bing tracking image
  1. Hitch Adapters
  2. Reese
  3. Hitch Reducer
  4. Fits 2-1/2 Inch Hitch
  5. No Extension
  6. 2-1/2 Inch to 2 Inch
Reese Titan Reducer Sleeve 2-1/2" to 2"

Reese Titan Reducer Sleeve 2-1/2" to 2"

Item # 58102
lowest price pledge
Our Price: $37.22
Hitch Adapters
Orders above $99 qualify for Free Shipping
Shipping Weight: 3 lbs
Reese Hitch Reducer - 58102
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Bushing reduces Titan Class V receiver opening (2-1/2" x 2-1/2") to a Class III or IV receiver opening (2" x 2"). 1-800-496-5010 to order Reese hitch adapters part number 58102 or order online at Free expert support on all Reese products. Guaranteed Lowest Price and Fastest Shipping for Reese Titan Reducer Sleeve 2-1/2" to 2". Hitch Adapters reviews from real customers.
  • All Info
  • Reviews (241)
  • Q & A (0)
  • Photos
  • Why etrailer?

Reese Hitch Adapters - 58102

  • Hitch Reducer
  • Fits 2-1/2 Inch Hitch
  • No Extension
  • 2-1/2 Inch to 2 Inch
  • Bike Racks
  • Cargo Carriers
  • Hitch Mounted Accessories
  • Reese

Bushing reduces Titan Class V receiver opening (2-1/2" x 2-1/2") to a Class III or IV receiver opening (2" x 2").


  • Adapts a 2-1/2" x 2-1/2" hitch receiver opening into a 2" x 2"
    • Works with factory-installed and after-market trailer hitches with a 2-1/2" square receiver opening
      • To use with Ford Super Duty pickups, modification may be required
  • Allows you to use your 2" towing and hitch-mounted accessories

Note: Ford OEM hitches have a tighter/different radius on their 2-1/2 inch receiver tubes. To accommodate the OEM Ford 2-1/2 inch hitch, the corners of a ball mount, shank or reducer sleeve may need to be sanded down to slide into the hitch. Do not remove any more material than necessary. Simply removing the paint or powder-coat is often sufficient.

Never use a grinder to knock-down the corners, which may remove too much material and will also heat the accessory and could compromise the product's structural integrity. This is especially the case with cast accessories like larger weight distribution shanks.

Product Detail

58102 Reese Titan Reducer Sleeve 2-1/2" to 2"

California residents: click here

Customer Reviews

Reese Titan Reducer Sleeve 2-1/2" to 2" - 58102

Average Customer Rating:  4.7 out of 5 stars   (241 Customer Reviews)

Bushing reduces Titan Class V receiver opening (2-1/2" x 2-1/2") to a Class III or IV receiver opening (2" x 2").


This ain't pretty. But size does matter. The 58102 2" X 2 1/2" receiver adapter hits the spot. It fits nicely into the 2 1/2" receiver with, at most, 1/8" space "slap" room. It's almost full length front to back inside receiver providing plenty of support for my 2" weight distribution system without slap. I have not hooked up my Forest River 29'4", 10,7 75 lb. GVWR Puma tow behind R/V but I do not have any fear of this well constructed, perfect fitting receiver adapter. The people at etrailer are there, willing and able to assist you. I have personally found that, if the C.S. Rep doesn't know the answer, she/he will find the answer and report back to you, in my case within minutes. My purchase was delivered (snail mail) within 5 days and In excellent condition. I will report back shortly after a trial run hooked up.


It does the job its supposed to do. Wish I’d bought the kind with a flange (right word?) end. It’s quite a challenge to get the holes to line up when both the tongue and sleeve can move.


Wish these adapters were longer, but it gets the job done with some extra rattle from the sloppy fit. It will get me by till I get a better fitting 2 1/2" draw bar.

