bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class II
  4. 1-1/4 Inch Hitch
  5. 3500 lbs GTW
  6. Visible Cross Tube
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"

Item # 36417
lowest price pledge
Retail:$355.79
Our Price: $191.40
You Save: $164.39
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 39 lbs
Quantity: 
In Stock
36417 - Visible Cross Tube Draw-Tite Trailer Hitch
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" part number 36417 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (53)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 36417

  • Class II
  • 1-1/4 Inch Hitch
  • 3500 lbs GTW
  • Draw-Tite
  • Visible Cross Tube
  • 300 lbs TW
  • Custom Fit Hitch

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Drawbar and pin and clip sold separately


Specs:

  • Receiver opening: 1-1/4" x 1-1/4"
  • Rating: Class II
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 300 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



36417 Draw-Tite Class 2 Trailer Hitch Receiver

90153 Hidden Hitch Class 2 Trailer Hitch Receiver

Installation Details 36417 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - 36417

Average Customer Rating:  4.8 out of 5 stars   (53 Customer Reviews)

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

by:
2015 Honda Odyssey

Box came badly damaged but no big deal. Installed very easily on my 2015 Odyssey. The trick is having the proper tap for the bolts to make the install go quick. I have installed 4 of my own receivers and this was the easiest so far. The only problem I ran into was that I had to grind some metal off of the metal tube of my bike rack to make it slide into the receiver without getting stuck and that same bike rack has never had a problem fitting into any of my other 3 receivers. Also, no where on the instructions sheet is there any mention of the torque specs although the videos say to torque according to the instructions.


Comments
Vincent, thank you for your review. This hitch part # 36417 is a Class 2, 1-1/4 inch hitch receiver. If your bike rack is designed for a Class 3 bike rack, it will not fit in this hitch. We do not recommend to grind the metal off of the shank of the bike rack because it could cause future structural issues which could lead to failure. If your bike rack is made for a 2 inch receiver than you can use a hitch reducer such as part # HTAD
Hitch Adapter 1-1/4" to 2" Trailer Hitch Receiver
$82.67
. This adapter will reduce your tongue weight by 50 percent. The torque specs for this hitch are on the bottom of page 1 of the installation instructions.
-- Etrailer Expert Heather A - 05/10/2018
Comments
Its been a year and the receiver is still in great shape and is only used for carrying bikes. I had mentioned that my tube on the bike rack did need some grinding to allow it to slide into the receiver properly, and of course I didnt grind down a 2 tube to 1-1/4, as my carrier is/was also used on 3 other vehicles, all with 1-1/4 receivers as well and they all worked fine. Maybe it was just a little extra powder coating that caused it, but it fits and works fine now and seems to be holding up well.
Vincent - 05/08/2019


by:
2012 Honda Odyssey

The hitch receiver was fine and went on easy. It interferes with the bumper a bit, so I cut a notch in the bumper to accomodate it. In the installation video, it says that the underbody trim panel that needs to be removed should not be reinstalled. I do not know why it says that because I reinstalled that piece and it fit just fine with the hitch installed. The wiring was also an easy installation. I did not like the thought of having the wiring hanging into the trunk area, so I cut a hole in the side trim panel so I could feed the wiring into the storage compartment as shown in the picture.



by:
2009 Honda Odyssey

This was actually a replacement for a ten year old hitch on a 2009 Honda Odyssey which got very rusty over the years. The rust is my only complaint. Installation is very easy. Suggest anti-seize on the fine thread bolts before installation. I used a milk crate to support the hitch at installation.



by:

Installed by my auto mechanic on my 2005 Honda Odyssey. Worked well for my bike rack. Info on website very clear and helpful



by:
2012 Honda Odyssey

Fits great, works great. The only trouble I had was getting the bolts fastened on the exhaust side. I think the threads on the bracket were severely corroded, and using the brush cleaner and WD-40 only helped a little. No fault of the trailer hitch receiver though!



by:
2014 Honda Odyssey

Fantastic product. Very easy to install. With the right tools and a little know how I was able to install by myself without any type of lift. It probably did help that car was fairly new as people have told me that once the holes for the mounting bolts get to be a few years old they rust and fill with road crud making it more difficult. Today it still works extremely well for my bike rack.


