bing tracking image
  1. Trailer Hubs and Drums
  2. Dexter Axle
  3. 6 on 5-1/2 Inch
  4. For 5200 lbs Axles
  5. For 6000 lbs Axles
  6. Hub with Integrated Drum
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2

Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2

Item # 8-201-9UC3-EZ
lowest price pledge
Our Price: $221.93
Trailer Hubs and Drums
This item qualifies for Free Shipping
Shipping Weight: 35 lbs
In Stock
Dexter Axle EZ Lube Trailer Hubs and Drums - 8-201-9UC3-EZ
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and nuts included. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 part number 8-201-9UC3-EZ can be ordered online at or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (104)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 8-201-9UC3-EZ

  • 6 on 5-1/2 Inch
  • For 5200 lbs Axles
  • For 6000 lbs Axles
  • Hub with Integrated Drum
  • EZ Lube
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 15123
  • 25580
  • Dexter Axle

Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and nuts included.


  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • E-Z Lube-compatible grease cap makes lubricating bearings fast and easy
    • Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
  • Sturdy iron construction
  • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Hub and drum are made in the USA


  • Application: 5,200-lb and 6,000-lb E-Z Lube trailer axles with #42 spindles
  • Drum dimensions: 12" diameter x 2" wide
  • Bolt pattern: 6 on 5-1/2"
  • Grease cap flange diameter: 2.44"
  • Wheel bolt diameter: 1/2"
  • Weight capacity: 3,000 lbs

Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: 25580 (1.75" inner diameter)
    • Outer bearing: 15123 (1.25" inner diameter)
  • Races (included)
    • Inner race: 25520
    • Outer race: 15245
  • Grease seal (included): GS-2125DL
    • Inner diameter: 2.125"
    • Outer diameter: 3.376"

Exploded View

E-Z Lube-Compatible Assembly for Simple Lubrication

The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.

Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)

Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)

Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"

K08-201-95 Dexter 12" Hub and Drum Assembly for 5.2K and 6K Axles with Hardware - 6 on 5-1/2 - EZ Lube

Replaces 8-201-9UC3-EZ

Customer Reviews

Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 - 8-201-9UC3-EZ

Average Customer Rating:  4.8 out of 5 stars   (104 Customer Reviews)

Install this hub-and-drum assembly on your trailer. For electric or hydraulic brakes. Fits 5,200-lb and 6,000-lb E-Z Lube axles. Inner bearing (25580) and race, outer bearing (15123) and race, grease seal, grease cap, wheel bolts, and nuts included.


What a difference, night and day! Worth every penny. My trailer rides like a dream now, the independent suspension made such a difference, no more bouncing on the roads especially when it gets rough. Customer service was excellent and they answered all my questions and made sure I had all the right equipment I needed. Would definitely do this again if I built another trailer.


Fast Free shipping. Needed to replace all four hubs. Some had bad magnet wear. Two had loose races. Had great assistance selecting measuring original bearings to make sure I got the right parts. Heave shipping boxes. They did a good job stapling smaller boxes to the bigger box which helped boxes stay together.


Would like to thank For The Great Products and service! These Drum Assembly's worked amazing with the electric Brake assembly's I ordered with them. Products came in within 3-4 days! Can't beat that. Thanks ETrailer, got my trailer stopping again and didn't break the bank!


Item: 8-201-9UC3-EZ; This item Is a replacement for my 5th wheel camper. Do to the fact while traveling the outer bearing failed on interstate I-40 late in the evening. The cost of replacing brakes, drum, bearing, seals, grease, plus service cost is Very Expensive after hours. Having these items on hand can save a lot of time and money.
Etrailer parts are top quality and best online price.

Great! I have recommended this item any times. Thanks,
Alan - 12/06/2017


The product was exactly what I was looking for at a fair price and using their price match program even go a better price. Staff was extremely helpful and responsive to my needs. Will definitely purchase again from trailer.

we have several thousand miles on the drums and they are preforming perfectly
DAVID A - 09/25/2021


Steel hubs, scrathed upon delivery.

