bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 4500 lbs GTW
  6. Visible Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 75270
lowest price pledge
Our Price: $177.75
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 44 lbs
Quantity: 
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" 5000 lbs WD GTW 75270
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 75270 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (1706)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 75270

  • Class III
  • 2 Inch Hitch
  • 4500 lbs GTW
  • Visible Cross Tube
  • Draw-Tite
  • 675 lbs TW
  • 5000 lbs WD GTW
  • Custom Fit Hitch
  • 675 lbs WD TW

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


Features:

  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Black powder coat finish covers e-coat base for superior rust protection
  • Stylish, round-tube design
  • Ball mount, pin and clip sold separately


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,500 lbs
      • Maximum GTW when used with weight distribution: 5,000 lbs
    • Maximum tongue weight: 675 lbs
      • Maximum TW when used with weight distribution: 675 lbs
  • Limited lifetime warranty


Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.



Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.


In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



75270 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

87479 Hidden Hitch Class 3 Trailer Hitch Receiver

Installation Details 75270 Installation instructions

This Product Fits The Following Vehicles



California residents: click here



Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 75270

Average Customer Rating:  4.8 out of 5 stars   (1706 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.

- 75270
by:

Hitch was very easy to install per included instructions. The hardest part was holding the hitch in place while I installed the bolts. I used blocks of wood to hold the hitch in place. Thanks again for a quality product with easy installation!


Comments
Its still proving to be a valued product!
George M - 06/07/2021


- 75270
by:

The first one I ordered had to be returned because it was damaged that was easy enough to do no issues so that was nice. When installing the bolts it would have been nice if the directions mentioned that you need to clean out the pre-drilled holes. Overtime dirt builds up and even with the appropriate torque still managed to completely strip and destroy the hole. So I got five out of six bolts holding it on unless it gets re-machined, that’s all I’ll ever get probably OK to carry bikes but will never support a trailer so that’s disappointing.


Comments
Since the bolt is stuck in the bolt hole where it spins freely indicates that the weld nut has broken off on the frame. There are two ways that it can be repairs. The first is to cut off the bolt and remove it along with the weld nut. You would them drill the hole out to 0.5 inch. After that find an access point in the frame that you could fish wire an 0.5 bolt, a spacer block like part # RP3022
Trailer Hitch Spacer Block - 3" Long x 1" Wide x 1/4" Thick
$9.20
, and a 0.5 hex nut like part # 55178
Hex Nut - 1/2"
$3.05
. We do not carry the 0.5 carriage bolt that you would need however we do have the fish wire part # 80101-1
1/2" Bolt Leader
$3.10
. I do have a video that you can reference below. You may need to remove the hitch entirely to do this and if that is the case then new hitch hardware is needed. It would be part # RHK
Replacement Hardware Kit for Trailer Hitches
$55.45
on our site. The second option would be to weld the hitch on in that location.
-- Etrailer Expert Jenny N - 04/13/2022


- 75270
by:
2003 Honda Odyssey

All the holes lined up on my 2003 Odyssey. The hard part was cleaning out the holes in the frame. The bolt size is M12 x 1.25 x 35. The important part is the M12x1.25 if you need to buy a test bolt to help clean out the holes. I ended up using a tap to very slowly and carefully clean out the holes while spraying in PB Blaster to help dissolve the dirt and rust. Cleaning out the holes took way longer than mounting the hitch. Patience is needed when cleaning out the holes so you don't create a larger problem. Spraying PB Blaster on a little piece of paper towel and screwing in the towel into the holes helps soak the threads without having it all drip out. 6 pieces of stacked 2x lumber per side was just the right height to hold the hitch in place while bolting it on. Make sure you center the hitch to the gas tank so you don't have one side touching the gas tank.



- 75270
by:
2009 Honda Odyssey

Bought a trailer hitch for our 2009 Honda Odyssey. The only hitch (get it) was that it was delayed in shipping by one day. The delay was by UPS, not etraler's fault. We live in a remote part of California, so that's not very unusual. The hardest part of the instillation was getting the rubber exhaust hanger free. A squirt of WD40 took care of that. It bolted up perfectly, as if it came from the Honda factory. I also bought the trailer wire kit. My biggest anxiety was getting the interior panels off without damaging the clips. They came off easily and the wire kit installed as easy as the hitch. Overall, it took about 2 hours from start to finish. That includes getting out the jack, stands, tools, being interrupted by my two year old a few times and cleanup. I chose etrailer because of the price for a Draw-Tite hitch. I had found cheaper hitches online, but didn't know the brands. I trust Draw-Tite. We are in the market for a vintage camping trailer and this is what we need to pull it. I told my wife that this was easiest part I've ever installed. It went as straight forward as the instructions showed. Thank you etrailer.


