004 Pontiac Grand Prix GT1, as long as the camper does not weigh more than 3,500 lbs. loaded. But, you will always want to check the owners manual or with the dealer for the gross towing weight capacity of your 2004 Pontiac Grand Prix GT1 to make sure the towing capacity is not exceeded. The Draw-Tite 1-1/4 Inch Class II Hitch, # 36241, would be a recommended hitch for your vehicle. It is a Class II hitch which has a 3,500 lbs. towing...
    view full answer...
  • What Trailer Hitch Will Fit A 2009 Chevrolet Malibu LTZ And Is Any Cutting Of The Bumper Needed
    The Draw-Tite Class II 1-1/4 Inch Hitch, # 36479, will work on both the the 2009 Chevy Malibu and the Chevy Malibu LTZ. The difference is the LTZ model uses a different wiring harness since it has LED taillights. On our website, there is a drop down box at the top for vehicle style once you have looked up the year, make, and model. It gives you a choice of All models, except LTZ or LTZ model only. The # 36479 hitch is listed for both of the vehicles, but under the LTZ model only option,...
    view full answer...
  • What is the Correct Ball Mount for a 2005 Toyota Camry
    Because all of the trailer hitches for the 2005 Toyota Camry are Class II hitches, see link, you must use the ball mount specified by the trailer hitch manufacturer. Using a different ball mount voids the warranty because only the recommended ball mount has been tested and approved for each respective trailer hitch. For a Draw-Tite or Hidden Hitch trailer hitch, use # 36061. It has a 3-1/8 inch rise measures from the top of the receiver opening on the hitch. For the Curt hitch, the correct...
    view full answer...
  • Trailer Hitch Fit and Towing Capacity for 2009 Pontiac G6
    The Draw-Tite Class II hitch # 36426 is a confirmed fit for your 2009 Pontiac G6 and the hitch itself offers a maximum towing capacity of 3500-lbs. If your trailer has a 2K-rated axle then the hitch will have plenty of capacity to tow it, but you'll also want to check the G9 owner's manual since the car itself may have a different towing capacity than the hitch. The lower-rated item determines overall capacity. A hitch installation video is linked for you. Towing also requires a ball,...
    view full answer...
  • Class II Ball Mount with 1-1/4" Shank Needed that has a 5" or 6" Rise/Drop
    I am attaching a link to all of our Class II ball mounts that fit a 1-1/4" receiver opening. Since adjustable ball mounts are geared towards vehicles that tow regularly, like pickups, they don't make any that fit a 1-1/4" receiver. Among the linked ball mounts we have the Draw-Tite # 36078 which has a 5" drop or the Draw-Tite # 36065 which has a 5" rise, both of which are rated for 3,500 lbs. Either of these ball mounts are compatible with the 1-7/8" Hitch Ball # 19256 rated at 2,000...
    view full answer...
  • Drawbar for Trailer Hitch of 2005 Pontiac G6
    For the Class II hitches that fit your 2005 Pontiac G6 like the Draw Tite part # 36426 the drawbar/ball mount you'd want would be the # 36065. Then for a hitch ball you'd want the part # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch hitch ball.
    view full answer...
  • What is the Recommended Ball Mount for a 2005 Toyota Sienna with a 1-1/4 Inch Trailer Hitch
    For a Class I or II trailer hitch with a 1-1/4 inch trailer hitch, you must use the ball mount that is recommended by the trailer hitch manufacturer. The reason is that the hitch has been tested with a specific ball mount and it is deemed to be the safest and best option for that vehicle and hitch combination. The only 1-1/4 inch hitch we carry for your 2005 Toyota Sienna is # C12065. The correct ball mount for this hitch is # C45016, and it must be used in the rise position only. It has...
    view full answer...
  • Hitch Recommendation for 2002 Pontiac Grand Prix for Towing Small Rental Trailer
    The most popular hitch for your 2002 Pontiac Grand Prix is the Draw-Tite Class II hitch # 36241. This hitch has a 1-1/4-inch receiver opening and a maximum trailer weight rating of 3500-lbs, which should be plenty for a small rental trailer. This hitch fits several versions of the Grand Prix, the GT Coupe, the sedan and the GTP. Many of our customer choose to tackle hitch installation on their own, but in the case of your vehicle some drilling is required. You also need a torque wrench...
    view full answer...