Thank you for your review. All adapters will fit a little differently depending on the powder coat finish. Sometimes even, there is too much and it needs filed. In your case because you have some play you can always pair it with an anti-rattle device.
Sierra K - 04/21/2021


This reducer sleeve was exactly what I needed to assure I had the proper hitch setup between my truck and travel trailer camper.


works as advertised nice and snug


Works as described and designed, no iss ues


As has been widely reported this thing does not fit "snugly" into the 2 & 1/2" hitch receiver. Because the reducer sleeve is not a "snug" fit it rattles around a bit and is showing signs of wear around the pin hole. Fortunately I bought a 2 & 1/2" shank instead of relying solely on the reducer.


straightforward basic product


This reducer is perfect for reducing a 2.5 inch receiver down to a 2 inch. It works perfectly as designed.


As advertised.


Delivered on time and exactly what I or dered


As described


What's to say it's a square piece of metal with a hole in it.I have not seen any better.


This fits a Curt 2 1/2 receiver perfectly. Allows me to use receiver with my various drawbars for different trailers when I am not using the Forklift hitch box extension.

Fine sold the truck to neighbor who makes good use of it with camper.
Richard E - 07/25/2018


Simple product, works well, has help up.


Over the last couple of years, I have purchased different parts for my towing needs from The parts have ranged from hitch adapters to trailer tires. The customer service from Crystal K., and the quality of the products from have all been the very best that you could expect. I highly recommend that you at least consider for anything that you may need when you are towing or RV'ing.


This is just perfect. When I bought my new truck I was very surprised that I now had a 2-1/2 inch hitch receiver. Of course my 2 inch hitches and accessories didn't fit plus I had to get another receiver pin to fit the 2-1/2. I will have to say etrailers on-line was a great experience. They had what I needed and the prices were very reasonable. Thanks. I will definitely be back for more trailer accessories.


Reducer worked great for my GMC 2 1/2 inch hitch. Received Blue Ox Sway Pro WD 2" hitch with no problems. Used the 2 1/2 inch hitch lock to secure everything in place. Very little movement and fit snug as a bug. Great Product. Fast Shipping. As always Amazing customer service!


I ordered 2 hitch adapters (sleeves) an a hitch pin from etrailer over the phone because I could not find mine and I wanted to get these shipped quickly before I left on my hunting trip a few days later. I called late in the day, about an hour before closing, but Cathy still worked magic and got my shipment put together and on the truck that night! My items arrived a couple of hours before I planned to leave. Cathy saved the beginning of my trip!

For the review of the 2 square pieces of metal tubing --- they worked great :-). This review is for the outstanding customer service I've experienced each time I've ordered anything from, but especially this time from Cathy.


The part itself is just like the way it was described. I have a 2011 F-250, I read in the reviews that the piece wouldn't slide in unless some of the corner were ground down, with this information I didn't think it would be a big deal. I have not used it yet. I slid the part into my hitch and it fit, in my opinion a little too loose, I also slid it into my reciever and it too seemed a little too loose fitting. May have to buy a 2 1/2 receiver instead.


The part fit up in a 2 1/2" receiver on a F250 without issue, despite multiple reports that some massaging might be needed to fit the factory hitch. Normally, I would give this 5 stars and the product, while not complex, works as advertised. The 4 star rating is due to the country of origin - China.


Have used the adapter for a year now and have had no issues. The unit wiggles a little when in place but I image that is necessary for it to slide into place correctly. The unit does not wiggle once connected to the trailer and I can't hear any noises coming from the hitch when towing. I would buy this unit again.


I bought this to use a bike carrier in my 2 1/2 inch Curt hitch receiver. Fit perfectly on the bike carrier and into the 2 1/2 inch receiver. Katie D. did a great job making sure that it would fit without potential modification warned for Ford factory hitches.


Package arrived late. It took longer to get from the UPS center which is less than 5 miles away than it did to get from the original location.


Purchased this item for my new 2011 F250 that, following the big 3 towing wars, now coms with a 2.5" reciever. This will not fit into stock 2.5" recievers as it has a heavy coating of paint. Be ready to grind paint off to get it to fit into your reciever! We'll see how long it lasts uncoated.

