Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
(320 reviews)
Price: $295.57
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs
Item # 7359765
Retail:$374.99
Our Price: $295.57
You Save: $79.42
This item qualifies for Free Shipping
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (320)
- Q & A (60)
- Photos
- Why etrailer?
Dexter Axle Trailer Axles - 7359765
- 3500 lbs
- 95 Inch Long
- Leaf Spring Suspension
- Spindles Only
- 80 Inch
- No Hubs
- Easy Lube Spindles
- Dexter Axle
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).
Features:
- Round axle beam acts as part of your trailer's suspension system
- Replace an axle on your trailer
- Fabricate a suspension to fit your application
- High-strength steel construction
- Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
- Best for straight-line acceleration and steady, controlled towing
- Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
- Low ride height makes it easier to load and unload your trailer
- Straight, E-Z Lube spindles - no drop
- Built-in grease zerks for simple lubrication
- Spring seats, brake flanges, and spindles are welded on
- Made in the USA
Specs:
- Weight capacity: 3,500 lbs
- Hub-face-to-hub-face length: 95"
- Spring-center-to-spring-center length: 80"
- Tubing outer diameter: 2-3/8"
- Bearings (sold separately):
- Inner bearing: L68149
- Outer bearing: L44649
- Brake flange configuration: 4 bolt
- Limited 5-year warranty
Axle Dimensions
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
E-Z Lube Spindles Make Lubrication Simple
The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.
Dexter Axles
Dexter axles are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
7359765 Dexter Replacement Axle Beam - Easy Lube - 95" Hub Face - 80" Spring Center - 3,500 lbs
Customer Reviews
Dexter Trailer Axle Beam with E-Z Lube Spindles - 95" Long - 3,500 lbs - 7359765
Average Customer Rating: 4.8 out of 5 stars (319 Customer Reviews)
Round trailer axle beam measures 95" from hub face to hub face (when hubs - sold separately - are mounted) and 80" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).
- 7359765
by: HukillB04/20/2021
Easy peazy, I've purchased two of these. Sure beats driving all over to find the right axle. Arrived timely and installed easily. Big trip next week so they will get the test, but dexter axels have great reliability.
- 7359765
Merle R - 04/23/2021
by: Van R04/22/2020
Trailer axel fit properly without issues to replace an axel that broke probably from heavy loads on very potted country roads. So far this axel has held up and performed beautifully. Provided instructions and videos very helpful including information to select correct replacement axel. These folks go out of their way to help ensure correct installation and use. Far better than any other supplies I have used.
Comments
So far it is holding up well and working as anticipated.
Merle R - 04/23/2021
- 7359765
Tony F - 01/20/2021
by: Tony F01/19/2020
Exact fit , good business people very helpful. Best price, have other parts in the past with good prices, shipped out fast and lots of parts.
Comments
Great.
Tony F - 01/20/2021
- 7359765
by: Justin09/02/2021
Great quality axle for the price tag. Would recommend
- 7359765
by: Bill S04/08/2020
Disappointed. I bought a pair of these axles to replace the originals from my trailer, one of which had rusted so much that it broke. They are the same manufacturer and part number, but updated versions. Unfortunately, one of them already bent, while carrying the exact same load (a pickup truck) that the old rusted ones had handled just fine about five years ago. I like the fit and initial quality, the updated greasing system and nut retainer are nice, but really not something I care about--I'm fine with repacking bearings the old way and securing the nut with a cotter pin. I'm not sure that they are as strong, as the old ones lasted until they rusted out, and one of these has already had to be replaced less than a year after installation.
- 7359765
rick b - 04/04/2021
by: Rick04/03/2020
Had a repair for friend. Ordered axle and received in a couple days. Easy install and axle was exact replacement. Customer happy and we will us you again. Thanks
Comments
no problems everybody happy
rick b - 04/04/2021
- 7359765
Roger S - 12/21/2020
by: Roger S12/19/2019
It's a great axle for the money. It was super easy to install and fit my old hubs perfectly
Comments
Still going strong. Ive had several big loads on my trailer after installing this axle and it hasnt given me any problems
Roger S - 12/21/2020
- 7359765
by: Jack07/15/2021
Great product but inventory issues most likely caused by the pandemic slowed shipping.