  • Procedure and Hardware for Trailer Hitch Installation on a 2012 Chevy Malibu
    The frame is hollow so there is nothing for self-tapping hardware to grip. Also, frame steel is generally very strong and can even require a special drill bit (rotabroach) so self-tapping hardware would have an even harder time installing. I have linked a video showing a typical installation for you and a link to the instructions. If you plan on doing some towing then the correct ball mount is # 36065. For a 1-7/8 inch ball use # 19256 and for a 2 inch use # 19258. For trailer wiring use...
    view full answer...
  • Hitch and Trailer Recommendation for a 2011 Chevy HHR
    The only way you could transport a 500 handicap scooter with your 2011 Chevy HHR would be for you to install a hitch like part # 24756 and then use a small trailer. A cargo carrier setup wouldn't work because your vehicle wouldn't have the tongue weight rating to suspend the weight of your 500 lb wheel chair off the ground unsupported. To complete your towing setup you would also want a ball mount, the # 118407 for trailer wiring, # 19256 for a 1-7/8 inch hitch ball, and # 19258 for a...
    view full answer...
  • What is the Towing Capacity of a 2009 Chevy Malibu
    I checked an online copy of the owners manual for the 2009 Chevy Malibu and the vehicle is rated for 1,000 pounds. I cannot recommend towing anything heavier than that. I would take what you have been told with a grain of salt. What you should do is follow the procedures specified in the owners manual. Paddle shifters on an automatic rarely work like you would want them to. Often times they result in a hard shift or delayed shift which can negatively affect ride quality plus it is one...
    view full answer...
  • Ball Mount and Hitch Balls for Use with Draw-Tite Hitch 36479 for 2007 Saturn Aura
    Draw-Tite's 1-1/4-inch Class II hitch # 36479 is a confirmed fit for your 2007 Saturn Aura. This hitch is rated to tow up to 3500-lbs but your car's rating may be different so be sure to check your owner's manual. The Aura's towing capacity will depend on all of the specific equipment in it. The recommended ball mount # 36065 that fits this hitch can be used with a 1-7/8-inch hitch ball such as # 19256 and also with a 2-inch ball such as # 19258. It just depends on the coupler size on...
    view full answer...
  • Recommended Trailer Wiring Harness For 2011 Chevrolet Malibu LTZ
    The wiring harness I recommend for your 2011 Malibu LTZ is the Tekonsha # 119147KIT, as the # 118450 you'd looked at isn't compatible with the LED taillight assemblies used by your Malibu LTZ. Installation of this harness requires hardwiring. The kit includes a circuit tester that helps you identify the wires behind the tail lights. If you need a trailer hitch for your Malibu I recommend part # 36479. This is a Class ll hitch and it has a 1-1/4 inch receiver opening. The drawbar I...
    view full answer...
  • Trailer Hitch and Towing Recommendation for a 2010 Chevy Malibu LT
    First you would need to start with a trailer hitch for your 2010 Chevy Malibu LT. For that you would want the Draw Tite # 36479 which is a confirmed fit. For a ball mount # 36065 would be the correct one to use. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. For trailer wiring you can use # 118450. I checked an online copy of the owners manual for the 2010 Chevy Malibu and the vehicle is rated for 1,000 pounds. I cannot recommend towing anything heavier than that.
    view full answer...
  • Trailer Hitch Recommendation for a 2004 Buick Regal
    I think you meant to type 2004 Buick Regal since there was no 2006 Regal. For a hitch to fit a 2004 Regal you would want the part # 36241 which has been confirmed as a fit. For a ball mount you would need part # 36065, for a 1-7/8 inch ball part # 19256, and for a 2 inch ball part # 19258. For trailer wiring part # 18252. Cost is available at the product links.
    view full answer...
  • Does Exhaust have to be Lowered to Install Trailer Hitch on 2007 Saturn Aura XR with Dual Exhaust
    The Draw-Tite trailer hitch # 36479 fits all models of the 2007 Saturn Aura including your XR with dual exhaust. Temporarily lowering the exhaust is not required but will make installation of the hitch a whole lot easier. I have included a link to the installation instructions for you. I have also linked a video showing an example installation for you. If you plan on doing any towing with the hitch the recommended ball mount is # 36065. For a 1-7/8 inch ball use # 19256 and for a 2 inch...
    view full answer...


< Previous



Do you have a question about this Trailer Hitch Ball Mount?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch ball mount for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch ball mount information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Brian T
Updated by:
Brian T
Employee Mike S
Updated by:
Mike S
Employee Dustin K
Video Edited:
Dustin K
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.