Newer Ford 2.5 inch receivers use a tighter corner radius than most so these adapters often need to have the finish removed at the corners to fit.
-- Etrailer Expert Patrick B - 11/21/2012

Show More Reviews

See what our Experts say about this Reese Hitch Adapters

  • What Part Do I Need to Reduce My Titan 2-1/2 Inch Hitch to a 2 Inch Opening
    We do offer a reducer that will allow you to use a Class III or IV accessory in a Class IV 2-1/2 inch receiver. The Draw-Tite Reducer Sleeve, part # 58102 would work well for you. The outside dimension is just a bit less than 2-1/2 inches, to allow for easy installation and removal. The inside dimension would be a bit larger than 2 inches to allow easy installation and removal of the hitch accessory. Ford OEM 2-1/2 inch receivers have a tighter/different radius on their 2-1/2 inch receiver...
    view full answer...
  • Bike Rack for a 2003 Lexus LX470
    Unfortunately, this reducer sleeve is designed for large 2-1/2 inch x 2-1/2 inch receiver hitches normally found on super-duty pickup trucks. If you already have a hitch on your LX470, it is most likely a standard 2 inch x 2 inch receiver. All of the trailer hitch receivers we offer for your 2003 Lexus LX470 are 2 inch Class III receivers. This means that any 2 inch hitch mounted bike rack should work with your hitch.
    view full answer...
  • Fit Issue With Reducer Sleeve # 58102 On A 2011 Ford F350 Super Duty With OEM Hitch
    It has come to our attention that there are fit issues with 2-1/2 inch accessories and 2-1/2 inch OEM Ford hitches. Ford uses a tighter/different radius on the inside corners of their 2-1/2 inch receiver tubes. Some accessories will drop in just fine, but fairly often the accessory will not fit in the hitch, be it a WD shank, reducer sleeve, or draw bar. To accommodate the OEM Ford 2-1/2 inch hitch, it is fine to sand the corners of a ball mount or shank down to get it to slide into the...
    view full answer...
  • Titan Reducer Sleeve Part # 58102 for 3/4 Ton GMC Sierra
    This reducer sleeve will work fine on your Class V 2-1/2 inch receiver. We are located in Wentzville, Missouri but we can ship the item to you with no problem.
    view full answer...
  • Hitch Receiver Reducer for Towing a Horse Trailer With Ford F350
    It is perfectly safe to use a reducer like the # 58102 you referenced. Using the reducer will not reduce the amount of weight the vehicle can tow, but a ball mount for a 2x2 receiver would typically has a lower towing and tongue weight capacity than a ball mount for a 2-1/2x2-1/2 receiver would. Just be sure that the weight of the fully loaded trailer does not exceed the weight of the lowest rated component of the towing system, like the hitch, ball mount, trailer ball, etc. If your 2-1/2x2-1/2...
    view full answer...
  • Will a 2-1/2 Inch to 2 Inch Trailer Hitch Receiver Reducer Sleeve Fit a 2005 Ford F-350 Super Duty
    The overall length of the Reese Reducer Sleeve, # 58102, is 5-3/4 inches. The distance from the back to the center of the hitch pin hole is 4 inches. It is designed for factory installed and aftermarket trailer hitches with a 2-1/2 inch receiver. If your 2005 Ford F-350 has a 2-1/2 inch receiver then this sleeve should fit. I recommend taking some measurements of your hitch and comparing them to those on the product page to determine fit.
    view full answer...
  • Will Reese Trailer Hitch Reducer 58102 Fit a 2-1/2 Inch Trailer Hitch
    If you have a Class III trailer hitch, then it will have a 2 inch receiver opening. When you measure the receiver, make sure that you are measuring just the width of the opening and not the outside dimensions. Take a look at the FAQ I have linked for some additional information. If you do have a 2-1/2 inch Class V trailer hitch, then you could use the reducer sleeve, # 58102. But, I am confident that you have a 2 inch receiver. I have included a link to all of the trailer hitch mount bike...
    view full answer...
  • Using 2-1/2 Inch to 2 Inch Receiver Reducer # 58102 to Flat Tow Vehicle
    A hitch reducer like the Draw-Tite # 58102 can be used to reduce your hitch opening from 2-1/2 inches to 2 inches so it will accept the shank of your Alpha Tow Bar and allow you to safely tow your Saturn Ion.
