bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 5 on 4-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub with Integrated Drum
  6. Standard
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased

Item # AKHD-545-35-K
lowest price pledge
Our Price: $77.63
Trailer Hubs and Drums
Orders above $99 qualify for Free Shipping
Shipping Weight: 20 lbs
Quantity: 
In Stock
etrailer Trailer Hubs and Drums - AKHD-545-35-K
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Lowest Prices for the best trailer hubs and drums from etrailer. Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased part number AKHD-545-35-K can be ordered online at etrailer.com or call 1-800-496-5010 for expert service.
  • All Info
  • Reviews (336)
  • Q & A (0)
  • Photos
  • Why etrailer?

etrailer by AxleTek Trailer Hubs and Drums - AKHD-545-35-K

  • 5 on 4-1/2 Inch
  • For 3500 lbs Axles
  • Hub with Integrated Drum
  • Standard
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • 1/2 Inch Stud
  • L44649
  • L68149
  • etrailer

Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.


Features:

  • Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
    • Compatible with electric and hydraulic drum brakes
  • Sturdy iron construction
  • Zinc-enriched paint on drum adds durability
  • Zinc-finished bolts resist corrosion
  • Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • Bearings, races, grease seal, grease cap, and lug nuts are included
  • QAI and CSA certified


Specs:

  • Application: 3,500-lb axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Actual drum dimensions: 10-15/16" diameter x 2-11/16" wide
    • Works with 10" brake assembly
  • Bolt pattern: 5 on 4-1/2"
  • Wheel studs: 1/2" diameter x 1-1/4" long
  • Grease cap flange diameter: 1.988"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Thoroughly Tested for Safety

This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.


Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


KBD2-545-19 AxleTek 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - Pre Greased

Compare to Dexter 84546UC3






Customer Reviews

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased - AKHD-545-35-K

Average Customer Rating:  4.9 out of 5 stars   (336 Customer Reviews)

Install this hub-and-drum assembly on your trailer. Compatible with electric or hydraulic brakes. Fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.

by:

The hub and drum assembly came with inner and outer bearing pre-installed ( as per my request) from Alex at etrailer. All the parts needed to assemle were there and made installation easy.




by:

Great quality they have all the parts you need. Delivery was earlier than expected. Will be using the brake kit for boat trailer. Replace old out dated hydraulic brakes.


Comments
All working great
Rick - 03/02/2021


by:

Item arrived quickly and intact. Installation of the brakes and drums took a couple of hours and were very easy. Brakes and drums worked very well. I may change the other axle drums next. Thanks.


Comments
I loved the way the new parts helped my trailer tow. It was smoother and more secure. I have now sold this trailer but when I need new equipment I will seek the same parts
Keith - 07/31/2018


by:

Our racing season almost came to a quick halt when my Haulmark trailer had a bearing explode, taking out the hub. I found e-trailer by accident and ordered a complete hub and bearing kit. The price was amazing, the quality was amazing and to top it off the company upgraded the shipping and I had it in two days! I am impressed with not only the quality but all the information on the website to include the videos and tech tips. Because of the experience, I have decided to add new bearings and hubs all the way around. Well done!! Off to the drags that I did not think we would be attending this weekend!

Phil Landram
Eazy Money Racing
BB/FC 3606




by:

I was really pleased that all my parts shipped so quick!! and surprised too! Well the shipping department did a bang up job of getting it out too! and when I got home from work Wednesday (the day they said it would arrive) I had 3 boxes setting on the front porch! Due to other commitments, I couldn't start my repair till today. everything work just great!! Everything looks good! I have included picture of the parts!! When I need parts from now on for the TT, It etrailer.com for me!! Thanks Gene




by:

Added brakes to my 17 ft. Trailer. Brakes went on perfectly and these drums matched with no problems. Once again quick delivery and no issues.


