bing tracking image
  1. Trailer Hubs and Drums
  2. Dexter Axle
  3. 8 on 6-1/2 Inch
  4. For 5200 lbs Axles
  5. For 6000 lbs Axles
  6. For 7000 lbs Axles
Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs

Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs

Item # 42866UC3-EZ
lowest price pledge
Our Price: $167.95
Trailer Hubs and Drums
This item qualifies for Free Shipping
Shipping Weight: 39 lbs
Quantity: 
In Stock
Dexter Axle Trailer Hubs and Drums - 42866UC3-EZ
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs part number 42866UC3-EZ can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (146)
  • Q & A (0)
  • Photos
  • Used (3)
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 42866UC3-EZ

  • 8 on 6-1/2 Inch
  • For 5200 lbs Axles
  • For 6000 lbs Axles
  • For 7000 lbs Axles
  • Hub with Integrated Drum
  • EZ Lube
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17 Inch Wheel
  • 17-1/2 Inch Wheel
  • 14125A
  • 25580
  • Dexter Axle

Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Hub and drum are made in the USA


Specs:

  • Application: 5,200-lb to 7,000-lb E-Z Lube trailer axles with #42 spindles
  • Drum dimensions: 12" diameter x 2" wide
    • Works with 12" brake assembly
  • Bolt pattern: 8 on 6-1/2"
  • Grease cap flange diameter: 2.72"
  • Wheel stud diameter: 1/2"
  • Weight capacity: 3,500 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 14125A (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 14276
  • Grease seal (included): GS-2250DL
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"

E-Z Lube-Compatible Assembly for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


K08-219-9B Dexter 12" Hub and Drum Assembly for 5.2K to 7K with Hardware - 6 on 5-1/2 - EZ Lube

Replaces 42866UC3-EZ






Customer Reviews

Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs - 42866UC3-EZ

Average Customer Rating:  4.7 out of 5 stars   (146 Customer Reviews)

Install this hub-and-drum assembly on your trailer. Fits 5,200-lb to 7,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (14125A) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

by:

I love ordering from etrailer. They have a great team. The brake assemblies and hubs arrived on time and the installation was easy. The only negative was one of the drum assemblies arrived with a crushed seal and the outer bearing cage was bent up. I know etrailer would have sent replacement parts but do to time constraints I made a trip to our local trailer parts store. $20 later and a little time I was back to work. There was no damage to the box. The bag with the bearings and seal in it got to where it could get damaged by the weight of the drum.




by:

Would to see this package available with optional upgrades for name brand bearings and grease seals (eg. Timken, national, skf).




by:

Thanks so much etrailer for making me feel so much better/safer about carrying heavier loads in my trailer. Katrina also went the extra mile when it came to customer service and patience with my order. I had 15" six lug hub and drum assembly which held all I could load on them, like I said I just did not feel safe so I went with this hub and drum assembly which came with all necessary items for the install, and it allowed me to put 16" tires with a heavier weight rating. Very pleased.




by:

ordering what i needed was a breeze with your wonderful staff
need part asap for equipment trailer for customer
and you made it happen thanks again from myself an my customer
tommy hudgins auto repair




by:

I thought there might be an issue with the parts because the old drum was an Axiletech. Measured everything and turns out it all fit PERFECT! Did have to use the old nut and cotter key due to no slot in the spindle. Other than that it's all good. Thanks for the proper parts for my trailer and good shipping.




by:

The confidence with part selection from the website put me at ease and made it easier for me to order these break parts.I am very pleased with the install videos and products.




by:

Delivered quick and timely. I was surprised to see how much better made this drum assembly was compared to the equivalent manufactured and sold by Lippert. Will be replacing the other three drums on our trailer with this Dexter drum assembly.




by:

Good quality and good service
OEM parts
that are affordable




by:

I ordered and it came in 2 business dsys




by: 03/03/2022

worthless customer service! Lied to me, no overnight. No follow up no communication. Very bad. They talk a good game until you need them then etrailer is MIA!




by:

The US made Dexter axle was worth the wait. The shipping through UPS was not the best experience for getting heavy items to Alaska. etrailer customer service was great at resolving the issues with UPS.




by:

I purchased 4 of these to convert a trailer to 8 lug rims. The kits arrived but one bearing was damaged prior to arrival. Carol shipped a new one no questions asked. Great customer service. Thank you.




by:

Shipped a few hours after ordering. It’s what I needed and got the job done!




by:

Very valued supplier with quality parts and excellent customer service!




by:

Great product and exact replacement for our 42ft Keystone Montana High Country 375FL.
Fast shipping and correct part is extremely important as we are full time RVers and with limited time.
I've ordered several items over the years and always received great service.