I will have our Customer Service team reach out to you.
-- Etrailer Expert Jenny N - 04/15/2022


has performed as expected would buy aga in


Comes with everything you need for fresh hub & bearings. Shipped fast! Great fit.


Fast Shipping!! Hub fit exactly as it should.I really had nothing to go by to find this hub.Went to etrailer and started searching questions submitted by others.In a very short while was able to find my axle number and there it was. I would highly recommend and will use for future purchases.

Great, no issues.
Roger - 06/07/2019


Was easy to install. No issues in the first year. Still looked brand new when we repacked


Excellent service from etrailer staff. Super fast delivery. I wasn't expecting the drums to come with the spindle nuts and retainer clips. Pleased to see them in the boxes. They weren't listed with what is included on the site. Parts seem to be of good quality. I wish installing them was as easy as ordering them.

No longer have these. I went to bigger axles. However, they worked great. When I need replacements on new axles, I will be purchasing from etrailer
Robert N - 05/05/2018


Product is great,order was easy and fast delivery,but most of these parts came with the boxes badly damaged,,very poorly boxed,had to spend alot of time just taping the boxes up to be steady enough to be put on my parts shelf for when needed in the future without the parts falling out of the boxes


I am writing this very favorable review of my online shopping experience with etrailer. Recently I had to replace the brakes, hubs, wheels and tires on my travel trailer. Please keep in mind that I am a 65 year old man without a lot of experience with online shopping. Never-the-less, I decided to give it a try in hopes of saving some money. To my surprise, etrailer made the experience very easy and painless. Before I placed my order on line, I had a question about one of the items on my shopping list, so I placed a call to them. I spoke with a very lovely and patient Customer Service Representative by the name of Michelle S. She was very helpful in answering my questions and encouraged me to call her back directly when I was ready to place my order; and so I did. During the shipping process, she kept me informed through emails the status of my order and everything arrived on time and in great shape. I truly appreciate the personalized services I received doing business with etrailer. They truly removed all of the uncertainty and nervousness of shopping online.


received on time as promised. good replacement part but make sure you measure the axle grease seal. they come with 2 1/8 inch seals and my application required 2 1/4 inch. fortunately for me I had the spare seals on hand from previous order.

brakes are working perfectly.
John a - 05/10/2019


I bought the whole package, the brake assembly and hubs. It even came with bearings, rear seal and lug nuts. The shoes are
already on the backing plates. All you need to do is bolt the backing plate to the axle which is five bolts and splice the electric brake wire to your trailer wire. I thought the price was very reasonable and I got free shipping which would have been $126.
Very happy with this company and will do business with them again in the future.


Nice to have good details when puchasing a product over the web. Fit as described. Great personal support when calling in as well. Purchased to convert stock humvee trailer 8 lug to 6 lug. Fit as described and quality was great.

All the product I purchased has been working great.
Robert V - 09/05/2018


The 8-201-9uc-ez trailer hub assy i ordered was great quality and exact fit. The customer service second to none. etrailer is a top notch company and will be my GO TO provider for my trailer needs from now on. Only improvement id like to see is the option to get Timken bearings in the wheel kits as they only provide the chinese junk as do most other companies. Great shopping experience. Thank you Gwendolyn for all your help!


I ordered four Dexter drums and brake kits. Shipping was FAST, my order was placed about 3:45 one afternoon and at 12:15 the next day UPS was unloading it.

The quality of the Dexter parts was what I expected and the reason I paid extra. What I didn't like china made bearings, races and seals, so I spent another $180 with another supplier for U.S.A. made Timken bearings and races.


Ordered 2 of these as well as a pair of the optional 10-36 seals because I didn't know which seal size was needed, and its a good thing I did. Everything went together without any issues, had both hubs replaced and fully greased within an hour. The hubs were a little dinged up in transit but the damage was only cosmetic with only a few paint chips. Im happy with the product and will definitely order from again


Everything was included, shipped extremely fast, and went together without a hitch. I was nervous about ordering something I couldn't put my hands on, and visually compare to my existing hub, but all the measurements Dexter Axle provides are exactly what I needed. I would highly recommend, and this hub to anyone needing a great product at an unbeatable price.