    view full answer...
  • Hitch Adapter Recommendation for a Class V Hitch so that it Can Be Used with 2 inch Accessories
    It sounds like you have a Class V hitch with a 2-1/2 inch opening on it. 2 inch hitches are more common so if you wanted an adapter to let you use 2 inch accessories the part # 58102 would be what you would need. I attached a couple FAQ articles to the right that explain the differences between the hitch sizes and the classifications.
    view full answer...
  • Does Reducer Sleeve Come All The Way To End Of Receiver?
    On the Reese Titan Reducer Sleeve 2-1/2" to 2" # 58102, sometimes it goes all the way into the receiver opening and sometimes it stops about half way. This placement depends on the type of hitch and the placement of hole in the reducer sleeve and the hole in the ball mount. I have a video attached that shows the various placements when using the reducer sleeve.
    view full answer...
  • Sleeve for Weight Distribution System When Going From 2" to 2-1/2" Hitch Receiver
    There is a sleeve that will work with a Reese weight distribution system, the Reese Titan Reducer Sleeve 2-1/2" to 2" # 58102. I've attached a couple review videos of this product for you to take a look at as well.
    view full answer...
    Image 1 for
  • Does Using a Reducer Sleeve that Overhangs a 2-1/2 Inch Trailer Hitch Reduce the Towing Capacity
    It is normal to see some overhang when using a reducer sleeve such as # 58102. A reducer sleeve should not reduce the tongue weight or towing capacity of the hitch. However, if your trailer hitch is a factory hitch check the owners manual of the vehicle to determine if there are any special provisions mentioning a reducer sleeve.
    view full answer...
  • Can Reducer Sleeve be Used with a Weight Distribution System
    Yes, you most certainly can simply use a reducer sleeve as opposed to a new shank for your Weight Distribution (WD) setup. I recommend the Reese Titan Reducer Sleeve # 58102 which will reduce your 2-1/2" hitch receiver opening to a 2" opening so that your current WD Curt WD system is compatible with your Ram 2500.
    view full answer...
  • Weight Distribution Shank Recommendation for 2-1/2 inch Hitch
    I have a better solution for you than a sleeve adapter. What would be better for you would be a weight distribution shank that is designed for 2-1/2 inch hitches like the # EQ90-02-4800. The great thing about weight distribution shanks is that they all fit each others systems since they are all made to the same specs. We have sleeve adapters like the part # 58102 but they may add more movement than you'd like.
    view full answer...
  • Adapter Recommendation for Going from a 2-1/2 inch Hitch to a 2 inch Hitch
    We have exactly what you would need. For a reducer to go from a 2-1/2 inch hitch to a 2 inch hitch you will want the part # 58102. I attached a review video for you to check out as well.
    view full answer...
  • Recommended Reducer Sleeve For 2-1/2 Trailer Hitch Receiver To Use 2 Inch Hitch Cover
    If your son has a Class lV or V trailer hitch on his new Silverado, he may indeed have a 2-1/2 inch opening on his hitch. All of the hitch covers we offer with the New England Patriots Logo on them are designed to fit trailer hitches with a 2 inch receiver opening, but there is an option for you. I recommend using a reducer sleeve like part # 58102. You insert this into the 2-1/2 inch receiver on the hitch and then you can attach any of the 2 inch hitch covers in the link I have provided.
    view full answer...
  • Availability of Adapter for 2-1/2 inch Hitch to Convert to 2 inch Hitch
    Yes, you can do exactly what you are looking to do with the adapter # 58102 which is designed to fit into a 2-1/2 inch trailer hitch and give you a 2 inch hitch opening.
    view full answer...
  • Can Reese Titan Reduce Sleeve be Used with Weight Distribution
    The 7028700 reducer is a Reese Towpower product which we don't carry. It's a sister company to the Reese we do carry so there are a lot of similar products between the two. The Reese Titan reducer, part # 58102, being a prime example. I've reached out to Horizon Global (The parent company to both Reese and Reese Towpower) before about these specific products and they weren't able to give me an actual difference between the two but they definitely assured me that the # 58102 reducer is...
