bing tracking image
  1. Trailer Hubs and Drums
  2. Dexter Axle
  3. 6 on 5-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub with Integrated Drum
  6. Standard
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2

Item # 84656UC3
lowest price pledge
Our Price: $127.45
Trailer Hubs and Drums
This item qualifies for Free Shipping
Shipping Weight: 23 lbs
Quantity: 
In Stock
Dexter Axle Trailer Hubs and Drums - 84656UC3
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. For electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included. Lowest Prices for the best trailer hubs and drums from Dexter Axle. Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 part number 84656UC3 can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (37)
  • Q & A (0)
  • Photos
  • Why etrailer?

Dexter Axle Trailer Hubs and Drums - 84656UC3

  • 6 on 5-1/2 Inch
  • For 3500 lbs Axles
  • Hub with Integrated Drum
  • Standard
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 1/2 Inch Stud
  • L44649
  • L68149
  • Dexter Axle

This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. For electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Sturdy iron construction
  • Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
  • Hub and drum are made in the USA


Specs:

  • Application: 3,500-lb trailer axles with #84 spindles
  • Drum dimensions: 10" diameter x 2-1/4" wide
    • Works with 10" brake assembly
  • Wheel size: 14" to 16-1/2"
  • Bolt pattern: 6 on 5-1/2"
  • Wheel stud diameter: 1/2"
  • Grease cap flange diameter: 1.986"
  • Weight capacity: 1,750 lbs


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 10-19
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


K08-250-90 Dexter 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 6 on 5-1/2

Replaces 84656UC3






Customer Reviews

Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - 84656UC3

Average Customer Rating:  4.8 out of 5 stars   (37 Customer Reviews)

This hub-and-drum assembly fits 3,500-lb axles with #84 spindles. For electric or hydraulic brakes. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.

by:

This Drum is Heavy as it should be, but the packaging is terrible. Place the Bearings, Lug Nuts, and Seal all in a light weight bag and expect no Damage? The seal was bent and the bearings have metal shavings / Dust from the Lug Nuts! Of course they can be cleaned, but that is just more work. I have never seen Bearings not individually packaged to keep them clean, and I have been doing bearings for over 50 years. You get what you pay for. Buy elsewhere!




by:

I had a very pleasant experience dealing with etrailer. Their customer service department was exceptionally responsive to ensure that I got my parts on time. Five stars isn't enough




by:

As always, great product from a company that built their reputation by getting it done the right way. I highly recommend this company and the products they sell.




by:

Outer races were installed making the rest of the installation easy. Shipping was fast and on time. Packaging was solid. Great deal for all that was included (drum, bearings, lugs, seal, dust cover). Don't forget you'll need a new cotter pin since that is not included. Only problem I had was that I lost a lug nut.




by:

The hub worked perfectly and we have had no trouble with it. Was very happy with the service


Comments
The hub and bearing are working great
Jim G - 05/09/2022


by:

Thank you for your expeditious shipment! Arrived quicker than noted. I always try to get OEM replacement parts rather than after market, saves a lot of headaches lol. Will definitely use this company for further trailer parts. Thanks again.


Comments
Havent had any issues, working just as expected. Great replacement, have another trailer needing this upgrade.
Richard - 06/24/2021


by:

I installed these hubs as part of an upgrade and rebuild of a 20 year old trailer and so far they are working great! I wanted to convert my trailer to 6-bolt wheels to make them standard with my other two trailers and the conversion worked flawlessly!




by:

When I called last year I got a young women on the phone who was very helpful. She explained to me how to check my trailers axle to make sure I purchased the correct parts. When I received the parts everything was perfect. They fit and have been working great for the last year and don't see anything changing. I have made numerous purchases from etrailer and don't see that ever changing. Thanks for the help.




by:

Very happy with product and price. Shipping time was just what I expected. When using the online catalog I was able to pin down the parts that I needed. The one thing that would have been better was that the backing plate bolts didn't come with nuts (7/16 fine). The size is not that common so a trip to the store was required. Overall, very satisfied.




by:

Drums, Bearings, & Brakes arrived promptly within a few days of ordering. I chose the Dexter brand parts for 2 reasons. One because I have owned as well as installed Dexter parts in the past and I am familiar with the quality and craftsmanship. Also, and foremost "Made in the USA". Kinda makes you wonder. Do the Chinese look for the "Made in China" label?
Thank you,
God Bless America!
I'll be back,
PJF




by:

Nice Product, fit my 1975 Airstream camper perfect! Very pleased with the quality. Arrived in timely manner and well packaged. I will purchase from etrailer again.




