bing tracking image
  1. Trailer Lights
  2. Bargman
  3. Tail Lights
  4. Rectangle
  5. LED Light
  6. Red and White
Bargman LED Triple Tail Light - 5 Function - 36 Diodes - Rectangle - Black Base - Red/Clear Lens

Bargman LED Triple Tail Light - 5 Function - 36 Diodes - Rectangle - Black Base - Red/Clear Lens

Item # 47-84-009
Retail:$109.39
Our Price: $79.16
You Save: 28%
Trailer Lights
This item qualifies for Free Shipping
Shipping Weight: 1.89 lbs
Quantity: 
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
14-1/16" x 6-15/16" Rectangle. Triple LED trailer tail light serves 5 functions: brake, tail, turn, rear reflector, and incandescent backup. Durable plastic housing and lens. Recessed mount in horizontal position. 8-Wire design. Great Prices for the best trailer lights from Bargman. Bargman LED Triple Tail Light - 5 Function - 36 Diodes - Rectangle - Black Base - Red/Clear Lens part number 47-84-009 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (448)
  • Q & A (0)
  • Photos
  • Why etrailer?

Bargman Trailer Lights - 47-84-009

  • Tail Lights
  • Rectangle
  • LED Light
  • Red and White
  • 14L x 7W Inch
  • Recessed Mount
  • Stop/Turn/Tail/Backup
  • Rear Reflector
  • Non-Submersible Lights
  • Bargman

14-1/16" x 6-15/16" Rectangle. Triple LED trailer tail light serves 5 functions: brake, tail, turn, rear reflector, and incandescent backup. Durable plastic housing and lens. Recessed mount in horizontal position. 8-Wire design.


Features:

  • Triple LED trailer tail light serves 5 functions
    • Stop, tail, turn, and incandescent backup
    • Built-in reflex reflector removes the need for a separate reflector
  • Radius styling has smooth appearance with rounded corners
  • LEDs make great replacements for incandescent lights
    • Last 50 times longer
    • More efficient - provide brighter light with less power output
    • No bulbs to replace - no brittle filaments
  • Incandescent bulb for reverse light can be easily replaced
  • Durable plastic housing and lens
  • Red lens over white LEDs
    • Clear lens over incandescent bulb
  • Compatible with 12V DC systems
  • Recessed mount to trailer in horizontal position
    • Requires a 12-11/16" x 5-1/2" cutout
  • 8-Wire design includes power leads and ground wires
    • Wire functions are molded into the back of the light for easy reference
  • DOT compliant
    • Meets FMVSS/CMVSS 108 requirements


Specs:

  • Overall dimensions: 14-1/16" long x 6-15/16" wide x 2-1/4" thick
  • Diodes: 36
  • Power draw at 12V:
    • Stop/turn: 0.3 amps
    • Tail: 0.06 amps
    • Backup: 2.1 amps
  • Wire length: 8"
  • Wire gauge: 16
  • 1-Year limited warranty


Bargman 47-84-009 LED Triple Tail Light Dimensions

Recessed-Mount Light

Recessed-mount trailer lights install with a grommet, which is often sold separately. These lights extend past the trailer surface and require a hole for installation. If replacing a light, you can utilize the pre-existing hole. If installing a new light, you will need to cut a hole or use a mounting bracket (sold separately) to complete the installation.



47-84-009 Bargman LED Triple Tail Light - 84/85 Series - Stop, Tail, Turn - Incandescent Backup - 36 Diodes - Horizontal - Black Base - Red and Clear Lens - Recessed Mount




California residents: click here


Customer Satisfaction Score:


Customer Reviews

Bargman LED Triple Tail Light - 5 Function - 36 Diodes - Rectangle - Black Base - Red/Clear Lens - 47-84-009

Average Customer Rating:  4.8 out of 5 stars   (448 Customer Reviews)

14-1/16" x 6-15/16" Rectangle. Triple LED trailer tail light serves 5 functions: brake, tail, turn, rear reflector, and incandescent backup. Durable plastic housing and lens. Recessed mount in horizontal position. 8-Wire design.

by:

I first ordered and didn't realize they were sold individually. So I did order another one. They are a replacement for the original style lights that were not LED. They fit perfectly and are really bright. I soldered and heat shrinked all the wiring and installed butyl tape when I installed them. I did order the metal resistors so that I didn't have the hyper flash. They renew the look of an older RV. The shipping was two days and I loved that.


