bing tracking image
  1. Trailer Hitch
  2. Draw-Tite
  3. Class III
  4. 2 Inch Hitch
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 76025
lowest price pledge
Our Price: $204.36
You Save: $121.30
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

This item qualifies for Free Shipping
Shipping Weight: 44 lbs
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" Concealed Cross Tube 76025
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. Lowest Prices for the best trailer hitch from Draw-Tite. Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 76025 can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (163)
  • Q & A (0)
  • Photos
  • Why etrailer?

Draw-Tite Trailer Hitch - 76025

  • Class III
  • 2 Inch Hitch
  • 3500 lbs GTW
  • Concealed Cross Tube
  • Draw-Tite
  • 525 lbs TW
  • Custom Fit Hitch

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


  • Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
  • Computer-aided, fully welded steel construction ensures strength and durability
  • Tested Tough - safety and reliability criteria exceed industry standards
  • Easy, bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at
  • Black powder coat finish covers e-coat base for superior rust protection
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately


  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 525 lbs
    • Not rated for use with weight distribution systems
  • Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario. Technical Support

At we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

76025 Draw-Tite Class 3 Trailer Hitch Receiver - Max-Frame

Installation Details 76025 Installation instructions

This Product Fits The Following Vehicles

California residents: click here

Customer Reviews

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" - 76025

Average Customer Rating:  4.7 out of 5 stars   (163 Customer Reviews)

Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.


The product is great. I was quite surprised how destroyed the cardboard box was that delivered my trailer hitch though. The heavy trailer hitch was essentially rolling around in an oversized box with no padding or stuffing. It probably fell completely out of the box at some point (both ends were completely ripped open). Thankfully it’s heavy duty steel, so the product only incurred superficial scratches and paint chips, but the packaging left much to be desired.

I recommend touching up the affected areas with a rust resistant paint which you will then have on hand for regular hitch maintenance
-- Etrailer Expert Jenny N - 04/22/2022


This hitch bolted right up and was a great fit! Sturdy quality and easy installation warrant the high rating. For some reason I could not get the running lights to work. Everything else worked perfectly. Not sure if the harness was incorrect or if I made a mistake with the install. Other than that I highly recommend the product.

I see that you ordered item # C56378
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
with your hitch. A number of things could be the culprit so I would get a circuit tester like item # 40376
Circuit Tester Kit
so you can isolate the issue. The first thing I would check is your ground. Next, I would see if you have blown a fuse. Attached is a help article that explains how to test and find a wiring issue:
-- Etrailer Expert Sierra K - 05/10/2022

2014 Honda Odyssey

There was one small hitch (pardon the pun) with my order, there was no hardware in the box with the hitch. A call to etrailer got replacement hardware sent my way.
Installing the hitch was not difficult, just more involved than the ones that have the crossbar hanging below the bumper. The install video is excellent, I followed it almost exactly. Honda made this vehicle easy to take apart, and the hitch fit very well. I had a helper (age 7) to manage a few of the times where I needed to hold the hitch or bumper beam and get bolts started. Cutting the bumper was no big deal, I marked it with tape and cut it with a Dremel. The end result looks really good, much cleaner than other below-the-bumper models, I'm very pleased.

Ive used this hitch a couple of times, just to transport bikes on a hanging bike rack. The hitch works great, and its very unobtrusive when were not using it. During the install, I guess I didnt hammer the brackets that support the foam flat enough, because there are very slight bumps in the bumper cover. Barely noticeable. Overall, Im very pleased with the hitch, the install, etrailers videos and customer service.
Paul A - 07/26/2018

2016 Honda Odyssey

Love the "hidden" hitch receiver styling. It's barely even noticeable, which is exactly what we were looking for.

As other reviewers mentioned, don't even bother with the instructions included in the packaging. Rely on the video on the product page instead. The paper instructions were nearly worthless.

With the aid of the video instructions, I got the whole thing assembled by myself in about four hours, but a lot of that time was during disassembly fighting various stripped screws and wiring harnesses that didn't want to separate. Two areas of improvement for the video: show the passenger side and working around the exhaust, and use a vehicle with the parking sensors because the passenger side on the Odyssey has some harness clips that I never found a way to pinch to remove (I just swung the bumper to the side rather than fully disconnect it).