by:

Great service before the sale. Karen answered all my questions and helped confirm the hubs would work for my conversion. Fast shipping. Hubs worked as planned...couldn't ask for more. Thanks Karen!




by:

Hubs were in excellent condition. All machined surfaces looks like they just came off of the lathe. Painted surfaces looked to be well done also. Bearings came in a separately packed box inside one of the larger boxes to protect them and they were individually packaged in zip lock bags to keep out moisture.
Shipping only took three (3) days---that's amazing.




by:

The parts arrived quickly and safely. Etrailer answered all my questions when I called and when I wrote by email. The parts are very high quality as well.




by:

Exactly what I wanted. Super fast shipping. I will buy from etrailer.com for all my future needs. Keep up the great work!




by:

Everything was PERFECT !!! Order was a day early,Chris W. was the most helpful person I have ever dealt with for on line products. I highly recomend E Trailer. and Chris THANX SO MUCH !!!!!





by:

Perfect fit for my RV. Only took 30 min to pack wheel bearings with grease and install it.




by:

Hub and breaks were delivered quickly and price was great. The items were what I expected and installation was simple. Would highly recommend this company.




by:

Product arrived on time with excellent tracking information and the parts were high quality parts from Dexter Axle that fit like a glove.




by:

Working well a year later - not like the original (new with trailer - China unlabeled)




by:

Great fit and quality... no problems at all a year later.




by:

Quick shipping, easy to deal with. Correct parts. Thanks




by:

great service as usual!




by:

Kathy went far beyond what she had to do, in order to get my company trailers back on the road. She got us the Dexter hub assemblies shipped out promptly and at a great price. We still had to find an axle, bc they were out of stock.. But Kathy directed us to a few other competitors. One of which helped us out with that. Thank you very much.

Weve had nothing but trouble with chinese parts failing, constantly. Never had a problem with Dexter parts tho. BUY DEXTER brand. Or buy 2 or 3 chinese parts as backup. Your choice.




by:

Great drum and good deal



25
37
Show More Reviews

See what our Experts say about this Dexter Axle Trailer Hubs and Drums



  • Do the Races Come Fully Seated in the Trailer Hub and Drum Assembly # 84656uc3
    I went out to the warehouse and checked our stock of hub and drum # 84656uc3. All of the units are just as you have described and the races are installed correctly. If you are looking at the inner race from the back side of the hub and drum, there will be a small space of smooth metal towards the center of the hub and then a rough patch right in the middle. Take a look at the pictures I have included.
    view full answer...
    Image 1 for Image 2 for
  • Re-Surfacing Specification for Hub/Drum Assembly on 3500-lb Axle
    First, thank you for your recent order from etrailer. Most hub/drum assemblies, including the Dexter # 84656UC3 that you purchased, will indicate their maximum re-bore dimension right on the hub outer surface. Please refer to the photo I have linked for you.
    view full answer...
    Image 1 for
  • Can the Armature Surface of an Electric Drum Brake Hub Be Turned Like the Brake Surface
    The part of a hub/drum assembly that makes contact with the electromagnet, the armature surface, cannot be machined. If the surface is deteriorated you'd do well to replace that hub. The link provided will show you all hub/drum assemblies which you can sort using the filters on the page. Be sure to match your bearing set, bolt pattern and axle weight capacity when choosing a new hub. You might also refer to the linked article on re-packing bearings.
    view full answer...
  • Is a Double Lip Seal Included with Trailer Hub and Drum Assembly - 3,500-lb Axles - 6 on 5-1/2
    Hub and drum assembly # 84656UC3 comes with the correct seal so you do not have to order one. The included seal is a double-lip seal.
    view full answer...
  • Hub and Drum Assembly for 3,500 Pound Axle with 6 on 5-1/2 Bolt Pattern Hub Group 8-250
    The 8-250 hub and drum assemblies are unique in that they feature that 6 on 5-1/2 bolt pattern normally seen on higher capacity hubs. For a replacement you can use # 84656UC3. The bearings, races, and seal are included. You will also get a grease cap and new lug nuts with it. If your trailer has EZ lube axles with the grease fittings at the ends then you would need # 84656UC3-EZ instead. I have linked a couple of videos on these assemblies for you to check out.
    view full answer...
  • What is Hub Bore Diameter of Dexter Hubs # 84556UC3 and # 84656UC3
    The outer diameter of the center bore of the Dexter Trailer Hub and Drum Assembly, # 84556UC3 and # 84656UC3 is 2.67 inches. Most wheels that would be used with this hub would have a pilot diameter of 3.19 inches.
    view full answer...
  • How To Find Replacement Bearings, Races, And Seals For Lippert Axle
    I did some research and was unable to find the component listing for the hub assembly you referenced. The best way to find out what the components are would be to remove them and locate the numbers on the bearing and seal and race. I have attached a photo that indicates where the part number is normally found. If you cannot find the numbers on the parts, the only real way to find the correct components is to use a digital or dial caliper and measure the spindle you have on your axle....
    view full answer...
    Image 1 for
  • 6 on 5-1/2 inch Bolt Pattern Trailer Hub Recommendation for a Lippert 3,500 Axle
    For a 10 inch hub drum with a 6 on 5-1/2 inch bolt pattern that will fit your Lippert 3,500 lb axles the Dexter part # 84656UC3-EZ will be what you would need. I also attached a link to a page that has all of the 16 inch trailer wheels and tires we offer that have a 6 on 5-1/2 inch bolt pattern.
    view full answer...
  • Will the Dexter Trailer Hub # 84656UC3-EZ Work with My 3,500 Pound Lippert Axle?
    Yes, if you are looking for a 6 on 5-1/2 bolt pattern, the # 84656UC3-EZ will work with your Lippert 3,500 pound axle.
    view full answer...
  • Trailer Hub for 3,500 lb Axle for 6 Lug Bolt Pattern
    Yes, since the axle you have now is a 3,500 lb axle the hub/drum part # 84656UC3-EZ that you referenced would fit in place of what you have now and would give you the 6 on 5-1/2 inch bolt pattern you are looking for.
    view full answer...
  • Replacement Trailer Wheel Hubs for 2005 Tahoe Boat Trailer
    I'm going to provide you with the most common setup but it will require you to confirm your measurements on your trailer. You can use the article linked below as well as the picture below to see the measurement points that will need to be confirmed. The Dexter Trailer Hub and Drum Assembly # 84656UC3 is for a 3500lb axle with 6 on 5-1/2" bolt pattern. -Inner bearing: L68149 (1.378" inner diameter) -Outer bearing: L44649 (1.063" inner diameter) -Grease seal Inner diameter: 1.719" If you...
    view full answer...
    Image 1 for
  • Dexter 3,500 lb Nev-R-Adjust Electric Brake Assembly and Compatible Hub Drums
    The Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469 do not come with the hub and drum assemblies. They need to be purchased separately. For compatible assemblies, I recommend the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ or if you don't have the spindles with the integrated grease zerk # 84546UC3. If you have the 6 on 5-1/2 inch bolt pattern then you will use #...
    view full answer...
  • How to Find Correct Trailer Hub
    I can tell you how to determine the correct replacement hub, but we would not have any way of identifying a replacement hub from a photo. So there are a number of things you'll need to know; first, you need to know the weight rating of your axle, and also what bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable...
    view full answer...
    Image 1 for
  • Replacement Trailer Hubs For #10 Dexter Torflex Axle With 6 on 5-1/2" Wheel Bolt Pattern
    Yes, the Dexter Trailer Hub and Drum Assembly # 84656UC3-EZ is the correct size for your Dexter #10 Torflex 3,000lb axle. It only differs in having the 6 on 5-1/2" bolt patter compared to the 5 on 4-1/2" Hub # 84546UC3-EZ that came on your axle.