Comments
Still working as advertised and would still recommend them. Excellent product.
Hoppers - 12/29/2018


by:

Replaced all of the old incandescent tail and third brake lights on the rear of my old trailer. The installation was easy and only took a couple of hours. All the mounting holes lined up and it was a direct replacement. The trailer is considerably brighter now with 1/4th of the current drain. Now the trailer lights up like the Christmas Coca-Cola trucks. Trailer is much more visible at night and in the daytime making traveling much safer. I would recommend this upgrade for anyone having older trailers with the incandescent lighting.




by:

They need to be sealed. You resistors did not work for me for the blinkers. Kragen auto had a heavy duty flasher I ordered and it worked and was much easier and cleaner install then all the resistors that didn’t work.




by:

After 30+ the incandescent bulb units were dying. They still worked ok, but the housing was cracking where it screws in. I was grateful these were still made, and opted to go with these LED units over another set of incandescent ones. They're nice and bright, dropped right in, and no complaints 1 year on.




by:

The backup light on my RV went out. The problem was a rusted bulb socket. I would have to replace the whole tail/backup/brake assembly. SO......I decided to "go LED" and order the Bargman Triple Tail Light 84 series from etrailer. The order was processed and delivered quickly. There was a bit of work to modify the existing cutout to accept the new Bargman Triple Tail Light. But I think it was worth it. I also installed the LED Backup Light Upgrade Kit to the Triple Tail Light. These really look good on the MotorHome and I should not have to work on them again. The picture shows the old and the new installed for comparison.




by:

We have an older camper that we wanted to update the taillights on. We bought the resistor's in case of hyperflash, but didn't need them. We LOVE the difference in the lights! We had no issues with replacing the lights, the dimensions were a perfect fit!




by:

Excellent product, have not had any issues at all. They are bright lights that make it very visible to be seen. Only small issue is that my flashers blink a little faster than normal but I’m fine with that.


Comments
Great best purchase I could have made. Very satified
Larry - 01/10/2022


by:

No instructions just black green and white wires

Very disappointed


Comments
We do not have any physical instructions of these lights. However, these lights do have details [color wire and function] molded into the back of the lights.
-- Etrailer Expert Katrina B - 04/14/2022


by:

The LED units installed easily and are brighter than the old incandescent ones. Moisture entering the old units corroded them. This should avoid that problem. They look nice.




by:

Excellent replacement and addition with LED brightness.




by:

We really like them, they are bright and improve the looks of our motorhome. They fit perfect and were easy to install also.




by:

One of the bezels has a crack in it, please advise. Richard Fields




by:

You folks always have what I need, and get it delivered really fast.
Thank You




by:

Bought these light for a 1997 dynamic wrecker, perfect fit and look great. Couldn't get the lights from dynamic anymore and the lights that were on the truck when I bought it were busted up halogen.




by:

Fantastic lights! Very bright!




by:

Love this taillight!!! The price was great and it was easy to install-I had a neighbor help and we did it in 30 minutes.




by:

well-constructed




by:

I'm very satisfied with my Bargman LED 84/85 Series trailer light. They are super bright and easy install. I've had them installed on my '94 class C RV for over a year and they are still as bright as the day I installed them. Since my current tail light assembly was same 84/85 series but incandescent and this LED Kit was an upgrade same series it was a direct fit. However since my vehicle was originally set up with incandescent bulbs front and back and now has the LED rear I had to replace vehicle's flasher relay to get rid of Hyper flash/bulb out fast blink indication. Now it flashes like it did before the replacement and I don't ever have to worry about corrosion on socket or bulb out again for a long time. Trip to Oreilly auto parts and under $4 for the upgraded flasher relay that handles both LED and incandescent lights in same circuit and hyper flash is gone. Other reviews suggested installing load resistors but there are 2 reasons why I didn't do that. Reason 1) load resistors get hot, by nature resistors resist current (hence their name) but get hot its same thing a light bulb does but we use that heat to create light by heating up filament that glows. I didn't have anything to mount the load resistors to but wood and didn't want to set my coach on fire. Reason 2) LED are low power draw on circuit and only require .5 volt to operate. I didn't want to load down my vehicles alternator unnecessarily by throwing in 6 large resistors (since I have 2 triple tail light assemblies it would require 6 resistors) that do nothing more than electrically slow down or throttle down current flow. The other thing extra resistance does in the circuit is to dim lights because there's less current flowing through the light filament it won't glow as bright because there's less current flow than before. I didn't want to spend money to dim the lights that I spent extra money to make them brighter and therefore more noticeable for the brainless, texting, snot tailgating me to not see when I put on the brakes. I hope this quick electrical 101 lesson helps others in their decision since none of the reviews mentioned upgrading the flasher relay too.