Comments
Great, this trailer has been to Idaho twice and getting ready to go again. No issues and working perfect
Roger F - 08/17/2019


by:

Order arrived in time and the install went well. The trailer brakes work great.
Thanks to Etrailer for supplying everything beeded for another successful project.




by:

Perfect fit. Bearings prepacked with grease. Arrived a day early.




by:

Worked perfectly on an older trailer, and fit right over the brake assembly.




by:

I ordered these hubs/drums as a pair, they included the bearings, races, seals, lug nuts and dust caps. They had a painted coating on the outside to prevent corrosion and they bolted right up. I would recommend.




by:

I needed to upgrade the brake system on my boat trailer. I found the company that made the surge brakes had gone out of business. I found etrailer and bought everything I needed to convert to electric brakes. The pieces arrived quickly with great instructions, everything fit as it was supposed to, and the whole system works beautifully.
Great company to work with. A+ in my book.


Comments
I hate to say it but sometimes bying online is a downer. Everyhting i bought from here has been perfect. Even the wheels still look like new. GREAT STUFF!
Robert L - 07/19/2021


by:

they have a fantastic customer service system and knowledgeable people who help you solve problems in a very short time. I've received my parts and have yet to use them but they look well assembled and I am happy with them thus far.




by:

Called on Saturday morning, delivered on Wednesday, talked to
korren about what I might need, as trailer was 15 years old and never had to replace brakes. Axle tag was unreadable. Trailer has about 30 thousand miles, all long haul, but well maintained. Told her what I was after or thought I might need. Yup, I will ck got back to me in phone call, said what I needed. I like the way etrailer is able to answer your questions by a real person or reading reviews. Thanks again.




by:

Great customer service. got the parts I needed. had them for a year. still working fine.




by:

Great variety of products. Quick service. Plus the staff is fantastic.




by:

they were just what i needed with a reasonable price and was delivered a day ahead of time




by:

Thank you for the great service getting my trailer hub to me way ahead of the scheduled date. Thanks to Alex with his assistance in making this happen. I am very pleased with the my trailer hub and parts and would recommend etrailer.com to anyone for their trailer wheel parts.




by:

Etrailer supplied me with all proper parts and service. I didn’t know much about the project but after talking with Bryan W from their staff I was confident he ordered me the right parts for the job. Shipping was super fast and I couldn’t be happier with my experience. I’ll definitely be a return customer when working on my other trailers in the future. Thanks for the great service




by:

Just what I needed to convert my Hayes 3500 lbs axle from 5 on 5 1/2" axles to 5 on 4 1/2" axles to use on my trailer project. Thank you!




by:

Correct fit for 67 Caravel




by:

Fit perfectly! Everything fit perfectly, no issues! Shipping was quick, also.




by:

Just like every time, found what I needed on your website, ordered it, and it came very quickly! Can't beat it!




by:

Trouble free, extremely simple install, convenient and reliable. Win win all the way. Will definitely buy again if needed




by:

Perfect fit, fast shipping




by:

Very impressed!!! Quick shipping and very reasonable priced. I would definitely share this site with my friends. Etrailer will be my first choice when it comes to my trailer parts.



