bing tracking image
  1. Trailer Axles
  2. Dexter Axle
  3. 5200 lbs
  4. 95 Inch Long
  5. 80 Inch
  6. Leaf Spring Suspension
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 5,200 lbs

Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 5,200 lbs

Item # 6340624
lowest price pledge
Our Price: $372.98
Trailer Axles
This item qualifies for Free Shipping
Shipping Weight: 49 lbs
Quantity: 
6340624 - Easy Lube Spindles Dexter Axle Leaf Spring Suspension
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately). Lowest Prices for the best trailer axles from Dexter Axle. Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 5,200 lbs part number 6340624 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (397)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Axles - 6340624

  • 5200 lbs
  • 95 Inch Long
  • 80 Inch
  • Leaf Spring Suspension
  • Spindles Only
  • No Hubs
  • Dexter Axle
  • Easy Lube Spindles

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Made in the USA


Specs:

  • Weight capacity: 5,200 lbs
  • Hub-face-to-hub-face length: 95"
  • Spring-center-to-spring-center length: 80"
  • Tubing outer diameter: 3"
  • Bearings (sold separately):
    • Inner bearing: 25580
    • Outer bearing: LM67048
  • Brake flange configuration: 5 bolt
  • Limited 5-year warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexter Axles

Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



6340624 Dexter Replacement Axle Beam - Easy Lube - 95" Hub Face - 80" Spring Center - 5,200 lbs






Customer Reviews

Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 5,200 lbs - 6340624

Average Customer Rating:  4.8 out of 5 stars   (395 Customer Reviews)

Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).

by:

After a rust related axle failure, my equipment trailer was down. (If you roll in the rust belt, check your axles near where the brake wire goes through)
After checking my local source, I was told there was a long lead time for new axles due to the pandemic.
I was so happy to find etrailer. They had the exact axles I needed. After I pulled the axles I realized I also needed hardware and u-bolts.
Everything arrived ahead of schedule, allowing me to get back up and running quickly.
Thank you etrailer. You are a valuable resource.




by:

One word, FANTASTIC! The #5200lbs Dexter axle was a perfect fit period! The axle came with all factory stickers and serial numbers to further identify the correct part. Shipped in a good time given that the part wasn’t in stock but the wait was worth while.
The price and free shipping where the deciding, the perfect fit was very gratifying as well I highly recommend etrailer.com




by:

These axles are of excellent quality. They are a replacement for 3500lb axles which proved to light for my loads. I've bought trailer axles from etrailer in the past with great success and plan to buy additional to complete my trailer upgrades.




by:

I lent out a 10000 lb. Trailer to a friend who overloaded it to the point the axle bent. I purchased one from etrailer along with brakes, drums and spring bolts. etrailer was there with good advice and guidance so the job was not hard and was done right the first time. Now I have a solid trailer with good brakes, I do not lend it out anymore.




by:

Great product used to replace the original Dexter agricultural style axle. Had no issues attaching to the trailer, and no problems supporting load. Would purchase again the next time I build/modify/upgrade a trailer.


Comments
Product has held up well over the past year in service without any issues towing cars, agricultural equipment, lumber, etc.
Austin B - 10/23/2020


by:

Fast but missing parts


Comments
Sorry to hear this. Customer Service will reach out to you.
-- Etrailer Expert Sierra K - 10/25/2021


by:

Shipping carrier nicked the wires for the electric brakes and lost spindle protection cup and the brass colored locking device for the hub nut.




by:

Excellent service, parts arrived quickly and on time, great parts and service, I couldn’t be happier with this order.


Comments
Works great, no issues at all
Michael - 04/03/2020



by:

Perfect fit and easy install.




by: 03/23/2021

Great fit




by:




by:

Great product and fast free shipping




by:




by:




by:




by:




by:

Review from a similar EZ Lube Axle in Trailer Axles


With Alex's assistance and knowledge of my trailer requirements, I installed two 3500 lb axles. These axles are superior to any others that I was shopping for, and with a combined GVW of 7,000 lbs my trailer is now suited for any medium sized load.




by:

Review from a similar EZ Lube Axle in Trailer Axles


Axel took 2 1/2 weeks to receive. When I received it was damaged broken grease fitting missing lock for nut. Missing 1 of 2 axel mount. Great price on axel.