- 7359765
Bob C - 01/03/2021
by: Bob C01/02/2020
Easy to install, price was right, used to haul maximum loads 5x between CA and CO, no problems.
Comments
Still straight after more than a year hauling water, cars, etc.
Bob C - 01/03/2021
- 7359765
Steven - 04/11/2020
by: Steven04/10/2019
just got the axles , look like the right one's. price was good and liked the free shipping. Did not like the time is running out statement on the free shipping. Is free shipping a limited time thing or everday? If it's free shipping on all orders $100 or more all the time then say so.
Comments
No problems with the axles, fit perfect
Steven - 04/11/2020
- 7359765
by: Bill T.11/29/2018
Excellent axle and hub quality and fitment. Beefy welds on heavy steel with precision spindle machining. Bearings and hub fit like a glove. No toggle in the hubs. Made for quick replacement of a destroyed axle and hub after a friend used the trailer. I highly recommend these products if you are looking for confidence in your replacement trailer parts.
- 7359765
by: Allen09/09/2019
Excellent product. I bent an axle, so ordered this. My brakes bolted on effortlessly and the axle itself bolted into placed perfectly. Shipping was fast and I was pleased with the overall experience with etrailer.com
- 7359765
by: wrgarza07/20/2019
My car hauler had a bent axle due to letting someone borrow it who improperly distributed a load (not a car). The tires were wearing very uneven. Ordered this axle and it was a direct replacement. Easy install and works great!
- 7359765
by: Chris04/15/2021
Simple to install and works well the springs, u bolts and wiring. Has successfully hauled many loads safely
- 7359765
by: John S06/14/2021
The product was shipped fast and delivered in2 working days and came In well protected ty
- 7359765
by: Robert07/30/2019
Prompt Delivery via UPS. Axle and all additional products purchased were well protected for shipment. Had the new axle installed within hours of delivery, because I had already reviewed the company's installation videos. Very Satisfied with purchase and support. Highly recommend.
- 7359765
by: Luke08/13/2018
Replaced an axle with a bent spindle. Fit perfectly and was easy to install. Shipping was really fast. Will definitely use etrailer.com again when needed.
- 7359765
by: Bruce07/21/2018
The axle arrived in 3 days and in perfect condition. Excellent quality product at a great price. Easy install. Went from a 4" drop axle to a straight axle for better ground clearance for my enclosed RZR trailer.
- 7359765
by: Santiago05/21/2021
Arrived on time.
- 7359765
by: William12/30/2018
Fits great. Fast shipping. Had one wire cut for trailer brake from shipping but other than that great product.
- 7359765
by: Robert12/07/2019
I'm very happy with my trailer axle fit perfectly and I'll be ordering my second one in a few weeks thanks again and happy holidays to you and your family
- 7359765
by: Almon03/16/2019
I was very happy wit the trailer axles and was surprised how fast they where delivered with it being free shipping.
- 7359765
by: Laura06/06/2019
Great quality, great pricing, great service and fast delivery. What's not to like. We buy all our trailer parts at etrailer.
- 7359765
by: Jason07/13/2018
Arrived early and just what I needed to get my trailer up and going again. Will definitely be buying again. Thanks guys
- 7359765
by: Jason07/13/2018
Arrived early and just what I needed to get my trailer up and going again. Will definitely be buying again. Thanks guys
25
330
Show More Reviews
Ask the Experts about this Dexter Axle Trailer Axles
- Availability of Trailer Axles With 72 Inch Spring CentersThe two relevant dimensions when replacing a trailer axle is the hub face to hub face of the existing axle and the center to center spring seat dimension. Are you sure about that spring seat center to center distance? The closest axles we offer are a 5200 or a 6000 lb axle with a 71-1/2 spring seat center to center dimension. All have a hub face to hub face dimension of 86-1/2 inches. I've provided a diagram showing these dimensions. We have a total of 4 axles available with these...