Nice product and excellent video directions. I followed along using the video to help me as I haven't done anything to cars besides change headlamps and tires and jump start. Thankfully all the materials were included in my box; it was a bit banged up as per other reviewers but with how heavy the piece is that is sort of expected. I had to purchase a torque wrench and socket extender; the directions say 6" (socket extender) but the auto parts store was out of that length so I got a 10" and it gave me just enough (!) clearance from the ground to work just fine. **One reviewer mentioned on the right side of his car next to the exhaust that the threaded hole was corroded. I found this to be true on my 3-4 year old van as well.** Because of the rust and corrosion, I was initially unable to insert the threaded bolt. I ended up running to the hardware store to get a thread tap. That and a new bolt thankfully (!) fixed the problem. As an aside, it was definitely more worn and corroded on that side of the vehicle than the left, perhaps a function of the exhaust and heat. A rotary tool is certainly the way to go when cutting off the fascia, although I had to get creative since my car wasn't on a lift as opposed to the video's car! I like the clean look and plan on attaching a bike rack to it.

Product still doing great! It’s been used multiple times no issues.
Lena - 03/14/2020


It's been over a year since I purchased this Hitch from etrailer. To begin with, the whole experience of purchase and shipping process with etrailer was very smooth. The written instruction page, along with the etrailer and other videos on[line] regarding the installation was very clear. I was able to install the whole Hitch all by myself in about 90 mins start-to-finish. Since then, I've taken my van on 3 long trips with 4 bikes on the hitch. The hitch performed very well.

2016 Honda Odyssey

Estimate of 80 minutes is optimistic and does require both skill, experience, and a certain tool. I enjoyed the process but somewhat frustrated because I do not have a right hand power wrench as shown in the demo video. This said, the video was excellent. However, to install the wiring harness took extra time.

I think this model #76025, is a great addition to my "new to me" 2016 Odyssey. I have a small (5x8) utility trailer for hauling an ATV. This hitch will be perfect.


The installation was not too bad because of the great instructional video and sheets that came with it. everything went together pretty well. Solid hitch and I love how it looks like a factory add on. I dropped a star because my the 2" receiver is not quite square. it tilts a little bit to the right. I thought it might be because of shipping, because the box was just about destroyed when it got to my house. But, the chain loops and plate where the hitch is attached is square to the bumper, just not the actual receiver. I don't think it is off enough to affect anything though, just wasn't welded up exactly right.


I read all previous reviews thoroughly and watched several installation videos. Since I have a 2014 Odyssey and live in the northeast and was trying to install in 2022, I was already prepared that the bottom bolt holes would be corroded. I purchased both a Lang thread chasing kit (which had the M12 x 1.25) and a tap and die set (had to buy the M12 x 1.25 tap separately). Before disassembling the rear bumper you should just remove the exhaust hanger and try the passenger side rear bolt first. This will save you trouble of reassembly if you have issues with the problematic weld nut.

The driver side one wasn't that bad since it was covered, but I still had to run the thread chaser once to get the bolt to thread all the way.

The passenger side weld nut was much more corroded and I could barely get the thread chaser to start at all. Eventually I was able to get it almost all the way through but it snapped towards the end. I probably should have switched over to the tap. Just remember to go slowly if you are using a thread chaser or tap. If you start to meet resistance, back off and continue. Do not get impatient like me.

I had to take it to a local auto shop to remove the stuck thread chaser and install the hitch.

2012 Honda Odyssey

Just installed this on the van. I am usually a DIY guy, but I sent this one over to our mechanic. The install looks great and I honestly had no idea how low profile this thing was. All you see is the hitch, none of the bars on the side. Very classy looking and hopefully we'll smack against less curb cuts and bumps then other hitches. My only complaint is that the mechanic said he had to remove the bumper cover to do the job and it was overall a larger install than I expected. Maybe they did something wrong but I trust that they know what they're doing over there. I'm a bit confused about how some people said it was a 20-minute install?

The installation instructions say it is an 80 minute installation and that includes removing the bumper beam and reinstalling it.
-- Etrailer Expert Thomas M - 01/09/2022

2012 Honda Odyssey

This install looks more daunting than it really is. I am mechanically inclined, but have never been a fan of body work, so I was concerned about removing the rear fascia. No problem at all, snaps off/on like butter. Also, I like the way the cross bar is hidden, provides a really nice look. This really is a nice product. I have not yet had a chance to pull a trailer, but have used it with a cargo tray. No issues.