Comments
it’s still great! works well and no rust
john g - 03/20/2018


by:
2013 Honda Odyssey

Great item. Great price. Great shipping arrived in 2 days. Perfect fit, already installed on 2013 Honda Odyssey. Great install instructions, plus how to install video on line. Great service and great follow-up from company. Highly recommend.


Comments
I have used it a lot. I have a 5 x 8 ft trailer and a cargo carrier I use on trips. Great fit for my Honda Odyssey, it does not drag on low spots in driveways. Fits out of the way when installed. I would buy it again and again. Best on the market.
Donald - 12/22/2020

by:
2016 Honda Odyssey

As advertised, the hitch arrived very quickly (within 2 days!). It's high quality material and was simple to install. The installation video e-trailer provides was spot-on. I am not particularly mechanically inclined and I got the hitch and wiring harness installed inside of 2 hours by myself on my 2016 Honda Odyssey.



by:

Hitch was delivered faster than promised. online ordering was easy. Haven't installed hitch yet. Installation videos make it look simple to install.


Comments
Installed so easily. Tow hitch has met and exceeded my needs.
MVF - 08/27/2016


by:

Very easy installation. Not easy finding the 1/2" nylon tube brush, wish when buying from etrailer it would show up in the additional items you might need. Came scratched up and not due to shipping, scratches was under rap around cardboard on crossbar. This tells me it was to the packers knowledge this was sent to me this way. A little disturbing since it shows on the Van. Easier not using ramps, less lifting and slid over tail pipe without removing anything. Probably spent 40 min cleaning out one of the weld nuts on van and the rest was a 10 min job.
Shipping was fast and tracking was great.



by:

Very easy to install. Already used it to pull a trailer to CT. Only comment I have is once I tightened the 4 bolts the hitch was in contact with the rear bumper and it pushes up on it some. No damage but over time it may chafe on the plastic bumper cover. Otherwise very satisfied with the hitch.



by:
2010 Hyundai Tucson

This is the 3rd hitch I purchased from etrailer.co over the last 10 years and it could not have been easier to order and shipped very fast. I have a mechanic buddy who helped me with all 3 installs. It is much easier to have the vehicle on a lift. I had no issues with the install and the instruction videos were perfect. The trailer wiring I did myself with no problems thanks to the detailed video. Over the years I always recommend etrailer.com to anyone that is looking for a hitch. This is the best company to buy a hitch from and you can't beat the prices. I will always recommend etrailer and I will be buying another hitch soon for my wifes new Hyundai Tucson.



by:

This item is well-made and we recieved it without any issues or problems. We are a family of 4 and needed this for a bike-rack we are getting.
With our minivan not have a hitch already this was step one of our solution. We did not mount it ourselves, but had a automotive place do it for us for a nominal fee.



by:
2006 Honda Odyssey

This Draw-Tite hitch seems to be of the highest quality. The install would have been simple, however, our Honda Odyssey is 8 years old and it has spent its whole life in Wisconsin exposed to 8 winters. The nuts in the frame rails were very rusty!! It took some major muscle with a heavy duty wire brush designed for the application and a half a can of WD40 to clean the threads enough to thread the supplied bolts. After getting the the bolts threaded I needed a breaker bar on my ratchet to torque the bolts down. To me it seemed as if the supplied bolts could have been half as long. The install with clean threads would be 30 minutes tops. With the task of cleaning the threads it was close to 120 minutes to complete the install. In the end I am happy with the product quality, fit, and the final appearance, and it feels good to have done the job myself!



by:

With only 4 bolts, it should be easy to install this hitch, and it is. Look at the video and you will have no difficulty.

I drove the back wheels of my Ody up on some 4" high wooden ramps to get sufficient clearance to remove the rubber exhaust hangers. Spraying the rubber hangers with silicon lubricant makes removing them much easier.

Since I was working by myself, I used gallon paint cans and some short pieces of 2x4 to get the two ends of the hitch held up just below the frame, so I could start the bolts on each side without having to hold up the hitch while doing it.