view full answer...![Image 1 for]()
- Recommended 95 Inch Trailer Axle with 78 Inch Spring Seat Locations For your 95 inch axle we only have 79-1/4 inch or 80 inch spring seats. You can add spring seats to the ones already there, but they are designed for those specific locations by their design. You can choose one like # 7359765 and then weld on spring seats like # TRSS238 at 78 inches on center. Another option is to use an axle-less system like the Timbren # ASR3500S05. This allows you to add both the spindle and the suspension with a simple bolt on installation. If you aren't right...
view full answer... - Replacement Axle and Leaf Springs For Road Warrior TrailerYou want to replace the axle and leaf springs with the same dimensions of axles and springs you have now on the Road Warrior. The Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765 measures 95" hub face to hub face. It also measures 80" from spring center to spring center so you wan't to make sure your existing axle is the same size. This axle does not come with hubs so you wan't to make sure your existing hubs will fit the spindle's of the new axle or you can replace them....
view full answer... - How To Choose Correct 3,500 Lb Axle for Slipper Spring SetupIn order to determine which axle is correct for your trailer we need to find out what your hub face (HF) and spring center (SC) measurements are. If you take a look at the photo I have attached for you that should then help with obtaining the above two measurements. The most important thing we need to look for is the hub face as the spring center can then be moved (within a range) if we need to. I have attached a list of the 3,500 lb axles we offer in the varying hub face and spring center...
view full answer...![Image 1 for]()
- Correct Replacement for 3,500 Lb Axle with 95" Hub FaceThe correct replacement 3,500 axle with 95" hub face measurement is the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765. The spring centers are 80" apart so you will need to remove them and tack weld new spring seats in the locations that you measured using part # TRSS238. Please note, the spring center is measured from the center of each seat. The hubs are not the same for a 3,500 lb and 7,000 lb axle.
view full answer... - Will Dexter Axle Beam 7359765 Replace Bent 95" Hub Face To Hub Face Dexter Axle?It sure is! The Dexter Trailer Axle Beam # 7359765 you were looking at has the same 95" hub face to hub face and 80" spring center to spring center measurement as your current axle so this will be an exact replacement for you. The spring seats on this axle are located on the bottom so it will sit above your leaf springs just like your old axle. Since you mentioned you brake components are in good shape they can be transferred over as this axle uses the same bearing combination of...
view full answer...![Image 1 for]()
![Image 2 for]()
- Does Dexter 3,500 lb Leaf Spring Axle Use Number 84 SpindleYes, the Dexter axle part # 7359765 that you referenced uses the same 84 spindle that you have measures. This will allow you to reuse your current hubs and bearings.
view full answer...![Image 1 for]()
- Replacement Trailer Axle with 95 Inch Hub Face and 80 Inch Spring Center Measurement I have exactly what you need for a replacement trailer axle with 95" hub face to hub face and 80" spring center to spring center measurement. For this we have the following options based on weight capacity. 3,500 Lbs: part # 7359765 5,300 Lbs: part # 6340624 6,000 Lbs: part # 7461121 7,000 Lbs: part # 8327834 The above options all have the built-in E-Z Lube technology which allows you to easily grease your trailer hubs without having to remove any parts beside the plug for the...
view full answer... - Replacement 3,500 Lb Dexter Axle D4518710I spoke to my contact at Dexter Axle and was able to determine that you have a 3,500 lb axle with 80" spring center and 94" hub face measurement which means the correct replacement for you will be the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765. If you have idler hubs and you would like to replace these as well then you can use the Dexter Trailer Axle w/ Idler Hubs part # 7359765-I or if you have hubs/drums and you would again like to replace these as well then you...
view full answer... - Replacement 3,500 Lb Axle for Enclosed Cargo Trailer with 92" Hub Face The Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765 is the most common 3,500 lb axle which has a hub face measurement of 95" and a spring center measurement of 80" although the spring seats can be moved. I would be willing to bet this is likely what you have now but please note the hub face is actually where the wheels butts up against the drum so the base of the lug stud. Please note, we don't offer any axles with a 92" hub face but if this is really what you have then...
