bing tracking image
  1. Trailer Hubs and Drums
  2. TruRyde
  3. 4 on 5 Inch
  4. For 3000 lbs Axles
  5. Hub
  6. Agricultural
Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Item # AH15450ECOMP
Retail:$86.41
Our Price: $81.68
You Save: 5%
Trailer Hubs and Drums
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
Hub is designed for use on idler axles with agricultural applications. Fits 3,000-lb axles. Inner bearing (LM67048) and race, outer bearing (LM11949) and race, grease seal, grease cap, and wheel bolts are included. Great Prices for the best trailer hubs and drums from TruRyde. Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural part number AH15450ECOMP can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (8)
  • Q & A (0)
  • Photos

TruRyde Trailer Hubs and Drums - AH15450ECOMP

  • 4 on 5 Inch
  • For 3000 lbs Axles
  • Hub
  • Agricultural
  • LM11949
  • LM67048
  • 1/2 Inch Stud
  • TruRyde

Hub is designed for use on idler axles with agricultural applications. Fits 3,000-lb axles. Inner bearing (LM67048) and race, outer bearing (LM11949) and race, grease seal, grease cap, and wheel bolts are included.


Features:

  • Trailer hub assembly fits idler axles
    • Hub is for agricultural applications
  • Grease seal, grease cap, (4) 1/2"-20 wheel bolts, and bearings are included - races installed on hub


Specs:

  • Application: 3,000-lb trailer axles with agricultural applications
  • Weight capacity: 1,500 lbs
  • Hub diameter: 6-1/2"
  • Bolt pattern: 4 on 5"
  • Pilot hole diameter: 3.62"
  • Use with spindle # AS1500E


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: LM67048 (1.250" inner diameter)
    • Outer bearing: LM11949 (0.750" inner diameter)
  • Races (included)
    • Inner race: LM67010
    • Outer race: LM11910
  • Grease seal (included):
    • Inner diameter: 1.50"
    • Outer diameter: 2.332"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


AG-H6334500-1ZHA Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural

Replaces AH15450ECOMP





Customer Satisfaction Score:


Customer Reviews

Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural - AH15450ECOMP

Average Customer Rating:  4.8 out of 5 stars   (8 Customer Reviews)

Hub is designed for use on idler axles with agricultural applications. Fits 3,000-lb axles. Inner bearing (LM67048) and race, outer bearing (LM11949) and race, grease seal, grease cap, and wheel bolts are included.

by:

Review the Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural - AH15450ECOMP and axel stub worked as advertised and could not expect more. would purchase again.



by:

We are very satisfied with the parts we ordered. They arrived in a timely manner. You were the only ones we could find who carried this. Mahalo for that! Very satisfied customers!

Jessica

10/20/2020

Your product is still working beautifully! We are still very satisfied.



by:

Product came as promised. etrailer was very helpful on phone when I call them. Very satisfied with shipment. Came a day earlier than I expected. Thanks Steve for your service



by:

Great place to get trailer parts from.



by:

I can't believe how fast I got it.It save my plow days no delay at all!!!



by:

Fast shipping and product was just as described



by:



by:

Just what I needed


8
8

See what our Experts say about this TruRyde Trailer Hubs and Drums

  • Overall Height of Agricultural Trailer Hub AH15450ECOMP
    Sounds like you are asking for basically the overall height of the trailer hub part # AH15450ECOMP which is 4 inches like you can see in the attached diagram.
    view full answer...
    Image 1 for
  • Replacement Hubs for Oddball Axle or Axle Replacement for Boat Trailer
    The Trailer Hub Assembly - 3,000 lbs Axles - 4 on 5 - Agricultural # AH15450ECOMP is the only fit we have for those bearings. It has an odd bolt pattern of 4 on 5 inch. This likely isn't what you are seeking for your boat trailer. If you can give me some more information on your trailer I can help with a replacement. For a standard trailer axle, I need to know your spring seat to spring seat measurement, bolt pattern of your hubs, and measurement from hub face to hub face. If your measurements...
    view full answer...
    Image 1 for
  • Replacement Trailer Hub for Flat Bed Trailer with 1.25 Inner and 0.75 Outer Bearings
    It sounds like your trailer uses agricultural hubs # AH15450ECOMP. This hub has the same 1.25 and 0.75 inner and outer bearings which are parts # LM67048 and # LM11949. Make sure your seals have an outer diameter of 2.332 inches and inner diameter of 1.50 inches. If this matches then part # AH15450ECOMP is the hub you need.
    view full answer...
  • Replacement for Hub With LM67048 and LM11949 Bearings
    We have one hub that matches your bearing combination. The # AH15450ECOMP uses a # LM67048 inner and # LM11949 outer bearing. This hub is intended for 3,000-lb trailer axles with agricultural applications. The bolt pattern is also 4 on 5 so you will need to double check to see if that matches your current hub. If it is a 4 on 4 we don't have anything that matches.
    view full answer...
  • Replacement Hub for 1986 Shorelander Boat Trailer
    Based on the measurements you provided you have # LM67048 inner bearings and # LM11949 outer bearings. There is only one hub that would fit with a 5 on 4-1/2 inch bolt pattern, which is the # AH15450ECOMP Trailer Hub Assembly. This is designed for agricultural use and speeds less than 20 mph so I would not recommend using it as a replacement for the hub on your boat trailer.
    view full answer...
  • Replacement 5 on 4 3/4 Hub With LM67048 Inner Bearing and LM11949 Outer Bearing
    With your hub having an inner bearing # LM67048 and outer bearing # LM11949, it sounds like you have an agricultural style hub, like the Redline Trailer Hub Assembly # AH15450ECOMP. However, this will have a 4 on 5 bolt pattern and this will be the only bolt pattern this hub is offered in, unfortunately. With that being said, the best option we can recommend will be to replace your axle with something that uses more common parts. Though you will need to measure a few things, picture included,...
    view full answer...
    Image 1 for
  • Can the Agricultural Style 4 on 5 Inch Hubs Be Replaced with a More Common Bolt Pattern
    It is possible to replace just the trailer hub instead of the whole axle but I would need to know what bearings your current hub has in order to see if that is possible. For example, the only trailer hub we offer with a 4 on 5" bolt pattern is the Trailer Hub Assembly part # AH15450ECOMP and this uses an LM67048 inner and LM11949 outer bearing therefore can be replaced with the Trailer Hub Assembly part # DX22XR because this also uses those same bearings. The Grease Seal SL150 part # SL150...
    view full answer...
    Image 1 for
  • Replacement Axle Recommendation for a Snowmobile Trailer with Non Standard Hubs
    I wish I had a hub that would work on the spindles you have on your trailer. But none of the hubs we carry work with your bearing combination. That outer bearing you have is the problem. It's usually only used on agricultural hubs like part # AH15450ECOMP. Honestly your best option would be to replace the axle. I attached a page that has all of our axles we carry that come with hubs that have 4 on 4 inch bolt patterns. You will need to know the distance between the hub faces on your axle...
    view full answer...
  • Replacement Hubs For Trailer With 3/4 Inch Outer Diameter Spindle That Is Straight
    The only hub we have that is currently available for a 3/4 inch spindle is Item # AH15450ECOMP. This is an agricultural hub that fits 3,000 lbs axles for 4 on 5 inch bolt pattern. It takes an inner bearing, Item # LM67048, and outer bearing, Item # LM11949. It is meant to be used for low speed (less than 20 mph) agricultural applications. It is designed for a spindle like Item # TRU54FR. If you can find the actual bearing number on your old bearings and seal or can send me a bearing...
    view full answer...
    Image 1 for
  • Replacement Grease Seal For a Trailer Hub Using LM11949 Outer Bearing and LM67048 Inner Bearing
    If you can send me the diameter of the spindle where the grease seal sits and the diameter of the hub where the seal is pressed onto I can verify if we have the correct seal. Currently I do see we carry 2 hubs which use the Inner Bearing # LM67048 and Outer Bearing # LM11949. First is the Dexter Trailer Idler Hub Assembly for 2,500-lb Axles # DX22XR which uses the Seal # 168233. This seal has an inner diameter of 1.688" and outer diameter of 2.332". The other hub is an Agricultural Hub...
    view full answer...
  • Trailer Hub Seal Recommendation for Hub with Race LM11910
    The race number you mentioned isn't a very commonly seen race but it is used on an agricultural hub like the part # AH15450ECOMP which does use the seal you referenced of # SL150.
    view full answer...
  • Information on Bearing Number LM11949
    This Bearing, part # LM11949, is most commonly used with the Agricultural Hub Assembly, 4 Bolt, 5 inch Circle, part # AH15450ECOMP. If you are attempting to replace existing bearings, you will just need to check your current bearings for the part number LM11949 to ensure you are ordering the correct replacement bearings.
    view full answer...
  • Dimensions of AH15450ECOMP Agricultural Trailer Hub Assembly