Note that the instructions which come with the hitch call for an 18mm wrench/socket for tightening the bolts, when the actual wrench/socket required is a 19mm.

The hitch looks sturdy and well made, and fits closely under the rear of the Ody.

Finally, the personnel at etrailer were very quick to ship the hitch, and I got keeping me informed of the status. I am a very pleased customer, and hightly recommend etrailer.com.



by:

I backed the van up on ramps, cleaned the holes with WD40 and a round brush, slipped the hitch up over the exhaust (no need to remove from the hangers) and installed the bolts and torqued to spec. I think it took me about 10 minutes to do the hitch install. No real need to remove the tailpipe from the hangers, just need to move it to the side to get at the bolts with the ratchet and torque wrench. Very nicely made hitch! I wish I would have known the hitch comes with a rubber plug to keep the crap out, as I ordered one with it. I have 2 of them now.



by:
2007 Honda Odyssey

I was amazed at the efficiency of your company.
I ordered the trailer hitch receiver and wiring harness on saturday
and received it on tuesday. Wednesday I installed it without a problem. Following the installation videos made it twice as simple.
On my 2007 Honda Odyssey, I did'nt have to lower the tail pipe.
Thanks Etrailer



by:
Honda Odyssey

The fit of the hitch is perfect. But, unless you've just bought a new vehicle, there is no way the installation will take 20-30 minutes. Our Odyssey is 4 years old. The threaded inserts for the hitch bolts were rusty and filled with dirt. It took 20 minutes just to clean them out so the bolts would thread in. Then, each bolt took significant muscle to tighten completely. Now that it's on, it's on for good.

It's a great hitch. etrailer shipped quickly (and for free). I am very happy with this purchase.



by:
Honda Odyssey

I purchased this to accommodate a bicycle rack on my Honda Odyssey. For this it works perfectly. Due to the design of the top of the hatch on recent Odysseys, they cannot take a hanging type bike rack.

Dealing with etrailer is easy. Delivery was quick. The video instructions on their web site were perfect. Our bikes are happy; I'm happy. ;-)




by:

I backed the van up on ramps, cleaned the holes with WD40 and a round brush, slipped the hitch up over the exhaust (no need to remove from the hangers) and installed the bolts and torqued to spec. I think it took me about 10 minutes to do the hitch install. No real need to remove the tailpipe from the hangers, just need to move it to the side to get at the bolts with the ratchet and torque wrench. Very nicely made hitch!



by:
2007 Honda Odyssey

I put this on an 07 Honda Odyssey and it was beautifully simple. I used the Curt wiring kit also that just plugs into the junction box behind a trim panel also and that was perfect. We just put some grease on the rubber muffler hangers to pop them loose and we were on our way.

My friend helped me and we both were shocked when everything was done in less than an hour and we didn't have to go get anything else to make it work the first time. Thanks for selling 2 great products.



by:
2006 Honda Odyssey

2006 Honda Odessy, hitch and lighting, videos were perfect, especially the attention to preparing the nuts on the frame, if you don't spend the time to get them clean be prepared for sore arms and new four letter combos while you try to start those bolts and hold the hitch up. Overall your 3 rated difficulty was right on the mark.



by:

Fast shipping, easy installation, a great product. Already setup bike rack on it and ready for scout outing with this new Draw-Tite hitch.



by:

The holes in the hitch didn't line up. Three bolts went together perfect, but one was slightly off. I needed a trip to the hardware store for another bolt. Another thing I was uncertain about was the position of the washers. I assumed the raised ribs faced the hitch.



by:
2015 Honda Odyssey

Easy install on my 2011 Odyssey (Touring Edition). I did need to remove the driver side plastic filler box (3 plastic rivets, 1 hex bolt and 1 Phillips screw). Slipped hitch over exhaust on passenger side then supported driver side. Started bolts on passenger side then on drivers side, then tightened all down to spec. Done in 15 minutes.