Comments
Our hitch is still working great. When the time comes to get a new vehicle, I’ll be looking to etrailer if it doesn’t already have a hitch. I’m very happy with my purchase.
Dave C - 04/28/2019



- 75270
by:

I cannot grade the towing capability yet, but this review is on installation. Less than one hour from start till I was putting tools away on the same day of arrival. One man job with the assistance of a rolling floor jack. Put rear up on ramps, hit holes with wd40, used one bolt to test run all threads, did not unhook tailpipe, simply insert the plate in, over, and let it rest on on exhaust (majority of weight still supported by jack). Start with left side, place 1 bolt loosely and then continue to switch sides with two at a time. Used torque wrench at 68 lbs to finish securing. Done. Looks great too! Up next: electrical and trans cooler. Thank you etrailer for the product and videos. Bought the hitch bc of such great reviews.


Comments
Wonderful. Great towing hitch. Looks clean, sleek, and strong. No problems at all. Well pleased! Have used numerous times for towing.
Jarrett e - 03/09/2016



- 75270
by:

We owned the trailer hitch receiver for over a year and it is perfect for our 5-bikes carrier. It’s sturdy and it was easy to install on our van. I would definitely buy from e trailer again!



- 75270
by:

This can be a one man job if you have ramps and a short step stool. The thing that made the install take longer than 30 minutes was that the bolts on the passenger side would not line up if the drivers side bolts were on. I had to remove all the bolts on the driver side and set the hitch on a step stool 12 inches high so that the driver side was about 3 inches away from the mounting location. This was the only way i could get all three passenger side bolts to line up. Torqued to 69 pound-feet and i was done. Three stars for those three bolts.


Comments
I had the same problem and it was a nightmare. Why is everyone giving this 4-5 stars then? Box arrived was a joke. The the holes didnt align. Im curious whether the reviews are real or not.
-- comment by: Randy C - 06/12/2015

Thanks for your comment and feedback. I see that our customer service team was in contact with you and were able to get this issues resolved.

-- Etrailer Expert Rachael H - 6/15/2015


- 75270
by:

Great product so far, we have only used it with our bike rack but no complaints. etrailer is the best company to work with due to their amazing customer service!


Comments
The hitch works great but it does lie a bit low on the vehicle and we have had some surprise scrapes on pavement. Other than that no complaints.
Drew R - 09/16/2021


- 75270
by:
2007 Honda Odyssey

This was my first time buying from eTrailer. eTrailer made selecting the proper hitch for my 2007 Honda Odyssey van easy. Also, this hitch readily attached to my van just as the installation video showed, and the quality of this hitch exceeded my expectations. Following the instructions, my teenage sons and me were able to quickly install the hitch in a reasonable amount of time. I trust that I can competently find the products with the features I want that properly fit my vehicle from eTraller. I look forward to future purchases to best use my new hitch. Thanks to your team at eTraler!



- 75270
by:
2009 Honda Odyssey

Easy install. I followed your instructions and helpful videos and was able to install it by myself using a jack on one end and securing a bolt on each side. After that it was easy. I was a bit surprised that it sits so low, less ground clearance now but each vehicle is limited on where a hitch can be added. Very easy and good quality and good price.



- 75270
by:
2015 Honda Odyssey

Very pleased with this hitch. It is very strong and lives up to its ratings for WD setups. Particularly pleased that it's ground clearance is the same as a lighter weight hitch I previously had on this 2015 Honda Odyssey. Many thanks to etrailer staff and their advice on what I needed!



- 75270
by:

I'm not sure how a hitch install could be any easier. It doesn't require two people because you can hang the passenger side of the hitch on the tailpipe while you start one of the bolts on the drivers side. By a mile, the hardest part is chasing the existing threads on the van. My van had traveled many dirt roads and the grime was thick on the underside. Still, this wasn't a hard job at all. I've included pics of the installed hitch and the 6 bolts (yes, only 6) that are required to do this job. We're going to the lake this weekend and we'll be pulling the popup behind us. We also bought a transmission cooler from this site as well and it's going to keep the transmission cool while we're hauling kids, bicycles, pets, and everything else down to the campsite.