by:

These guy's at etrailer are hard to beat! Customer care is over the top. That's why Allison Creek does business with etrailer.




by:

Fast and efficient.




by:

The products were great. The only problem I had was I received all but 1 part. I called etrailer and the response was quick. My order some how got sorted into 2 orders. I was hoping to get all my brakes replaced at one time but not going to happen.




by:

Good service




by:

Excellent service. Had a small problem and it was handled quickly and professionally




by: 09/05/2021

Overall service was good but I had issues with some of my parts that were damaged during shipping or which were faulty. All issues were resolved and customer service reps were helpful. My only complaint is loss of time waiting on replacements to show up and waiting on the phone to speak to a rep.




by:

Great Product and delivered quickly!




by:

Great OEM product. Will purchase again when needed




by:

I ordered this as spare hub assembly for my 5th Wheel RV. We are leaving next month on a 5000+ mile, 3 month trip. I figure if I have a bearing go bad I can swap out the whole hub and be back on the road in no time. The hub is the same Dexter hub that I have on my rig now.
Shipping was fast and free, Helen was great, helping me find the part numbers of some of the other accessories that I needed to have spares of. Speaking of shipping I had checked other places for the hub and while the price was similar the freight charges were half the price of the hub. I will definitely be giving trailer my business going forward.


Comments
I havent had to use this Hub as of yet but, just having with me when we travel is comforting.
Andrew - 02/16/2020


by:

This is exactly what I need for an on-the-road repair! I ordered a second because I had a wheel-lug issue on I-95, and this kit got me rolling again! Thanks for offering a very complete setup at a great price. Finally, the free shipping is EXCELLENT! With some vendors "free shipping" means "you will receive it sometime next year." Not etrailer.com! Thanks!


Comments
Still going strong! Excellent value, quality, reliability!
Al - 03/31/2015