25
338
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums



  • Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
    The difference between the standard and EZ hubs is in the grease cap. For instance, the Trailer Hub and Drum Assembly - 3,500-lb E-Z Lube Axles # AKHD-545-35-EZ-K is the same hub, bearings, seal, and races as found in # AKHD-545-35-K but the grease cap is different. The grease cap is not only longer on the E-Z Lube Hubs but also has a rubber plug. The purpose of the length and the plug are to have enough room for and access to the grease zerk fitting integrated into E-Z lube axle spindles....
    view full answer...
  • Difference between etrailer.com Hub/Drums AKHD-545-35-K and AKHD-545-35-EZ-K
    You are correct. The only difference between the two hubs you mentioned # AKHD-545-35-K and # AKHD-545-35-EZ-K is the grease cap. The # AKHD-545-35-EZ-K has a rubber plug on the grease cap to allow for easy access to a zerk fitting on an EZ lube spindle whereas the # AKHD-545-35-K has a cap that does not have the plug.
    view full answer...
  • Correct Replacement Hub/Drum for 1994 Haulmark Elite 24' Trailer
    The Trailer Hub and Drum Assembly part # AKHD-545-35-K for standard or part # AKHD-545-35-EZ-K for easy lube are what you need to replace the hub on a 1994 Haulmark Elite 24' Trailer.
    view full answer...
  • Replacement Hub for AxleTek Hub # BD2-545-17
    The exact replacement hub assemblies you need for your BD2-545-17 are the etrailer Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K that you referenced.
    view full answer...
  • Correct Replacement Hub/Drum for Starcraft Boat Trailer 3,500 Lb Axle 1.379" Inner and 1.06" Outer
    It sounds like you have a pretty standard 3,500 lb axle therefore you can use the Trailer Hub and Drum Assembly part # AKHD-545-35-K or part # AKHD-545-35-G-K for galvanized (better for salt water).
    view full answer...
  • Replacement Hub and Drum Recommendation for 2004 Trail Cruiser Travel Trailer
    So since we know your trailer has 2 Dexter axles with 10 inch brake assemblies the correct hub and drums you would need are the part # AKHD-545-35-K that you referenced.
    view full answer...
  • What is the Proper Torque Range for Trailer Wheels
    The correct torque specs for lug nuts will depend on certain variables such as wheel size, wheel material, stud size, and stud type. The most common torque spec for trailers is around 90-100 ft. lbs. I have attached our wheel nut torque specifications chart for you as well.
    view full answer...
    Image 1 for
  • How to Pick Out 10 inch Trailer Hub/Drum for Trailer
    Most likely what you need is the part # AKHD-545-35-K as this matches the things you listed. This is a 3,500 lb hub/drum with a 5 on 4-1/2 inch bolt pattern. This fits the standard 3,500 lb axle spindle. You'll want to measure the spindle on your trailer to verify this. If the bearing surfaces are 1.378 for the inner diameter and then 1.063 for the outer bearing surface this would be what you need. Or if the bearing numbers are L68149 and L44649 that is the other way to verify this.
    view full answer...
  • Hub/Drum Recommendation for 18 ft EZ Dumper Trailer
    Your picture didn't make it through. But to pick out drums you'll need to get me the diameter of the spindle on your trailer or the numbers off of the bearings.
    view full answer...
    Image 1 for Image 2 for
  • Replacement Hub for a Lippert LCI 126003 Hub
    I was able to find the 126003 hub and was able to determine that it is a 3,500 lb hub/drum with a 5 on 4-1/2 inch bolt pattern just like the # AKHD-545-35-K that you referenced. This hub will work as a replacement for your Lippert.
    view full answer...
  • Replacement Spindle, Bearings and Hub for 26-foot Prowler M26C Travel Trailer
    We can help you select replacement spindles, bearings and a hub for your 26-foot Prowler M26C travel trailer. I could not find detailed specs for the trailer but it is simple enough to match up bearing part numbers; these will tell us what hub you need and also what spindle. Note that a new spindle must be welded on perfectly concentric with the axle; specialized welding jigs are required for this and only a professional welder should attempt the installation. For new bearings and a...
    view full answer...
    Image 1 for
  • Replacement Hub for Older Dexter 8-245
    The part number 8-245 is an obsolete part number but I was able to find some info on it. It was basically a 3,500 lb hub and drum that fit a 84 spindle. Because of that we have a solution that will fit. The part # AKHD-545-35-K is a 3,500 lb hub/drum that would fit the spindle you have on your trailer. This hub does have a 5 on 4-1/2 inch bolt pattern which is most likely what you have on your trailer but if not I attached a link to a page that has all of the hubs we carry that would fit.
    view full answer...
  • What Spindle Dimensions Does Trailer Hub and Drum Assembly AKHD-545-35-K Fit
    For a trailer as old as yours I can say that it's pretty unlikely any of the hubs made currently are going to fit since designs have changed since then. But someone could have updated the axle to something newer so you never know. So the spindle of your axle would need to have diameters of 1.378 and 1.063 where the bearings ride for hub # AKHD-545-35-K to fit.
    view full answer...