Comments
Now that a year has gone by Im happy to report that this hitch has been a great performer. No issues, troubles, hiccups, or regrets about this purchase.
Chris H - 06/08/2017



- 75270
by:

Build quality is 5 stars. Definitely beefy enough to do the job and the hardware that came with the hitch was good enough quality. My only complaint is that this is not a perfect fit for a 2017 Honda Odyssey. I managed to get the bolts and spacers in 5 of the 6 mount points. The only one that didn't align was the farthest bolt on the passenger side. Not a big deal if you are mounting a bike rack, cargo carrier, or even a smaller utility trailer, but not if you are going to tow a trailer within 1000lbs of limit. Thats where the 3 star rating comes in. If that last hole lined up, would have given it 5 stars.


Comments
It sounds as though the hitch side bracket was flexed out of alignment. This can happen with hitches while in transit. We do have an FAQ that can help with a flexed hitch.
-- Etrailer Expert Jenny N - 11/15/2021


- 75270
by:
2004 Honda Odyssey

Works great ... has me wondering why it took so long to install one on my van. I use it primarily for a utility trailer (carting items to the landfill), as well as, for a bike carrier that holds 4 bicycles. I read somewhere that the suggested time to install was 2-hours and it was spot-on. After a quick inspection of the undercarriage ... I made a trip to the local "store" to get a 1/2" tube brush and 12 mm x 1.25 Tap set ... even though you might be able to save a buck or two ... SAVE yourself the trouble and hassle and just ORDER them both when you but this hitch. My son and i spent about 1 1/2 of those 2 hours cleaning out a number of years worth of road grit from the pre-installed holes on the vans frame designed to receive the bolts that came with the hitch kit. Once the holes were cleaned out and the muffler exhaust pipe freed ... it was about 20 minutes to install. Very straight forward. The holes in the hitch lined up with the pre-installed holes on the Vans frame without much maneuvering needed. While you can probable install this solo, the hitch is "kind of heavy" when you lying on the ground ... so a helper is ... helpful. The video was an excellent resource for the install ... GREAT JOB!!!!.


Comments
Still a great hitch after 1 year of service. Still solid and no problems. as noted by others, there is some paint chipping off with minor noticeable corrosion at those spots... However, after the year of trips to the Landfill, scout camps, miles of travel on gravel roads hauling a utility trailer and bike rack and the associate abuse of being under the van ... this has been the best upgrade a vehicle owner can make. when the van goes ... the hitch will stay.
Roger - 05/27/2021

Thank you for your review. Please cover any bare metal with anti-corrosive paint and grease often.

-- Etrailer Expert Sierra K - 5/28/2021


- 75270
by:

can be a one person job when following the video guide and do a little bit research, this hitch is solid and sturdy, have been loading a 75 pounds ebike for a few weeks without any problem. i built my own ramp using solid wood as many reviewers did.


Comments
Still good
figo - 09/24/2018



- 75270
by:

Installation was so easy, once the rear of the car was lifted, it took about (15) fifteen minutes total time to install. It looks great too. etrailer is my go to company and they've always taken excellent care me.



- 75270
by:
2016 Honda Odyssey

The item arrived on the scheduled day just as estimated. Installation was exactly as shown in the etrailer review and installation video. Very helpful to see the process start to end. Passenger side threaded holes were difficult to get started due to rust. Tailpipe didn't have to be lowered on our van to install which was nice. It took 1.5 hours from started to cleanup. Using ramps that I use for oil changes helped make enough space to get underneath. 4 stars because the shipping box was trashed! There should be a better way to ensure the product doesn't make swiss cheese out of the box.