Order arrived very quickly. Placed on Friday, arrived on Tuesday from Mo to Pa. Items were packed well and arrived in good condition. Upon initial inspection all items appear of good quality. Ordered tires, brakes with backing plates, hubs ,seals and grease. Haven't installed any items yet, but I am sure I will have no issues. Free shipping is a plus. Additionally unlike other free shipping offers that are out on the back burner for a week, order was processed and shipped promptly. I have recommended etrailer to friends and would highly recommend them to anyone.


the parts fit perfectly and it is nice to see a brand name on the parts like dexter casted in to the parts the 12000 lb trailer now has brakes


I have been in business for over 30 years and a hobby of mine is I look at different company operations thinking what could be done to improve their service and does it right. From tracking your order, emails and videos on products you just purchased. This allows you all the information you need to install you parts right the first time. Great Job!


This was a great purchase and a fair price. saved me a lot of time putting the brakes back together. I purchased new back plates with the pads and all parts pre-assembled and ready to bolt on the axles. slide on the new drums and bearing and i was done. quick easy and not expensive.

Would highly recommend buying from etrailer.


Great price IMO

Show More Reviews

Ask the Experts about this Dexter Axle Trailer Hubs and Drums

  • Replacing Mobile Home Trailer Hub With a Hub that is Compatible with Standard Rims and Tires
    To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to obtain these measurements. You will need to measure the seal, inner bearing, and outer bearing. It is also possible that there may be bearing numbers stamped on these parts as well, and those would be helpful in obtaining the correct replacement...
    view full answer...
    Image 1 for
  • How to Pick Out Parts for Adding Drum Electric Brakes to a Trailer
    We have the parts you would need to add electric brakes to your trailer, but we do not have them all together in a kit. You should note that most people try to avoid running electric brakes on boat trailer since water and electricity don't mix well generally. We recommend unplugging the trailer connector before backing the trailer into the water. I attached a help article that will walk you through the whole process. But basically you would need to determine first what spindles you have...
    view full answer...
  • When is it Time to Replace a Trailer Hub
    If the armature surface where the brake magnet is damaged, or if the area where the bearings ride is showing wear or is damaged it would be time to replace the hubs. If you had bearings go out in the hub and you continued to drive on them for a while, to the point where the hub is damaged it would be time for the hub to be replaced. To pick out replacement hubs you will need to get the numbers off of the bearings plus the bolt pattern of the hubs. With that info we can pick out the correct...
    view full answer...
    Image 1 for
  • Mobile Home Hub Recommendation with # 42 Spindle Dimensions
    For your spindle dimensions we have a hub and drum that will fit. For that you would want the part # 8-201-9UC3-EZ which comes with bearings that match what you have. This is also a 12 inch by 2 inch drum like you said you need as well.
    view full answer...
  • Will 12x1.5 Mag Seat Lugs Fit Dexter Trailer Hub and Drum Assembly
    I talked to our resident tire expert who has years of experience and the 12 x 1.5 mag seat lugs will not fit the Dexter Trailer Hub and Drum Assembly, Item # 8-201-9UC3-EZ. This hub and drum has a wheel bolt diameter of 1/2 inch so you would need something that fits that size. While we do not carry them, he did recommend looking for 20 x 1/2 mag/shank lugs and trying them. Wish we could help and good luck with the hunt!
    view full answer...
  • Is Hub part # 8-201-9UC3-EZ Made by Dexter
    The Dexter hubs and trailer components we offer like the Dexter hub part # 8-201-9UC3-EZ that you mentioned are the same Dexter products you'd get anywhere else. We sell enough of the Dexter products that we are able to offer them at a very competitive price!
    view full answer...
  • Where Are the Bearings and Races Made that Come with the Dexter Hub and Drum Assemblies?