25
53
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch



  • How to Remove Plastic Shield to Install Draw-Tite Trailer Hitch 36417 on a 2011 Honda Odyssey
    I spoke with my contact at Draw-Tite, and they are aware of the plastic shield to which you are referring. They are currently in the process of adding this information to the instructions, so that they will cover the 2011 Honda Odyssey models. If you take a look at the cover, it should be held on by some plastic rivets that can be popped out with a rivet tool. You may be able to retain the shield if you trim it, but more than likely it will be removed entirely. I am including a link...
    view full answer...
  • Tap Size For Clearing Threads for Installing Hitch on 2015 Honda Odyssey
    The bolts that come with the Draw Tite hitch part # 36417 are size M12 X 1.25 X 35mm CL8.8 Bolt. The size thread tap you'd need is M12x1.25mm. I attached a few help articles on tapping threads for you to check out as well.
    view full answer...
  • Does Draw Tite Trailer Hitch # 36417 Fit 2015 Honda Odyssey
    The Draw Tite hitch part # 36417 fits Honda Odysseys from 1999 all the way through 2017. It will easily work on a 2015. We just haven't had the chance to install the hitch on all year vehicles it fits.
    view full answer...
  • Does Install of Draw Tite Hitch on 2015 Honda Odyssey Leave Off Lower Bumper Panel
    The driver side lower panel of your 2015 Honda Odyssey would not get reinstalled after the install of the Draw Tite hitch part # 36417 since the hitch occupies that space. Tapping the weld nuts is not always needed but sometimes if the vehicle has seen several winters with salt on the road then the threads most likely will end up dirty and need to be tapped. Sometimes you can get by with just cleaning them with a wire brush. The install instructions link is good now as it worked for me....
    view full answer...
  • Visibility of Draw-Tite Class II Hitch on Honda Odyssey
    The construction and layout of the under body at the rear of the vehicle will have the most influence on how visible the hitch will be. The hitch you were looking at, the Draw-Tite Class II for the 1999-2011 Honda Odyssey is typical of how all of the receiver hitches available for the Odyssey would appear once they are installed. Some people find the round tube hitches to be a bit more pleasing to the eye. The Draw-Tite Class III Receiver Hitch, part # 75270, is an example of a round tube...
    view full answer...
  • Would Class II Hitch for 2007 Honda Odyssey Be Able to Tow Small Trailer
    The Class II hitches for your 2007 Honda Odyssey like the Draw Tite part # 36417 which is a confirmed fit have a decent towing capacity of 3,500 lbs total trailer weight and 300 lbs tongue weight. If the weight of your trailer is under those figures the hitch would be just fine. You'd also need to check the owners manual of your vehicle to determine the capacities of it as well. Be sure to stay under the lower of the two capacities. For trailer wiring you'd then want the Tekonsha kit...
    view full answer...
  • Hitch and Wiring Recommendations for a 2007 Nissan Altima and a 2005 Honda Odyssey
    Trailer hitches usually have very specific applications, a hitch from a 2001 Chevy Impala would not also fit on a 2007 Nissan Altima or a 2005 Honda Odyssey. For your 2007 Nissan Altima you would want a Draw-Tite Trailer Hitch # 24796. I attached installation instructions and an installation video for this product for you to check out also. For trailer wiring you would want a Tow Ready Custom Fit Vehicle Wiring # 118470. Installation instructions and installation video attached. For the...
    view full answer...
  • Recommended Trailer Hitch Receiver For 2010 Honda Odyssey
    On your 2010 Honda Odyssey all the trailer hitch receiver options will be noticeable from the back as even the crosstube is exposed. I recommend the Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # 36417 which is the least noticeable based on size. This is your best option for being discreet. The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75270 will give you more options for accessories and greater strength while being a little more...
    view full answer...
  • Trunk-Mount Bike Carrier Fit Limitations for 2008 Honda Odyssey with Roofline Spoiler
    You ask a very good question about your 2008 Honda Odyssey and what design feature makes it less compatible with trunk-mount type bike carriers. That feature on your Odyssey is the spoiler at the back of the roof above the rear hatch. Spoilers on many vehicles pose a challenge for fitting many otherwise great options in bike racks. The reason is that the attachment straps or cables that secure trunk racks to vehicles will make contact with the spoiler, and over time could lead to marks,...