  • How To Measure a Trailer Hub/Drum for Replacement
    In order to correctly measure a hub/drum you'd need to do so on the inside, where the shoes ride. I have attached a photo below that shows this. The Trailer Hub and Drum Assembly part # AKHD-545-35-K for example measures 10" x 2-1/4". I have attached all of our options below.
    view full answer...
    Image 1 for
  • Replacement Hub Solution for UFP HD1377 Hub
    We have had a customer with your same UFP hub HD-1377 successfully use as a replacement the hub/drum # AKHD-545-35-K which works on 3500-lb axles. This hub uses inner bearing # L68149 (1.378" inner diameter) and outer bearing # L44649 (1.063" inner diameter). If your original hub bearing numbers or inner diameters match this will work fine. This has the very common wheel bolt pattern of 5 on 4-1/2 inch.
    view full answer...
  • Replacement Hubs/Drums and Braking Assemblies for a Vintage Stidham Horse Trailer
    I was not able to reference the provided part number "10-200". Therefore, you have two options to find the correct replacement hubs/drums and braking assemblies. You can either A) find the serial number on the axle or B) measure the spots on the spindle where the bearings/seal ride and read the part numbers on the bearings themselves. I would also need to know the dimensions of your braking assemblies and what brake mounting flange you have. In regards to bolt pattern, there is not a direct...
    view full answer...
  • How to Determine Bolt Pattern Of A 5-Lug Trailer Wheel
    If you measure from the center of one hole to the center of the next hole and it measures 2-5/8 then your bolt pattern is 5 on 4-1/2. 2-3/4" is 5 on 4-3/4 bolt pattern. 3" is 5 on 5 bolt pattern. 3-1/4" is 5 on 5-1/2 bolt pattern. I have attached a link of the 5 on 4-1/2" bolt pattern wheels and hubs we have available.
    view full answer...
    Image 1 for
  • Does Replacement Hub Just Need Bearings That Matched Previous Hub
    Yes, so long as you find a hub that has bearings that matched the hub you had previously, the hub will fit your spindle. For example, if you had a hub with inner bearing L68149 and outer bearing L44649 you would use Trailer Hub and Drum Assembly - 3,500-lb Axles # AKHD-545-35-K. I have added a link below to our entire selection of hubs for you to check out, and you can filter through them by bearing number to find the correct one.
    view full answer...
  • Will etrailer Hub and Drum # AKHD-545-35-K Fit an ALKO Axle
    The etrailer hub and drum assembly # AKHD-545-35-K is compatible with your ALKO axle. It is compatible with just about anything including ALKO but also Dexter and Lippert. These 3 companies (technically 2 since Dexter bought that division of ALKO) make up the majority of trailer axles in the industry.
    view full answer...
  • Maximum Inside Drum Diameter of 3,500 lbs Hub # AKHD-545-35-K
    The Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K has a maximum rebore drum diameter of 10.09 inches. This means the interior diameter cannot exceed that diameter and if exceeded will not work properly, so a replacement is recommended. Re-boring is not recommended by AxleTek (the manufacturer) because re-boring risks contaminating the bearing cups and risks not machining concentric to the Axis. This also voids the warranty on the entire wheel-end...
    view full answer...
  • Is Trailer Hub and Drum Assembly # AKHD-545-35-K Sold By Itself or in Pairs
    Trailer Hub and Drum Assembly # AKHD-545-35-K is sold in quantities of 1. It can be used as a right or a left assembly so if you do need to replace 2 of them you would need to change the quantity to 2 before adding them to your cart. I have included a link to a video on this assembly for you.
    view full answer...
  • Replacement 3,500 lb Hub and Drum for Forest River with Dexter 3,500 lb Axle
    Do you know the capacity of the axle and the wheel bolt pattern?
    view full answer...
  • Correct Replacement Hub and Spindle for Lippert 126003 Hub
    The correct replacement for a Lippert Hub 126003 is the Trailer Hub and Drum Assembly part # AKHD-545-35-K. Most spindles are not replaceable, if it's damaged you'd need to get a new axle. The spindles are not really a wear item so they will only be replaced when damage has occurred. If you need a new spindle you'll have to reach out to Lippert directly for an axle replacement.
    view full answer...
  • Info Needed to Pick Out Replacement Hub/Drum for Trailer Axle
    In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. Since we know you have a bolt pattern of 5 on 4-1/2 inches that takes care of that. Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from...
    view full answer...


< Previous
123. . .10



Do you have a question about this Trailer Hubs and Drum?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer hubs and drums for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer hubs and drum information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Jackie C
Expert Research:
Jackie C
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Randy B
Installed by:
Randy B
Employee Jacob T
Video Edited:
Jacob T
Employee Chris R
Video Edited:
Chris R
Employee Alexander C
Updated by:
Alexander C
Employee Zach D
Video by:
Zach D
Employee Jonathan Y
Video by:
Jonathan Y
Employee Shane H
Test Fit:
Shane H

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.