    The Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb E-Z Lube Axles - 12" - 6 on 5-1/2 # 8-201-9UC3-EZ is made in the USA. I reached out to my contact at Dexter and the Races and Bearings that go into those assemblies are made in China. Because the hub/drum is made and assembled in the USA, they are able to label the assembly as such.
    view full answer...
  • Should Grease be Applied to Bearings Before Install With E-Z Lube System?
    I spoke with a representative of Dexter in regards to this, and they told me that you should still work grease into the bearing prior to installation. I have also attached a link to a video of an installation of E-Z Lube hub assembly # 8-201-9UC3-EZ and starting at about the 9:00 mark you can see the bearings being packed.
    view full answer...
  • Back of Drum to Hub Face Measurement for Dexter Hub and Drum Assembly for 5.2K - 6K Axles
    I went out to the warehouse and found the dimension that you asked about for the Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ was about 4-1/8". I have attached a photo to demonstrate this.
    view full answer...
    Image 1 for
  • Solution for Needing Replacement Hubs for Mobile Home Axle
    I wish we had an easy solution, but for your older trailer with mobile home axles we aren't going to have a hub that will fit on your spindle. Mobile home axles are made for one time use and the parts they use aren't standard. You are going to need to measure your current axles in a few places to get the correct one. You will need to measure from hub face to hub face and then from the spring seat centers. You will also need to know what bolt pattern you have on your current hubs. I attached...
    view full answer...
    Image 1 for
  • Does Dexter Hub/Drum # 8-201-9UC3-EZ have 6k Capacity
    The hub you mentioned part number K08-201-91 is our part # 8-201-9UC3-EZ and is a 6k axle from Dexter. It's actually pretty common though for axles with capacities ranging from 5,200 to 7,000 lb to share same hub setups so I could see pretty easily how there'd be confusion there.
    view full answer...
  • How to Determine Replacement Axle for Boat Trailer
    Unfortunately the only option you have is to replace the entire axle. The reason for this is mobile home axles are designed for a single use, to get the mobile home from point A to point B and is not intended for any other purpose so it very important you replace that axle. From there you can convert to a tire that is as large as you have room for and that fits on your wheel and hub. In order to choose the correct replacement axle you will need to know the dimensions of your current axle's...
    view full answer...
    Image 1 for
  • Replacement Motor Home Axles, Hubs, And Wheels
    I understand that your primary use of this motor home will be on your property. If you had a traditional trailer this would not be an issue, but since you have a motor home we have some limitations to deal with first. Your motor home axle is not a standardized axle size. Due to this, your motor home axle does not have any replacement hubs available. Since motor home axles are not replaceable, by design, manufacturers did not design aftermarket hubs for them. As a result, we do not have...
    view full answer...
    Image 1 for
  • Replacement Hub/Drum for Dexter 8-210
    I do have an option for you but there is not really a complete conversion kit for what you are looking for. The best option would be to just replace the axle. In order to do this I would need to know what your hub face and spring center measurements are as well as the axle capacity. However, if you want to save some money then we may have a new hub/drum for you that uses a standard bolt pattern. In order to confirm if this is an option I would need to know what bearings and seal your hub...
    view full answer...
    Image 1 for Image 2 for Image 3 for
  • Will Trailer Hub and Drum 8-201-5UC3-EZ Fit in Place of K08-201-95
    You can use hub and drum assembly # 8-201-9UC3-EZ in place of K08-201-95. The only difference is the appearances between the 2 are slightly different. Everything else is the same. I have included a link to a video review of this hub and drum assembly for you.
    view full answer...
  • Replacement Trailer Hub/Drum With 8-201 Casting Number On Hub