    view full answer...
  • What is the Difference Between the Reese Towpower 7028700 and the Reese Titan 58102
    The biggest difference between the Reese Towpower 7028700 and the Reese Titan Reducer Sleeve # 58102 is that the Titan can be used with a weight distribution system while the Towpower comes with a sticker that says it isn't rated for weight distribution. Essentially they do the same thing (reduce a 2-1/2" receiver opening to a 2") but when we have spoken with Horizon Global (the parent company to both Reese and Reese Towpower) in the past they weren't able to confirm why one was rate for...
    view full answer...
  • Is There a Sleeve For my 2-1/2 inch Ford F350 Super Duty Hitch So I can Use 2 Inch Accesorries
    2-1/2 inch hitch opening are used on hitches that are Class V, and are designed to haul large heavy trailers. In order to reduce your hitch down to a 2 inch diameter opening on your new Ford F-350 Super Duty you would need to purchase a Titan Reducer Sleeve 2-1/2 inch to 2 inch, part # 58102. You should take note that Ford OEM hitches have a tighter/different radius on their 2-1/2 inch receiver tubes. To accommodate the OEM Ford 2-1/2 inch hitch, the corners of a ball mount, shank or...
    view full answer...
  • Ball Mount Options for a 2014 Ram 2500 With OEM Class V Trailer Hitch
    Most of the domestic truck manufacturers are putting Class V trailer hitches with a 2-1/2 inch receiver on their 3/4 ton trucks, including Dodge. This is mainly because they are building their trucks stronger and stronger each year and they need to install the equipment that can handle the higher capacities. You have a few different options when it comes to ball mounts and hitch balls. If you want to use your current equipment, you could use a reducer sleeve like part # 58102. This sleeve...
    view full answer...
  • What Would Cause the Top of a Trailer Hitch Ball to Wear Excessively After 300 Miles
    If the ball is smaller than what the coupler requires then the coupler would be able to move around quite a bit and wear down the ball. If the ball is the right size then excessive tongue weight could be a factor. The trailer tongue weight is typically 10 to 15 percent of he gross trailer weight. The ball you use will need to be rated higher than the gross trailer weight. You can also lubricate the ball so that there is less friction. Some ball lube such as # 58117 would work well for...
    view full answer...
  • Recommended 12 Inch Hitch Extension with Step for 2-1/2 Inch Trailer Hitch Receiver
    The closest option we have available to what you're needing is the Buyers Products 12" Hitch Receiver Extension # 3371804015. This 12 inch long hitch extender features a weld-on step but is designed to be used with a 2 inch receiver opening. Because of this you will just need to add a reducer sleeve like the Reese # 58102 to your truck's hitch. We do not have a similar hitch extender/step available that is directly compatible with a 2-1/2 inch hitch receiver. I have attached a few video...
    view full answer...
  • 2-1/2 inch to 2 Inch Receiver Adapter to Accept 2 Inch Shank
    Yes, we have the Titan Reducer Sleeve 2-1/2 inch to 2 inch, item # 58102. Finally, we have the Diversi-Tech 2-1/2 inch to 2 inch Adapter Kit for DTLBM and DTALBM Series Locking Ball mounts, item # DTADP35, which is designed to work with the Diversi-Tech Aluminum ball mounts and includes a Long-span, locking hitch pin.
    view full answer...

< Previous
123. . .6

Do you have a question about this Hitch Adapter?

  • Why

    At we guarantee:
  • Highest quality hitch adapters for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate hitch adapter information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Robert G
Expert Research:
Robert G
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Dustin K
Video Edited:
Dustin K
Employee Matthew K
Test Fit:
Matthew K
Employee Shane T
Test Fit:
Shane T
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Cole B
Installed by:
Cole B
Employee David F
Installed by:
David F

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-496-5010