This is a great product. We have had zero issues and I really like the look. It is a solid hitch and is just high enough that I havent bottomed out on any drivewaysentrances. I am extremely satisfied with both the product and the helpvideos on this site. I will purchase all my gear from etrailer.
Tommy - 04/27/2019

2011 Honda Odyssey

I did it! 2011 Odyssey touring elite. And I'm in my sixties! First, watch videos to be sure you can do it. I've built things all my life, however I had to install this hitch totally by myself. Videos were great . First removing bumper really was easy after getting clips and 10mm nuts loose. Had to remove .additional connectors for backup and lane departure. Bent bumper tips about a 1/8 inch in were shown in video. Did not bang them in as far as paper instructions suggest. . Loosen top bolts about a half inch and remove bottom ones. Then lift bumper up this will allow bumper to come off, this is shown in video for 2014, but mine is a 2011 and it works also. then if yours is as old as mine, use wire brush to clean nuts holes for bottom support. Took muffler off hanger and it allowed me enough room to use racthet..Tape washers to car as suggested in instructions. Back to hitch, lift it and install new bolts in top holes only. First on passenger side, then other side. Just in deep enough to hold hitch.Install hitch bolts under car, I did driver side first, made it easier working around muffler. Now place bumper on top bolts, this will allow you to install lower bolts and washers. Now remove top bolts add washers and reinstall. I used inside bumper cover guides I think there 5 inches a part, found center. I traced diagram of cutout on outside of cover, then used utility knife ( new blade ) to cut. like butter. muffler cutout was easy from inside. Reinstalled bumper, don't forget to connect connectors, both sides on my van. Followed steps in video and was done. No extra parts and it took me only about 4 hous to complete. Looks factory, and I did it at my own pace. Great product and company, they had it to me in 4 days, lost tracking service and support center verifed it was on its way . Then they called the day it was to arrive, just to be sure it had. Wow, great customer support. Highly reccommend etrailer. Now for the wiring I found a plug in the van that I plan to use for wiring (picture shown). then towing a small bowrider for the grandkids, and me.

2015 Ford Flex

OK...let me first state I'm very happy with the final result! Installing this hitch was battle but that wasn't the hitches fault. I reviewed the video to get the general idea of what I was doing and dove right in.

The facia and rear bumper came off as expected. I had some trouble getting the electrical plugs off but managed without breaking anything (I have the sensors in the rear facia). Everything was prepped and ready and that's where the trouble started.

First, I noticed that since the right rear side has no under-body plastic shield (that's where the exhaust is...duh), Honda, or someone, had sprayed a bunch of this rubber that Flex Seal stuff. I'd assume to give the frame some extra corrosion protection since it is exposed to the elements. As such, I had to cut away a chunk of the stuff to allow the large spacer block to sit properly in between the frame and the hitch. That was minor and I expected that sort of deviation but the next part was killer.

I started to thread the larger bolt on the right side (read in one of the reviews to do this to make sure it could thread before trying to install everything...glad I did) only to notice that, no matter what I did, it wouldn't go in. Upon inspection, I noticed the hole and threads were completely corroded with rust. It took the next 2 hours, a small can of WD-40, and an electric impact driver to get it sorted out. More than once I thought I was in over my head and thought I should take it to a professional. What I wish is that Honda would put a plug in those holes on the right side that are unprotected. It would cost the company may be less than a penny and maybe 2-3 seconds on the production line to protect those holes. Then someone like me would be very thankful that Honda was thinking ahead and sing praises of the company for being awesome. BUT that was not to be!

In any case, with the help of a friend, I got the hitch/bumper installed, torqued to the correct specifications, and the facia back in place.

It looks sharp and I am very pleased with the results. I love the clean look! I decided to run the wiring harness through the hole just left of center. The gromet there is made of rubber and it was very easy. I did have to cut and splice the 4-conductor wire which is a no-no according to the instructions but I don’t care. The thought of seeing the harness come out of the bottom of the door seems really ghetto to me and what I did looks more professional. T-One should really make that an option somehow.

If you want to run the harness the way I did, do it after removing everything but before installing the hitch. It was easier to fish the wires.
Good luck and have fun! Cutting the facia was nerve-racking but not bad so don't let that scare you off.

My only critic was the condition of the box when it arrived. The box looked like it had been run over by a Sherman tank! A huge hole was ripped in the top as if someone was trying to get at something inside (everything I ordered was there…whew). The powder coating on the hitch was damage in a spot or two but that was very minor.