25
146
Show More Reviews

See what our Experts say about this Dexter Axle Trailer Hubs and Drums



  • Recommended Dexter Hub/Drum Assemblies for 5,200 lb and 6,000 lb Axles
    Some of the Dexter hub/drum assemblies are rated for 5200 lb axles and some are rated for 5200 to 7000 lb axles. The only difference is bolt pattern. There are 6 on 5-1/2 assemblies that will only be compatible with 5200 lbs where the 8 on 6-1/2 inch bolt pattern will stretch to the other weight capacities. The most common hub and drum for your axle size is the Dexter Trailer Hub and Drum Assembly - 5,200-lb to 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 # 42866UC3. If you have the EZ...
    view full answer...
  • Replacement Hub and Drum Assembly for Dexter D52 Axle on Big Tex Trailer
    The Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ is the correct one for your axle. It includes the hub/drum assembly complete with inner and outer bearings and races. New lug nuts, grease seal, grease cap, spindle nut and lock are also included.
    view full answer...
  • Picking Out Replacement Hub/Drum for 1998 Alpen Lite Stone Creek 36RL
    There's a chance the current 7k trailer axle hubs could fit in place of what you have but you'll need to measure your spindle to find that out for sure. Take your hub off and measure the spindle where the bearings and seal ride. If those dimensions are 1.25 inch, 1.75 inch, and 2.25 inch you could use a hub like the part # 42866UC3-EZ. If you find different dimensions let me know and I'll see what you'd need.
    view full answer...
  • Upgrading from 6 Lug to 8 Lug On Dexter 6K Axle
    In order to upgrade from a 6 on 5-1/2" bolt pattern to a 8 on 6-1/2" bolt pattern on a Dexter 6K Axle you'll need the Dexter Trailer Hub and Drum Assembly part # 42866UC3-EZ. The Dexter 5,200 lb - 7,000 lb axles all have the same size bearings.
    view full answer...
  • Rubbing Noise After Hub/Drum Install
    Thank you for the feedback, we sure do appreciate it! It's hard to say what the rubbing noise you are hearing is but I suspect the shoes on the backing plate are coming into contact with the drum which is completely normal but don't forget to adjust them prior to towing. I would then start with lubrication. In addition to packing each of the bearings before assembly you will also need to fill them with the right amount of grease. I would also make sure no dirt got into the grease and the...
    view full answer...
  • What Wheel Pilot Hole Diameter Fits Dexter Hub and Drum Assembly # 42866UC3-EZ
    According to my contact at Dexter Axle, their Trailer Hub and Drum Assembly # 42866UC3-EZ fits a wheel with a 4-3/4-inch pilot hole and a 8-on-6-1/2 bolt pattern. Each hub carries a 3500-lb rating.
    view full answer...
  • Spare Hub Recommendation for 2016 Keystone Outback with 5,200 lb Axles
    Since you have the EZ lube spindles the correct hub you'd need is the part # 42866UC3-EZ. The agricultural 42 spindle has the same dimensions as the non-agricultural spindle so either way this is the correct fit.
    view full answer...
  • Greasing Bearings and Hub for Dexter EZ Lube Hub and Drum for 5.2K to 7K Axles, 8 on 6-1/2
    If you have EZ lube axles then the hubs most likely use a double lip seal (which is what comes with hub # 42866UC3-EZ) that is going to be able to handle the use of a grease gun. But make sure to use a manual grease gun because the powered models do create much more pressure and can blow a grease seal. Make sure the grease used in the grease gun is the same as the grease used to pack the bearings or, if different, make sure they two greases are compatible. I have included a link to a helpful...
    view full answer...
  • How Tight Should Trailer Bearings Be When Installing on a Spindle
    Trailer bearings can fit pretty tight to the spindle, but they would not ever need to get pressed on. They should not be so tight that you have to really pound on them to fit but they can require a little bit of effort to get them to slide onto the spindle. When installed there should be no play between the inner surface of the bearing and the spindle. I have attached a link to a video that shows how to remove and reinstall trailer hub components you can check out.
    view full answer...
  • Should Grease Be Added to EZ Lube Trailer Hubs if the Bearings were Manually Packed with Grease
    On EZ lube hubs and axles you would want to add grease until it is full (when you see it flow out). When that happens it indicates that the proper amount of grease is in the hub. Having the bearings packed and the little bit of grease you have added is probably fine but it is better to be safe and fill 'em up!
    view full answer...
  • How Tight Should the Spindle Nut be on a Trailer Hub
    When installing the castle nut on the end of the spindle, there is no specific torque rating but it sounds like your might be a little too loose. The nut is ran down until there is no side to side play in the hub, and then backed off to the next notch in the castle nut so the tang washer or cotter pin can secure the nut. Over-tightening the castle nut can damage the bearings, races and spindle. If you click on the video link I provided, and fast forward to the 4:45 minute mark, you can...
    view full answer...
  • How to Pick Out New Hubs for a Construction Trailer
    In order to pick out the correct hub assembly for a trailer we are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. If you are looking for a different bolt pattern this step can be skipped for now. Next thing we will need to know is what spindle you have on your trailer. In order...
    view full answer...
  • Replacement Leaf Springs for 2012 Dutchman Voltage 3905
    In order to find the correct leaf springs for your 2012 Dutchman Voltage 3905 you will need to take some measurements and know the capacity of your axle. What you are looking for is the center of spring eye to center of spring eye measurement. In order to get the most accurate measurement ,the wheels of the trailer should be off the ground since the springs stretch when weight is applied. I have attached an image showing where you need to measure. If you provide me with this information...
    view full answer...
    Image 1 for
  • Pilot Hole Size of the Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ
    The Dexter Trailer Hub and Drum Assembly # 42866UC3-EZ fits a wheel with a 4-3/4-inch pilot hole and a 8-on-6-1/2 bolt pattern. Each hub has a 3500 lbs rating.