view full answer... - Recommended 3,500 lb Axle Replacement for 2000 MacGregor TrailerFor your # L68149 bearings as both inner and outer hub bearings we don't have a direct replacement option for any hub or rotor assembly. That spindle is not a standard size, so I recommend replacing the axle itself. You will need to determine what your existing axle's hub face (HF) and spring center (SC) measurements are to determine if one of our standard 3,500 lb Dexter axles linked below will work as a replacement. For example, Dexter Trailer Axle Beam part # 7359765 has a...
view full answer...![Image 1 for]()
- Axle Replacement Recommendation for 2011 PJ Tilt Trailer with 3,500 lb AxleYes, you can use the Dexter Trailer Axle Beam with E-Z Lube Spindles # 7359765 as a replacement for what you have. This actually comes with it's own lock washer and nut too so you wouldn't have to try and reuse what you have or source a new setup all together. Your current hub/drums and assemblies will easily transfer to this.
view full answer...![Image 1 for]()
![Image 2 for]()
- Availability of 3,500 lb Dexter Axle without Hubs thats 95 inches Long It's definetely possible to custom order an axle without hubs. Most trailer shops who can order Dexter axles wouldn't have a problem with this. I am actually a little surprised that where you went didn't offer you this. We actually have the exact axle you want as the part # 7359765 that you referenced. It's the correct dimensions and has brake flanges like you need too. This will fit your current hubs too.
view full answer... - Replacement 3,500 Pound Hubs and Trailer Axle with 94" Hub Length I'm sorry to hear about your recent mishap! I'm not sure which of the two axles and hubs on your trailer are in need of replacement but we have exactly what you need for either! To start, for the axle itself the Dexter Trailer Axle Beam # 7359765 will work perfectly. This axle features a 95" hub face length and a 80" spring center length, matching the existing axles on your trailer really well. The extra inch on the hub length won't cause any issues. Then for replacement idler hubs...
view full answer... - Will Higher Rated Axles Give Trailer A Larger CapacityThe rating of the axles only determines the amount of weight the axles can bear; in regards to hauling more weight you are limited by the lowest-rated component. For example, if your trailer had a GVWR of 6,000 lbs and you put a pair of the 3,500 lb Dexter Trailer Axle Beam # 7359765 on you would still be limited by the 6,000 lb GVWR of your trailer - you would not be able to haul the 7,000 lbs that the axles are rated for. If your GVWR than your axle capacity you could upgrade your...
view full answer... - Matching Trailer Axle Specifications to Select Dexter 3500-lb Replacement AxleThe Dexter axle you referenced # 7359765 differs from yours in length. This replacement axle has a hub face to hub face dimension of 95-inches, one inch longer overall than yours. Its 3500-lb weight rating and 80-inch spring center spacing are the same. If this slightly wider placement of the hubs/wheels/tire will not cause clearance problems at your fender it will work. Please refer to the photo I linked. But if you can find the axle's actual 9-digit serial number engraved on the beam...
view full answer...![Image 1 for]()
- Picking Out Replacement Axle for Snowbear 550LHD TrailerThat spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You will need to measure from hub face to hub face and then from the spring seat centers. You will also need to know what bolt pattern you have on your current hubs. I attached a help article on how to determine this as well. I also attached a link...
view full answer...![Image 1 for]()
![Image 2 for]()
- How to Determine Replacement Axle for a 1998 Road King TrailerIn order to replace your axle you'll need to look on the tag for the axle (usually located in the middle of the axle) for the weight capacity (if you don't already know it) and then you'll need to measure your hub-face (HF) and spring-center (SC) distances for the axle. I have attached a photo showing how to determine those measurements. Once you have all of this info then you can choose the correct replacement from our linked selection. For example, the Dexter Trailer Axle Beam # 7359765...
view full answer...![Image 1 for]()
- A 95 Hub Face With 73 Spring Center For Extra ClearanceYour answer really depends on how big the tires are you want to use. We generally recommend 2" between the tire and frame and 4" between the tire and fender for suspension. From here you would mock up your axle setup to see if your measurements will work. Vehicle tires are not really intended for trailers but we do see used for off road applications often. At 8 or 9 inches space between your hub face and spring center you're fine but at 11 inches per side, suspension, tire wear,...
