Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
(801 reviews)
Price: $204.06
In Stock
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Item # 76031
Retail:$229.99
Our Price: $204.06
You Save: $25.93
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (801)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 76031
- Class IV
- 2 Inch Hitch
- 6000 lbs GTW
- Visible Cross Tube
- Draw-Tite
- 900 lbs TW
- 6000 lbs WD GTW
- Custom Fit Hitch
- 900 lbs WD TW
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Integrated mounting point lets you attach a bracket for a 4-way or 7-way plug (sold separately)
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 900 lbs
- Maximum TW when used with weight distribution: 900 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
76031 Draw-Tite Class 4 Trailer Hitch Receiver - Max-Frame
Replaces 75750, 87625
Installation Details
This Product Fits The Following Vehicles
- 2013 - 2013 Infiniti JX35
- 2013 - 2020 Nissan Pathfinder
- 2014 - 2020 Infiniti QX60
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" - 76031
Average Customer Rating: 4.8 out of 5 stars (801 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.by: Earl04/07/2023
This was purchased for our 2020 Nissan Pathfinder. The fit and alignment of this receiver was perfect for the vehicle. All of the hardware was provided and everything was of excellent quality. The installation was quick and easy and the instructions were well written and easy to understand. Having an extra pair of hands to help get things started and to line up the receiver will make it that much easier. Took less than an hour total to install. There was a few spots on the lower bumper that needed trimming which was accomplished with the use of a Dremel tool and some masking tape. Just take your time and mark the areas. This receiver is only used for a bike rack so there was no wiring involved or needed. We are extremely pleased with this and would definitely recommend to anyone needing a receiver.
by: David10/23/2023
2017 Nissan Pathfinder
The hitch was well packaged and only took a little longer than advertised for installation. The installation was straightforward. The instructions were on target and made the job go well. The hitch looks good as it sits tight to the bumper.
by: Jonathan 10/21/2022
My second trailer hitch from etrailer. Installed it again no problem. Thanks again.
by: Wesley10/09/2022
It fits and works so well. There was nothing wrong with the hitch. Just some of the bolts would not thread into the stock holes in the Nissan Pathfinder. After my two sons and I each tried for 30 min to get them to thread correctly we just used an impact wrench and screwed them home. It is solidly mounted. We use it daily with our 4 bike rack and it is awesome!
by: Ali10/25/2023
2018 Nissan Pathfinder
High quality hitch receiver and easy to install. Did not have to trim anything on my Pathfinder. Fast shipping and excellent customer service (had an issue with the weld nuts on my vehicle being rusted, and customer service was very helpful).
by: Steven 11/01/2023
Easiest hitch install imaginable. Working alone, it still only took me 30 minutes to get the hitch installed. I haven't done the wiring kit yet but expect it to take a little more time as I'll need to remove the trunk plastic.
by: Vince 11/27/2023
Always my go-to for excellent product descriptions and very useful installation videos giving us DIY’s the confidence to tackle jobs based on their difficulty ratings and tutorials.
Competitive pricing as well.
Etrailer is doing business right.
5 stars.
by: William 11/05/2023
Excellent Price, Very easy install and perfect fit! The only issue was the trip to Harbor Freight for a 6 point socket to remove a tie down bracket on the left side of the frame that had to be removed for the install. It was awesomely tight!! Thanks, Bill
by: Bob G09/22/2023
2019 Infiniti QX60
The trailer hitch arrived in 2 days with installation instructions and hardware. It is heavy-duty and should work perfectly. I have had good luck purchasing for e trailer in the past also.
by: Ann 09/16/2023
Infiniti
It was easy to install on my car, Infiniti JX 35 and I use it for my bike rack. Just what I needed
by: Simon05/13/2022
2015 Infiniti QX60
Came on time box was in perfect no damages or scratch on unit, bottomed second video demonstration was very good explained how to assemble the hitch on your car. I love the produce makes perfect fits on vehicle. It did take me less than 40 minutes to installed. I will recommend this website to anyone to do purchase from this website.
Simon S.
5/14/2023
it still excellent shape.
by: D. Mac11/12/2018
2018 Nissan Pathfinder
Receiver Fit perfectly, it required removal of the OEM tow eye bracket, not needed after receiver is installed. Pushes up slightly on the bottom of rear plastic bumper. Bought 7 Pin Plug, harness and plug mounting bracket. Mounting bracket didn't match the DrawTite hitch mounting and required additional hole to be drilled compromising the sealed painted surface.