    The hub face of the # AH15450ECOMP Agricultural Hub is 6-1/4 inches in diameter, and the overall depth is 4 inches. The hub has an inner hub bore diameter of 2.328 inches with an outer bore diameter of 1.781 inches. I've shown these dimensions in the provided photo. The hub has a 1500 lb each/3000 lb per axle, and is designed for low speed applications. The bolt pattern is 4 on 5 (4 lugs on 5 inches, center to center). The hub includes the inner and outer bearings and races, the grease...
    view full answer...
    Image 1 for
  • How To Determine What Hub Assembly is Needed With a Bearing Inner Diameter of 3/4 Inch
    The Dexter Trailer Hub Assembly - 4 on 4, part # 8-91-05UC1, uses the # L44649 bearing as the inner and outer bearings. The inner diameter of the bearing is 1.063 inches (1-1/16). The only bearing I have that has a 3/4 inch inner diameter is the Redline Bearing, part # LM11949, which is used as an outer bearing on the Agricultural Hub Assembly - 4 on 5, part # AH15450ECOMP. This is a hub that has a 4 on 5 inch bolt pattern and is used for low speed (less than 20 mph) agricultural applications....
    view full answer...
  • Replacement Hub for Old Pontoon Boat Trailer With L11949 and LM67048 Bearings
    It sounds like your existing hub uses a LM67048 inner/LM11949 bearing. The only hubs we offer that would be compatible with that bearing set would be an agricultural hub like # AH15450ECOMP which is meant for low-speed use (20 mph or less) on equipment like implement wagons and other agricultural equipment that's not used on public roads. Since you have a pontoon trailer, your best bet would be to either have the spindles replaced with weld-on spindles that are compatible with modern,...
    view full answer...
    Image 1 for
  • Replacement Axle For Trailer With Obsolete DICO 15638 Brake Drum Assemblies
    You are going to have to replace your axle as the only hub we currently have that uses your bearings sizes is the Agricultural Trailer Hub Assembly # AH15450ECOMP. This will not work for a replacement due to you having a braking axle. We do have replacement axles like the Trailer Axle w/ Electric Brakes # e43SR that will provide you with all new, up to date components to replace your obsolete components. I will need some more information on your current axle dimensions and weight capacity...
    view full answer...
  • Trailer Hub with Inner Bearing LM67048 Outer LM11949
    We do have a hub that fits with your bearing numbers with the # AH15450ECOMP but the hub you mentioned does not fit
    view full answer...
  • Hub Recommendation for Trailer Spindle that Measures 1.25 and .75 inches
    It sounds like you are in need of an agricultural hub like the part # AH15450ECOMP that has a diameter of .75 where the inner bearing rides and 1.25 inches where the outer bearing rides. This hub has a 4 on 4 inch bolt pattern so if you needed one with a 5 on 4-1/2 inch bolt pattern you would want the part # DX22XR.
    view full answer...
  • Replacement Hub Assembly That Uses Inner Bearing LM67048 and Outer Bearing LM11949
    Currently the only hub we carry that uses the Inner Bearing # LM67048 and Outer Bearing # LM11949 is the Trailer Hub Assembly # AH15450ECOMP. This is a idler hub that is to be used on 3,000lb axles. It has a 4 on 5" bolt pattern and uses threaded bolts rather than lug nuts to hold on the wheel. The bearing races are preinstalled so you will only need the bearings listed above, Grease Seal # SL150 and Grease Cap # TRAG-DC-196.
    view full answer...
  • Recommended Replacements for a Trailer Hub With an LM67048 Inner Bearing and LM11949 Outer Bearing
    It sounds like you have an agricultural style hub, like our part # AH15450ECOMP. In reality, replacement items are available for your current setup, but because you mention that this a boat trailer, your best option would really be to switch out to an EZ-Lube assembly. The current agricultural hub might hold up if you are just submerging them once or twice a season, but for repeated use you will really want to switch out the spindle, hub, and wheels. I would recommend going with EZ-Lube...
    view full answer...
  • Replacement Hub for Axle With 09074 Outer Bearing and 15123 Inner Bearing
    We do have one possible hub that would fit your spindle but it is an agricultural hub which is designed for low-speed applications. The Trailer Hub Assembly - 3,000 lbs Axles # AH15450ECOMP uses the same size bearings you currently have. I was unable to find the dimensions of that 1138758 seal but the grease seal on this hub has an inner diameter of 1.50". This hub uses a 4 on 5 bolt pattern. If this will not work as a replacement for you, your best option may be to replace the axle on...
    view full answer...
  • Replacement Hub Assembly For A Light Duty Snowmobile Trailer
    I am afraid we do not carry any hubs that will fit your parameters. The .75" ID bearing is highly uncommon these days. We carry only one hub that uses a .75" Bearing with part # DX22XR. The problem with this is that the inner bearing for this hub is a 1.25" ID, so this will not work for your application. As far as the seal, the closest seal we have to the 14848 seal is our Grease Seal # 10-9. This grease seal has the same 1.5" inner diameter but is slightly smaller at 1.987" outer diameter...
    view full answer...
  • Replacement Axles for 1977 Giroux Tandem Axle Boat Trailer
    We do offer one idler hub kit that will fit your spindles, Redline # AH15450ECOMP, which has a 4-on-5 bolt pattern. In your 5-on-4-1/2 pattern we have no hubs that will fit your spindles. New hubs must use the same bearings in order to fit your spindles. You can have a qualified welder with the required jigs replace your spindles, or you can replace the entire axle assemblies. We offer beam axle kits as well as bolt-on axle-less suspension kits that can provide better ground clearance...
    view full answer...
  • Agricultural Hub Availability
    It sounds like you have an agricultural hub like the part # TRU54FR that has a diameter of .75 where the inner bearing rides. You will need to measure the spindle of your trailer to verify this. Where the outer bearing rides will need to be 1.25 inches, the seal surface diameter 1.50 inches. The only hub we have to fit this hub would be the part # AH15450ECOMP.
    view full answer...
    Image 1 for


< Previous



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeff D
Installed by:
Jeff D
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Written by:
Michael B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.