- 75270
by:
2005 Honda Odyssey

Really great product. Fits my 2005 Odyssey like a glove. This was my very first installation and I can confirm that it can in fact be installed by a single person, without raising the car and without removing the exhaust pipe. It did take a while (probably 1.5 hrs total) to complete as I needed to clean the threads in the weld nuts. Following recommendation from someone on this web-site (i.e. one of the reviewers), I had purchased an M12 x 1.25 tap and it made the work super easy (initially tried just WD40 with steel brush with basically zero effect as there was some serious rust build up in the threads). I've positioned the hitch on two jack stands (which supported it at JUST the right elevation) and started "wiggling" it towards the car frame. The driver's side was a piece of cake. It took a bit of effort to squeeze the passenger side of the hitch in between the car frame and the exhaust pipe. Once that was completed, the rest was relatively easy. I forgot to mention that I did try to remove the exhaust pipe, but didn't manage to do so. It would have made the things easier, but in the end I ended up "deflecting" the pipe suspended on the rubber piece by hand in order to be able to work with the bolts on the passenger side. All in all, very nice fit, super strong and sturdy hitch and overall - a really great experience (and tons of satisfaction =). Thanks etailer.



- 75270
by:
2011 Honda Odyssey

Purchased this hitch rather than others because I like that it picks up all six factory weld nuts making the bolt pattern long and strong, has massive bent up shear webs, uses welded lug design to retain tube, exceeds my vehicle rating, and is compatible with j-pins. I have a steep driveway so ground clearance was a concern. While several other hitch models/brands have slightly better clearance (better by 5”-.75” at receiver) they require more install time and vehicle mods, or don’t look as structurally redundant. My hitch arrived in a banged up box, which is understandable given the products’ size and weight. One spot of powder coat was chipped off. I spray painted the spot before install. I used ramps for more working space. My Ody has factory mud guards, so I had to remove the driver side guard before the fascia. Fascia protected driver side weld nuts from rust, but pax side rust was moderate. Did not drop the exhaust. Used 2x6 on a floor jack to lift and roll hitch into position. Rolled right over exhaust without problem. Kids served as outriggers on 2x6 to prevent tip over, which never was an issue. Exhaust is directly below aft two weld nuts but a socket wrench with long extension can be used to push the exhaust pipe genially out of the way, even when still connected to the rubber grommets. It took some a little shifting and trial and error to get all six bolts to line up and go in. I found it best to put aft bolts on each side in first, then the forward, then middle. Like a tire, I incrementally torqued in a star-like pattern. Total install time was 3hrs, but I wasn’t in a hurry. After installation I checked clearance at bottom of driveway and found it to be 1.5”. I’m looking into skid wheel options for when I’m loaded. All-in-all, I’m happy with my experience thus far.



- 75270
by:

Wow.. what a quality built and easy to install. Did 95% installation myself with my wife putting in the last bolt. I had to push and maneuver the hitch a little for the bolt to in into place. Looks pretty awesome on my Odyssey.



- 75270
by:
2007 Honda Odyssey

Good hitch and pretty easy install. Took about 2hrs including wiring. I listened to other reviews and just bought a 12mx1.25 tap at Ace hardware. I used a ratchet and 9mm socket on the back of the tap. Used chain lube in the wholes and blew out with a air line when done. Propped one end on a jack stand and pushed the other end up to start bolt. The exhaust pipe is fairly simple to get out of the hangers if you use a pry bar like the install video show. Wiring was easy to install, only change I made was I drilled a small hole and fished the wires up under the bumper and thru. Eliminating the the need to let the wire hang out under the hatch. I cut the wires and respliced them together. Then siliconed around them to protect against water and rubbing against metal. They now tuck up behind the bumper cover with easy access. I'd say just about anyone can do this install with a couple tools and a little mechanical aptitude.



- 75270
by:
2012 Honda Odyssey

Don't buy. Not suitable for a 2012 Honda Odyssey EX-L using a beautiful Kuat NV 4 bike rack. [The rack] will scratch in most driveways, don't even try rough or dirt roads. It's incredible how a crappy item can damage an expensive one. No one in etrailer thought about testing and disclosing what racks would be compatible or fit well with this model. I sent my order number and feedback to CS and also let Kuat know. I would appreciate that they mention when making their helpful videos.



- 75270
by:

Great hitch, great price, quick delivery. Would buy again without pause.


Comments
After a year of much use I know I made a fine choice. Used mostly for a heavy utility trailer for my neighbors and self, lots of trips and lots of weight. would highly recommend.
Richard - 05/06/2022


- 75270
by:

The original receiver I ordered was not in stock. Customer service was very quick in contacting me and offering a substitute. It was an easy install. The videos posted by etrailer are very helpful! I would definitely buy from etrailer again.