D. M.
11/13/2019
Additional mod was to mount rear gate sensor underneath the hitch receiver with wire ties and nylon spacer blocks. Sensor doesnt work when in contact with metal.
by: Kimber 08/21/2019
Hitch is ok- does the job. Biggest complaint is that the powder coating on the receiver is flaking away leaving RUST that is low on the outside, (not a good look!)as well as traveling inside the opening. The only thing I even use the hitch for is a hitch hauler which has been hooked up maybe 15 days total over the year. So... ok hitch- looked good for a minute.
Victoria B.
8/26/2019
To keep your hitch looking great and to help prevent the spread of rust, we recommend using a rust-inhibiting black spray paint to touch up any rust spots starting to develop on your trailer hitch. I have also linked a help article on rust prevention for your convenience.
Helpful Links
by: Matt W07/07/2018
2017 Nissan Pathfinder
When it is installed, it looks like it was meant to be there. It took three of us to get it in place and installed. Lining the mounting plates with the weld nuts was a little tricky. Once we finally got all six bolts started, the install was easier from there.
The install video on etrailer.com's website was a nice guide. It gave me confidence in believing I didn't have to hire out the install.
Matt W.
7/7/2019
I have used a few different trailers over the past year and felt confident hauling each one. I have had no issues with this receiver. I am confident it will last for years to come.
by: Jay09/27/2023
2019 Nissan Pathfinder
Excellent products, excellent prices and fast shipping. Can't beat it. Thank you etrailer.com!
by: Elizabeth06/18/2022
The hitch fit perfect on my 2019 Pathfinder. It was easy installation. My 17yr old son and my 4yr old grandson installed it. I ordered the hitch extender because the cargo basket was a little to close to my bumper for my liking.
by: Vinnie C07/27/2023
Great on line installation video and easy to determine the correct products to but specific to your vehicle
by: Jimmy 05/27/2023
2017 Nissan Pathfinder
Easy to install. I went to the dealer and other shops and they were charging 4 times what I paid with etrailer. I saved money and the hitch is perfect! Highly recommend it!!!
by: AJC09/09/2016
2015 Infiniti QX60
I ordered this for my 2015 QX60. Shipping took just over a week and everything arrived in good shape. I have to say, this is an awesome hitch with no drilling or bumper modification at all. My only comment would be is that the bolts used to mount the bumper are 19mm not 18mm as indicated in the instructions. The bolts I needed to remove the existing tie-down brackets were 18mm so maybe that's the confusion. I called the manufacturer and they confirmed the 19mm bolts.
I propped up one side to make it easier for a one-man install and tighted things down with a traditional ratchet before breaking out the torque wrench. Kudos to etrailer.com for providing a great DIY hitch at a great price. I'm already for tailgate season now!
by: Robert03/26/2017
2013 Infiniti JX35
Very easy to do business with etrailer. Receiver hitch was delivered earlier than expected. Installed easily after cleaning the threads on my vehicle. They were rusted and corroded from being exposed to road elements. I purchased the receiver to use with a bike rack and it holds the rack very securely. It is low profile enough that it doesn't stick out or reduce clearance. Also, did not have to worry about making any modifications to accommodate the receiver.
by: Edison J09/30/2016
2014 Ford Edge
Received the hitch on time and good condition (no box damage either). Waited a few days to install due to weather/heatwave in our area. My Infiniti QX60 sits low, so to compensate and get a good height to install, I just backed in and let the back tires sit on the edge of the garage entrance (sloped driveway helps). Started to remove the 4 bolts that holds the tow hook, but they were super tight! I almost gave up, but had an idea to use the torque wrench and it worked! Then, propped up the hitch with a small step stool and screwed in one bolt on right side, then one on the left. When all bolts were screwed in, I used a cordless impact wrench to just lightly tighten then bolts. And finally used the torque wrench to tighten them to specifications (76 ft-lbs). Very happy with the install and hitch looks great in my QX60!!
by: Joe V06/21/2017
2017 Nissan Pathfinder
Perfect fit for our 2017 Pathfinder.