    The replacement hub/drum you mentioned, part # 8-201-5UC3 is rated for a 5200 lb axle (a de-rated 6000 lb axle). That particular hub/drum is compatible with a 25580 inner and a LM67048 outer wheel bearing. If your axle is indeed rated for 6K and uses a 25580 inner and 15123 outer wheel bearing. If that's the case, you'd need the # 8-201-9UC3-EZ hub/drum. The different outer bearing is what de-rates the hub. The hubs include the races, bearings, grease seals, lug nuts and grease caps compatible...
    view full answer...
  • Difference Between 8-201-9UC3-EZ and 8-201-5UC3 Trailer Hubs
    The biggest difference between the hubs part # 8-201-5UC3 and # 8-201-9UC3-EZ is the grease cap style and the weight capacity. The # 8-201-5UC3 is for non EZ lube spindles basically which means it has a solid grease cap and has a 2,600 lb capacity, and # 8-201-9UC3-EZ instead has a grease cap with a removable center section to allow access to a zerk fitting and has a 3k capacity.
    view full answer...
  • Replacement Hub & Drum Assembly for Dexter 5,200 lb. Axle
    Double check your axle markings regarding the 5,100 lbs. We have the Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles, # 8-201-5UC3. This is a 12" Diameter - 6 on 5-1/2 assembly. This is compatible with electric or hydraulic brakes. The inner bearing (25580) and race, outer bearing (LM67048) and race, grease seal, grease cap, wheel bolts, and lug nuts included. We also have the, # 8-201-9UC3-EZ an E-Z Lube Dexter Trailer Hub and Drum Assembly that is 12" - 6 on 5-1/2. Each option...
    view full answer...
  • How to Determine if Trailer Hub 8-219-9UC3 Would Fit Spindle
    I'd need more info on your axles to know if the hub you mentioned would fit. Is there a sticker or label on it with any info/part numbers? Otherwise you'd have to pull off a hub to get me the dimensions of the spindle or the bearing numbers. The # 8-219-9UC3 uses bearing numbers 25580 and 14125A and has spindle dimensions of 1.25 inch and 1.75 inch.
    view full answer...
    Image 1 for
  • Can a 6,000 Lb Dexter Drum Be Used On a 5,200 Lb Dexter Axle
    The LM67048 (5,200 lb Outer Bearing), 15123 (6,000 lb Outer Bearing), and even 14125A (7,000 lb Outer Bearing) all have the same 1.25" inner diameter so you can use any of them on a 5,200 lb axle. For this, I recommend the Dexter Trailer Hub and Drum Assembly part # 8-201-9UC3-EZ which has a 6 on 5-1/2" bolt pattern. If you want to go up to the 8 on 6-1/2" bolt pattern you would need the Dexter Trailer Hub and Drum Assembly part # 42866UC3-EZ which uses an 14125A outer bearing.
    view full answer...
  • How to Determine if a Trailer Hub with a 6 on 5-1/2 inch Bolt Pattern is a 3.5k or 6k Axle
    Trailer hubs with a 6 on 5-1/2 inch bolt pattern can have an axle weight capacity of between 3,500 and 6,000 lbs. The diameter of the axle will be your next place to look to narrow down the capacity. If it is 2-3/8 inches it's going to be a 3,500 lb capacity or if it's a 3 inch diameter it's going to be a 6,000. For an EZ lube 3,500 with the right bolt pattern you would need part # 84656UC3-EZ, or for a 6,000 lb you would need part # 8-201-9UC3-EZ.
    view full answer...
  • How to Pick Out a Replacement Hub for a AL-KO T60 Axle
    In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. First thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride. If you get back to me with that information I will help you pick...
    view full answer...
    Image 1 for
  • How to Pick Out Brake Shoes and Bearings for a Trailer
    Let's start with bearings. The only two solutions I have for you would be to remove the hubs and get the numbers that are stamped on the bearing or for you to remove the hubs and use a digital or dial caliper to measure where the bearings and seal ride (see pic). With that info I can help you figure out what you need. Instead of just doing brake shoes I would recommend replacing the entire assemblies. Typically brake shoes cost just as much as the assemblies so it's better to get all...
    view full answer...
    Image 1 for Image 2 for
  • Replacement Drive-In Wheel Stud for Hub and Drum Assembly for 5K/6K E-Z Lube Trailer Axles
    For a replacement drive-in wheel stud for hub and drum assembly # 8-201-9UC3-EZ you will need to use stud # 165995. This drive-in stud is 2-1/2 inches long.
    view full answer...

< Previous
123. . .11

Do you have a question about this Trailer Hubs and Drum?

  • Why

    At we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Patrick B
Installed by:
Patrick B
Employee Joshua S
Video Edited:
Joshua S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Product Experts Available Now!
Call 1-800-940-8924