2013 Honda Odyssey

Hi, I was able to get this hitch installed on my wife's Odyssey without too much trouble And it works great with our Thule T2. I've been telling all my friends that etrailer is excellent. I just realized that when my wife goes out of town with the kids it will be a great time for me to do some mountain biking but she will be driving the Odyssey with the hitch. I guess I need to order another hitch for my Honda Accord. Got any discount codes you could send me?

2012 Honda Odyssey

Hitch was not a perfect fit for my 2012 Odyssey. The shims supplied with the hitch were too wide and interfered with weld seams requiring modification to fit correctly. Once installed, hitch is tucked up nicely under bumper. Looks as good as OEM.

Still very pleased with the product after 1 year. I did add a simple preventive measure to keep the tail gate from getting scratched if accidentally opened when the the carrier is in the upright position. A piece of pipe insulation and a nylon tie strategically placed.
Scott - 07/07/2018

-- Etrailer Expert Rachael H - 7/9/2018

2012 Honda Odyssey

I just installed my hitch today on my 2012 Honda Odyssey. It took me about 3 hours start to finish. I am extremely happy with the result and I'm SO glad we decided on the clean, hidden frame on this Draw-Tite hitch. It looks so good and almost identical to a factory install. Just a few tips after having done it once with the video:
1. The right side of the car near the muffler didn't have much info about it in the photos or video. It would have been great to have some tips about removing the rubber muffler mount in order to get access to the bolt that needs to be torqued to xx ft-lbs. Just spray some WD-40 on the rubber hanger and it will slip off the hanger with a little effort.
2. After you cut out the areas of the fascia, use a plastic brush tool on a Dremel or similar rotary tool at medium speed to clean up the rough edges. It works really well and gives a nice clean edge. See photo below.
3. When you hammer the bumper beam projections, don't do it straight on. If you hammer from the side, you will be able to flatten them almost completely and it looks so much better. See photo below.

Honestly the hardest part of this project was putting the mud flaps back on and aligning the holes. Everything was so easy and well instructed in the video. I HIGHLY recommend this option if you want a nice clean finished look on your hitch without the frame hanging down in plain site. The few extra steps and extra work are WELL worth the effort.


Great product, easily installed it myself on my 2015 Honda odyssey , I like that it’s more concealed and up higher for better ground clearance than other bumper hitches, looks professional from the factory on my van. I can now pull a trailer and haul my bicycles with a bike rack. They have a nice video on their website that helps you to install correctly .

2016 Honda Odyssey

The product was professionally installed but it didn't go well and the finished installation looks sloppy with the bumper cover bending over the hitch receiver.

It looks like the installer forgot to trim the fascia. This particular installation requires a 3.0’’ tall by 8.5 cut out of the bottom panel according to the installation instructions.
-- Etrailer Expert Heather A - 07/13/2020

2015 Honda Odyssey

I am greatly impressed with the product.
fits and looks great on my Honda Odyssey 2015.
It is high quality and worth every penny!

Installation was pretty simple overall. The only complications were as follows (See photo of bumper beam:
The heads on the bolts that come with the hitch are larger than the Honda factory ones. This makes getting them through the access holes in the bumper beam (marked in red) difficult as the result of larger heads is needing a larger socket which does not fit through the aforementioned access holes.
You will most likely need a "thin-walled socket" with a 6 inch extension to get those in. Additionally, if the bolts won't start and are cross threading, get a small socket on your extension (one that does not fit around the head of the bolts), take some double sided tape, and use it to stick the bolt to the socket. Now gently insert the bolt into the hole and begin to turn at a cautious pace. If it's not going in you'll now have room to adjust the bolts pitch/angle because of the smaller socket. Once you get the bolt threaded you can use a regular (thin-walled) socket to tighten to the appropriate torque (do not tighten any bolts until they are all started). Also if the bolts wont seem to thread check that the hitch mounting holes are positioned correctly. If they are off too much they will get in the way of your bolts.

I shaved the corners (marked in yellow) on the bumper beam using an angle grinder about 1/8 inch to make the bumper cover fit better (took about 30 seconds to do all 6 corners).


I could not be happier. A picture is worth 1000 words. This hitch looks better than the factory installed ones. Katie D. from etrailer was extremely knowledgeable and gave sound advice so that the job turned out perfect!

You will need to have advanced skills to install this hitch. I recommend that the install is performed by a professional installation center.