Kudos to etrailer.com for the software on the back end that so accurately matches their products to specific year, make, model, and trim. Double kudos for all of the videos...
The reviews are great for showing the features of the products, answering questions before they're asked - way better than wading through FAQ's. And the installation videos... Wow! Walking through the installation videos is what made me decide to buy and DIY. I had thought of hitch installation as something that required drilling and cutting and welding. I had always thought "Take it to a place that does hitch installation, it's not a DIY project". After watching the video, I saw that, at least on our Pathfinder, it's quick, easy thing to do with the tools I've already got. It's installed and looks great. Thanks!
by: kevin r11/11/2013
the hardest part was getting my teenager down to the garage to help.
installation was extremely easy. remove the 4 bolts holding the tow bracket, hold the receiver up to the frame, and bribe a teenager help run up 2 bolts to hold it in place, then install/tighten up the remaining 4 bolts and you're done.
entire installation took 20 minutes and could probably be done by a trained monkey.
pictures are of the tow bracket (removed, does not get reinstalled), three of the 6 bolts that hold it in place, and the receiver in place.
by: James F.07/25/2016
My hitch arrived sooner than expected and was flawless. It came complete with everything needed to finish the job. One piece of advice would be to start a bolt on the drivers side to hold it in place. Then install a bolt (on the passenger side) closest to the muffler bracket. it will make your life easier. If the bumper fascia rubs on your new hitch you can remove the brackets (only two bolts per bracket) holding it in place and bend them up slightly, then reinstall the bracket.
by: Bruce09/29/2020
This was quite the deal. Estimate was $750.00 for have a trailer installer to install a hitch and plug. My Draw-Tite is exceptional. Looks great. Since I didn't use a lift, and my wife helped me; installation was a wrestling match. The hitch is heavy. Directions are weak and of course they have 6 different languages. However, simple installation. Six bolts to install. One part does need to be trimmed. Used the same cutter displayed in the video.
25
804
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Does Draw Tite Hitch # 76031 Interfere with Hands Free Liftgate of 2017 Nissan PathfinderFor your 2017 Nissan Pathfinder the Draw Tite hitch part # 76031 will not interfere with the hands free liftgate feature you have. Basically you'd just have to kick to either side of the hitch opening to activate the rear hatch. I attached an install video for this hitch on a 2017 Pathfinder just like yours for you to check out as well.
view full answer... - Does Adding a Trailer Hitch Receiver Lower the Value of a VehicleWe've never heard of a hitch receiver decreasing the value of a vehicle. Many hitches, such as the Draw-Tite # 76031 that you referenced for a 2014 Infiniti QX60, do not reduce the frame's integrity since they do not require drilling. They're actually using an existing hole and filling it with a bolt. In the event a specific hitch does require drilling that drilled hole will also then be filled by a bolt. On the other hand, depending on who is purchasing the vehicle, adding a hitch...
view full answer... - Will Draw-Tite Hitch Interfere With Hands-Free Sensor on 2017 Infiniti QX60?You will still be able to use the hands-free lift gate sensor on your 2017 Infiniti QX60 with the Draw-Tite Max-Frame # 76031 installed. It won't be necessary to move it; simply perform a kicking motion and the lift gate feature will perform as usual. I have added a link to a video install of this hitch for you to take a look at.
view full answer...
- What is Trailer Weight Capacity of Draw Tite Hitch for 2018 Nissan Pathfinder For your 2018 Nissan Pathfinder the Draw Tite hitch part # 76031 has a towing capacity of 6,000 lbs. You will need to check the owners manual of your vehicle to and be sure not to exceed the lower of the two figures between the vehicle and the hitch. Reason being your capacity is only as high as your lowest rated component.
view full answer... - How Much Does Draw-Tite Hitch # 76031 for 2013 Nissan Pathfinder WeighThe shipping weight of the Draw-Tite Max-Frame Trailer Hitch Receiver # 76031 is 36 lbs. I can also confirm it fits your 2013 Nissan Pathfinder, as shown in the linked installation video.