by:

I installed on my 2003 Coachman Leprechaun as I changed all lighting to LEDs. They work great and much brighter than my old lights. My ammeter hardly indicates a load when I turn my lights on. No more bulb replacement for me and no carrying spare bulbs everywhere I travel.




by:

I give e- trailer a 5. You all were great, keeping me informed on the status of my order. My disappointment is that Bargman does not provide a seal with the light or sell them separately.




by:

Just got around to installing the new Bargman tail lights on my 1995 Dolphin motor home. The turn signals flash very rapid and I believe I would need to install a resistor to cure this. Can you point me in the right direction ???


Comments
Yes you will need load resistors, one for each turn signal circuit. I recommend part P230004A-2.
-- Etrailer Expert Heather A - 01/16/2019


by:

Once again etrailer provided perfect service!!! Their prices are great and shipping is super fast. On top of that, their customer service and technical support is second to none. I have been a long time customer and have never been disappointed.

I had already purchased two of these taillights awhile back to replace the old incandescent taillights on my truck camper. I needed another to mount on a storage box, that I am mounting on the back of my truck camper, since storage box is going to cover the camper's existing taillight. These led taillights are a vast improvement over the the old ones!!! Much brighter and gives our rv a more modern, updated look.




by:

The LED taillights arrived in very good time and were in good condition. Easy install, and the lights on the camper work well and are much brighter and easy to see than the old incandescent lights. I have bought a couple items from Etrailer and the website and service has been good each time. It's a pleasure dealing with this company.




by:

Great Product. Easy replacement for older RVs to upgrade to LED. You will need load resisters to prevent hyperflash turn signals. No biggie. Very bright and really quick shippers here.


Comments
Where are the load resisters purchased from and what is the load of the resister?
-- comment by: Steven R - 10/27/2014

How many load resistors do you need for each unit?
-- comment by: Glen - 08/02/2015


by:

Great product works great easy to install E trailer is a pleasure to deal with



25
448
Show More Reviews

See what our Experts say about this Bargman Trailer Lights

  • How to Wire in a Bargman Triple Tail Light into Trailer Wiring
    The Bargman Triple Tail Light # 47-84-009 that you referenced will install without a problem on your trailer. The 2 solid red led lights have three circuits that run to them. The black wire is stop and turn, the green wire is tail light and the white is ground. The ground circuits of all the lights are wired together into one wire. You will need to run that wire to a clean metal surface on your trailer frame. The reverse light has its own black wire that will get run to the reverse circuit...
    view full answer...
  • Mounting Options for the Bargman 84, 85 Series Triple Tail Light
    Yes, the Bargman Triple Tail Light, # 47-84-009, can be mounted vertically. There are some triple tail lights that can only be mounted horizontally and that is due to the lens for the backup light. Luckily, this tail light uses a backup light lens that allows for vertical and horizontal installation.
    view full answer...
  • Recommendation For New Brackets For Rear Tail Lights For 1984 Coleman Sequoia Pop Up Trailer
    As far as new brackets, I do not have them per se but we do have replacement tail lights. I am not sure what your dimensions are but your tail light looks very similar to The Bargman Triple Tail Light, Item # 47-84-009. This light has brake, tail, and turn lights with long-lasting LEDs. The dimension are 14-1/16 inches long x 6-15/16 inches wide x 1-1/4 inches thick. It has a black base, a 2-wire design, and a recessed mount. To take off bracket/tail light assembly, remove the screws...
    view full answer...
    Image 1 for
  • Does Mounting Hardware Come with Bargman Triple Tail Light 47-84-009
    Hardware is not included with the Bargman triple light part # 47-84-009. You would need to supply by picking out the best setup for your trailer.
    view full answer...
  • How Far Out Does Bargman Triple Tail Light 47-84-009 Stick Out from Mounting Surface
    I went out to the warehouse to measure Bargman Triple Tail Light - 84, 85 Series - Red LED, Incandescent Backup - Black Base Item # 47-84-009. I found that the 1-1/4 inch depth is in fact that part that sticks out from the mounting surface. I have included a link to a video review of this light for you.
    view full answer...
  • Do Two Lamps on the Bargmann # 47-84-009 Act As Stop/Turn, Brake and Running Lamps
    That's correct. The lamp on the right operates as a reverse lamp, while the lamp in the center and on the left act as three function lamps (stop, turn signal and running lights).
    view full answer...
    Image 1 for
  • Will Bargman Triple Tail Light 47-84-009 Fit a 2015 Itasca 22R RV
    I looked up pictures of the 2015 Itasca Spirit 22R and the lights are almost exactly like # 47-84-009. The only difference is light # 47-84-009 has the reverse light at the end whereas the pictures on the RV I saw it was in the center but that won't matter. This is a recessed mount meaning that it fits in a hole in the trailer. The hole for light # 47-84-009 needs to be 12-11/16 inches long by 5-1/2 inches wide. If that is the hole size (or close to it) on your Itasca then you can use...
    view full answer...
  • Quantity of Bargman Triple Tail Light # 47-84-009
    The Bargman Triple Tail Light, part # 47-84-009, are sold individually. You'll need to order two of them to get a pair.
    view full answer...
  • Recommended Replacement for Triple LED Trailer Tail Light 328-003-30LEM2
    The Triple LED Trailer Tail Light part 328-003-30LEM2 is no longer available from the manufacturer but we do have a very similar option you can use, the Bargman LED Triple Tail Light part # 47-84-009 which is what I recommend.
    view full answer...
  • How Does Bargman LED Triple Trailer Tail Light # 47-84-009 Wire Up
    There are three colors of wires on the backside of the Bargman trailer taillight kit part # 47-84-009. There are the white wires which are for the ground circuit, the green wires which are for the taillight circuit, the black wire that's for stop/turn except for the black wire behind the panel that has the clear lens. That goes to the reverse light circuit.
    view full answer...
  • Replacement Light Assembly for Trailer with 84 Series Lights
    We do carry replacement light assemblies for your Bargman 84 Series lights. For a 2 panel light we have the part # 47-84-610 which has LED lights. For a three panel light we have the part # 47-84-009.
    view full answer...
  • What Type of Light Assembly Does the Bargman LED Upgrade # 47-84-026 Fit
    The dimensions of the Bargman LED Upgrade # 47-84-026 that you referenced is 11" long x 6" wide x 2-1/2" thick. If you have a Bargman 84, 85 or 86 Series RV light this would work well for you. If what you have looks similar to the # 47-84-009 this should work for you. It would replace one of the panels of this kit.
    view full answer...
  • Upgrading Reverse Light Panel of Bargman Triple Light part # 47-84-009 to LED
    If you wanted to upgrade the Bargman triple light part # 47-84-009 to an LED all you need is the part # 47-84-026 which replaces the entire panel with an LED panel like what you see in the attached picture.
    view full answer...
    Image 1 for
  • Comparing Bargman LED Triple Tail Light 47-84-009 to 47-84-005
    The Bargman LED Triple Tail Light - 5 Function - 36 Diodes - Rectangle - Black Base - Red/Clear Lens Item # 47-84-009 has 2 differences from the LED Triple Trailer Tail Light - 4 Function - 36 Diodes - Black Base - Red, Amber, and Clear Lens # 47-84-005. The differences are in the # 47-84-009 having the red turn signal and dual running and brake/turn functions and obviously the # 47-84-005 having the separated out turn signal that is amber in color. I've attached videos to show these...