    view full answer...
  • Are Support Straps Required on Curt Hitch C12031 if I Dont Exceed Tongue Weight Honda Odyssey 2014
    If you want a 1-1/4 hitch for your 2014 Honda Odyssey, my personal recommendation would be to go with the Draw-Tite Class II Receiver Hitch, # 36417. This hitch has a 300 pound tongue weight capacity and does not require the use of support straps. Curt only offers the one style of Trailer Hitch Support Straps, # 18050. Curt does require that these straps be used with all non-trailer loads no matter what the weight is. Failure to properly support these loads on the Curt Class II Hitch,...
    view full answer...
  • Replacement Trailer Hitch Hardware Kit for a 2014 Honda Odyssey
    The hardware kits are available independent of the trailer hitches. To get new hardware, you will need part # RHK. Enter the hitch number and select the manufacturer where indicated on the page to get the correct hardware. The hardware that comes with a hitch is designed for one time use. There are currently 2 Hidden Hitch trailer hitches that will fit your 2014 Honda Odyssey. The Class-III hitch 2-inch receiver # 75270 and Class-II hitch 1-1/4 inch receiver # 36417. I have included...
    view full answer...
  • Will 2003 Honda Odyssey Hitch fit 2009 Model
    I checked with the manufacturer and 90737 has been discontinued and is also not a fit for your 09 Honda Odyssey. The last year that hitch covers is 2004. Hitch # 36417 is the trailer hitch you need because it covers 1999-2009. If you would still like a replacement hardware kit for hitch 90737, you can order by clicking on the part # RHK. The installation instructions for the custom-fit hitches for your vehicle do not mention needing an exhaust hanger, however, they do say to temporarily...
    view full answer...
  • Curt or Draw Tite Trailer Hitch Recommendation for 2016 Honda Odyssey
    For your 2016 Honda Odyssey I would recommend the Draw Tite hitch part # 36417 over the Curt hitch part # C12031 because if you were to use a hitch mounted accessory like a bike rack the Draw Tite does not require the use of a stabilizer strap like part # 18050 like the Curt does. Either hitch would have about the same visibility. Some people prefer the look of square tube over round tube, but realistically both will look about the same.
    view full answer...
  • Is Dual Receiver Adapter Available for Draw-Tite # 24899 Class I Hitch on 2010 Honda Accord
    Thank you for your purchases from etrailer. According to my research the hitch you purchased is not the Draw-Tite Class II unit # 36417 but actually the Class I hitch # 24899. A Class I hitch is a light-duty hitch that has the capacity to transport only 2 bikes, even if the bike carrier can hold more than 2. (You might refer to the linked article on hitch classes.) The bike rack you bought, the excellent Thule Apex 4 Bike Carrier # TH9025, will fit your Class I hitch but you cannot transport...
    view full answer...
  • Recommendations on a Ball Mount and Lock to Fit a 2011 Honda Odyssey with a 12 inch Hitch Height.
    You will need two measurements and a little math to determine the correct ball mount for Honda Odyssey. You will need to measure, on level ground, your Honda's hitch height from the top of the receiver hitch opening to the ground. Next, measure from the bottom of your trailer's coupler to the level ground. The difference between these two numbers will determine the rise or drop you will need in your ball mount. I have attached a link that will show in more detail how to choose a correct...
    view full answer...
  • Transferring a Trailer Hitch From a 2008 Honda Odyssey to a 2012 Honda Odysssey.
    Both Draw-Tite Trailer Hitches, part # 75270 and # 36417, are compatible with the 2012 Honda Odyssey. I recommend checking the bolts and bolt holes for wear prior to transferring to the 2012, and ensuring that there isn't any damage, cracks or severe rust on the hitch. For a wiring harness, I recommend Curt's T-Connector, part # C56378. This installs into the existing wiring in your taillights to quickly add a 4-pole connector. I've included a video of the Tow Ready kit, part # 118521...
    view full answer...
  • Best Ground Clearance Trailer Hitch Recommendation for 2009 Honda Odyssey for Bike Rack