view full answer... - Will the Bumper Fascia on a 2017 Infiniti QX60 Need to be Trimmed When Installing Draw-Tite HitchWhen installing the Draw-Tite Class IV Custom-Fit Trailer Hitch, # 76031, the bumper fascia will not need to be trimmed. The installation instructions do not list trimming the bumper fascia as one of the steps of the hitch installation. This hitch when installed will sit below the bumper and will not interfere with any of the body molding of the vehicle. As for installing this hitch on a lease vehicle, I recommend checking with the dealer that you purchased the car from to see if they...
view full answer... - What Draw Tite Hitch is Confirmed to Fit a 2013 Nissan PathfinderThe correct Draw Tite hitch for your 2013 Nissan Pathfinder would be the part # 76031. If you check out the product pictures you should be able to get a pretty good idea if the hitch you have is the same overall design. Also, there should be a part number listed on the sticker that is on the passenger side cross tube. What can happen is the hitch will get slightly bent in shipping and the mounting brackets end up not lining up perfectly with the vehicle. As long as you don't see any creasing...
view full answer... - How Does the Draw-Tite Max-Frame Trailer Hitch Receiver Install on my 2013 Infinity JX35This is definitely a hitch that can be installed at home. I have included the installation video my buddy Evan did installing the hitch on a 2013 Infinity JX35 like yours. It uses factory weld nuts to attach it to the vehicle. If yours is equipped with a factory tow hook that will need to be removed but it is a very easy process.
view full answer... - What is Best Way to Deal with Rusty Weld Nuts When Trying to Install Trailer Hitch The best and fastest way to clean out rusty weld nuts where a hitch installs on a vehicle frame is with a thread tap. Assuming you are trying to install the Draw Tite hitch part # 76031 that you referenced that would mean you'd need a thread tap in the size of M12x1.25.
view full answer... - No Drill/Trim Hitch Recommendation for 2018 Infiniti QX60With a Draw Tite hitch like the part # 76031 that fits your 2018 Infiniti QX60 there will be no drilling and if there is an evaporation canister present you'll have to manuever around it while installing but it does not need to be removed. The clearance will be tight though. The installation instructions do not list trimming the bumper fascia as one of the steps of the hitch installation either. This hitch when installed will sit below the bumper and will not interfere with any of the...
view full answer... - Will the Draw-Tite # 76031 Interfere With Liftgate Sensor on a 2017 Nissan PathfinderAlthough the Draw-Tite Max-Frame Trailer Hitch Receiver # 76031 will not keep the liftgate sensor from activating on your 2017 Nissan Pathfinder, you will need to kick to either side of the receiver instead of just waving your foot under the bumper to get the sensor to pick up your motion.
view full answer... - Will the Hands Free Liftgate Work With the Draw-Tite Hitch 76031 on a 2018 Nissan PathfinderYes, the hands free liftgate feature on your 2018 Nissan Pathfinder will still be functional with the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76031 installed. However, in order to activate this feature you will need to place your foot on either side of the receiver tube opening which I have attached a photo of for you. This will be the case for the majority of vehicles with the hands free liftgate feature like your Pathfinder. The Draw-Tite Max-Frame Trailer Hitch Receiver is...
view full answer...
- What Vehicles Does Draw Tite Hitch # 76031 FitThe Draw Tite hitch part # 76031 that you referenced fits the following vehicles: 2013 - 2013 Infiniti JX35 2013 - 2019 Nissan Pathfinder 2014 - 2019 Infiniti QX60
view full answer... - Ground Clearance When Installing Draw Tite Hitch on 2016 Nissan PathfinderWhen we installed the Draw Tite hitch part # 76031 on a 2016 Nissan Pathfinder like yours we found that from the top of the hitch opening down to the ground measured 14 inches. So from the bottom of the hitch it would be more like 11-3/4 inches.
view full answer...