Comments
It is certainly disappointing to receive the axle damaged when you have been waiting to receive it. I will have our customer service team reach out to you so we can have this taken care of for you.
-- Etrailer Expert Jenny N - 06/09/2022


by:

Review from a similar EZ Lube Axle in Trailer Axles


Adam was extremely helpful! After searching long and hard, the closest I could find was this axle of 80” spring centers. Mine were only 76” so Adam set me up with a pair of spring seats so I could carefully cut of the factory ones, grind smooth and weld the new seats at the 76” I needed to fit my trailer. After repainting, it looked like factory again. All others parts, brake assemblies, and drum/hub assemblies with bearings fit perfect!




by:

Review from a similar EZ Lube Axle in Trailer Axles


Easy peazy, I've purchased two of these. Sure beats driving all over to find the right axle. Arrived timely and installed easily. Big trip next week so they will get the test, but dexter axels have great reliability.




by:

Review from a similar EZ Lube Axle in Trailer Axles


Trying to update my trailers 5100 lb. Lippert axles with Dexter 6000 lb. axles. Dexter’s are very well made wished I didn’t have to send them back thus why the 4 stars. Dexters 74 inch center to center are not a direct replacement for Lippert. It’s very hard to get the hub face measurements by yourself so I assumed it would work unfortunately Lipperts are few inches wider. Customer service was great about letting me ship these items back. Great folks to deal with!




by:

Review from a similar EZ Lube Axle in Trailer Axles


Great customer service and great delivery times. Even with the current shipping delays parts stock is good. We have been using etrailer.com for years for small trailer parts with no issues at all.




by:

Review from a similar EZ Lube Axle in Trailer Axles


etrailer had the best prices and excellent customer service, Thanks Ian! Shipping was fast and free to boot. I bent the front axle on my in-laws fifth wheel camper and this axle fit the bill. I had to order a set of spring seats and weld them to the opposite sides. The original seats were at 68.5 " centers and that configuration was unavailable anywhere.




by:

Review from a similar EZ Lube Axle in Trailer Axles


It has been a year. The axle has preformed flawlessly. 5-star because it exactly matched the existing axle for bearing seal part and brake assembly which were moved from the existing lippert 5200# axle to this one. This 6000# axle provides a bit of margin for weight over the existing.




by:

Review from a similar EZ Lube Axle in Trailer Axles


I inherited an aluminum trailer that ended up needing a complete overhaul and etrailer was the best resource I could have found. After researching extensively to find out what I needed and watching their videos on how to do it I ended up ordering an EZ-lube axle, galvanized hubs, springs and a hanger kit (in other words everything from the frame down).
Everything shipped quickly and arrived in great shape. All the parts worked perfectly and I couldn't be happier!