- 75270
by:
Volkswagen Golf

I was caught in a pinch. 5 days before our trip to the beach, found out my 2 nieces wanted to join us for the trip. More the merrier but the space would be tight. We were taking 5 golf club bags with us, which meant 7 people in the van along with 5 golf club bags which would take up the entire trunk space. Needed a cargo carrier ASAP for a much needed space. I had used the hitch from Etrailer before and knew the product was first class, but the time restraint made me hesitate ordering. I called Renee at etrailer and asked about the delivery time frame and she assured me that it usually took 3 days from MO to MD. So I placed my faith in her and placed the order. She made sure the delivery left the premises the same day, about an hour or so to be exact, and sent me a follow up email, with when it was shipped. Sure enough it came to md by Friday morning and I was able to install it that same morning. The attachment was a breeze as it took only 6 bolts to the existing frame to securely attach it. Great job etrailer. The vacation was saved.


40
1796
Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch



  • What Torque Rating Should the Bolts Be Tightened to on Draw-Tite Hitch 75270
    I looked up the instructions for the Draw-Tite hitch, part # 75270, and the torque specification for the 6 M12 bolts is 68 Lb.-Ft. I have added a link to the instructions below so that you can review them. The torque rating is just above the small print on the first page.
    view full answer...
  • Why Does a Trailer Hitch Start to Rust After 3 Years
    Oxidation occurs on steel if subjected to the proper conditions. If the hitch was never outside, never wet, and never exposed to salt brine used to treat snowy roads then theoretically it should not rust. What starts rust normally is the protective powder coat being scratched away which is bound to happen in the process of using the hitch. You can sand away the rust and apply some primer or paint to stop the corrosion from spreading. If the hitch does get salt brine on it or sea water...
    view full answer...
    Image 1 for
  • Torque Specifications Listed in the Instructions For Draw-Tite Trailer Hitch, 2002 Honda Odyssey
    For the Draw-Tite trailer hitch, # 75270, or any of the trailer hitches we carry, the torque specifications can be found after the last step in the installation instructions that are linked on the page. Because the design of a hitch could change or other such changes could be made, this could affect the torque specs. This is why we do not post them on the product pages. But we keep our instructions up to date so the specs in them will always be correct. I have also provided a link to...
    view full answer...
  • Can Draw-Tite Hitch # 75270 Be Installed on 2011 Honda Odyssey Touring With Parking Sensor System
    The Draw-Tite Class III 2 Inch Hitch, part # 75270, will fit your 2011 Honda Odyssey Touring model. Since your Honda Odyssey Touring model has a parking sensor system you will probably want to turn the system off when you are hauling bikes on the hitch. With the system activated it would sense the bikes on the back of the vehicle and activate the sensors, when you put the vehicle in reverse. The hitch is located under the vehicle so the hitch itself will not set off the parking sensors. I...
    view full answer...
  • Honda Odyssey Custom Built Class III Round Tube Trailer Hitch Bolt Sizes
    The custom fit receivers we offer do come with the appropriately sized/pitched bolts. If anything we get phone calls where the 1.25 bolts seem too big. If you have any issues trying to get the bolts into the existing weld nuts on the van we recommend cleaning the holes with a lubricant (like WD40 or PartsBlaster) and a wire brush to eliminate any dirt or debris in the threads. Sometime when doing this installation for local customers we thread the bolt up as far as it will go, remove it,...
    view full answer...
  • Trailer Hitch for a 2007 Honda Odyssey
    The Draw-Tite Class III Round Tube Receiver Hitch, part # 75270 would be a great choice for your vehicle. This is the most popular hitch offered for your vehicle. There is little difference between the Draw-Tite and the Hidden Hitch models of the same class. Both Hidden Hitch and Draw-Tite are owned by the same parent company. The Valley Class III Hitch is very similar in design, and provides the same weight capacity as the Hidden Hitch and Draw-Tite models. The class III hitch has the...
    view full answer...
  • Does Draw-Tite Class III Round Tube Trailer Hitch 75270 Include Hardware
    The Draw-Tite Class III Round Tube Trailer Hitch Receiver, part number 75270, includes all necessary mounting hardware, as well as installation instructions. This hitch utilizes weldnuts, nuts that are welded into the frame at the factory. Before installing the hitch, we recommend you take the time to clean the threads on these nuts. Spray some lubricant such as WD-40 into each bolt hole. After allowing a few minutes for the spray to penetrate, use a wire brush to clean any dirt or road...