2014 Honda Odyssey

Easy to install and looks great. So much better looking then the ones with the huge beam across the back. It took me about 2.5 hours by myself and I haven’t done something like this before. I didn’t lift the car off the ground although that would have made it easier. Next time I would probably back it up to a curb and have the back end hanging off to give me 6 more inches. The instruction video was awesome. The only tricky thing to me as putting back in the trim panel pins that hold in parts of the plastic on. I found it easier to remove the pin into the two parts and get the first part in first then push the pin through. Overall I would highly recommend the hitch and the installation wasn’t that bad.


Great package at a really good price. This is a two person job as the instructions and video say. So 80 minutes was more like 4 hours for me working alone. If you are like me and don’t like the “leave the wiring inside” mentality. There is a pop-out that will allow you to run the wiring outside without having to cut any cables. Also do a field fit before cutting the fender. I measured the bumper thinking the tabs were centered. They are not. Have someone hold it up for you and mark he edges then drop it down and cut the 3” depth.

Honda Odyssey

Well built, quality product, However, you should be clear in your promotional materials that sections of the Honda Odyssey bumper needs to be physically altered to avoid inadvertent dimpling of the bumper skin.


We've had ours for a year. It's worked very well. I got my local mechanic to install for a fraction of what a dealer would charge.

There's been no rusting, and it routinely carries our 4 bikes.

Thank you!


My top priority in selecting a hitch was to have hide the crossmember and have it not hanging under the bumper. Installation for this one was more work than it would have been for others, but for me it was worth it. As the photo shows, only the receiver is visible.