- Does Draw Tite Hitch 76031 Fit 2017 Infiniti QX60 And Interfere with Backup CameraThe Draw Tite hitch part # 76031 is a confirmed fit for your 2017 Infiniti QX60 and is compatible with the backup sensor and camera. If you were towing a trailer or had a bike rack installed in the hitch though that would most likely cause the sensor to go off and would block most of the camera's view.
view full answer... - Trailer Hitch Compatibility Between 2014 and 2018 Nissan PathfinderSome hitches that fit the 2014 Nissan Pathfinder will also fit the 2018 model year, but not all variants. If you refer to the two hitch pages I linked, one for each model year Pathfinder, you will indeed find some hitches that are common fits. For instance, 2-inch Draw-Tite hitch # 76031 will fit the 2014 Pathfinder and also fits the 2018 Pathfinder, both the Platinum and non-Platinum versions. If you plan to move a compatible hitch from one vehicle to the other please note that you will...
view full answer... - Size Hardware Included with Draw-Tite Trailer Hitch Receiver # 76031The Draw-Tite Max-Frame Trailer Hitch Receiver # 76031 referenced in your question includes six M12 x 1.25 x 35mm bolts, along with six 1/2 inch flat washers and six 1/2 inch locking washers. This hitch is confirmed to fit your 2015 Nissan Pathfinder. It fits the 2013 to 2018 Nissan Pathfinder. If you just need replacement hardware for this hitch you can use part # RHK. Once on the product page simply select "Draw-Tite" from the manufacturer drop-down menu and type in the part number (76031)...
view full answer... - Troubleshooting Bolts From Draw-Tite Trailer Hitch Not Fitting Frame Holes on 2014 Infiniti QX60The Draw-Tite Max-Frame Trailer Hitch Receiver # 76031 referenced in your question is confirmed to fit your 2014 Infiniti QX60. I went through the installation steps and found that the 8.8, M12 x 1.25 x 35mm bolts you mentioned are the correct size for your vehicle. The issue you are experiencing with fitting the bolts into the existing holes in your vehicle's frame is actually not too uncommon. Since the frame of the vehicle is constantly exposed to dirt, moisture, and salt, this gunk...
view full answer... - Draw-Tite Hitch for the 2015 Nissan Pathfinder with a Full Size Spare TireI called Draw-Tite to confirm. They stated that there should not be any issue with the Hitch Receiver for a 2015 Nissan Pathfinder, part # 76031, accommodating your full size spare tire. I've linked to a video installation of this hitch for you to reference when installing.
view full answer... - Recommended Trailer Hitch for 2018 Nissan PathfinderFor your 2018 Nissan Pathfinder, I highly recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76031. This Class IV hitch is confirmed to fit your vehicle and will use existing holes in its frame for a no-drill installation. This particular hitch model does not require any fascia trimming at all - the hitch will bolt up to the frame and sit below the bumper without the need for any vehicle modifications. Fascia simply refers to the outside shell of a vehicle's bumper. I have attached...
view full answer... - Locking Hitch Pin Recommendation For 2 Inch Trailer HitchFor a 2 inch trailer hitch receiver, the locking hitch pin I highly recommend the InfiniteRule Hitch Lock for 2" Hitches # 34061071-D. The reason I like the # 34061071-D is due to its stainless steel construction, which not only ensures it is extremely strong, with a 42,000 lb shear strength, also means the lock isn't going to rust and corrode over time. The lock is also made in the USA.
view full answer... - Best Trailer Wiring Harness for Towing Small Trailers with 2016 Infiniti QX60The best trailer wiring harness for your 2016 Infiniti QX60 is the Tekonsha part # 118670 which is very easy to install and has the best price. This gives you a 4-way connector which is the most common trailer connector found on smaller trailers like you mentioned. I also attached an install video for this kit for you to check out as well.
view full answer... - Removing Tie-Down Bracket On 2013 Nissan Pathfinder For Trailer Hitch InstallationI spoke with my contact at Draw-Tite about your 2013 Nissan Pathfinder. They said there have been no reported issues with removing the tie-downs they are aware of. Per the instructions all that is mentioned is that the tie-downs need to be removed from the vehicle. I have attached a link to an installation video you can check out that shows how they remove the tie-down on a Pathfinder. In the video they use an air tool that seems to work quite well. From the video it looks as though...
view full answer... - Replacement Hardware Kit for a Draw-Tite item # 76031 HitchYes, you can purchase just the hardware for the Draw-Tite item # 76031 hitch. You will want the Replacement Hardware Kit item # RHK. You will want to insert 76031 where it says Hitch Item Number and you will receive all of the bolts, lock washers, and washers.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Noah M
Written by:
Alexander C
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jonathan
10/22/2023
Its been a year and still no problems. I use it mostly with our bike rack to bring our four bikes on trips. I never have to worry or even think about it, which is what I want or of a trailer hitch.