    view full answer...
  • Is There a Hitch for a 2009 Honda Odyssey That Has a Crossbar That is Hidden Behind the Bumper?
    Unfortunately, all of the hitches currently offered for your 2009 Honda Odyssey are of the style that would show the cross bar below the bumper. The Draw-Tite Class III Round Tube Trailer Hitch, part number 75270 features a round tube design. In my opinion, the round tube style looks better than the traditional square tube design. If you use the product link below, you can see a photo of what the hitch looks like when installed on an Odyssey.
    view full answer...
  • Where to Find Torque Specs for Installing Draw Tite Trailer Hitch on 2010 Honda Odyssey
    We don't post the torque specs for the hitches we carry as they are subject to change by the manufacturer and since we link the install instructions for all of the hitches directly from the manufacturer if they were to ever change our linked instructions would alway have the correct info listed. So if you check out the attached install instructions link below step 3 you'll see the torque specs listed. Thanks for passing on the info about not needing to drop the exhaust!
    view full answer...
  • Recommended Trailer Hitch Receiver for Bike Rack on 2016 Honda Odyssey
    For your 2016 Honda Odyssey, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75270. This hitch will not require any additional parts to install. It will come with all the hardware, so you just need to supply the tools. I've attached an installation video to assist. For a bike rack, you will have many options. If you let me know the number of bikes and style of rack you desire, I'd be happy to make some recommendations for you. You will...
    view full answer...
  • Trailer Hitch Receiver Recommended for a 2007 Honda Odyssey
    The discontinued Draw-Tite Trailer Hitch Receiver # 75103 is designed to fit Honda Odysseys from 1999 to 2004. For your 2007 Odyssey I recommend the Draw-Tite # 75270. This is a newer version from the 75103. The new version has higher capacities and a cleaner look in my opinion.
    view full answer...
  • Can the Driver Appearance Panel Be Reinstalled on a 2017 Honda Odyssey with Draw-Tite Hitch 75270
    Yes, you can reinstall the driver side appearance panel on your 2017 Honda Odyssey with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75270. However, you will need to make a very small modification which can be viewed at around the 5:10 mark in the attached review video. I have attached a photo of this modification for you as well which is just simply elongating a bolt hole on the panel.
    view full answer...
    Image 1 for
  • Does Draw Tite Hitch for 2003 Honda Odyssey Have Capacity to Tow Motorcycle Trailer
    With any towing setup you are only as strong as your weakest link. The hitch for your 2003 Honda Odyssey # 75270 that you referenced was made with more capacity than the vehicle has but you have to stay under the capacity of the vehicle as well. Only solution would be to tow a small trailer for your motorcycle. While there are front hitches out there for some vehicles they aren't available for every vehicle like yours.
    view full answer...
  • Size of Bolts Used for Installing Draw-Tite 75270
    The size of the bolts that come with the Draw Tite hitch part # 75270 that you referenced is M12 X 1.25 X 35mm. You could use a thread tap to keep the weldnuts clean but you should know that hitch hardware is considered one time use so if you pull out your old bolts you'd have to use new hardware to reinstall the hitch.
    view full answer...
  • Trailer Hitch for a 2006 Honda Odyssey and Black Widow Motorcycle Carrier
    Ground clearance issues are hard to avoid on vans such as your 2006 Honda Odyssey since they sit so slow to the ground. The hitch heights are all going to be relatively the same so it would be best to focus on the capacities of the trailer hitch used. Draw-Tite hitch # 75270 has the 2 inch receiver you are going to need and it is rated for 675 pounds tongue weight. This is higher than the tongue weight capacity of the van though so be sure to consult the vehicle owner's manual for the...
    view full answer...
  • Reattaching Rear Driver Side Panel on Honda Odyssey after Draw-Tite Max-Frame Hitch Installation
    Some models of the 2016 Honda Odyssey do have a plastic panel covering the driver side frame, which appears to be the case on your vehicle. When installing the Draw-Tite # 75270, as you noted, you will need to remove this panel. Once the hitch is installed, you can either leave the panel off or trim it to fit and reattach. Unfortunately, like you discovered, the bolt is not long enough to reach the frame with the untrimmed panel in-between. I did speak with my contact at Draw-Tite and...