25
395
Show More Reviews

See what our Experts say about this Dexter Axle Trailer Axles



  • What is Diameter of 5,200 lb Dexter Trailer Axle # 6340624
    The diameter of the Dexter Trailer Axle # 6340624 that you referenced is 3 inches which is standard for 5,200 lbs axles.
    view full answer...
  • How to Determine Correct Replacement Axle Upgrade
    I can tell you how to change to a different axle, although keep in mind that upgrading the axle to something higher rated won't give you more capacity (which is determined by the lowest-rated factor, which can be the chassis, frame, etc). I took a look at the specs of your 2018 Keystone Bullet 1750RK, and it has a GVWR of 4,700 lbs, which is what you will need to stay at, even if your axle is rated for more. So with that in mind, in order to choose the correct replacement axle for your...
    view full answer...
  • Weight of Dexter # 6340624-EB Trailer Axle
    The Dexter Axle # 6340624-EB weighs right at 145 lbs. This includes the hub/drums, brake assemblies, bearings, races, seals, grease caps and lug nuts.
    view full answer...
  • Info Needed for Work and Play, Forest River Toy Hauler Axle Upgrade to Higher Capacity
    From the info you listed your current axle seems to be a 4,400 lb axle with 95 inches from hub face to hub face but what I am unable to totally be sure on is the distance between the spring seat centers which is important for picking out an axle that will bolt up properly. The part # 6340624-EB that you referenced matches the overall length and is a higher capacity at 5,200 lbs but it has a spring seat to seat dimension of 80 inches which you would need to measure on your axle to be sure...
    view full answer...
  • What Makes 5200lb and 6000lb Dexter Axles Different Capacity?
    The thickness of the tube is not any different as they are both 3 inch diameter, and the spindles are also the same utilizing the same inner diameter bearings, hubs, and seals. The difference in capacity is in the custom bend in the axle that creates the zero camber angle for even road to tread contact. To the naked eye there is no difference between the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 6,000 lbs # 7461121 and the Dexter Trailer Axle Beam with E-Z Lube Spindles...
    view full answer...
  • Comparing LT Tires to ST Tires for Car Hauler Trailer
    LT tires are made differently from the ST tires. The ST tires have a stronger sidewall by design from the Light Truck tires. The Light Truck (LT) tires are normally better for steering and comfort, but on a trailer the Special Trailer (ST tires) will be a better choice as you don't need the flexibility for turning with the non-moving axle. Motorhomes usually use the LT tires for ride comfort, but when you have a trailer the ST tires are a better choice in most cases. The biggest differentiating...
    view full answer...
  • Recommended 5,200 lb. Axle for 5th Wheel RV
    I do not have the ability to pull an OEM build sheets to see what parts they installed at the factory so we will need to identify what axles you have installed outside of just the weight rating. I have linked a couple help articles that walk through how to determine the hub face measurement, spring centers and important points to best identify a replacement length. For a 5,200 lb. axle, I prefer the Dexter Trailer Axles with E-Z Lube spindles that come complete with electric brake assemblies,...
    view full answer...
  • How to Determine What Size Replacement Trailer Grease Seals Are Needed?
    Grease seals are a very specific fit and not something we can get a good read on with a tape measure. You will instead need to use a digital caliper like # PTW80157 to measure the spindle at that seal location and then the outer diameter of the seal where it fits the hub. When you have both the inner and outer diameter of the seal two points to the right of the decimal then we can help you with the correct replacement. I've linked the page to all the replacement options we carry to...
    view full answer...
    Image 1 for Image 2 for
  • Can Spring Seats on Dexter Replacement 5200LB Axle Be Installed Atop the Axle Rather Than Underneath
    You certainly can install a replacement 5.2K axle like # 6340624 by using new spring seats atop the axle. I'd recommend using part # TRSS300 but it's recommended that they at least be tacked into place so they stay put.
    view full answer...
  • Wheel Bearing Grease for 2018 Highland Ridge Open Range 370RBS
    The wheel bearing grease used will vary from manufacturer to manufacturer and by the exact purpose and rating for the axle. This information on your axle may be able to be obtained if you have the data tag still on the axle. For instance a Dexter axle will most likely have Dexter wheel bearing grease. I recommend looking at your 2018 Highland Ridge Open Range and going with the grease that works best for your specific needs. I have linked an article below that will guide you through...
    view full answer...
  • AL/KO 5200 lb Axle Replacement
    We offer some Dexter axles that might be a good replacement. You'll need to measure the hub face to hub face and spring seat to spring seat dimension of your current axle to see if what we offer is compatible. I've provided a diagram showing how to take that measurement. All the axles I'm showing you use spindles compatible with 25580 inner/LM67048 outer wheel bearings. For a 95 inch hub face and 80 inch spring center, use # 6340624-EB which includes hub/drums with 6 lug on a 5-1/2 inch...
    view full answer...
    Image 1 for
  • How to Determine Axle Capacity on Old Trailer
    I do have a way to give you an idea as to what the axle capacity is for your trailer but I called Dexter Axle and they were not able to look up the number, "021362" that you provided due to its age. If you have a leaf spring axle then what you are going to want to do is measure the diameter of the axle tube. Once you measure the axle tube you can then use the chart below to give you an idea of what the weight capacity is. If you have a torsion axle then your next best option would be to...
    view full answer...
    Image 1 for
  • Spring Seat to Attach On Opposite Side of Trailer Axle # 6340624-EB
    We don't have a version of the axle part # 6340624-EB that has the spring seats on the opposite side but you can weld a set on the other side with an additional set of seats with part # TRSS300.
    view full answer...
  • Can Tandem Axle Trailer Have Two Different Weight Capacity Axles