    view full answer...
  • Castle Nut Torque Spec for 7,000 Pound Trailer Axle
    There is no specific torque rating when reinstalling the castle nut after packing the bearings. You want to run the nut down until there is no side to side play in the hub, and then back it off to the next notch in the castle nut so the retainer can secure the nut. Over-tightening the castle nut can damage the bearings, races and spindle. I have attached a video showing this process. If you jump to the 4:45 minute mark, you can see the procedure outlined above.
    view full answer...
  • Trailer Hub that Fits 7k Axle with Bearing Numbers 25580 15123
    We have have the 7k trailer hub part # 42866UC3-EZ which would fit and work great on your current spindle. The bearing numbers may be slightly different but the fit on your spindle is exact same. This also has the same bolt pattern as what you have now too of 8 on 6-1/2 inch.
    view full answer...
  • Replacement Studs for a Trailer Hub and Drum Assembly # 42866UC3-EZ
    The replacement wheel stud you would need for your Trailer Hub & Drum Assembly # 42866UC3-EZ would be a Wheel Stud # 165995. Also, when you install the wheels onto your hubs you will want to torque them down to spec and then after 50-100 miles you will want to re-tighten them to the specified torque rating to prevent having the studs break in the future.
    view full answer...
  • What is the Grease Seal ID for the Dexter 7K Trailer Axle
    The Dexter Axle, # 8327834, uses a 2.25 ID grease seal. This is the case for pretty much all 7K axles out there. You typically see the 2.125 ID seals with 5K to 5.2K axles. If you ever need to replace your hubs in the future, we have the Dexter 7K Hub and Drum Assemblies, # 42866UC3-EZ, that fit this axle. I'm sure you've considered this already, but I like to point it out just in case, another important aspect that you will want to consider when replacing axles is to make sure the spring...
    view full answer...
    Image 1 for
  • Will Replacement Hub and Drum Assembly for Dexter 008-219-04 Fit Dexter Axle 8327834
    The Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 7,000 lbs # 8327834 will work with the hub and drum assembly you have described. This axle uses a # 25580 inner bearing and # 14125A outer bearing. The grease seal inner diameter should be 2.25" so that matches as well. It has a 7,000 lb capacity and a 5 bolt brake flange configuration. I have attached a review and installation video for your reference.
    view full answer...
  • What is the Depth of a 25580 Bearing?
    The dimensions of the Replacement Trailer Hub Bearing item # 25580 you referenced from the Dexter Trailer Hub and Drum Assembly item # 42866UC3-EZ are as follows. Inside diameter: 44.450mm / 1.7500 inch Outside diameter: 82.931mm / 3.2650 inch Width: 23.812mm / 0.9375 inch Cone width: 25.400mm - 1.0000 inch Cup width: 19.050mm - 0.7500 inch The depth of the bearing/cone width is 1 inch or 25.400 mm
    view full answer...
    Image 1 for
  • How to Pick Out Replacement Trailer for Shoreland'r Trailer
    In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. It sounds like you have the common 8 lug trailer wheel bolt pattern of 8 on 6-1/2 inch. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know is what spindle you have on your trailer....
    view full answer...
    Image 1 for
  • Hub And Drum Recommendation For Lippert Trailer 7000k Axle
    The Dexter E-Z Lube Hub and Drum assembly that would work for your Lippert axles with the bearing and seal numbers you provided is part # 42866UC3-EZ. This fits 5200 lb to 7000 lb axles that require a 2-1/4 inch ID grease seal. The drum dimensions for this measure 12 inches diameter by 2 inches wide. I spoke with my contact at Dexter and they told me they do not test fit their hubs and drums on other manufacturer axles. Based on the bearing and race numbers you provided this will work for you.
    view full answer...
  • Difference Between Hub/Drum # 8-219-4UC3-EZ and # 42866UC3-EZ
    The only difference between the two hubs is the inside dimension of the grease seal included with the hub drum. The # 42866UC3-EZ uses a 10-36 grease seal with a 2.25 inch inside diameter and the # 8-219-4UC3-EZ uses a 10-10 grease seal that has a 2.125 inside diameter. To determine which is compatible with your existing spindle, you will need to use a digital or dial caliper to measure the surface of the spindle that the grease seal rides against (see diagram). If this surface of your...
    view full answer...
    Image 1 for
  • Can a 6,000 Lb Dexter Drum Be Used On a 5,200 Lb Dexter Axle
    The LM67048 (5,200 lb Outer Bearing), 15123 (6,000 lb Outer Bearing), and even 14125A (7,000 lb Outer Bearing) all have the same 1.25" inner diameter so you can use any of them on a 5,200 lb axle. For this, I recommend the Dexter Trailer Hub and Drum Assembly part # 8-201-9UC3-EZ which has a 6 on 5-1/2" bolt pattern. If you want to go up to the 8 on 6-1/2" bolt pattern you would need the Dexter Trailer Hub and Drum Assembly part # 42866UC3-EZ which uses an 14125A outer bearing.
    view full answer...


< Previous
123. . .8



Do you have a question about this Trailer Hubs and Drum?


Used Items Available
Used Picture for Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs

Condition: Missing Parts

Notes: Item is missing all of the hdwr and bearings. Drum only. Otherwise new and unused.

Our Price: $99.85
Secure Checkout
Used Picture for Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
Used Picture for Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs

Condition: Missing Parts

Notes: Missing all Hardware, otherwise fine like new.

Our Price: $161.51
Secure Checkout
Used Picture for Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
Used Picture for Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs

Condition: Missing Parts

Notes: Missing all Hardware, otherwise hub fine like new.

Our Price: $161.51
Secure Checkout


  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Patrick B
Installed by:
Patrick B
Employee Randy B
Installed by:
Randy B
Employee Jacob T
Video Edited:
Jacob T
Employee Chad S
Video Edited:
Chad S
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L
Employee Mike S
Updated by:
Mike S
Employee Zach D
Video by:
Zach D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.