Show More Reviews

Ask the Experts about this Draw-Tite Trailer Hitch

  • Install Video and Instructions for Draw Tite Hitch 76025
    I attached a link to the install video for the Draw Tite hitch part # 76025 as well as a link to the install instructions for you to check out as well.
    view full answer...
  • Is Bumper Beam Modification Needed to Install Draw Tite Hitch part # 76025
    I attached a picture that shows the modification needed to the bumper beam bracket. Exhaust lowering is not needed to install the hitch either. You will need to use the washers like what is shown for the install of the # 76025 on a 2016 Honda Odyssey like what is attached below.
    view full answer...
    Image 1 for
  • Is the Install of the Draw Tite Hitch 76025 the Same Between 2012 and 2014 Honda Odysseys
    The Draw Tite hitch part # 76025 that you referenced is a confirmed fit for your 2012 Honda Odyssey. It would install exactly the same as the video that shows the hitch installed on a 2014 Honda Odyssey. I checked the install instructions and there aren't any special steps between the two different years. 2012 and 2014 Odysseys are the same generation and the frame area where the hitch installs is the same between the two. I attached a link to the video you mentioned as well.
    view full answer...
  • Class III Trailer Hitch Recommendation for 2014 Honda Odyssey for Best Ground Clearance
    For ground clearance the Draw Tite part # 76025 is going to be the best option for your 2014 Honda Odyssey. Reason being that it only has the hitch tube hang down whereas the other hitches have crosstubes and mounting brackets that hang down as well. That means more opportunity to drag, especially on angles like turning into a driveway with an incline. I attached an install video for you to check out as well.
    view full answer...
  • Installing Draw-Tite Max-Frame Trailer Hitch # 76025 on 2017 Honda Odyssey with Lift Gate Sensor
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 76025 referenced in your question is confirmed to fit your 2017 Honda Odyssey. It features a sleek, hidden crosstube design, but this feature does require more of an in-depth installation when compared to the other options available. Because the custom-fit hitch will use existing holes in the vehicle's frame, no drilling will be required. The underbody panels/fascia will need to be temporarily loosened or removed and the process does require...
    view full answer...
  • Which Install Video is the Best to Follow when Installing Trailer Hitch 76025 on 2015 Honda Odyssey
    On the 2014 Honda Odyssey our installer has seen some cases where those center structural squares, for lack of a better term, can push out on the fascia some so he bent in the corners a little. What I recommend is to follow the written instructions. Once you have the fascia snapped into place (but before tightening all the hardware) you will be able to tell if you need to follow the video and bend in those squares. If it were me this is what I would do.
    view full answer...
  • Installation Instructions for the Draw-Tite # 75155 on a 2008 Toyota 4Runner
    The Draw-Tite trailer hitch that fits your 2008 Toyota 4Runner is part # 75155. I am not sure what information you are needing for the installation but I have attached the instructions to this page for you to check out. If you let me know what you are specifically needing help with I can try to offer some clarity.
    view full answer...
  • Will Changing Hitch on 2013 Honda Odyssey Help With Ground Clearance
    The Draw-Tite Trailer Hitch Receiver, # 76025, that fits the 2013 Honda Odyssey will give you more clearance than the Draw-Tite # 75270 hitch. The # 76025 hitch sits higher up under the bumper which will give you more ground clearance. In our installation video, that I have attached for you to review, the Draw-Tite hitch # 76025 shows having a 13-1/2 inch distance from the top of the receiver to the ground. This hitch would give you an extra inch of clearance over the current model hitch...
    view full answer...
  • Comparing OEM and Aftermarket Trailer Hitches for 2014 Honda Odyssey
    Draw-Tite 2-inch Class III hitch # 76025 and the other hitch options shown on the linked page are all confirmed to fit your 2014 Honda Odyssey. I do want to point out that installation of this particular hitch will be more involved than for the similar model # 75270. This other 2-inch model will take less time to install, costs less and actually has a higher weight capacity rating. I would highly recommend this model instead of part # 76025. The linked install video shows this item on a...
    view full answer...
  • Is the DrawTite Hitch # 76025 a Good Choice for Use with Bike Racks
    The Draw-Tite Max-Frame Trailer Hitch Receiver part # 76025 is the hitch I had on my old Odyssey and I had no issues with it at all even with bigger bike racks or my boat attached. A bike rack would not cause any type of noticeable hitch deflection unless it was loaded above the stated capacity. I have linked the installation video for you to check out.
    view full answer...
  • Concealed Trailer Hitch for 2014 Honda Odyssey
    The Hidden Hitch receiver # 70737 used a special muffler pin plate as part of the hardware kit, so while the hitch is a fit for your 2014 Honda Odyssey, it's impossible to get the complete hardware for it anymore as these have been discontinued for some years now. The hitch you have was redesigned/replaced by the Draw-Tite Max-Frame Trailer Hitch Receiver # 76025. So, if you need a hitch for your Odyssey, and are looking for one that has a concealed look, that's the one I recommend. All...
    view full answer...
  • Which Trailer Hitch for a 2014 Honda Odyssey Offers Most Ground Clearance
    The trailer hitch that offers the most ground clearance for a 2014 Honda Odyssey is the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76025 which I also really like because it has a hidden cross tube that will look the best once installed since it's not visible.
    view full answer...
  • Bolts Will Not Install on Draw-Tite Hitch on 2013 Honda Odyssey
    The bolts are correct for the Draw-Tite Trailer Hitch # 76025 that fits your 2013 Honda Odyssey, and it's not an unusual problem for the bolts not to completely fit into the holes during a hitch installation. What you need to do is use some lubricant and the Nylon Tube Brush # 814092 to clean the bolt holes, as they have accumulated dirt and other grime that makes it difficult to get the bolts started. I have added a link to a help article for you to check out as well which has some...
    view full answer...
  • Are there Bouncing Issues with the Draw-Tite Max-Frame on a 2014 Honda Odyssey