    view full answer...
  • How to Choose 6-on-5-1/2 Hub/Drum Assemblies and Brakes for an Axle
    Replacement hubs are selected based on the bearing set used in the originals. The linked picture shows you the typical location and appearance of bearing, race and seal part numbers, but if you cannot find those you can measure the spindles with a precision caliper to the nearest thousandth of an inch (1.123). The locations to measure are shown also. I included a link to our main page for all 6-on-5-1/2 bolt pattern hub/drum assemblies. These come with the appropriate bearings, races,...
    view full answer...
    Image 1 for
  • Solution for Replacing 14 inch Trailer Wheels with 15 inch for Higher Weight Capacity
    Probably your simplest solution would be to replace your hub/drums on your Dexter 3,500 axle with ones that have a 6 on 5-1/2 inch bolt pattern like the part # 84656UC3-EZ which you'll have a much easier time finding higher capacity wheel and tire options for like with the # LHAW124 which has a tire size of ST225/75R15 and a weight capacity of 2,830-lb max load at 80 psi and comes with 1 year roadside warranty.
    view full answer...
  • Hub and Drum Recommendation for a 3,500 Dexter Axle
    First off thank you for all of the information you listed, that makes picking out a replacement hub much easier. Most likely you have the number 84 spindle as the dimensions you gave are pretty close to what that spindle has. You will need to double check your measurements though for the inner bearing as that should be 1.38 inches and not 1.475. If that all checks out the correct hub and drum you would need is the part # 84656UC3-EZ. It has the bolt pattern you need, the capacity you...
    view full answer...
  • How to Determine if a Trailer Hub with a 6 on 5-1/2 inch Bolt Pattern is a 3.5k or 6k Axle
    Trailer hubs with a 6 on 5-1/2 inch bolt pattern can have an axle weight capacity of between 3,500 and 6,000 lbs. The diameter of the axle will be your next place to look to narrow down the capacity. If it is 2-3/8 inches it's going to be a 3,500 lb capacity or if it's a 3 inch diameter it's going to be a 6,000. For an EZ lube 3,500 with the right bolt pattern you would need part # 84656UC3-EZ, or for a 6,000 lb you would need part # 8-201-9UC3-EZ.
    view full answer...
  • How To Find a Replacement Hub/Drum for a Lippert Axle
    In order to find the correct hub/drum for your trailer I would need to know either the serial number on the axle or the axle capacity which are both found on a white label in the center of the axle. The "LC170-T" that you provided is not a valid serial number. The serial number will start with either a "V" or "NV". I have attached a list of hub/drums with 6 on 5-1/2" bolt pattern for you which all you would need is your axle capacity to confirm. Trailer Hub and Drum Assembly for 3,500-lb...
    view full answer...
  • Is 84656UC3-EZ 10 Inch Hub Drum a Direct Replacement for Dexter 8-247
    You are correct. The # 84656UC3-EZ hub/drum you'd looked at with the 6 on 5-1/2 inch bolt pattern uses the same L44649 outer/L68149 outer wheel bearings and 10-19 grease seal as the 8-247 hub/drum like the # 8-247-50UC3-EZ you'd looked at. Since the inner and outer bearings and ID of the grease seal match up, the # 84656UC3-EZ would be a compatible replacement.
    view full answer...
  • 6 on 5-1/2 inch Bolt Pattern Hub Drum Recommendation for a Timbren Axleless Setup
    I believe I have a solution for you, but there are not hubs available that have a 6 on 4-1/2 inch bolt pattern. I believe you may have meant to type 6 on 5-1/2 inch. Which I can help if so. For a Timbren System part # ASR3500S05 would work well and then for a 6 on 5-1/2 inch hub to install on the spindle you would want part # 84656UC3.
    view full answer...
  • Hub/Drum Assembly Recommendation with a 6 on 5-1/2 inch Bolt Pattern for a Timbren Axle-Less System
    Yes we do, you would want the Trailer Hub and Drum Assembly # 84656uc3. This hub and drum has a 6 on 5-1/2 inch bolt pattern and uses the exact same bearings that the Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR2KHDS03 is compatible with so it should work perfectly for you. The # ASR2KHDS03 lists its spindle/hub compatibility as being designed for L68149 inner bearings and L44649 outer bearings, which is exactly what the # 84656uc3 comes with.
    view full answer...
  • Availability of Hubs with 6 on 5-1/2 Inch Bolt Pattern for 3500-lb Axle
    I think you are referring to a hub or hub/drum assembly that has a 6 on 5-1/2-inch wheel bolt pattern and that has the correct capacity for a 3500-lb axle. Yes, such items exist and we can offer you a choice of four different hubs with this bolt pattern and weight capacity. The link provided for you will show you our page for the items that meet these criteria. Please note that all of these hub assemblies are compatible with the same bearing set - and this is essential for proper fit on...
    view full answer...
  • Hub/Drum Recommendation for 1967 Oasis Trailer Getting Dexter 3,500 lb Hub/Drums
    Thanks for getting me all of the info listed. I can tell you really did your homework on this. But to answer your question there isn't a modern style of bearing that's going to allow you to reuse the hub/drums you have now since the bearings and dimensions do not match anything we offer now. So since you are going to a Dexter 3,500 lb axle and you have a bolt pattern of 6 on 5-1/2 inch the hub/drums you'd need are the # 84656UC3-EZ and you'd be set. This comes with the correct bearings...
    view full answer...


< Previous
123. . .4



Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee DeAnne T
Updated by:
DeAnne T
Employee Adele M
Updated by:
Adele M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Hannah L
Updated by:
Hannah L
Employee Patrick B
Installed by:
Patrick B
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Chris R
Video Edited:
Chris R

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-496-5010