bing tracking image
  1. Trailer Axles
  2. Dexter
  3. 5200 lbs
  4. 86-1/2 Inch Long
  5. 71-1/2 Inch Long
  6. Spindles Only
Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs

Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs

Item # 8327816
Our Price: $241.81
Trailer Axles
Shipping Weight: 45 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Round trailer axle beam measures 86-1/2" from hub face to hub face (when hubs - sold separately - are mounted) and 71-1/2" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately). Great Prices for the best trailer axles from Dexter. Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs part number 8327816 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (636)
  • Q & A (0)
  • Photos

Dexter Trailer Axles - 8327816

  • 5200 lbs
  • 86-1/2 Inch Long
  • 71-1/2 Inch Long
  • Spindles Only
  • No Drop or Lift
  • Leaf Spring Suspension
  • No Hubs
  • Dexter
  • Easy Lube Spindles

Round trailer axle beam measures 86-1/2" from hub face to hub face (when hubs - sold separately - are mounted) and 71-1/2" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).


Features:

  • Round axle beam acts as part of your trailer's suspension system
    • Replace an axle on your trailer
    • Fabricate a suspension to fit your application
  • High-strength steel construction
  • Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
    • Best for straight-line acceleration and steady, controlled towing
  • Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
    • Low ride height makes it easier to load and unload your trailer
  • Straight, E-Z Lube spindles - no drop
    • Built-in grease zerks for simple lubrication
  • Spring seats, brake flanges, and spindles are welded on
  • Made in the USA


Specs:

  • Weight capacity: 5,200 lbs
  • Hub-face-to-hub-face length: 86-1/2"
  • Spring-center-to-spring-center length: 71-1/2"
  • Tubing outer diameter: 3"
  • Bearings (sold separately):
    • Inner bearing: 25580
    • Outer bearing: LM67048
  • Grease seal (sold separately): RG06-070
    • Inner diameter: 2.25"
    • Outer diameter: 3.376"
  • Brake flange configuration: 5 bolt
  • Limited 5-year warranty


Axle Dimensions

Hub Face and Spring Center Measurements on Standard Trailer Axle

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).


The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.


If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.


E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.


Dexters

Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.


Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.



8327816 Dexter Replacement Axle Beam - Easy Lube - 86.5" Hub Face - 71.5" Spring Center - 5,200 lbs





Customer Satisfaction Score:


Customer Reviews

Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs - 8327816

Average Customer Rating:  4.8 out of 5 stars   (636 Customer Reviews)

Round trailer axle beam measures 86-1/2" from hub face to hub face (when hubs - sold separately - are mounted) and 71-1/2" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).

by:

THANKS ETRILER FOR TAKING CARE MY ONLINE ORDER THE DEXTER TRAILER AXLE WAS PERFECT FOR MY NEW INSTALLATION I DONT NEED TO WORRY ABOUT THE EXTRA LOAD ON MY BOAT TRAILER

Etrailer Expert

Brooke M.

1/24/2024

You are welcome! Glad you have some peace of mind now.



by:

Fit perfect. All parts from my old axle transferred without any problems. I welded the new saddles on the axle without any issues.



by:

Worked as planned = a good fit. My application required me to weld new mounts to the opposite side of the axle - my application was over sprung and had a 68.5" mounting measurement.



by:

The axel was received in excellent condition. After measuring twice I welded the spring pads on. It now sits in the rafters of garage. Dexter sent me a complete axel and spring assembly 2 days later that they said they would not. I now have a spare to take with me to Alaska next month.



by:

Great service and product, it seems rare to find such quality customer service. Thank you



by:

Got what i was looking for and got great input from Customer Assistance.
Thanks



by:

This was part of an upgrade. The easy lube feature is worth its weight in gold.



by:

Great price great staff all the way aro und



by:

Well wrapped and no rust to be found on the spindles which is good but its missing a few studs for the backing plates but i dont need them for this applications so it ok



by:

Bought to replace a tube that was bent when I bought it. These are very nice axles, and the amenities of the ezlube setup is awesome. Definitely better than other axles I’ve had in the past



by:

I order axle, u-bolt kit, and tire/wheel combos. Prices are great and products exactly as described. I received the items quickly. Great service.



by:

Great Looking,Heavy Duty.Pre wired For Brakes Side To Side.Will Solve
My Bent Weak Axle Problems,Thanks



by:

I like trailer and have ordered from them a number of times and will order again.



by:

The products ordered came as what was in the description, came 1 day earlier than promised and were packaged well.



by:

Fast delivery and was in stock. Made repairs quickly.



by:



by:



by:



by:

Part was a great fit & delivery was on time and properly packaged.
Definitely recommend & I will use this company if future trailer parts are needed.



by:

I inherited an aluminum trailer that ended up needing a complete overhaul and etrailer was the best resource I could have found. After researching extensively to find out what I needed and watching their videos on how to do it I ended up ordering an EZ-lube axle, galvanized hubs, springs and a hanger kit (in other words everything from the frame down).
Everything shipped quickly and arrived in great shape. All the parts worked perfectly and I couldn't be happier!



by:

Axle arrived in perfect condition, was also an exact fit for my Top Hat Trailer.
Your staff was of great help finding my right axle.
I would recommend etrailer to everyone.



by:

After a rust related axle failure, my equipment trailer was down. (If you roll in the rust belt, check your axles near where the brake wire goes through)
After checking my local source, I was told there was a long lead time for new axles due to the pandemic.
I was so happy to find etrailer. They had the exact axles I needed. After I pulled the axles I realized I also needed hardware and u-bolts.
Everything arrived ahead of schedule, allowing me to get back up and running quickly.
Thank you etrailer. You are a valuable resource.



by:

etrailer had the best prices and excellent customer service, Thanks Ian! Shipping was fast and free to boot. I bent the front axle on my in-laws fifth wheel camper and this axle fit the bill. I had to order a set of spring seats and weld them to the opposite sides. The original seats were at 68.5 " centers and that configuration was unavailable anywhere.



by:

Perfect fit, nice axle and fast delivery. I liked it so much I ordered another a day later to replace the front axle. My 30 yr old tandem trailer's axle broke at the wheel, so I went to a local store which doesn't stock them anymore. Could of ordered a so so axle for $94 + $28 shipping and wait 2 weeks but needed it fast. I went to a major trailer sales & service shop and told "maybe we could get one for $250" with no call back. I decided to check out etrailer and was surprised to see Dexter axles that fit my trailer for $140 with FREE shipping in 3-4 days! Ordered Sat. night, got it Wednesday afternoon, and installed it (with brakes) in an hour. Only problem I had was determining if spindles would fit my hubs. They stated "1/16th spindle" and must be industry talk but french to me. So I had to look up bearing #'s they listed to check bearing sizes to make sure they fit my hubs. A little more time but not a deal breaker. The best part was the huge difference in ride with just one new axle. Always had bouncing loaded or not, but now with just one axle the ride is smoother no load and with my 4000 lb tractor on it. Can't wait to get the 2nd axle on that arrived today. First two pics show the difference between the old straight axle and the new dexter axle. The third is a pic of my 2nd axle, oh well. Etrailer is my new go to place for trailer parts. I have 7 trailers.



by:

The axles were missing studs that fell out during shipping. Also, no nuts were included for mounting the brakes.