    It sounds like you are making or rebuilding a trailer. It's a good idea to have both axles rated the same on a tandem axle trailer. Together the 5,200 lbs Dexter Trailer Axle # 6340624-EB and 3,500 lbs Dexter Trailer Axle # 7359765-EB would be 8,700 lbs, however depending on how your trailer was loaded and the position of each axle it may not be able to handle the weight. Not to mention the bolt pattern is different, so different wheels and tires would need to be used for each axle. Keeping...
    view full answer...
    Image 1 for
  • Replacement Trailer Axle with 95 Inch Hub Face and 80 Inch Spring Center Measurement
    I have exactly what you need for a replacement trailer axle with 95" hub face to hub face and 80" spring center to spring center measurement. For this we have the following options based on weight capacity. 3,500 Lbs: part # 7359765 5,300 Lbs: part # 6340624 6,000 Lbs: part # 7461121 7,000 Lbs: part # 8327834 The above options all have the built-in E-Z Lube technology which allows you to easily grease your trailer hubs without having to remove any parts beside the plug for the grease...
    view full answer...
  • Torsion Axle on Enclosed Cargo Trailer No Longer Flexes
    Internally in the axle tube, there are rubber bumpers that will provide progressive resistance against the square torsion bar trying to twist. Over time and with disuse, the rubber bumpers become hard and brittle and will no longer provide the cushioning they used to. At this point, you'll need to replace the axle. We offer the Timbren Axle-Less suspension system like part # A35RS545 that might make an excellent solution for you. If you could get the listed capacity on the axles ID tags...
    view full answer...
  • Can 3,500 lb Axle of Trailer Be Upgraded to 5,200 lb Axle
    It's definitely possible to upgrade a trailer's axle rating to a higher rating by just swapping the axles. To pick out the correct axle you'll need to measure the distance between the hub faces and the spring seat centers and you'll know which will fit as a replacement. For example we have the # 6340624-EB which has a distance of 95 inches from face to face and 80 inches between the spring seats. Then for a wheel and tire that would fit that axle we have the part # TA59VR which would fit...
    view full answer...
  • Availability of 3 inch Diameter Trailer Axle with 80 inch Between Spring Seat Centers
    We have a very close option to what you need as long as there would be clearance for the wheels of your trailer to stick out an additional inch on either side with the axle part # 6340624 which is a 3 inch diameter axle, with an 80 inch spring seat to spring seat dimension but has 95 inches from hub face to hub face instead of 93 like you mentioned. This also has the 5 bolt brake flange as well. If you for sure needed the 93 inch length instead you'd need to find a local trailer shop to...
    view full answer...
  • How Do I Know What The Capacity Of The Axles Are On My Trailer?
    Unless your axles were custom made/modified, the 3" diameter will denote an axle in the capacity range of 5,200 pounds (like the Dexter # 6340624) up to 7,000 pounds (like the Dexter # 8327834). If there was a previous owner of your trailer, they may have upped them to a heavier capacity, but even some manufacturers will equip trailers with heavier duty parts than needed. Especially if it is a newer trailer. Demand has been much higher than supply recently so I have seen a couple trailers...
    view full answer...
  • Replacement Axles for Trailer With 94 Inch Long 5,200 Pound Dexter Axles
    I reached out to Dexter and found that your current axles have a capacity of 5,200 lbs and measure 94" hub face to hub face. Although we do not have a 94" axle you will be able to use the Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 5,200 lbs # 6340624 without any issues. The only difference will be that your tires will stick out 1/2" farther on either side of the trailer. This also has a spring-center-to-spring-center length of 80". If that does not match what you currently...
    view full answer...
    Image 1 for
  • 5200 lb Trailer Axle With 70 Inch Spring Centers
    Although we don't offer a 5000 lb axle, we do offer 5200 lb axles that might work for you, depending on the hub face to hub face dimension you're needing. We offer Dexter axles with an 86-1/2 inch hub face to hub face dimension and 71-1/2 center to center spring seat spacing that could work for you, but you'd need to remove the existing spring seats and tack new ones in place using part # TRSS300 at a 70 inch center. If an 86-1/2 inch hub face would work for you, we offer the following: •...
    view full answer...
  • Do the 5,200 Lb Dexter Trailer Axles Come With Leaf Springs
    I do have the correct leaf springs that you will need to use with the Dexter Trailer Axle w/ Electric Brakes part # 6340624-EB but these are not included. If you can provide me with your leaf spring hanger spacing then I can get you the correct leaf springs and equalizers if the ones you have now will not work. That said, most trailers will have a 29-1/2" leaf spring hanger spacing and if that is the case you can use the 5-Leaf Double-Eye Spring part # SP-111275 with the Curved Equalizer...
    view full answer...
    Image 1 for
  • How To Upgrade to a 5,200 Lb Axles On a Trailer
    In order to find the correct replacement axle you have a few options. The first option would be to simply measure the axle you have now and record both the spring center and hub face measurements. The other option would be to look at the axle tag and read the hub face (HF) and spring center (SC) measurements off of this as it should be listed for you here using these aberrations. The final option would be to record the serial number and get in contact with the axle manufacturer. I would...
    view full answer...
  • LIft Kit that Fits Dexter Torsion 3,000 lb Trailer Axle
    We don't have any torsion axles but sometimes you can go with a different angle torsion axle to gain more height. A common change is to go from a 10 degree down to a 45 degree down to gain a couple inches. What brand axles do you have? We may also have a lift kit as well.
    view full answer...


< Previous



Do you have a question about this Trailer Axle?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer axles for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer axle information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Alexander C
Written by:
Alexander C
Employee Mike S
Updated by:
Mike S

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.