    We have not had the complaints that you mentioned for the Draw-Tite Max-Frame, part # 76025. Most of the reviews from our neighbors stated that it's a very sturdy hitch even a year later. Several people have used this for bike racks with great success. There may be something with the bike racks themselves for those in the forums. One thing you can do is use the Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories, part # 18050. This strap significantly reduces the up-and-down...
    view full answer...
  • Differences in Draw-Tite #75270 and #76025 Hitches for 2011 Honda Odyssey
    There are several differences between the Draw-Tite # 76025 and # 75270 Max-Frame Trailer Hitch Receiver - 2" for your 2011 Honda Odyssey. The # 75270 has a higher maximum gross trailer weight at 4,500 lbs and tongue weight at 675 lbs. This hitch can also be used with weight distribution to increase the trailer weight by 500 lbs, unlike the # 76025 hitch. The # 76025 has a concealed cross tube, where the # 75270 has a visible cross tube. This allows for better overall clearance on the...
    view full answer...
  • Recommended Hitch for VelociRAX 5 Bike Rack on 2012 Honda Odyssey
    From what little I was able to learn about the VelociRAX 5 bike rack on their website, the rack is compatible with a 2 inch hitch that has a tongue weight capacity of at least 500 lbs, and the Draw-Tite # 75270 Class III hitch meets both those parameters, so you're good there. However, might I make a suggestion? Instead of the # 75270, you might consider the # 76025 instead due to its greater ground clearance and because it isn't recessed under the vehicle as far. The hitch will be more...
    view full answer...
  • Recommended Trailer Hitch And Wiring Harness For 2016 Honda Odyssey
    For your 2016 Odyssey I recommend the Draw-Tite Max-Frame Trailer Hitch part # 76025. This is a Class lll hitch and it has a 2 inch receiver opening. The newer design of this hitch helps make this hitch one of the more concealed hitches on the market. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch...
    view full answer...
  • Is Torque Wrench Needed When Installing Draw Tite Hitch # 76025
    You really need to use a torque wrench when installing a trailer hitch like the Draw Tite part # 76025. We have some you could order with the hitch like with part number # ALL944001 or local auto parts stores will often times let you borrow them as well. There's no other safe way to determine the correct amount of torque needed.
    view full answer...
  • Trailer Hitch Interference with Backup Sensors on 2012 Honda Odyssey Touring
    Draw-Tite 2-inch hitch # 76025 is a confirmed fit on your 2012 Honda Odyssey. This and the other 2-inch hitch options for the car are shown on the linked page. The hitch I suggest over the one you referenced is the Draw-Tite # 75270. This offers a lower price, higher weight capacity and a substantially easier installation. It's cross tube will be visible under the rear bumper, but if that cosmetic difference is not critical, go for the # 75270 for the easier install. A video is linked for...
    view full answer...
  • Recommended Ball Mount With Rise for 2015 Odyssey with Draw-Tite Trailer Hitch
    Just to make sure we are accurate on the actual rise you may need, lets cover some basics. With the tow vehicle parked on level ground, measure from the ground to the top of your hitch receiver opening. Then, with the trailer level, measure from the ground to the bottom of the coupler. The difference between these hights will determine how much you will actually need. I have a diagram attached to this article showing how this process is done. I also have a video linked showing hitch height...
    view full answer...
    Image 1 for Image 2 for
  • Recommended 7-Way Wiring Connector Mount for 2017 Honda Odyssey with Hidden Receiver Crossbar
    The Draw-Tite Max-Frame Trailer Hitch Receiver # 76025 does have a nice clean look on the 2017 Honda Odyssey. To add the 7-way connector, I recommend using the Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch # C58000. This will allow you to access the hitch pin and safety chain loops while still giving you a clean mount for your 7-way.
    view full answer...
  • Hitch and Wiring Harness Installation in 2016 Honda Odyssey Touring Elite
    All of the hitches offered for the 2016 Honda Odyssey Touring Elite, shown on the linked page, will install as close to the bottom of the bumper cover as possible. The Odyssey and similar vehicles like the Toyota Sienna have a low-slung rear end without a lot of extra clearance so all hitches designed for this vehicle need to have a fairly snug fit under the bumper. Among the 2-inch options, there are hitches that have different installation processes. Draw-Tite # 75270 may require some...
    view full answer...
  • Is Fascia Trimming Required To Install Draw-Tite Hitch On 2014 Honda Odyssey
    In order to install the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76025 on a 2014 Honda Odyssey you"ll need to trim the fascia in the center to allow the receiver tube opening to pass through and above the tail pipe. The reason you must trim the portion of the fascia above the tail pipe is that the hitch will come into contact with this piece if not remove. It is possible not to remove this piece but by not doing so you"ll put stress on other parts of the bumper which can lead to...
    view full answer...
  • Replacement Hitch Installation Hardware for Draw-Tite Hitch on 2012 Honda Odyssey
    It sounds like you might be trying to re-install a trailer hitch on your 2012 Honda Odyssey; I have a solution for you to get a replacement hardware kit but we don't have individual bolts available. You can get a replacement hardware kit for your hitch by using part # RHK and then putting the model number of the hitch you've got in the field where it says "Hitch Item Number". For example, if you have a Draw-Tite # 76025, you'll put that number in that field. I've linked all of the potential...
    view full answer...

< Previous

Do you have a question about this Trailer Hitch?

  • Why

    At we guarantee:
  • Highest quality trailer hitch for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hitch information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Lindsey S
Edited by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Zach D
Video Edited:
Zach D
Employee Randy B
Test Fit:
Randy B
Employee Brent H
Test Fit:
Brent H
Employee Ryan G
Test Fit:
Ryan G
Employee Leah S
Updated by:
Leah S
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Alexander C
Written by:
Alexander C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.