    The smaller hitch size of 1-1/4 inch would be your best option as it's enough to carry a bike rack, but since it's smaller it would have less of a chance to drag on the ground. For the the Draw Tite part # 36417 is best option. This option is better than the Curt equivalent for your vehicle because it does not require the use of a stabilizer strap when carrying a non-supported load like a bike rack. The most popular bike rack we carry that has been confirmed to fit this vehicle is the...
    view full answer...
  • Trailer Hitch with Best Ground Clearance and Trailer Wiring for a 2015 Honda Odyssey
    In terms of ground clearance, the Class II hitches for your 2015 Honda Odyssey will have slightly better clearance than the Class III hitches. From the ground up to the bottom of the receiver it will be approximately 9-1/2 inches. This isn't much but vans sit low to the ground so it is to be expected. As far as the factory hitch It is probably in a comparable position but it is possible that it is slightly higher or lower. For a trailer hitch you can use # 36417. This hitch is rated...
    view full answer...
  • Trailer Hitch Suggestions for 2008 Honda Odyssey, Class II or Class III
    Great question, the short direct answer is primarily receiver size, 1-1/4" versus 2". The physical weight of a Class II hitch for a passenger vehicle versus the physical weight of a Class III hitch is going to be negligible, as in single digit pounds if any difference at all. A Class III hitch for passenger vehicles will have a 2" opening, this receiver size is what I always recommend first as it provides greater options for the future. The exact weight of each of the hitches you identified...
    view full answer...
  • Distance from Mounting Bracket to Top of Hitch Opening on a Draw-Tite Hitch For 2005 Honda Odyssey
    I went out into our warehouse and measured a Draw-Tite Trailer Hitch Receiver # 36417 for you and found that it measure 3-7/8 inches from the top of the bracket to the top of the hitch opening. The recommended ball mount for this hitch is the Class II Drawbar # 36071. I attached a review video for you to check out also. You may be interested in the following products to complete your towing setup: Hitch Ball # 19256 Pin and Clip # PC2 Tow Ready Custom Fit Vehicle Wiring # 118438 (installation...
    view full answer...
  • Will Trailer Hitch From 1999 Honda Odyssey Fit 2003 Honda Odyssey
    The trailer hitch you have on your 1999 Honda odyssey will indeed fit your 2003. Since the installation hardware is intended for one-time use you will want to order the installation hardware kit for your hitch. You can order the kit by entering part number # RHK and then enter the part number of the hitch you have and select the manufacturer of the hitch from the drop-down box. Then just enter how many kits you want and you are good to go.
    view full answer...
  • What is a Recommended Hitch for a 2011 Honda Odyssey?
    The trailer hitch I recommend for lightweight towing on your 2011 Honda Odyssey is the Draw-Tite # 36417. A confirmed fit for your vehicle, it has a tongue weight capacity of 300 lbs and a trailer weight capacity of 3,500 lbs, which is more than enough for you to haul your sailboat. It also offers a simple bolt-on installation, so you can avoid drilling into your Odyssey. The other Class II option available for your Odyssey is the Curt # C12031, though it requires the use of stabilizer...
    view full answer...
  • Towing Capacity of 2011 Honda Odyssey Fitted with Draw-Tite Hitch 36417
    The Class II Draw-Tite hitch # 36417 has a maximum rated towing capacity of 3500-lbs. This rating applies to the hitch itself and the Odyssey could potentially have a lower or higher towing capacity depending on the particular engine, transmission and accessory options installed at the factory. I reviewed an online edition of the owner's manual for the 2011 Odyssey and on page 589 the towing capacities, based on passenger count, are listed. These range from the maximum trailer weight of...
    view full answer...
  • Euro Style Ball Mount Recommendation for Draw Tite Hitch on 2001 Honda Odyssey
    For a Class II Euro style ball mount that would work well with your Draw Tite hitch part # 36417 we have the part # C45591 for a ball mount with a 3-1/8 inch rise which would work well. Or we have the part # C45571 which has a 2-5/8 inch rise. Both of these have 1-7/8 inch balls.
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Joe B
Test Fit:
Joe B
Employee Brent H
Test Fit:
Brent H
Employee Mike L
Expert Research:
Mike L
Employee Sarah L
Expert Research:
Sarah L
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Andrew K
Video by:
Andrew K
Employee Alan C
Video by:
Alan C
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Jenny M
Updated by:
Jenny M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.