    view full answer...
  • Replacment LED Module Recommendation for an 84 Series Bargman Trailer Light
    For a replacement LED module for the # 47-84-009 you would want the part # 47-84-420.
    view full answer...
  • Recommended Wiring Scheme for 3-Light Taillight Assembly on Re-Wired 1977 Airstream Trade Wind
    Thank you for the photo of your Airstream's tail light assemblies. Since your Airstream trailer's wiring has combined stop and turn signals carried on the same wire you will need a vehicle-to-vehicle converter # 118158 to separate them out for routing to individual light assemblies. This Tow Ready harness installs in between the existing wiring and the lights. Right turn and stop signals will enter the converter on its left (input) side on the green wire; left turn and stop signals will...
    view full answer...
    Image 1 for
  • Options for Replacement LED Tail Lights for 2001 Allegro Bus Motor Home
    We have some light options that may work for you to convert your 2001 Allegro Motorhome's taillights to LED, but the lights do not come in a kit specifically designed for you to convert your RV's lights to LED. Based on the photos I was able to find of your Allegro's taillights, the closest options for you are lights like the Bargman Triple Tail Light # 47-84-009 or the Triple Tail Light # 47-84-005. These lights offer only 3 lights where I found the 2001 Allegro to have 4 lights on each...
    view full answer...
  • Replacement Tail Lights for a 2017 Thor Quantum 31WS Class C Motorhome
    If you want to swap out your current tail lights on your 2017 Thor Quantum 31WS with the Bargman Triple Trailer Tail Light # 30-84-509 then you can, but if the bolt holes don't match up you may need to drill new holes. Attached is a photo showing the dimensions of where the bolt holes line up. You might also consider the Bargman # 47-84-009 LED triple tail lights measuring 14" x 7" with 36 diodes. If neither of these options matches very well with what you already have and you would...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Lights for 1987 Odyssey RV
    Yes, we have what you need; the Bargman LED Triple Tail Light # 47-84-009 is the correct replacement. The difference between # 30-84-509 and # 47-84-009 is that # 30-84-509 uses incandescent lighting, while # 47-84-009 uses LED lighting which will provide the brighter lights as requested. Both options will work for your vehicle, and do retain the 8 wire design you currently have.
    view full answer...
    Image 1 for
  • Wiring Bargman Triple Tail Light # 47-84-009 to 1973 Argosy 24 Twin
    The Bargman 84 Series Taillight you mentioned, part # 47-84-009 would wire as follows: The white wire is grounded to the trailer frame. The black wire behind the reverse lamp would connect to the reverse lamp lead on the trailer. The black wire from the center lamp connects to the turn signal/brake circuit. The green wire from the center lamp connects to the running light circuit. I do not have any wiring diagrams specific to the Argosy 24 trailer you have, but the description above coupled...
    view full answer...
    Image 1 for
  • Gasket Availability for the Bargman Triple Tail Light # 47-84-009
    The best recommendation I could make would be to use a gasket maker like the Loctite Silicone Gasket Maker part # LT37464. I wish we carried a gasket specifically designed to work on the Bargman Triple Tail Light # 47-84-009 that you referenced but we do not. I have spoken to my contact at Bargman about this before and they told me that gaskets aren't used for these assemblies because if they are used they can trap condensation in the lens and it won't dry out. Without the gasket air...
    view full answer...
  • 3 Panel 84 Series Taillight for RV with Clear Backup LED Lens
    The Bargman Triple Taillight 84 Series part # 47-84-009 is a 3-panel taillight that has a reverse light panel with a clear lens. To swap the reverse part out to LED you'd just need the part # CM93226. If you are referring to the similar one in our reviews where the whole panel is clear we don't have that.
    view full answer...
    Image 1 for
  • LED Corner Lights Won't Come on with Load Resistor Installed
    Load resistors are used on LED vehicle lights to prevent hyperflashing on turn signals. Make sure you only have the load resistor installed on the turn signal wires as they are the only lights that will be flashing. I attached a useful diagram to reference while making sure your load resistor is installed correctly. Additionally, you could have a loose or weak ground connection. Clean the area near your ground connection to remove any corrosion and replace any corroded ground screws....
    view full answer...
    Image 1 for
  • Recommendation For Tail light And Marker Light LED Upgrade
    Thanks for the information you sent. I did some research on your 1977 Great Divide Camper Trailer and have a few recommendations for you to consider. My recommendations are not exact matches but I believe they will work for you. For the tail light assembly, I recommend the Bargman Triple Tail Light, Item # 47-84-009. This light is 14-1/16 inches long x 6-15/16 inches wide x 1-1/4 inches thick. It is a recessed mount that has 2 red LED lights and 1 incandescent reverse light for your...
    view full answer...


< Previous
12



Do you have a question about this Trailer Light?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer light information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Victoria B
Expert Research:
Victoria B
Employee Lindsey S
Written by:
Lindsey S
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Brian T
Updated by:
Brian T
Employee Manda E
Updated by:
Manda E
Employee Kathleen M
Installed by:
Kathleen M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010