25
636
Show More Reviews

See what our Experts say about this Dexter Trailer Axles

  • Replacement Axle For 2020 Grand Design Reflection 312BHTS
    I got in contact with Lippert, and based off the information they gave me the Dexter Trailer Axle Beam with E-Z Lube Spindles # 8327816 is the correct axle replacement.
    view full answer...
  • Could Tire Blow Out Cause Other Axle to Bend Spindle
    Tire blow outs do not tend to bend or damage spindles but things can happen. I would recommend taking the trailer to an alignment shop who can do trailers and see what they think is going on. It could be damaged suspension components too so you might check there as well. To pick out a replacement axle you would need to know a few things but we don't what axle your trailer needs. You'd need to know the axle capacity, the distance from spring seat to spring seat on current axle as well as...
    view full answer...
  • Will Bent Boat Trailer Frame With New Spindle Have Tire Wear?
    Since you replaced the spindle, if the spindle is aligned properly with the axle, then the axle will be straight under the weight capacity of the axle. If you straighten the tongue and the other part of the bent frame is behind the rear most spring hanger, you should be able to drive straight and not impact the tracking or tire wear. If you don't get it straightened out correctly all the way to that rear spring hanger, then you could absolutely have a tire wear issue or tracking issue...
    view full answer...
    Image 1 for
  • Axle Replacement for 87" Hub Face and 70" Spring Center Measurements
    The absolute closest axle we have to your measurements is the Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs # 8327816 (without hubs) or the # 8327816-EB (with hubs). Both of these axles have a hub-face to hub-face measurement of 86-1/2" and a spring center to spring center measurement of 71-1/2 inches. With these measurements, the hubs recede about 1/4" according to your given measurements. I recommend making sure that your setup can accommodate for this slightly...
    view full answer...
  • 86-1/2 Inch Long Trailer Axle Rated for 5,200 lbs
    We do not have a trailer axle beam with those exact specs. The closest we have is the Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 86-1/2" - 5.2K # 8327816-EB which is 86-1/2 inches hub-face to hub-face but 71-1/2 inches spring-center to spring-center. You could have new spring seats welded onto this one with the Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter # TRSS300.
    view full answer...
  • Can I Use A Larger Diameter Axle As A Replacement
    You can install an axle with a larger diameter as long as you have the clearance between the axle and the trailer frame. We usually recommend a bump clearance of 2" between the axle and the frame. You would also need to purchase larger U-bolts for your suspension system.
    view full answer...
  • Do Dexter Hubs 8-201 Fit Dexter Axle 8327816-EB
    Yes, Dexter 8-201 hubs will fit the Dexter Trailer Axle w/ Electric Brakes # 8327816-EB. The 8-201 hubs use inner bearing 25580 and outer bearing 15123, which are the same bearings the spindle on the # 8327816-EB accepts, which is why that hub fits.
    view full answer...
  • Part Number For 6,000 lb Axle
    The part number for a 6,000 lb Dexter axle is the Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 6,000 lbs # 8327826.
    view full answer...
  • Replacement Axle for a 2018 Grand Design Reflection 303RLS
    The Dexter Trailer Axle Beam with E-Z Lube Spindles part # 8327816-EB will work on your 2018 Grand Design Reflection 303RLS and it comes with a drum that has a 6 on 5-1/2" bolt pattern. All you will need to do is simply move the spring seats inward to match your 68-1/2" center to center spacing. This is a pretty common task so you won't have much issue at all doing so. All you need to do is place a few tack welds on the spring seat to hold them in place. Unfortunately, we do not have the...
    view full answer...
  • Axle Thickness of Dexter 5,200 lbs and 6,000 lbs Axles
    The 6,000 lbs Dexter Axle item # 8327826 has a thickness of .16" The 5,200 lbs Dexter Axle item # 8327816 has a thickness of .18" The thickness of the axle won't affect you needing an alignment, unless you're bending the axles by overloading the trailer. You will want to focus more on your suspension components if you are having issues with alignment.
    view full answer...
  • Options For Replacing a 4,400 lb Axle
    I may have an option for you, but unfortunately we do not carry any axles with a 4,400 lb capacity. We could potentially replace your axle with a 5,200 lb axle like the Dexter # 8327816 which is 86-1/2" long from, hub face to hub face. We would need to confirm the hub face length and spring seat length of your axle in order to recommend a suitable replacement. I have included a diagram showing the axle measurements below if you want to take a look.
    view full answer...
    Image 1 for
  • How to Correctly Measure for a Replacement Trailer Axle
    Excellent question. There are two important measurements, the hub face to hub face dimension and the spring center to spring center dimension. I've provided a diagram that will show exactly what needs to be measured. I've linked to our selection of trailer axles and to an article that you might find helpful.
    view full answer...
    Image 1 for
  • Replacement Axles for 2017 Grand Design Reflection 29RS
    What you're looking for is an 86-1/2" long replacement axle. Since you will need new hubs and drums, along with brakes, I recommend getting the # 8327816-EB. This has a 71-1/2" spring center length so you will also need to cut off the spring seats and weld on # TRSS300 to match the current 68-1/2" measurement. Grand Design does a great job listing their parts, but unfortunately they don't include the leaf spring information. You will need to measure your current leaf springs to find the...