view full answer... - How To Determine the Correct Replacement Trailer AxleIn order to replace a trailer axle you will first need to know the weight capacity which can most easily be found on the axle tag sticker. Then, you will need to know the hub face (HF) and spring center (SC) measurements which can also sometimes be found on the axle tag. If not, you will simply measures these yourself. The hub face would be from the face of the hub/drum from end to end and the spring center would be from the center of the leaf spring stack end to end. The Dexter Trailer...
view full answer... - How to Pick Out Replacement Axle for Trailer By MeasuringWe don't have a way to look up exactly what axle you need based on what you listed but we can still help. When picking out an axle for a trailer you'll need to know the overall length of it from hub face to hub face as well as the distance between the spring seat centers to pick out correct size. I also attached a link to a page with all of the axles we carry.
view full answer...![Image 1 for]()
- Recommended Replacement Axle for a 23 Foot TrailerFrom the pictures you supplied, it looks like you should be able to go with a straight axle. It doesn't look like it would sit any higher than the beam that crosses the rear of the trailer. That being said, you will need to confirm a few measurements to make sure the replacement axles will fit your trailer. The Dexter # 7359765 will measure 95 inches from hub face to hub face and 80 inches from the center of one spring seat to the center of the other spring seat. With this being a 3,500...
view full answer...![Image 1 for]()
![Image 2 for]()
- 3,500 lb Trailer Axle Recommendation that's 95 inches Long and 5 on 5.5 inch Bolt Pattern HubsWe have the parts you'll need! The axle you mentioned part # 7359765 is the correct starting point as it's a 3,500 lb axle that is 95 inches from hub face to hub face and has 80 inches between the spring seats. Then for hub/drums that have a 5 on 5-1/2 inch bolt pattern you'd want the # AKHD-555-35-K which fits this hub and then for brake assemblies you'd want the # AKEBRK-35R for the right hand side and the part # AKEBRK-35L for the left hand side. With all of these components you'd be set!
view full answer... - Replacement for Dexter Axle Beam 6508174 Yes, the Dexter Nev-R-Adjust Electric Trailer Brakes and Dexter Trailer Hub and Drum Assembly that you have on your Dexter Trailer Axle Beam 6508174 will fit on the Dexter Trailer Axle Beam with E-Z Lube Spindles part # 7359765 without any additional modifications. I called my contact at Dexter to confirm this. The only thing you need to check is your spring center and hub face measurements which should be 80" and 95" respectively.
view full answer... - Idler Hub with 5 on 4-1/2 inch Bolt Pattern to Fit 3,500 lb Trailer Axle # 7359765For an idler hub with a 5 on 4-1/2 inch bolt pattern to fit the trailer axle part # 7359765 you'd want the part # 84545UC1-EZ.
view full answer... - How to Select 3,500 lb Axles for Boat TrailerA trailer with a GVWR of 10,000 lbs would not be able to pull a 13,000 lb boat; the trailer would be able to handle no more than 10,000 lbs. Even if you upgraded to axles with a capacity over 10,000 lbs the trailer's GVWR would not change because its components, such as the frame, are not rated for more than 10,000 lbs. If you do need new axles that will give you a combined rating of more than 10,000 lbs you can select three axles with a 3,500 lb rating. To determine the correct replacement...
view full answer...![Image 1 for]()
Do you have a question about this Trailer Axle?
Why etrailer.com?
At etrailer.com we guarantee:Highest quality trailer axles for the best price.
Our Lowest Price Pledge ensures you will never overpay for the parts you need.Real product know-how.
We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.Most detailed, accurate trailer axle information available.
Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.Installations, made easy.
We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.Fast shipping.
Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.Personalized service for life.
We provide one-on-one, personalized service from the ordering process through the life of your product.Trusted since 1946.
We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.Returns Policy
Need to return an item? No problem. Please read our Returns Policy for more information.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video Edited:
Jeff D
Written by:
Alexander C
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 800-298-1624
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.