    view full answer...
  • What Size Thread Tap Would be Used to Clean Out Threads of 2007 Honda Odyssey for Hitch Install
    The bolts that are used to attach a hitch like the # 75270 to your 2007 Honda Odysey are M12 X 1.25 X 35mm. That means you would need a M12x1.25 size thread tap.
    view full answer...
  • How Much Should the Bolts be Torqued to When Installing the Draw-Tite Receiver # 75270
    The Class III Draw-Tite Max-Frame Trailer Hitch Receiver # 75270, which fits 1999 - 2017 Honda Odyssey vans, will need the bolts torqued to 68 Lb-Ft. I am attaching a link to the instructions as well as a video of this hitch being installed both of which can also be found on the product page.
    view full answer...
  • Recommended Trailer Hitch for 2003 or 2004 Honda Odyssey
    For your 2003 or 2004 Honda Odyssey, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75270. This Class III trailer hitch is confirmed to fit the 1999-2017 Honda Odyssey and no drilling will be required during installation. This will provide a 2 inch receiver opening with a tongue weight capacity of 675 pounds and a towing capacity of 4,500 pounds. I have attached an installation video on the 2003 Honda Odyssey for you to check out.
    view full answer...
  • Should Trailer Hitch Be Reinstalled On 2014 Honda Odyssey For Spacer Placement
    I called my contact at Draw-Tite and asked about the installation of the # 75270 on your odyssey. They told me that the instructions clearly show the spacers placed between the frame rail and the hitch and they recommend having the installation corrected. They told me that the spacers are typically used to accommodate needed space for a fascia which is not the case here, or there may be a small offset on the vehicle frame.
    view full answer...
  • Is a Lift Required to Install a Trailer Hitch on a 2015 Honda Odyssey
    The Draw-Tite part # 75270 would install pretty easily on your 2015 Honda Odyssey. Using a lift like what we show in our install videos would not be necessary. We use lifts to make filming the install easier. Your idea of backing over a curb to give you more clearance is a great idea. Be sure to set the emergency brake and chock the front tires though for added safety. I attached the install video for this hitch for you to check out as well.
    view full answer...
  • How to Remove a Broken Thread Chaser Stuck in a Weld Nut
    I spoke with one of the installers and they told me this has happened with hitch installation on several of the vehicles we put hitches on. The first thing to do is use a punch to get the thread chaser out. Then cut the old weld nut off if it doesn't go with the thread chaser. I found where you purchased the # 87479 hitch from us. If this is the hitch you are working on reinstalling you can contact the manufacturer at 1-888-521-0510 and tell them which hole you are needing the hardware...
    view full answer...
  • Could Draw Tite Trailer Hitch 75270 Be Used to Tow a Tow Dolly
    The Draw Tite trailer hitch part # 75270 that you referenced has a 4,500 lb weight capacity. As long as the weight of the vehicle and tow dolly weighs less than that the hitch would be just fine. You would also need to check the owners manual of your vehicle as well to be sure you do not exceed this towing capacity figure as well.
    view full answer...
  • Troubleshooting The Installation Of Draw-Tite # 75270 On 2008 Honda Odyssey
    This is not a normal fit for the Draw-Tite # 75270 on your 2008 Honda Odyssey. I reached out to my contact at the manufacturer and they said that is a big hitch and it can get tweaked side to side. If it is that side to side that isn't lining up, it sounds like it was tweaked. It should measure 53-1/8 inch center to center on those slots from side to side. If it was way out, it would most likely be a drop during shipping but is possibly a mis-drill, but it sounds really close. To...
    view full answer...


< Previous
123. . .15



Do you have a question about this Trailer Hitch?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Jared G
Test Fit:
Jared G
Employee Andrew S
Test Fit:
Andrew S
Employee Brent H
Test Fit:
Brent H
Employee Mike L
Expert Research:
Mike L
Employee Patrick B
Expert Research:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jeff D
Expert Research:
Jeff D
Employee Reno H
Expert Research:
Reno H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Sarah H
Expert Research:
Sarah H
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Patrick B
Video Edited:
Patrick B
Employee Andrew L
Video Edited:
Andrew L
Employee Dustin K
Video Edited:
Dustin K
Employee Zach D
Video Edited:
Zach D
Employee Andrew K
Video by:
Andrew K
Employee Lindsey S
Written by:
Lindsey S
Employee Laura H
Updated by:
Laura H
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Amanda M
Updated by:
Amanda M
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.