    view full answer...
  • Availability of Trailer Axles With 72 Inch Spring Centers
    The two relevant dimensions when replacing a trailer axle is the hub face to hub face of the existing axle and the center to center spring seat dimension. Are you sure about that spring seat center to center distance? The closest axles we offer are a 5200 or a 6000 lb axle with a 71-1/2 spring seat center to center dimension. All have a hub face to hub face dimension of 86-1/2 inches. I've provided a diagram showing these dimensions. We have a total of 4 axles available with these dimensions....
    view full answer...
    Image 1 for
  • Replacing Lippert 5,200 lb Axle with Dexter 5,200 lb Axle 86.5 Inches Hub Face to Hub Face
    The Lippert 5,200 lb axle you have has a hub face to hub face of 86.5 inches which is identical to the Dexter # 8327816 you referenced, however the 68.5 inch spring seats of your Lippert axle are not identical to the 71.5 inch spring centers of the Dexter axle. They do use the same spindles so the bearings and grease seal will all match. You would simply need to weld spring seats onto the axle at the 68.5 inch on center locations using # TRSS300.
    view full answer...
  • Replacement For 86-1/2 Inch Long 5,200 lb Axle
    Appreciate the photo, and what that shows is you have a 5,200 lb axle that is 86-1/2 inches hub face to hub face with a spring center to spring center measurement of 68-1/2 inches. We do have a replacement with that capacity and the correct length, but you'll have to have new spring seats welded on as we don't have one with the spring center measurement. So what you'll need is the following: - Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs # 8327816 - Spring...
    view full answer...
    Image 1 for
  • Do You Have to Get New Hubs/Drums and Brakes When Upgrading from a 3,500 to 5,200 Lb Axle
    In order to upgrade from a 3,500 lb to a 5,200 lb axle you'll need to obtain new hubs/drums and braking assemblies as the bearings and brake mounting flanges are different. In order to choose the correct replacement axle for a trailer you'll need to measure the hub face (center of hub face to center of hub face) and spring center (center of spring center to center of spring center). This will then give you the info needed to pick out the correct replacement axle for your trailer. I have...
    view full answer...
  • Availability of Dexter Axle # 8327816 with Spring Seats Welded On Other Side
    We don't offer them with the perches mounted on the other side but if you wanted to you could have a set of welded to the opposite side with # TRSS300 pretty easily.
    view full answer...
  • Replacement 5200 lb Axle
    We have a Dexter Trailer Axle w/ Electric Brakes # 8327816-EB that measures 86-1/2" from hub face to hub face. The catch is that this axle has 71-1/2" spring centers. It will also have a 6 on 5 1/2" bolt pattern. The spring centers do not match up so this may not work for your application. In this case you might have to special order the axle you need.
    view full answer...
  • Does Grand Design Reflection RV has Grease Fittings to Add Grease to Hub
    If you go out and look at the wheels of your trailer on the center cap there will be a black rubber plug that you can remove which will reveal a grease fitting. You can use that fitting to add grease to your hubs. The LMX red grease like the part # L11390 is the best option that provides the highest quality waterproof grease.
    view full answer...
  • Replacement Axle for Load Rite Boat Trailer with 82" Length and 5200-lbs Capacity
    I may have a solution for you, but it doesn't look like there is a stock axle that meets those specs; the closest thing I'm seeing in Dexter's stock axles has a 71-1/2" spring center measurement and 86" hub to hub. If you think it's possible your measurement is off 1/2" and don't mind having a little wider base on the trailer then you could use something like the # 8327816-EB. This is a complete axle system with hubs and brakes included and the EZ lube spindles make it easy to perform maintenance....
    view full answer...
  • Replacement for Lippert 5200-lb Axle on 2006 Holiday Rambler 5th Wheel
    Thank you for the information on your Lippert axle. My contact at Lippert advised that they need more information to identify your axle. The number 123322 does not correspond to their serial numbers and might be a general part number. What you want to find is a number starting with '045' or '019', or 'V000' plus more digits, or 'NV' plus six more digits. The Dexter 5200-lb trailer axles we offer have a hub face dimension of 86-1/2-inches like your Lippert axle, but the spring center spacing...
    view full answer...
  • Seal Size Recommendation for Dexter Axle # 8327816
    The Dexter Trailer Axle Beam # 8327816 that you referenced takes the larger diameter 2.25 inch inner diameter grease seal part # RG06-070.
    view full answer...
  • How to find the correct replacement trailer axle for overslung setup
    The Dexter Trailer Axle Beam with E-Z Lube Spindles - 86-1/2" Long - 5,200 lbs # 8327816 is the closest option available. The hub face to hub face measurement is only 1-1/2" more than your current setup, which won't cause any issues. The main thing to look at and match up EXACTLY is the spring seat to spring seat spacing. Since you need 68-1/2" spacing, and this axle provides 71-1/2" spacing, you will need to cut the spring seats off and move them to the appropriate spot for your trailer...
    view full answer...

Do you have a question about this Trailer Axle?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee Lindsey S
Edited by:
Lindsey S
Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Mike S
Updated by:
Mike S
Employee Alexander C
Written by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924